BMW MotoScan How to do a ABS MODULATOR FLUSH / CHECK AND a REAR brake fluid change. BMW S1000R

No video

BMW MotoScan How to do a ABS MODULATOR FLUSH / CHECK AND a REAR brake fluid change. BMW S1000R

Рет қаралды 14,793

Күн бұрын

Did you ever think about doing YOUR OWN MAINTENANCE on your BMW S1000R..? This video is how to perform an ABS modulator flush /check
after you changed your REAR brake fluid. I advice to do that with each brake fluid change so your ABS modulator get activated atleast ones a year.
HERE YOU CAN ORDER THE (NEW UPDATED) SCANNER THE UniCarScan UCSI-2100:
amzn.to/3EUeUBe
OR MX+ OBD2 Bluetooth Scanner: amzn.to/3GbxFB3
AND OFCOURSE THE SPECIAL CABLE: amzn.to/3VMLtrM
HERE the MOTOSCAN APP: play.google.co...
More of my maintenance video's of this BMW S1000R 2016 you find here:
• BMW S1000R S1000RR [20...
Please Have a look at: THE OLD MECHANIC FAN-WEAR ? CLICK HERE
my-store-cb705...
If you want to support my channel, so I can make more of these maintenance video's for you,
please push the --- ♥️ THANKS -- button below..
Motorcycle Maintenance For Beginners - AND What You Need To Know
With this DO IT YOURSELF video you can save a lot of money.
So be sure to watch this WHOLE video, so you don't mis important information.
Don't forget to SUBSCRIBE, LIKE and SHARE this video with your all your friends on FaceBook and WhatsApp.
Motorcycle maintenance made easy by: The Old Mechanic
#TheOldMechanic #motorcyclemaintenance #bmws1000R
Motorcycle maintenance made easy by: The Old Mechanic

Пікірлер: 29

@ricardomiller1519 Жыл бұрын

Recently got an S1000R (2015) and been binge watching your videos. You give very clear instructions. Your videos are fulfilling to watch, and I especially love the accent, the way you ensure the silent "g" is not left out in "diaphragm" (diaFRAM) ... love it. I'm off to watching the next video.

@TheOldMechanic 11 ай бұрын

Thanks Ricardo 👍🏻👊🏻😉

@LeeBerry-wr3vs 7 ай бұрын

I have a BMW K1300S with ABS and was told to only use BMW Low Velocity brake fluid so by watching your videos I am learning a lot of information Thank you 👍

@TheOldMechanic 7 ай бұрын

Great to hear!

@benlynch3783 3 ай бұрын

What the hell is low velocity brake fluid???

@kovrcek Жыл бұрын

Perfect! Was looking exactly for a video how to bleed the brakes with Motoscan on my Dakar. Wasn't quite sure if something has to be done to the module etc. This explains it nicely. Thank you!

@TheOldMechanic Жыл бұрын

Great to hear! 👍🏻👊🏻😉

@OneTakeSunday 28 күн бұрын

I notice you don't use speed bleeder screws in your brake videos. Is there a reason you don't use or don't like them? Thank you for your videos. They have saved me thousands of dollars by learning from you and doing the work myself!

@tomekichiyamamoto2177 5 ай бұрын

Great camera technique. Yes, camera technique is good 👍

@TheOldMechanic 5 ай бұрын

Thank you 👍🏻

@lukeiamyourfather3511 Жыл бұрын

I also use a bit of twisted up paper towel . To remove the left over brake fluid left in the brake bled screw. Thought I was the only one.

@TheOldMechanic Жыл бұрын

👍🏻👊🏻😉

@randyburgos Жыл бұрын

Love it Old Mac. Randy.

@LeeBerry-wr3vs 7 ай бұрын

Great information, could I ask what OBD your using to connect to motoscan and is it compatible with all BMW BIKes, I have a BMW K1300S 2016 TIA

@TheOldMechanic 7 ай бұрын

Have a look at my Motoscan app playlist 👍🏻👊🏻😉

@LeeBerry-wr3vs 7 ай бұрын

Thank you

@Brian-ie2un 8 ай бұрын

Brilliant.

@stangn99m52 3 ай бұрын

Hello, Is it possible to bleed ABS brakes with MotoScan and OBDLink LX? I have the LX but wondering if MX+ is necessary? Thanks so much for your videos.

@sergioantoniods 9 ай бұрын

Good morning, In the manual it is DOT 4 brake fluid. I put DOT 5.1 Bom Dia, No manual é o Fluido para os freios DOT 4. Eu coloquei o DOT 5.1.

@openscape7831 Жыл бұрын

Hi Thank you for your videos, great learning experience. I have 2005 BMW K1200S. ABS Check. When i check in MotoScan Ultimate version , go to the ABS, i do not see Service Functions tab, only see Identification, Read Trouble codes and clear trouble codes. Dose this mean i do not have ABS? With the ignition on (engine off), i press the front break, i hear noise pressing down on calliper. How can i confirm i have ABS? Thank you.

@LeeBerry-wr3vs 3 ай бұрын

On the motoscan app how do you find out what the fault codes mean, thank you in advance I have fault code 2741

@TheOldMechanic 3 ай бұрын

You have to google on that 😉

@alessandrobettaglio3225 Жыл бұрын

Dear Sir, have you any idea about which combination of software and obd adaptor for ABS bleeding on 2011 Triumph Tiger 1050 ?? I have KKL USB cable that works pretty fine with TuneEcu (but no ABS bleeding function in the software unfortunately) and another OBD bluetooth adaptor but I haven't find any compatible software (tried also guzzidiag, tigertool). Do you have any suggestion / experience with this bike ?

@TheOldMechanic Жыл бұрын

Hi Allesandra, I have a playlist of the Triumph Tiger, you will find your answer there 😉👍🏻👊🏻

@chichogsxr 5 ай бұрын

Hola esa aplicación cual es? Y donde puedo hacerme del conector y la aplicación para ios

@NoNegotiations Жыл бұрын

Would know what could be wrong. I old Rotors and Pads, NEW rotors and pads, but I'm still getting stuttering when braking, only when braking. What could be wrong? only fronts are doing this.

@rubsousa Жыл бұрын

Dear Sir., first of all congratulation for the excellent video! I have a BMW R1200GS Adventure year 2012, could you please let me know if you have on the YouTuvbe a video with this procedure for my motorcycle? Otherwise is the S1000R procedures is applicable for R1200GS Adventure year 2012?