HONDA CBR600RR 2003-- BRAKE FLUID CHANGE [REAR Caliper] Step BY Step. DIY Motorcycle Maintenance.

No video

HONDA CBR600RR 2003-- BRAKE FLUID CHANGE [REAR Caliper] Step BY Step. DIY Motorcycle Maintenance.

Рет қаралды 6,073

Күн бұрын

Brake fluid change REAR CALIPER on a HONDA CBR600RR 2003-- made easy by: The Old Mechanic.
BE sure to watch this WHOLE video, so you don't miss important information.
With this DO IT YOURSELF video you can save yourself a lot of money.
DIY Motorcycle maintenance made easy By: The Old Mechanic.
THANKS For WATCHING!
Don't forget to SUBSCRIBE LIKE and SHARE this video with your all your friends on FaceBook.

Пікірлер: 11

@essequamvideri 3 жыл бұрын

as with most bike maintenance... removing the plastics takes the most time. quality work here. 👌

@TheOldMechanic 3 жыл бұрын

Hi, yes your absolute right.. and to be honest thats not my favorite part, I allways call it 'Tupperware'..lollll. Greetz from The Old Mechanic 👨‍🔧

@br1meduri19 3 жыл бұрын

Grazie per i video Boss! 😉 e grazie soprattutto per le traduzioni in italiano che sono essenziali, senza la traduzione non ci capirei… un tubo 🤣🤣🤣👋🏻👋🏻

@TheOldMechanic 3 жыл бұрын

Ciao grazie per le tue belle parole, spero che i miei video possano aiutarti a fare la manutenzione del tuo motore da solo. Saluti da: Il Vecchio Meccanico e guida con prudenza. (Google Traduttore)

@mansuransar5534 3 жыл бұрын

Hey Mr. Old Mechanic thank you nice one - have a great day kind Sir

@TheOldMechanic 3 жыл бұрын

Thanks, you too!

@ticocastro5256 3 жыл бұрын

I’ve only ridden my bike for a season and I looked today and that little tank was empty!! Is that why my rear brakes feel weak? Or do I need new brakes?

@TheOldMechanic 3 жыл бұрын

Hi TicoCastro, First thing you need to do is to check your rear brake pads, if they been worn out, renew them. Then change the brake fluid, for fresh brake fluid. Look for airbubbles, as that will explain that spongy feeling. You also look for any leaks in the brake system. Let is know what you discovered. Greetz from The Old Mechanic, ride save 👨‍🔧--->🏍 👍 Don't forget to subribe to my channel.

@krismuller2209 3 жыл бұрын

Hi, thanks for the videos! It's hard to find information like this specific to my bike. I have a question, I am going to buy a hydraulic brake switch for the rear brake as i am making my bike road worthy and i dont have a spot for a normal brake switch (racing foot pegs). Is the thread size 1mm or 1.25mm? (I'm assuming it goes in the top, replacing the bolt that holds the banjo bolt) I cant seem to find an answer anywhere. Thanks, Kris

@krismuller2209 3 жыл бұрын

I just found a part number for the original bolt: 90145-MS9-612. But it doesn't tell me the pitch of the thread.

@TheOldMechanic 3 жыл бұрын

@@krismuller2209 Hi Kris, I am sorry but I can't help you with this question. Perhaps someone here can help you out ?