What's Chris Cole's Board Setup?!
Рет қаралды 90,155
Күн бұрынWatch the full episode: • Chris Cole - Stop And ...
Subscribe to our KZfaq channels:
The Nine Club: / @thenineclub
Nine Club Highlights: / @nineclubclips
2dudes1game: / @morenineclub
Want to support us? Become a member: / @thenineclub
New Nine Club episodes every Monday and Nine Club Experience episodes every Wednesday
--------------------------------------------------
This Episode brought to you by:
Manscaped - Enter NINECLUB20 for 20% off: www.manscaped.com
Santa Cruz Skateboards: santacruzskateboards.com
Mob Grip: mobgrip.com
Ricta Wheels: rictawheels.com/
Check out all our Deals and Discounts: thenineclub.com/pages/deals-a...
--------------------------------------------------
Want more Nine Club? Check out these playlists:
The Nine Club: • The Nine Club
The Nine Club Experience: • Nine Club EXPERIENCE Live
Nine Club Highlights: • Most Recent Clips
Pick up official Nine Club march: thenineclub.com/collections/all
Chris Roberts Chocolate Decks: thenineclub.com/collections/d...
Listen to The Nine Club on audio podcast: thenineclub.com/pages/podcast
Contact us: thenineclub.com/pages/contact
----------------------------------------
Edited By: Chris Roberts & Roger Bagley
Special Thanks: Eric Longden
----------------------------------------
Follow The Nine Club:
Instagram: / thenineclub
Twitter: / thenineclub
Facebook: / thenineclub
Website: thenineclub.com
Follow The Nine Club Experience:
Instagram: / thenineclubexperience
Follow Chris:
Instagram: / chrisroberts
Cameo: www.cameo.com/chrisroberts
Twitter: / chris_roberts1
Snapchat: / chris_roberts1
KZfaq Channel: kzfaq.info?...
Follow Jeron:
Instagram: / jeronwilson
Follow Kelly:
Instagram: / kellyhart
Twitter: / kellyhart
Snapchat: / kellymhart
Facebook: / kellyhartskate
Products we use to make the show: www.amazon.com/shop/thenineclub
What's Chris Cole's Board Setup?!
#Skateboarding #Podcast #Interview SandC
@crzes9702 3 жыл бұрын
I remember working as a bike messenger in Philadelphia in 1999-2000. I was at Love Park, and had my bike hanging from a tree by the seat at the top of the fountain. Chris was there for a photo shoot, and was hitting a bench down the first stair set to the side. I felt like I was in the way so I offered to move and take my bike out of the tree. The photographer stopped me and said the bike was "the whole shot." A few weeks later, I was looking at a skate mag in Rittenhouse Square, and there was my bike in a sequence. I felt like I had made it lol.
@viniciuslima9068 3 жыл бұрын
glad to hear dude, but, you have that pic? +))
@crzes9702 3 жыл бұрын
@@viniciuslima9068 Sadly, no. I thought about stealing the magazine from the Barnes and Noble, but I guess I'm too honest even for my own vanity.
@viniciuslima9068 3 жыл бұрын
@@crzes9702 hahaha its ok dude, great to know that! =)
@DARRENTINOnz 3 жыл бұрын
Sick, I regret making a big effort to get out of frames, now it sucks seeing nostalgic photos knowing you're standing 2 feet outta shot
@crzes9702 3 жыл бұрын
@@DARRENTINOnz I was there the day Kalis tre flipped the trash can. I almost made his "Truth" shoebox cover, but i got up because my homie had beer. Ryan Gee was standing right behind the can shooting stills, and they edited him out of the photo. lol. Fun fact.
@patrolofficer7839 2 жыл бұрын
Why is Kelly only either seemingly confused with a legitimate look of terror on his face or laughing hysterically?
@mohamedghareb5940 2 жыл бұрын
Lmfaooooo
@TheRealWarez Жыл бұрын
This is the best "Board Setup" video out of the whole playlist. Need more like this one. Thank you for the video!
@TrevFlips 3 жыл бұрын
Chris Cole set up; Deck- 8.5 Trucks- thunder high, 149 , with bones hard bushings Wheels- 52 wide Bearings- bones Swiss with no shields
@macewbee 3 жыл бұрын
Ok thank
@larelare1 3 жыл бұрын
No bearing spacers, triangle drawn on a spot a switch heel would cover up (back foot of regular stance).
@TysonHook-22- 3 жыл бұрын
Tight trucks! with a slightly looser front truck
@mr.neqtan 2 жыл бұрын
What about them 7/8 Allen though
@Pompazo94 Жыл бұрын
What’s the wheelbase?
@beneflaco 2 жыл бұрын
My first deck at 14 was a 7.5 zero/chris cole deck. The zero team was the reason I started skating.
@sk845ny2 3 жыл бұрын
I'm a tight truck guy. Wheel bite a big reason.
@Mystninja 3 жыл бұрын
I hate it when you get called names for skating tight. So over the years I did skate loose.
@PhaseSkater 3 жыл бұрын
@@Mystninja for real. all my friends keep telling me to loosen them
@Mystninja 3 жыл бұрын
@@PhaseSkater tbh I change my truck tention. More then I change my socks. But Height and truck size have alot even board size have alot to do with how your trucks feel. Even temperature.
@Mystninja 3 жыл бұрын
@@PhaseSkater I'm 6'1 7 68kg and US10 shoe. I ride 7.75. Thunder 145 mainliners with hardcore bones mid bushing. Kingpin nut is just at the nylon. 52mm 101a wheels no riser. Then my crusier board is a 8.88 Indy titanium 149 with hardcore bones hards. Kingpin nut at the nylon give or take one turn up or down. And globe 60mm 80a Longboard wheels 3mm rubber riser. Too different rides for too different styles. Same rider.
@PhaseSkater 3 жыл бұрын
@@Mystninja 6'1'' and size 10 shoe? geex must be hard to balance
@vladimirpiroshki5718 3 жыл бұрын
Chris: *explains where the triangle is on his board* Kelly and crob: Chris: the only time my foot is on it is on a switch heelflip Kelly and crob: OOOHHHHHH GOTCHA
@6lu5ky86 Жыл бұрын
Best setup video yet. While Chris is obviously speaking only from his experience he expresses it in a way that's flexible and valuable for other skates. Kudos.
@AlexNiedt 3 жыл бұрын
Always good to hear from a pro who rides tight trucks. I tried loosening up recently, and it's just not for me.
@neuralbliss 2 жыл бұрын
Same with Andy Anderson, Jagger Eaton, both super tight trucks.
@bryanprol2932 4 ай бұрын
@@neuralblissLMAO the 2 pioneers of good style huh?
@Twuntt 3 жыл бұрын
The fact that he brought up Randy Rhoads got me so hyped.
@Rand_al_Thor372 3 жыл бұрын
Real Talk!!!
@mr22turner 3 жыл бұрын
Fully!
@TRAVIESO_NA 3 жыл бұрын
Facts
@Rand_al_Thor372 3 жыл бұрын
I sent the clip to Randy & gave him the time stamp. He still trips out when ppl bring his name up in 2020. How, you ask? Its a long ass story (ive written a book about all of it) but it starts here.. worlditc . org ITC- Instrumental Transdimensional Communication Its real & its AMAZING!
@fullkomboz6492 3 жыл бұрын
Lana rhoads brother ?
@2saddads 3 жыл бұрын
I love that thefes an explanation for every part of the skateboard thats so rad
@militaryminedid2011 3 жыл бұрын
Love watching a 25 minute video on a board setup. I run 8.5 decks usually with Indy TI 149's and Bones Hards, tight as well. What a trip. Crazy thing is my current setup is a 8.5" Cole Plan B P2 deck I had sitting and this video came out...I love it. Good to see him on here. Dude rips and is a legend!
@deadbodybaby1 3 жыл бұрын
He said it’s all wheel drive 🤣🤣🤣🤣
@60napik 3 жыл бұрын
What a very nice and real conversation about skateboarding 🛹! Totally awesome!
@gonzo13ist 3 жыл бұрын
I love when we talk strictly skateboarding!
@user-eb3km1ne5h 3 жыл бұрын
There’s so much to learn and absorb lolol
@milessmith4727 Жыл бұрын
word
@MrWookieewonder 3 жыл бұрын
About the spacers. 100% put them in. They're a pain to get them to work properly but it's so worth it. They need to be very slightly wider than the wheel core, if not use a very thin speed washer to widen them inside the wheel. Tighten the wheel nut snug all the way down, hand tight but don't go crazy as you will deform the bearing race and they'll slow and click and pop. This is why it's so worth it. Because the assembly is now a solid unit your truck axle is now around 12mm thick as apposed to being 8mm. You're much less likely bend an axle now. The bearings will be held in perfect alignment and last forever and roll free and faster due to zero side loading slowing them down. No more axle slip ever!!! The only negative is your board will sound different. Like mutated and quiet and very smooth but after a few weeks I got used to it. The wheel should still spin just as free as when the nut is loose. You will have a faster, more efficient board.
@13bro45 9 ай бұрын
Skating is a lot about the feedback you get from the board. Half the pleasure in riding is hearing the acoustics of a skateboard. Absolutely savage wheel screech from a fat powerslide or a tail slide on transition is something i cant ever give up. If it means i need bearings every 3 months or so then so be it. Even the sound of popping the board up into your hand and throwing down.
@larryjimbob 3 жыл бұрын
Totally agree about the trucks, so important. Once I've got mine broken in and just right I never touch them if I can help it 👍😊
@Bravo-Too-Much 3 жыл бұрын
Tight trucks with shortys dohdoh rock hards on an 8.5. It does not limit my turning at all, if I wanna turn I turn. The stability and control just seems so much more apparent.
@visualmeditation7593 3 жыл бұрын
"because the thing doesn't do the thing, but your mind does do the thing because your body has the thing on it" chaos magic
@im-pro-at-skyrim8285 3 жыл бұрын
I've shaved soap into my pivot cups and they never squeaked again
@CarsCatAliens 3 жыл бұрын
Do you live somewhere is stays warm year round ? Just wondering if the soap changes with the weather..
@nicoluminous 3 жыл бұрын
gunna go crank my trucks now and take some laps around the block
@AvnerRosenstein-ULTRA-LXV 6 ай бұрын
@10:22...coolest guitar ever made imo. Plays like a dream too!
@sluggdiddyyddidgguls 3 жыл бұрын
used to see chris cole at the tiny little skate spot at the yardley kennels right by my house when I was really young. Everyone knew he was going to be huge back then.
@gregprymicz9947 3 жыл бұрын
I ride super tight trucks because it takes away an axis of balance, so I focus on the trick and not the balance. Tricks come out cleaner as well. I also I skate with on my tail, and nollie and fakie from the nose. But no one really cares.
@robertklowe 3 жыл бұрын
shave some wax into the pivot cup to stop it squeaking
@one_mega_ohm9139 3 жыл бұрын
auto grease baby
@godownondebbygang3456 3 жыл бұрын
This actually works the best
@heroicsquirrel3195 3 жыл бұрын
Oh shit, thanks
@Triminfernau32 3 жыл бұрын
I'd love to see a theories compilation vid!
@Namegamenamename 3 жыл бұрын
Yeee
@Johanthegnarler 2 жыл бұрын
Don't stop selling those 8.25 twin tails Chris. Love the shape and kicks. Give me some wild graphics and I'm in forever
@nettykunai4842 3 жыл бұрын
Love these vids, keep it up!
@lukendestroy2386 3 жыл бұрын
If there's any truth to that ankle theory then that explains why my ankles are starting to deteriorate at 29
@crzes9702 3 жыл бұрын
Mine took a shit on me 15 years ago. At 30.
@CoreyJames-ed7oe 3 жыл бұрын
ive been skating tighter trucks for 30 plus years. im 49. my ankles are fine.
@lukendestroy2386 3 жыл бұрын
@@CoreyJames-ed7oe do you find you just generally roll your ankles less than your friends that skate loose trucks? I'm just realising now that I skate the loosest trucks out of my homies and I roll my ankles way more than them
@MinecraftBoss4Ever 3 жыл бұрын
My trucks were tight and when I would roll off my ankle would do exactly like he said it would just roll it never sprained it cause it wasn’t tensed up I rode a loose truck board and can feel I tighten my ankles to keep the board balanced
@MinecraftBoss4Ever 3 жыл бұрын
It’s makes sense you know your most likely to tear something that’s tensed up
@Gbpslo Жыл бұрын
Chris Cole was like the best skater on earth for at least a couple years when I was skating growing up nobody had parts like him
@Nishikarchandel 2 жыл бұрын
That's the best nine club setup video he explained every aspect of every part
@AntiqueLanternPro Жыл бұрын
Just put this on doing things listening with Bluetooth so it took me almost 14 minutes to realize they put that mic up to the screen for him like he was there. Hilarious. That's points for whoever thought of that one.
@michaelimperato9125 3 жыл бұрын
Trucks always super tight..front looser than the back, I like them tight the back truck stable..I ride 55s, been skating an 8.25 since 96..my first board was a girl Jovante turner, blue and orange..stereo and real had the best shapes back in the day 96 ish
@michaelweber6503 3 жыл бұрын
Love when they theyre a nut for specificity
@sudo9866 3 жыл бұрын
Another small fact you can take graphite dust and lubricate your bearings with it. Also you can clean your bearings with carburetor cleaner, you can also balance your deck with lead tape with your board balanced on the tip of a nail, yes I do all of this .no I'm not mad. Been skating for 23 years
@mr.neqtan 2 жыл бұрын
Been thinking about the use of graphite/dry film for bearings. Fill in the micro surface abrasion.
@karlkidd1 Жыл бұрын
Tight trucks!! Always & forever the sickest style
@jackjames1 25 күн бұрын
lol we used to sell power balance bracelets at the skatepark and I’d see ppl with them on both wrists and both ankles
@Mystninja 3 жыл бұрын
Soap bar. Rub it on the hangers where the bushings and pivot cup are. With the soap bar the more girly crap that's in it the better. And if you take a soap bar skating it's good wax that washers away.
@nrxhavoc 3 жыл бұрын
Chris Cole is a board wizard lol
@Zuhma 2 жыл бұрын
The board in the thumbnail was my first skateboard I ever got, at least that I remember. I might have had a walmart board before hand but I was so young I can't remember. I got Chris Coles pro model when I was about 5
@ibookboyuk 3 жыл бұрын
Really good episode, guys. Very informative. Two very quick things. One: I believe in spacers and always have. Two: it’s a fine solution but instead of taking my trucks apart to sprinkle graphite powder in my pivot cup I spray WD-40, another lock lubrication product, in the pivot cup
@mr.neqtan 2 жыл бұрын
Wd-40 is not a good product for plastics. Spray silicone lubricant would be optimal. Have to clean up any excess for sake of debris collecting.
@profo4544 Жыл бұрын
ive always heard and tried recently small amount of wax either wax for skating or off a candle, i tried it recently one of my pivot cups is a little noisy i put a tiny bit in it and it made it completey go away, but it came back but not nearly as bad. Ive heard of alot of things tbh, ive never heard graphite tho this is ltierally the first time ive heard anyone say that lmao. WD-40 is like the morons liquid to loosen anything up, it shouldnt be used like that. It probably will dry out and mess up the eruthane the cups are made out of. Ur better off using wax honestly
@13bro45 9 ай бұрын
just use wax lmao
@13FloorsDown 3 жыл бұрын
I'm tight trucks all the way. Wheel bite bad, I'm on the heavier side. I too ride my front truck looser than the back, but probably not as loose as Cole does.
@michaelimperato9125 3 жыл бұрын
Ive always skated tight trucks..i feel like the pop is better...I have way more control
@i.haul.ass_ 3 жыл бұрын
No typa pinch tho
@overkill7990 3 жыл бұрын
I skate my trucks pretty tight. The only reason I'm a little careful with tightening them too much is I don't want them to break or the kingpin or whatever.
@joshwhaley1778 3 жыл бұрын
Best "inside baseball" video I've ever seen?!?!!!
@ericholland-cr1nt 10 ай бұрын
I love listening to this guy talking about skateboarding
@gavinex 10 күн бұрын
btw you can sprinkle sum wax small pieces instead the graphite powder
@user-yv8cb2xb7k 23 күн бұрын
Chris Cole reminds me of the John Wick of skateboarding lol
@MrPDTaylor 3 жыл бұрын
If you have tight in back and loose in front you get the best of both worlds.
@RJ-fi9zo 3 жыл бұрын
I don’t think that’s how it works... if your ankle has tension then it offers more resistance to rolling and tearing your ligaments... I think skating loose trucks makes the stabilizing muscles in your ankles work constantly, thus preventing injury. Just my opinion, not a doctor by any means. Extrapolated this “theory” from watching BrianMD sports injury videos lol
@thijs199 3 жыл бұрын
I skateboarded a long while on loose trucks but I'm gonna go middle ground, I just don't land anything or like once or twice
@JawsHLL 8 ай бұрын
7:45 Although the thing doesn’t do the thing but your mind does do the thing because it has the thing on it.
@SkateboardProphet 2 жыл бұрын
Cole is totally right...one hundred percent..takes longer to get tricks but it gives you the best consistancy..bolts.
@ryanlea750 3 жыл бұрын
ahhhhhhhhh tahts what i do loose front not so loose in the back
@lukasberg7155 3 жыл бұрын
same here
@raiylab 3 жыл бұрын
Doesn't it fuck you up when turning after you do a shuv it? Then it's tight in the front and loose in the back. I imagine it'd be annoying to constantly have to switch your nose and tail around just to ride comfortably
@DARRENTINOnz 3 жыл бұрын
@@raiylab 1 name "Daewon"
@AlexNiedt 3 жыл бұрын
Same
@expertbv 3 жыл бұрын
put a little bit of wax shavings in your pivot cups
@christianowens4104 8 ай бұрын
Another fix for if you have squeaky trucks is to just take them apart and cover each piece in a little bit of wax at the contact points. So pivot cup, and each bushing and where they touch the truck.
@khalliddo1385 Жыл бұрын
About the loose trucks being your ankle tight for my experience i rode tight trucks before i got so many ankle injury but now i ride loose trucks i haven't had a ankle problem maybe its just me tho. Loose trucks saves life for me. 🤙🏼
@eugenepiven2432 Жыл бұрын
I know I'm a couple of years late but you can also use paraffin wax on your bushings and pivot cap to eliminate the squeakiness.
@WhatNotandWhatHaveYou Жыл бұрын
@ 13:18 Kelly demonstrates his rain man like 411 knowledge
@TysonHook-22- 3 жыл бұрын
Never heard the graphite powder squeky pivot cup trick before... another trick is to put a few small shards of parrafin wax into the pivot cup.
@cramerfrenchjr4757 2 жыл бұрын
The ankle thing makes so much sense
@typerightseesight 3 жыл бұрын
I can totally feel the difference on the spacer tho.. it keeps the bearings locked so you can powerslide. they'll wobble around in there without it and you'll get a really weird lean like if your tie rod blows out on a car.
@typerightseesight 3 жыл бұрын
also the adidas dennis busenitz have that heel guard that basically is a bearing spacer stabilizer. so
@henrikfjellheimhansen6669 3 жыл бұрын
@@typerightseesight Hi. can you explain that? what does the heelguard do with the bearings
@typerightseesight 3 жыл бұрын
@@henrikfjellheimhansen6669 your mother
@henrikfjellheimhansen6669 3 жыл бұрын
@@typerightseesight Dude i asked you a normal question and thats how you reply. btw i watched your videos.. seems like you escaped from a mental hospital..
@typerightseesight 3 жыл бұрын
@@henrikfjellheimhansen6669 thanks, henrik.
@rizzorizzo2311 2 жыл бұрын
I also ride very tight trucks. I was recently ridiculed for it by my local shop owner. I just don’t feel any stability with loose trucks.
@cramerfrenchjr4757 2 жыл бұрын
I usually go between 8.25-8.5 149 trucks and 54mm wheels and it’s perfect. Now I’m just going back to 8.5
@robertl6770 2 жыл бұрын
I ride super tight too. I've never had wheel bite or seriously injured my ankle. I can't ride loose for the same reasons.
@gfeast4518 3 жыл бұрын
Woah I’ve been busy with school and haven’t watched in a little while, did jeron take rogers spot or something lol
@PhaseSkater 3 жыл бұрын
doesnt want to catch the board on the way up? ANDREW REYNOLDS HAS ENTERED THE CHAT!
@skarceoneafd9609 3 жыл бұрын
Also bones speed cream in the pivot cups makes them quiet and smooth
@CarsCatAliens 3 жыл бұрын
You can save yourself money and just use a little dab of Vaseline
@skarceoneafd9609 3 жыл бұрын
@@CarsCatAliens I already had a bottle of speed cream in my toolbox so I gave it a go and it’s silky smooth lol wax works also
@pr0ph3ce34 3 жыл бұрын
Tight truck gang baby!
@cramerfrenchjr4757 2 жыл бұрын
Chris Cole is the man
@aussiesoulsurfer553 3 жыл бұрын
Tight trucks for me especially nose grinds and 50-50 I feel I a lot more in control
@JaiyTheTriggerTrainer 2 жыл бұрын
This is one of the first comments Ive left on anyone’s video. Chris is MUTHA FUCKIN RIGHT!!!!!! Tight trucks lose ankles your ankle with bounce back. Lose trucks tight ankles. That’s yo ass Mr.postman!!! Rolled ankle!!!
@crowminami6841 3 ай бұрын
Ima a Darewon truck guy as loose as they go without the bolt falling off
@typerightseesight 3 жыл бұрын
I've always skated tight trucks.. but went to medium a few years ago.. but I mean if you loosen them, you might as well go full bore and ride them how they come. LOOSE. took me a few years to finally commit.
@NathanBrooks_Fish91 3 жыл бұрын
Chris cole is the 🐐
@badtaste9497 3 жыл бұрын
This is perfect.
@gavinhell4597 3 жыл бұрын
Legend.
@dneck 3 жыл бұрын
just scooped that ZERO Tommy Sandoval Grim Reefer board. Had to!
@michaelfigueroa1624 3 жыл бұрын
Randy Rhoads flying V is indeed a bad ass guitar!
@typerightseesight 3 жыл бұрын
Here's a good question for him.. Thunders come with one truck a lightning bolt and one a triple line emblem.. Which one does he put up front? The lightning bolt? I'm goofy so I keep it under my front heel.
@zacherynoland8395 3 жыл бұрын
They don't come like that anymore, that was a while back
@typerightseesight 3 жыл бұрын
@@zacherynoland8395 noway! I thought the original model stil does and the team model doesnt have the bolt anymore. crazy. ill rebuild this spring and make a newer version.
@alanbrooks5404 3 жыл бұрын
My trucks are a little more on the loose side, and I roll my ankles a lot. But I hate tight trucks, feels like I can barely turn with them
@seanelovesjiujitsu 2 ай бұрын
an "engaged" ankle tendon would be stronger then your non flexed ankle is more subject to being hyper-extended and damaged
@micktenthof 11 ай бұрын
I've always ridden with tight trucks, never understood why anyone would ride with loose trucks. But then again, I suck at skateboarding too lol.
@allstopblue5717 2 жыл бұрын
This is so good
@peeblanket9796 3 жыл бұрын
Hey chris, remember when you skated umass amherst years ago... me and my freinds saw you getting food at subway downtown amherst... remember?
@turdferguson2 3 ай бұрын
Loose trucks give me anxiety
@jesus-is-rad9684 9 ай бұрын
This what i tell people sometimes... Wanting nothing to do with God is like this... Suppose my birthday was next week.. I invite everybody to come!😊 friends, strangers, everybody... The special day comes!😁 and I show up to my party! And everybody ignores me😢 I got snacks and food ready for my guests.. I hired live bands to play music.. I got my guests gift bags.. I paid a price to have my party and I show up... AND EVERYBODY ignores me ): even more they show disinterest in me.. even contempt.. But I did this for us😢 I made this party for us to enjoy together.
@braulionico Жыл бұрын
The Zero💀 legend
@kamalaharry9514 3 жыл бұрын
Is that the mark gonzales flip book lol
@richtaliaferro6133 3 жыл бұрын
5:55 lol
@Shao.Lin69 3 жыл бұрын
I ride boards from 8-8.25 but for some reason I'm always running 8.25 trucks, my 139s or my 5.2s (indy and ventures) just don't feel right to me, i like 144s with bones buschings or 5.6 ventures with stock buschings i actually prefer ventures these days
@puma0210 Жыл бұрын
139 and 5.2 are too low.
@Shao.Lin69 Жыл бұрын
@@puma0210 depends on your wheels they don't bother me on 52mm or smaller. Honestly I don't even notice after skating a setup like that for an hour or so
@Shao.Lin69 Жыл бұрын
I actually don't think there any lower unless you specifically buy lows in those axle sizes maybe like a mm or 2 then 144s but we all skated 139s or smaller in the early 2000s, fucking tensor lows and shit lol
@joshuajones302 3 жыл бұрын
I mean I skate tight trucks because my flicking ankle just is as strong as it used to be and it’s only just way more support
@aaronmiller9811 3 жыл бұрын
For squeaky trucks all you gotta do is put a little wax on the top and bottom of your bushings.
@friscostreetstories5403 10 ай бұрын
Yea when I have loose trucks my ankles work harder. His theory makes sum sense. Kinda like how a drunk driver is relaxed in an accident and sometimes can walk away uninjured. I run a loose truck up front and a tight back truck .
@CarsCatAliens 3 жыл бұрын
::FUN FACT::: If you just scroll and scan titles, 8/10 times you will read "Chris Cole Beard setup" I was like, I guess thats cool? Wonder if dollar shave club is the sponsor for it
@yevkin75 Жыл бұрын
It was going well until Chris started thinking that only his front trucks turn on a board like a car lol. When you lean to either side of the board, both trucks are going to turn. Then there are kick turns on your back trucks to consider as well.
@Jake-dc8yx 3 жыл бұрын
i ride lose trucks and when i used to ride tight trucks, it felt like the rolled ankles were way more frequent and way worse. thats just me tho
@crooshbeats 2 жыл бұрын
"Think" boards... Flashbacks.
@annakquinn7084 11 ай бұрын
@6:17 Kelly, this is just for talented people. It’s to hard for you.
@rolling4life-media-house.90 3 жыл бұрын
spacer saves your bearings by pinching the bearing race together thus your bearing spins proper .. doesnt stop your axles slipping at all !
@MrWookieewonder 3 жыл бұрын
It will help reduce the chances of axle slip if you do the wheel nuts up snug.
@rolling4life-media-house.90 3 жыл бұрын
@@MrWookieewonder true might reduce , but in 30 years of running spacers and snug nuts .. crap trucks will still slip . axle should never slip even when u grinding through it . never had a indy slip since like stage 6's ? older indys slipped.
Nine Club Clips
Рет қаралды 313 М.
Screen
Рет қаралды 1,5 МЛН