No video
Solid Oak Dining Table
Рет қаралды 292,642
Күн бұрынGet 15% off Mirka Tools (New Zealand ONLY).
Use promo code DUSTFREE at checkout on the Seearco website www.seearco.co...
This is my very first dining table build. The design is quite simple and modern but I wanted to give some detail with the joinery. The oak had some defects which I filled with epoxy which I think gives it more character. I'm also trying out the Mirka Deros orbital sander. This thing is amazing and did so well on the oak.
Get an Offcut tshirt! teespring.com/...
_______________________________________________
My Tools:
Dewalt table saw: amzn.to/3ackejR
Countersink bit: amzn.to/33KaXOK
Music/Ear protection: amzn.to/3fKEb2l
Camera: amzn.to/31P9sfN
Makita track saw: amzn.to/3D7QXVp
Router: amzn.to/2PFz5tu
Pocket hole jig: amzn.to/3a9E3s0
Mechanical pencil: amzn.to/3acH9LH
CA Glue: amzn.to/2NvFE49
(Get 15% off using promo code "OFFCUT15" at www.starbond.c...)
_______________________________________________
Get my plans: gumroad.com/th...
Merch: teespring.com/...
Instagram: / theoffcut_nz
Facebook: / theoffcut
Buy me a coffee: www.buymeacoff...
Support me on Patreon: / theoffcut
@zimmejoc 3 жыл бұрын
My heart sank when I saw that tear out, but the fix was dead on perfect. I love the simple lines of the table. I wish I had the knowledge, skills, and tools to do something even half as good.
@TheOffcut 3 жыл бұрын
Thanks very much! I was relieved to find the piece that chipped out so I could glue it back on. I can't tell which corner it was now!
@zimmejoc 3 жыл бұрын
@@TheOffcut I think it is great you included some stuff that went wrong in addition to all the stuff that went right. That is fortunate you found the tear off. The repair in the video looks perfect. I couldn't see the problem at all, and I'm glad you can't tell the difference in person too.
@wiebl5266 8 ай бұрын
simple, elegant, practical (no obstructions under the table) and very beautiful.
@kushtrimjunuzi 3 жыл бұрын
I want to thank you for this video, I was able to replicate same table for my kids play table 6x3ft, I had to modify little bit but it is looking very minimalistic design and strong structure. Thanks again, btw this is my first comment ever on youtube.
@TheOffcut 3 жыл бұрын
Thats so cool to hear! Thanks for your very first comment! hahaha
@evehummed1875 2 жыл бұрын
Hi I want to contact you
@mrbojangles9841 Жыл бұрын
Welcome to KZfaq comments. I'll warn you not to get into the habit of trolling. It's an addiction on you'll never overcome.
@rwc323 3 жыл бұрын
Wow, beautiful! Thanks for sharing the process :) Especially that chipped corner. That must’ve been devastating and to me the most cherishing part of the process. You overcame it admirably!
@TheOffcut 3 жыл бұрын
Thank you! Yes I was quite annoyed about the chipped corner. I thought about just cutting the whole top shorter to get rid of it but luckily i found the chip and it went back into place perfectly.
@saliyalokeshwara7055 3 жыл бұрын
I love how he cleans on the go. Something we should all practice I reckon
@victorbode5400 3 жыл бұрын
I dont mean to be so offtopic but does someone know a tool to log back into an instagram account? I was dumb forgot my login password. I would appreciate any tips you can offer me
@robertrudy4788 3 жыл бұрын
@Victor Bode instablaster ;)
@victorbode5400 3 жыл бұрын
@Robert Rudy thanks so much for your reply. I found the site thru google and I'm trying it out now. Seems to take quite some time so I will reply here later with my results.
@dutdutna5103 Жыл бұрын
This is the table that I dreamed of. simply beautiful just like apple store table.
@TheOffcut Жыл бұрын
Thank you!
@michaeltretina 4 ай бұрын
Looks great! The finish came out looking amazing. I looked it up, the finish is for hardwood flooring. I didn't think of that, great idea. Good job.
@thomasschafer7268 7 ай бұрын
Ein schöner Tisch. Zeitlos und schlicht!. Ohne diesen neuen epox Hype.👍👍🇩🇪
@EliasMakes 3 жыл бұрын
that drill press table looks awesome
@youtukang 3 жыл бұрын
🙏🤝🤝🤝🇮🇩
@f1rstclass289 3 жыл бұрын
I love this, very classy and minimalist.
@DynamicDaveJonker 3 жыл бұрын
Looks amazing!
@youtukang 3 жыл бұрын
👍👍
@relaxivegotthis 3 жыл бұрын
You sir are an excellent craftsman.
@jackknows6509 2 жыл бұрын
Simple elegance. Perfect.
@TheOffcut 2 жыл бұрын
Thank you! 😊
@runyik 3 жыл бұрын
beautiful piece of work
@davidparseth 3 жыл бұрын
Nice one Tim, always partial to oak furniture 🔥
@Antweak83 3 жыл бұрын
The old level on the table saw trick! Nice work considering how limited you were with tools
@TheOffcut 3 жыл бұрын
Cheers! Gotta be creative when you don't have all the proper tools
@stevesteves8915 3 жыл бұрын
Very interesting construction of the base - whole thing looks really good!
@TheOffcut 3 жыл бұрын
Thank you very much!
@AceWoodCo 3 жыл бұрын
I’m a big fan of OSMO! Use it all the time. A very clean table! Great build👌
@TheOffcut 3 жыл бұрын
Thanks! 👍
@mowcius 2 жыл бұрын
And the non-abrasive pad application too! I've yet to find a good supplier of the pad here in the UK, but I'll persevere!
@joepme20 3 жыл бұрын
Looks great! I see only one big problem.. The core of your boards should be alternating up and down. The board cores of the tabletop are almost all facing down, which will result in a majorly cupped top over time.. Maybe something to take into consideration next time! Besides that, great work!
@TheOffcut 3 жыл бұрын
Thanks! For some reason I didn't think of that at the time. I think I was more concerned about the sides that looked best for the top. Which unfortunately made them all the same grain direction. It had moved slightly before putting the top on but screwing it to the legs pulled it back down without too much pressure. Only time will tell
@VlauableFather 7 ай бұрын
Several people have tested this and found there was no difference.
@NearbyCactus 3 жыл бұрын
Beautiful - I really like the design, and execution was perfect!
@TheOffcut 3 жыл бұрын
Thanks Tim!
@johndelarosa3197 11 ай бұрын
Hello Brother, I found it interesting that you put the short 45 degree braces on the outside of the corners of the table rather than on the inside. Nice 🙏
@charlesschuster7963 5 ай бұрын
I did a similar table using reclaimed mahogany and learned a couple things the hard way. One, you have to orient each tabletop board so you can plane the surface (1:38) in one direction. If not, the plane will gouge the surface... fill with epoxy later, but it's unsightly. The growth rings on your top boards (some up, some down) suggest they may cup later. That's a small fortune in tools. Facing the boards on a table saw is more properly done on a jointer. You should emphasize that any epoxy has to be absolutely well mixed. The blowtorch on the epoxy is to pop the bubbles that will rise up to the surface, but it's unnecessary if you're going to sand it later. Blind tenons on the legs would have left the completed table a little more attractive. Everyone's a critic... you did a nice job.
@robshamel3210 3 жыл бұрын
Nice lines and attention to detail. Thanks for sharing..
@TheOffcut 3 жыл бұрын
Thank you too!
@jondoe79 2 жыл бұрын
Absolutely beautiful
@edwardflores8092 2 жыл бұрын
Super like!!!! I want to build this one myself. Thanks for sharing.
@alastairleung1883 3 жыл бұрын
Just realized you upgraded table saws. Nice dewalt. You did A LOT with that Ryobi.
@TheOffcut 3 жыл бұрын
Hahaha thanks. Yeah, I wore out the gears in the blade height mechanism haha. So I couldn’t move the blade... Hoping the dewalt will last a lot longer!
@jp_makes 3 жыл бұрын
That's a beautiful dining table.
@TheOffcut 3 жыл бұрын
Thank you!
@marceltartan4747 2 жыл бұрын
Amazing . So clean and beautiful table.I like it.
@NapKingCole84 11 ай бұрын
I'm late to the party, but nice work! I love red and white oak!
@chenzhao1071 Жыл бұрын
Wanted a simple yet elegant table like this but couldn't find any place that sells anything similar :( don't have the tools to make one either lol, biggest fear is messing up the table top and can't make it flat... Maybe one day!
@craigmoore1435 3 жыл бұрын
Looks great. Good detail. Clever trick covering the other side of your small pull saw with tape. I recently bought white oak from ititimspec - they organised for it to be D4S and jointed and shipped it to me in Wellington. A bit of a risk with humidity changes etc for a table I made but it seemed to cope well.
@TheOffcut 3 жыл бұрын
oh nice. Timspec was going to be my next option. Not sure who is cheaper out of all the timber suppliers.
@craigmoore1435 3 жыл бұрын
@@TheOffcut Oh damn, that was going to be my next question. I paid $5,350 excl GST per m3. I needed just over 0.2 m3 for a table a little smaller than yours.
@i1l11 3 жыл бұрын
Great work and table!
@tool79 3 жыл бұрын
Simple and elegant!
@TheOffcut 3 жыл бұрын
Thank you!
@williamwhite4998 Жыл бұрын
Wonderful job
@arth.4196 3 жыл бұрын
Excellent Craftsmanship
@philipjones9297 3 жыл бұрын
A thing of beauty 👍
@garagemonkeysan 3 жыл бұрын
Great video. Table is beautiful. Well designed and fabricated. Mahalo for sharing! : )
@TheOffcut 3 жыл бұрын
Thanks very much!
@lewisbrown51 3 жыл бұрын
Amazing work 👏
@TheOffcut 3 жыл бұрын
Much appreciated
@germineiro Жыл бұрын
Saludos desde México viejo ¡Excelente trabajo y buenos tips!
@steitos Жыл бұрын
*Hi, good job 🤗🤗🤗*
@bibididone 3 жыл бұрын
I'm loving this table! I saw that you're going to publish the plans soon. Do you have a date?
@TheOffcut 3 жыл бұрын
Thanks! Hoping to get them finished in a week or so!
@bibididone 3 жыл бұрын
@@TheOffcut thank you!
@bibididone 3 жыл бұрын
@@TheOffcut upload the plans, please!
@vecabiomedica7676 3 жыл бұрын
Very nice, good job
@gallarza76 3 жыл бұрын
Amazing Job Congrats 👊😎
@jucariecubaterie 3 жыл бұрын
Ottimo lavoro! Complimenti!!
@jimm8465 Ай бұрын
Beautiful table. Like the red oak. How come you did not flip the one board that had the knot ?
@markmarcus353 2 жыл бұрын
Great looking table. I would love some plans for this if you have them available. Couldn’t find any on your site.
@ronin2963 2 жыл бұрын
Very novel approach to the legs.
@drumandball 3 жыл бұрын
Very nice. I bet that thing weighs a TON!
@osm3slsd 3 жыл бұрын
OSMO OIL !
@bartbug1 3 жыл бұрын
Nice work, impressive. New subscriber. Keep up the great work, thanks for the vids.
@7MrElement 3 жыл бұрын
Are you borrowing the Deros? Also, Osmo Polyx is great on white oak. Use it for all my oak furniture.
@jtotheb-ip2hh 3 жыл бұрын
simple and beautiful. i love it. is that white oak? great work, and greetings from Southern California!
@fatboyblah33 3 жыл бұрын
Nice table bro! love how you did the legs. Where did you get the figure-eight connectors from?
@isrightkev 3 жыл бұрын
That table looks amazing! Only wondering why you didn’t biscuit joint the table top?
@TheOffcut 3 жыл бұрын
Thanks! I didn't feel like it was necessary. The boards were very flat and square so the glue up was pretty straight forward.
@Looyenss 3 жыл бұрын
biscuits, lol.
@yuzhang720 3 жыл бұрын
several years later you will regret not having used biscuit or domino, but the table is stable enough I think,good job!
@youtukang 3 жыл бұрын
😊😊😊👍
@youtukang 3 жыл бұрын
@@Looyenss hyyy 👍👍
@zbyleq 3 жыл бұрын
My friend, did it bend ? i see serious problem in that table build at 11:24 other than that, good job and nice tools
@TheOffcut 3 жыл бұрын
There is no bend after 6 months. The top has expanded slightly but the frame is keeping it nice and flat
@TakamiWoodshop 3 жыл бұрын
Dude that turned out great! You must be super happy. Was wondering what finish you used when I saw it on insta - it OsmoX Hard wax [sic?] right?
@TheOffcut 3 жыл бұрын
Thanks Rob! Very happy with it. A lot of firsts for me, like filling the holes with epoxy. Luckily it turned out good. Not perfect. But good :D. yea its Osmo hard wax oil with a matt finish.
@ddj-5525 3 жыл бұрын
Cool! Очень красиво и грамотно выполнено! Хочу себе такой стол :-(
@vegasius1265 3 жыл бұрын
Beautifull 👍👍
@alekasandarmilosavljevic6767 3 жыл бұрын
this will bend.
@johnmanfra4224 4 ай бұрын
Beautiful table what grit did you use for the sandpaper on the top for finish and also what product did you use for finish?
@CaveFreediving Жыл бұрын
What about the wood movement of the top? Seems like it would crack easily.
@SamWanamaker1 4 ай бұрын
I see the figure 8 fastener mistake all the time. Obviously way too late, but you can’t put those on the sides. It will lock it in place and do the exact opposite of what you’re looking for. Just a heads up.
@KuasarG7 6 ай бұрын
No sabía que a Cristigo92 le molara el bricolaje
@namoothewoodprojects 3 жыл бұрын
Great job bro, simple but beautiful design. Also what kind of hand plane block is that? Does anybody know? 🤔
@TheOffcut 3 жыл бұрын
Thank you! Its just a standard Stanley number 5 plane
@parisgk 3 жыл бұрын
Very nice!
@youtukang 3 жыл бұрын
😊😊😊
@charlesapettit 10 ай бұрын
Great table, any chance of getting your plans for this build? Thanks.
@fatmaunalan6949 2 жыл бұрын
Great! I wonder what you are using for polish.
@bobk7132 2 ай бұрын
Beautiful Table...what color of the Osmo wax did you use?
@ArturoMendezC 3 жыл бұрын
Me gusta mucho la mesa 🔥
@ZaneBezesky 29 күн бұрын
Beautiful. Are your table legs 1.5” or 2”? They look perfect. Curious as to the dimensions for my own table.
@TheOffcut 10 күн бұрын
Thanks! They are actually 2.5" thick
@chronicmango 3 жыл бұрын
Quick question - for the leg assemblies, why did you glue the two pieces along their faces with the half laps in them, so that that internal pressure from the inserted apron side would push outward on the glue joint? If you glued the leg assembly before cutting out the mortise, then rotated the leg assembly 90°, you’d have the internal pressure from the tenon pressing outward on the actual grain of the wood rather than the glue joint, but would still get the same exposed joint look. Is there a reason you cut out the mortises (as half laps) before glueing up the legs? Ease of use? I know it’s easier to run them over the table saw rather than hack out with a chisel lol. Just curious if there was another reason you made that call that I’m not thinking about. Beautiful build and I appreciate your touches.
@TheOffcut 3 жыл бұрын
Thanks! It was purely because it was easier to cut and assemble that way. I'm not too worried about the joint pushing outwards on the glued face.
@foxyredsheri Жыл бұрын
This was perfect as a vanity desk for me. kzfaq.infoUgkxMAlHv7-BBWMrPRm5-uEoD6rtdT7SG2Qr Especially the glossy finish. Easy to cleanI was looking for something that wasn't the traditional white and with more of a modern feel. This fit the bill beautifully. I put it together with no problems, by myself in under an hour.Make sure you double check where you place the drawer tracks before screwing down. I had one track that needed to be aligned with different holes than the rest.
@mynameis123456ish Жыл бұрын
Looks great! Where in NZ do you buy your timber? Did it come dressed?
@brianhill9546 2 жыл бұрын
Wow
@user-gm8ui3xt4m 3 жыл бұрын
*Какая красота. Привет от канала ПРОСТЫЕ ВЕЩИ*
@youtukang 3 жыл бұрын
👍🤝🤝🤝🇮🇩🙏
@user-gm8ui3xt4m 3 жыл бұрын
@@youtukang Спасибо друг.
@youtukang 3 жыл бұрын
@@user-gm8ui3xt4m ☺☺🙏🤝🤝🤝🇮🇩
@vojo6625 3 жыл бұрын
Awesome job! New subs here!
@yossiyaari3760 3 жыл бұрын
WOW
@leodarwinorjalo7216 2 жыл бұрын
Great job! Btw where do you buy your wood? And what do you call those 8 shape metal to connect the table top into the base? Thanks
@AW-pz3qc 3 жыл бұрын
Beautiful table, just perfect. Hey, the courier hasn't delivered mine yet...hahaha! Has it been lost in the mail? ;-)))
@TheOffcut 3 жыл бұрын
Haha. I wouldn't trust a courier to deliver furniture :P
@sergeymun8588 3 жыл бұрын
Hi mate. Great table !!! I have a question. What do you use to rip plywood on and where did you get it from? Cheers
@TexasLarson 6 ай бұрын
Is this white oak? I noticed you do not have plans for this table on your website. Do you have any for purchase?
@blueace115 3 жыл бұрын
what about wood movement for the top?
@TheOffcut 3 жыл бұрын
The figure 8 washers allow for movement as they can rotate around the screw. they are not screwed in tightly. Just enough to keep the top down
@pfrances09 Жыл бұрын
Is there a step by step tutorial for this? Or a plan in your gumroad?
@davidonwp 7 ай бұрын
I broke my eyes
@danielcalacal4497 2 жыл бұрын
Complete tools
@SkylaneGuy 3 жыл бұрын
I like the figure 8 clips for attaching the top. I’ve used those too. One question: what do you have against using a dado blade for making the tenons? Seems like it would save you a lot of work.
@TheOffcut 3 жыл бұрын
I don't have anything against dado blades. I wish I had dado blades. I haven't been able to find them in New Zealand and I'm not sure if my table saw arbor will fit them
@7MrElement 3 жыл бұрын
@@TheOffcut they don't fit on a Dw745. Carbatec sell dado blades too.
@mowcius 2 жыл бұрын
Most saws outside of the US don't have arbors long enough to take them as they're considered to be a non-essential device with a significant reduction in safety (no riving knife, no blade guard), so various regulations forbid them.
@philkism 3 жыл бұрын
Nice table! Is this white oak finished with Osmo poly x? Looks great!
@TheOffcut 3 жыл бұрын
Yes, it is! Thanks!
@Pjai1984 3 жыл бұрын
Awesome table! can you also list where you get your timber from in NZ? cheers bro
@TheOffcut 3 жыл бұрын
Cheers man. Timber is from BBS Timber in Auckland
@ChristopherClaudioSkierka 3 жыл бұрын
Hi what type of plane did you use?
@TheOffcut 3 жыл бұрын
Stanley number 5 plane
@ChristopherClaudioSkierka 3 жыл бұрын
@@TheOffcut thank you!!!
@cdf719990 6 ай бұрын
Little open at the ends?
@MohamedAhmed-uj5bm 3 жыл бұрын
👍
@Layput Жыл бұрын
So you don't really need to use biscuit or domino joiner to join planks?
@TheOffcut Жыл бұрын
Nope
@georgemathew1155 3 жыл бұрын
Wonderful. What kind of finish you used? Is it polyurethane?
@TheOffcut 3 жыл бұрын
Its Osmo polyx hard wax oil
@johnmanfra4224 4 ай бұрын
What type of tape are you using and can you link your epoxy set up
@nszecket 2 жыл бұрын
Nice work. Can I ask which sanding nets you use and where you buy them?
@TheOffcut 2 жыл бұрын
They are the Mirka Abranet sanding discs
@hewittgordon8843 3 жыл бұрын
Nice job. What finish did you go with ???
@Stephanie.vu_ 3 жыл бұрын
Can you link the hard wax you used? Trying to refinish my oak dining room table
@raymondcheng9977 3 жыл бұрын
how many hours would this take for a beginner to make?
@canaltvgame9972 4 ай бұрын
Quais medias usou nas pernas da mesa, vou fazr uma igual pra por meu pc
@samstewart-anderson7814 3 жыл бұрын
why use tablesaw and jig instead of straight router bit for rebate? cheers
@TheOffcut 3 жыл бұрын
I could have used the router to do it. I just thought it was easier to do it on the table saw and not get as messy with all the sawdust. A router table would have been best but I don't have one yet.
@samstewart-anderson7814 3 жыл бұрын
@@TheOffcut i see. epic table man great workman ship
Bourbon Moth Woodworking
Рет қаралды 355 М.