How to Install a Towel Bar in Drywall - Strong Towel Rack Installation

Рет қаралды 527,633

7 жыл бұрын

How to Install a Towel Bar in Drywall - Strong Towel Rack Installation
If you’re a home owner, you will need to install a towel bar at one time or another. And in this video, I’ll show you how to install towel bars on drywall. I use painters tape to mark the wall where I’m going to drill. Tools needed are a drill, drill bits, tape measure, stud finder and a level.
Installing a towel rack or towel bar really isn’t a difficult task and can probably be done in about 30 minutes. If you can do this, you’ll be able to hang towel rings too! I hope you found this video helpful and if you did please give me a thumbs up and don’t forget to subscribe to my channel for more how-to videos and product reviews.
Disclaimer: As an Amazon Associate I earn from qualifying purchases.
***Equipment I Use For My Videos***
Canon EOS M6: go.magik.ly/ml/his4/
Canon EF-M 22mm f/2 Lens: go.magik.ly/ml/his5/
Tokina 11-16mm Wide Angle Lens: go.magik.ly/ml/hhn5/
Fotodiox EF to EOS M Lens Adapter: go.magik.ly/ml/his9/
Comica CVM-WM300A Wireless Microphones: go.magik.ly/ml/hisf/
Aputure Amaran AL528W LED Light: go.magik.ly/ml/hisj/
Kamerar SD-1 Camera Slider: go.magik.ly/ml/hisp/
Manfrotto Aluminum Tripod: go.magik.ly/ml/hisw/
AVermedia Game Capture Module: go.magik.ly/ml/hitj/
***For business inquires only feel free to contact me here***
Email: harlany@therenderq.com
Twitter: @harlanyee

Пікірлер: 195

@brock2k1 7 жыл бұрын

Great video, especially liked that you had one end on a stud and the other on plain drywall, so we saw both types.

@TheRenderQ 7 жыл бұрын

Great! I'm really glad you pointed out the stud vs drywall anchor install methods. I didn't even think about that when I was shooting the video. It was just what I had to do to make it work! Ha ha!

@pathumdesilva9948 3 жыл бұрын

@@TheRenderQ Iiiiiiiii

@milyemmilyn1155 2 жыл бұрын

We sell this tower holder on Amazon.Do you want a free sample.pls contact me 😌

@jmusic45 Жыл бұрын

@@TheRenderQ I needed this. These 24 inch bars I got for the bathroom had the same problem. The left had a stud in the wall, the right side does not, and I saw my mistake in using the plain anchor in the right and it’s loose, but the left is tight, but the right is not. Now I got this hole. I’m putting this in my Pinterest.

@krishcan4727 Жыл бұрын

I thought it's prefered to install the on either side of studs. Instead of right on them

@delightmedia1556 4 жыл бұрын

Thank you soooooo much for this. I moved into a new house and the towel hanger fell off. I tried to force it on, but after watching the video, I realised what exactly to do... Bro, youtube can teach you anything these days

@manumoudgil9607 2 жыл бұрын

Thank you so much for your help. It has been broken for quite a while. That little screw under there got me. Very clear and probably very fewest of the videos who accurately describe and answers to the point.

@squiddy577 3 жыл бұрын

Thank you! Mine has been falling off regularly for years and this time I just couldn't get it to stay on the wall. Never knew the little prongs were on screws! DONE!

@TheRenderQ 3 жыл бұрын

Excellent! I’ve had my fair share of loose towel bars. Those wall anchors really help when the screw hole no longer holds the screws in! Glad you’ve got a secure towel bar now!

@cam919 4 жыл бұрын

Thank you Bros The install look so easy and perfect . I’m gonna try to install the towels bar today.

@tabithafranklin8750 Ай бұрын

Great video! I needed the refresher!!!

@rrinternet Жыл бұрын

Excellent video. You stayed on track and it was very clear and simple and helpful. I can do that!

@benjaminnemeth265 6 ай бұрын

Great video, thanks for making such useful and straightforward content! My six year old ripped the towel bar off the wall so I'm working on getting it back on, but at a height that is better for him and his brother.

@alises.5986 5 жыл бұрын

I very much appreciate the excellent audio quality of your video!

@TheRenderQ 5 жыл бұрын

Nice! I'm really glad you appreciate the details I put into my videos. I want my viewers to be able to see and hear what I'm trying to show clearly. Thanks for watching!

@androot5220 3 жыл бұрын

Thanks man, my towel hanger fell off and I didn't know where to start. This vid def. helped!

@TheRenderQ 3 жыл бұрын

Excellent! I’m glad my video helped you get your towel bar reattached! Thanks for watching!

@carolmontalto622 3 жыл бұрын

Thank you for detailing and explaining. I have been trying to learn how to do little things around my house. This is the best video. Please do more easy household tasks. Carol Montalto

@ClaytonDerby 4 жыл бұрын

Just installed my first towel bar with the help of this video. Thanks 😊 💯

@TheRenderQ 4 жыл бұрын

You’re welcome! Excellent work! I’m really glad my video helped with your towel bar installation! Thanks for watching!

@hiteshshahaniful 4 жыл бұрын

Thanks, got stuck at a place and the video sorted it👍👍well made and explained.

@daphnetan7970 3 жыл бұрын

Great video! Learnt fr yr video how to reinstall my bar towel after it came off. Didnt realise there is a screw at side of the round knob till i watched yr video. In less than 10.min, ta‐da ! Done! Thank you!

@stevemayberry5841 Жыл бұрын

very clear to see what you are doing and verbal instructions are perfect. thank you for doing the work to help me. Your step by step was perfect.

@kouguy8213 Жыл бұрын

A method that actually works! Love it!!

@Cashstuffwithsteph 3 жыл бұрын

My son just pulled the towel bar In his bathroom. This video was very helpful

@TheRenderQ 3 жыл бұрын

I’m really glad my towel bar video was helpful! Thanks for watching!

@Rissa-Eshopifiz 6 жыл бұрын

Thank you for posting this helped me fix mine

@ActionBastard88 4 жыл бұрын

Super simple and easily explained, definitely subbed.

@TheRenderQ 4 жыл бұрын

Hey I'm glad my towel bar installation video was easy to follow along with. Thanks for watching and subscribing! I really appreciate it!

@susangilbertson2305 5 жыл бұрын

Such a helpful video!

@Potsnu 5 жыл бұрын

Great video, very detailed. Thank you for making this

@TheRenderQ 5 жыл бұрын

Thanks for watching! I'm really glad you enjoyed the tutorial!

@washirw Жыл бұрын

Very helpful. Thank you

@toddgrooms7004 2 жыл бұрын

Thanks for your help

@jenniferr3082 4 жыл бұрын

Very helpful. Thanks.

@crisdutton613 2 жыл бұрын

Perfect! Thank you!

@ricardoferreira7671 3 жыл бұрын

Excellent video and explanation. Thanks to share your knowledge and time.

@TheRenderQ 3 жыл бұрын

You’re welcome! I’m really glad that my towel bar installation video was helpful!

@MasteringMinutes 8 ай бұрын

Thanks a lot. Clear explanation ❤

@SridharPatchigolla 2 жыл бұрын

Thank you, really helpful

@JohnnyGuitaristOfficial 4 жыл бұрын

Awesome, now im ready to install one 😊

@BatsnGhosts 3 жыл бұрын

Very informative thank you! Trying to renovate my bathroom by myself 😂😭

@afancynotion4736 6 жыл бұрын

excellent video! thanks for the clear instructions

@TheRenderQ 6 жыл бұрын

I really appreciate your comment! I'm really glad you found the video instructions to be easy to follow! Thanks for watching!

@imoan4nyc312 5 жыл бұрын

Awesome video, easy does it!!! I will install my rack as I watch your video…… lol Thanks so much

@TheRenderQ 5 жыл бұрын

Excellent! I'm really glad you can use my video for step by step instructions as you do your install! Thanks for watching!

@bertadelaudebri7179 4 жыл бұрын

Thanks, for simple easy steps!

@TheRenderQ 4 жыл бұрын

You’re welcome! I’m really glad that you enjoyed my towel bar installation video! Thanks for watching!

@miamitreasurehunter 4 жыл бұрын

Nicely Presented !

@TheRenderQ 4 жыл бұрын

Thanks! I’m really glad that you enjoyed my towel bar installation video! Thanks for watching!

@annaospina2865 3 жыл бұрын

Excellent video!!! Thank you!!

@TheRenderQ 3 жыл бұрын

You’re welcome! I’m really glad that my towel bar installation video was helpful! Thanks for watching!

@alvinwilson1378 6 жыл бұрын

Great Video, very helpful...Thanks

@TheRenderQ 6 жыл бұрын

I'm really glad to hear that you found the video helpful! I often pick up my camera and make a video while I'm making my home repairs but it takes me 3 times as long to finish the project! Ha ha!

@tisaac2142 3 жыл бұрын

Very helpful. Thank you.

@TheRenderQ 3 жыл бұрын

You’re welcome! I’m really glad that you enjoyed my towel bar installation video! Thanks for watching!

@hollylightfoot7002 6 ай бұрын

Thank you so much.

@BeyondthC 5 жыл бұрын

Glad I watched this. Measuring up from the floor is definitely a good idea and will save me having to get help installing this. Great video, thanks!

@TheRenderQ 5 жыл бұрын

You're welcome! I'm glad you got some useful information from my video!

@rosemarywilliams9969 5 жыл бұрын

😍Such a useful well made video. thank you so much, I'm going to do this over the weekend myself! so sick of waiting for guys to help me. 😅master bath here l come!

@greentrees3941 5 жыл бұрын

Rosemary Williams lol

@informationbd1996 5 жыл бұрын

Rosemary Williams hi

@rosemarywilliams9969 5 жыл бұрын

:) hello

@ArcticGamer0 5 жыл бұрын

I hear your pain. lol

@tae-ohkim1934 5 жыл бұрын

Thank you! I got a good idea when I fixed mine!

@TheRenderQ 5 жыл бұрын

Nice! Glad the video helped spark an idea to help you get yours fixed!

@greentrees3941 5 жыл бұрын

Thank you for the video.

@TheRenderQ 5 жыл бұрын

You're welcome! I'm really glad you found the video helpful!

@shazzamjones 3 жыл бұрын

perfect, thanks so much

@user-cb9iy4mn3z Жыл бұрын

This little kzfaq.infoUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.

@TheRenderQ Жыл бұрын

Excellent! Glad my towel bar video was helpful!

@ScrewballMcAdams 2 жыл бұрын

Good video, thanks!

@TheRenderQ 2 жыл бұрын

You’re welcome! I’m glad my towel bar tutorial was helpful! Thanks for watching!

@Mikieperson 2 жыл бұрын

This is def going to help me install mine. The measuring from the floor seems like a good idea, as I’m not sure that the window and stuff around are level… who ever build or did a previous remodel on this place before me did some shotty work, that I’m slowly repairing as money allows.

@TheRenderQ 2 жыл бұрын

Excellent! Really glad my towel bar installation video was helpful! Thanks for watching!

@Ben10ontren 5 жыл бұрын

Great video

@TheRenderQ 5 жыл бұрын

Thanks! I'm glad you enjoyed the video!

@nagpurtime 4 жыл бұрын

Good video.

@HBFREEWORLD 4 жыл бұрын

Excellent !

@TheRenderQ 4 жыл бұрын

Hey! Really glad that you enjoyed my towel bar installation tutorial! Thanks for watching!

@bluesdawg8014 3 жыл бұрын

Good video

@MZNENE_BLESSED 2 ай бұрын

THANK YOU💯💯💯🙏🏼

@augdon 4 жыл бұрын

Very helpful

@TheRenderQ 4 жыл бұрын

Excellent! I'm really glad you enjoyed my towel bar installation tutorial!

@epiccreations1214 4 жыл бұрын

clean and easy...

@rogergarcia306 3 жыл бұрын

Thank you that was great :)

@TheRenderQ 3 жыл бұрын

You’re welcome! I’m glad my towel bar installation video was helpful! Thanks for watching!

@rohhardin3817 2 жыл бұрын

My towel bar is different, 3 pieces not including mounts. Harder to get level. This video helped me though. Thanks.

@davidsonnow 3 жыл бұрын

Do you need to pre-drill the hole going into the stud? Or can you just put the screw into the stud

@kirstenbeyoncepadthai 4 жыл бұрын

Thank you!!!😘

@khatabomar5141 9 ай бұрын

Thanks

@Lynn0219 8 ай бұрын

I'm currently looking for a new towel bar but the old bracket was installed side by side but I can't find any good ones like the bell shape that are the same. Am I looking in the wrong places?

@cynicalcomic4348 2 жыл бұрын

How do you know what size drill bit to use

@Shmancy_pants_69 4 жыл бұрын

This is got an asmr vibe going on

@archu4386 Жыл бұрын

Thanks.

@ryu2cool 4 жыл бұрын

My towel bar is loose, i'm having trouble unscrewing the little screw with the allen key, it just spins and doesn't seem to be coming out. Any tips?

@stoneflowerinthekitchen3445 10 ай бұрын

I installalled a 3 towel rack as in the video. After a coupld of weeks, the rack started to come out even with anchors. What did we do wrong? Could you help please?

@kevinquinlan8354 3 жыл бұрын

Who manufactured the towel bar, please? Thanks!

@rogueplanet13 3 жыл бұрын

Was helpful yea

@karenk100 2 жыл бұрын

You know you're doing something wrong when your walls starts to look like a piece of Swiss cheese....haha.

@TheRenderQ 2 жыл бұрын

Haha! Hopefully you can get your wall patched up! But you’re probably going you have to use some good wall anchors when installing your towel bar! Thanks for watching!

@vinivinivini1000 2 жыл бұрын

One more thing.. sometimes ..some bars have brackets a bit lesser in size(in thickness). U fix them on wall with screws .but when u try to tighten the set screws .u will found out they r unbelievable tight right from the start. In reality the set screws pushing the bracket attached to the wall .nit holding them. Make sure to check that first if u r a newbie.

@user-ko1rt1bu6o Жыл бұрын

شكرا استفدت كثير

@pateresekeating1709 10 ай бұрын

I live in an apartment. My towel racks constantly fall off the wall & door. I have to be so careful hanging my towels light. Anyway, I ended up having to patch a huge hole in the wall & to rehang the bar holder there were no instructions as to which way that silver thing was to face. I took a guess! The “back side” lies flush to the wall! I was afraid to unscrew it & ruin the hole & have to start over again if I had it facing the wrong way! My problem is, IT STILL FALLS OFF!! Anyway, this was very helpful. (But I could definitely NOT need to see a Buddah!!)

@ZE308AC Жыл бұрын

Anybody know what screws are used to make the bar tight?

@Folko 4 жыл бұрын

my towel rack just broke off, so I just made an emergency pit stop on this video. thanks chief.

@TheRenderQ 4 жыл бұрын

You're welcome! Towel bars come loose all the time! I'm glad the video helped! Thanks for watching!

@chrismiller8675 2 жыл бұрын

The screws on the bottom are not screwing into my anchor. When I’m trying to screw them into the anchor it’s like they are just pushing the towel rack off the anchor as I try to screw them in. Nothing is working, they are not easily screwing in like your video. Absolutely maddening I’m literally about to punch a hole in the wall instead.

@jamesnguyen2866 5 жыл бұрын

Can you recommend an anchor we can buy (not the one that came with the towel rack)?

@TheRenderQ 5 жыл бұрын

I just used the plastic ones from the home improvement store. Just make sure it fits the size of screw you are using. I don't know the exact size of the ones I used off the top of my head but I currently have two sizes in my cabinet just in case for various projects. There are also metal anchors that flip out after you insert them into the wall. Those are probably more secure than the plastic ones. The metal flip out ones are useful if the hole in the drywall gets too big for an anchor. An employee at the store could probably help you with the correct size. Hope this helps!

@jsmoney3254 3 ай бұрын

I've already gotten this far and am looking for help because my anchors are spinning and after finaggling with pliers and a screw driver I got the screws flush to the bracket but not tight at all. My holes for the anchors are a little big now too.

@TheRenderQ 3 ай бұрын

I had a towel bar in a bathroom where the hole in the drywall got too big for plastic anchors. To fix it we used the metal folding type. They’re spring loaded so they fold to the size of the hole. Then flip open once behind the wall. Basically put the screw partly into the folding anchor, slip it into the wall and tighten. This will provide a super strong grip. Of course they come in different sizes too. Hope this helps!

@jsmoney3254 3 ай бұрын

@@TheRenderQ exactly the advice I needed, thankyou

@nothingness55 7 ай бұрын

Been trying to rehang mine the past 6 years..still no luck. Th3 holes are just too big and the anchors just keep making larger and larger holes in the drywall. And the screws just either push through the drywall or just hang floppily. I can now nearly stick my entire pinky into the holes.

@davidsonnow 3 жыл бұрын

Can you use those fat drywall screws instead of the fancy anchor you use?

@cripper73 Жыл бұрын

Careful on the plastic toggle anchors. Both anchors on each bracket must be installed so the "wings" of the toggle are horizontal as you push them through the drywall, otherwise when you set the anchor with the red pin the toggles could "touch" each other preventing them from sitting tight against the wall.

@zanderesp4295 Жыл бұрын

When checking if the holes are leveled, do place the level on the center or bottom of the hole?

@cripper73 Жыл бұрын

@zander esp I usually put the first bracket in the wall first then I make sure the second bracket is level with the first. Place the level on top of both brackets and "rest" it on both brackets as you hold the bracket in place with your hand. Then you can mark your holes on the second bracket. Many ways to do it just my preferred method

@user-ud1tn6xl5h 4 жыл бұрын

When buying a replacement bar, do you measure from screw to screw to find out the size? Because my current bar is 18.5" from screw to screw, so I am not sure if I should buy 18" ?

@TheRenderQ 4 жыл бұрын

Yes you could measure screw to screw to get an approximate size. But each towel bar might be slightly different in length so the original holes won’t necessarily work. But to get the length you could measure the bar itself but that also varies with each bar. I think approximate length will be good enough. Hope this helps!

@user-ud1tn6xl5h 4 жыл бұрын

@@TheRenderQ thank you. I am trying to avoid drilling any new holes. Nothing wrong with current bar just trying to update to matte black and now thinking that maybe just painting it black instead.

@jmer9126 5 жыл бұрын

What do you do if you don’t know where the electric wiring behind the wall goes? Can one safely follow the instructions given?

@TheRenderQ 5 жыл бұрын

I'm only a weekend handyman so I'm not exactly sure about how to know where the electrical wiring is located in the wall. On the wall in the video I know there are no electrical wires there. But if I'm correct, most electrical wiring in the walls will be secured to the wood studs. The only ones that aren't will be the ones going across the studs. I've installed a towel ring right above a light switch and electrical outlet in one of my other bathrooms and didn't run into an issue. However, you might ask a friend or co-worker for some additional advice before continuing if you're worried about the wiring in your wall.

@katebasile355 4 жыл бұрын

Are you assuming the studs are wooden? I’m pretty sure mine are steel- is it possible to drill into them?

@TheRenderQ 4 жыл бұрын

Thanks for your question! Yeah I was assuming the studs are wooden. At least in all the homes I’ve lived in. Maybe if you’re in a commercial building like an apartment or condo you would probably have metal studs. I don’t have any experience drilling into metal studs so I can’t really help you there. You’d need a drill bit made for metal plus I don’t know how thick the outside layer of the metal stud would be. But it’s possible to drill into them since the metal studs are hollow. But again I don’t have experience with them. If you’re unsure then I’d recommend using wall anchors for the installation. Hopefully where you need to put the anchors still allows you to place the towel bar where you want it.

@katebasile355 4 жыл бұрын

Actually, I live in Florida and all new construction is concrete block with steel studs. Not commercial...just how it’s done here.

@kofio7581 3 жыл бұрын

Did you have to drill a bigger hole for the side of the towel rail with the wall plug?

@TheRenderQ 3 жыл бұрын

In my demonstration in the video yes I did drill a bigger hole for the wall anchor. I simply compare the size of the screw or wall anchor to the size of the drill bit. I always choose one slightly smaller than the screw or anchor. Hope this helps!

@kofio7581 3 жыл бұрын

@@TheRenderQ Thanks!

@praisegod3768 3 жыл бұрын

A handyman just installed our beautiful new towel bar and medicine cabinet, but both are uneven by about 1/16"!! He used a laser on the wall to measure (rather than a tape measure), and we are so bummed. The wall was freshly painted ... do you think 1/16" is enough to have him come back and redo it?

@TheRenderQ 3 жыл бұрын

I know if the towel bar was uneven it would bother me every time I look at it. So if you feel the same way then maybe have him come back. His laser level is probably more accurate than a tape measure. However as I do DIY projects around the home I find that some walls/windows aren’t exactly level which could be why the towel bar is slightly off. Sometimes it depends on the reference point used for leveling. He may be able to adjust it without too much trouble. Hope this helps!

@praisegod3768 3 жыл бұрын

@@TheRenderQ It helps a LOT! Thank you for taking time to respond! I think I will send him a text and ask him to come back. Sure appreciate it!

@neeyukah 7 жыл бұрын

How are you choosing what size drill bit to use to create initial hole?

@TheRenderQ 7 жыл бұрын

When I select a drill bit, I'll hold up the screw or drywall anchor, then select a drill bit that is just slightly smaller than the diameter of the screw or drywall anchor. Hold the bit up against the screw so you can see the diameter of the screw and drill bit. I hope this answers your question!

@user-hg6em9ue6p Жыл бұрын

What is the name brand and model of this towel bar? Is it steel?

@TheRenderQ Жыл бұрын

I don’t know the name brand of the towel bar I installed. I think I bought it at Lowes or Home Depot. And I think it’s made of aluminum.

@Blackdog4818 2 жыл бұрын

What happens if you need to remove those anchors? Will it create a hole in the wall getting them out?

@TheRenderQ 2 жыл бұрын

Yes! It will definitely leave a hole in the wall when you remove the wall anchors. The hole will become slightly bigger when you pull them out. You’ll need some pliers to grab them and twist to get them out. Of course without the screw in it. Hope this helps!

@Blackdog4818 2 жыл бұрын

Lucked out...only a plastic screw-in anchor, not a toggle. Thanks for the help.

@SoCal9705 3 жыл бұрын

What is the minimum power on a drill to be able to screw in screws like that?

@TheRenderQ 3 жыл бұрын

I don’t think you need a lot of power to screw in screws with a power drill. I have mine on a lower speed setting. And this is an old drill from Eagle Hardware from many years ago... if you remember that store before it became Lowe’s.

@SoCal9705 3 жыл бұрын

@@TheRenderQ Mine has 4.5 A. I never tried to use it that way, but i will. great video.

@Kalyaaye1 2 жыл бұрын

So my husband made the hole too big that anker even went through. Is there a way we can savage that.

@TheRenderQ 2 жыл бұрын

There are different types of wall anchors. I’ve been thinking of making a video to solve the problem you just described. But in the meantime you can use the wing-type wall anchors made out of metal. They have a spring that holds them open when they’re behind the wall. First put a screw through it and towel bar wall bracket. Then squeeze the spring loaded anchor and slip it into the hole in the wall. This will provide an ultra secure hold. You can find these at your local hardware store. I have these in one of my bathrooms. My towel bar isn’t going anywhere! Hope this helps!

@kathrynbradley2108 7 жыл бұрын

If you don't have the anchors included in the towel bar set, which anchors should I look for at the hardware shop? I'm using the same towel bars which had been installed years ago, but the original anchors look unsalvageable.

@TheRenderQ 7 жыл бұрын

Look for plastic anchors like the ones in the video. Bring one of your screws to the hardware store so you can hold it up to the package and see what fits or ask one of the employees. Another thing you can do is ask a neighbor if they have some extra wall anchors. You won't need that many. I suggest asking a neighbor who is handy because I have lots of anchors left over from other projects and you might find someone that has extras just lying around. Hope this helps and good luck with your installation!

@tjam4229 5 жыл бұрын

I like everything about the video, it just makes me cringe when you move the drill around while drilling the hole. Why not just choose a slightly larger drill bit? By moving the drill around in a circular motion, you are less “in-control” of the size of the hole you are making, and going to remove more drywall on the internal aspect of drywall, (The place where you actually want the drywall to be the strongest (around the anchor). Just push the drill in, with as little wobble as possible, then withdrawal. That’s the way the drill was designed to be used. Otherwise, like I said, good video. ) ...Plus, I would’ve checked for studs FIRST. You ideally want the screw to be located in the CENTER of a stud. By finding stud first, you could adjust the position of the towel rod slightly so that the right side is more-likely to hit the CENTER of the stud.

@TheRenderQ 5 жыл бұрын

Hey thanks for the feedback! You're right about choosing the correct size drill bit! I thought I had the proper size but when I realized I didn't my first instinct is to rotate the bit around to enlarge the hole. I know it's not good practice to do it that way. Regarding studs, I did check for studs. On the first towel bar there is no stud on the left but there is a stud on the right (see it at 2:11). With the length of the towel bar, I could only mount it with the stud on one side. But I'm really glad you enjoyed the video overall! Thanks for watching!

@lynngrant1198 3 жыл бұрын

What size drill bit?

@TheRenderQ 3 жыл бұрын

Sorry I don’t know the drill bit size. Usually I just hold the bit up to the screw and pick a bit that is just barely smaller than the screw threads. Hope this helps and thanks for watching!

@carrieleong7476 3 жыл бұрын

What if you have metal studs?

@TheRenderQ 3 жыл бұрын

I haven’t had to work with metal studs before so I’m not sure how much I can help. However you’ll probably need a drill bit made for metal. The procedure is most like the part where I put a screw into the wooden stud. Just don’t drill the hole too big!

@candidoaviles220 2 жыл бұрын

you forgot to say the name of the anchor that you use

@TheRenderQ 2 жыл бұрын

Sorry! I just know those anchors as plastic wall anchors. But thanks for watching!

@human1513 Жыл бұрын

That white screw anchor is not very strong. I havevseen them pull out when soneone removes a towel from the rack.

@TheRenderQ Жыл бұрын

Yeah I’ve seen those anchors come out of the wall. Depends on how rough people are when yanking the towel off the bar. It also depends on whether the proper size hole is drilled. These towel bars are still holding very strong on my wall since I installed them. I’ve used these plastic anchors on other towel bars and towel rings around my house with no problem. Thanks for watching!

@alicew8070 5 жыл бұрын

How many volt is enough for the electric drill? I don’t want to buy the wrong one. Thank you.

@TheRenderQ 5 жыл бұрын

I don't think you need a lot of volts for the drill. Any basic drill will work. Buy an affordable one. My drill is more than 15 years old and it still works. I didn't pay any attention to the specs of the drill when I bought it. I had to repair the cord once but it's the one I used in this video. Hope this helps!

@alicew8070 5 жыл бұрын

TheRenderQ thank you.

@ultrarunner0476 6 жыл бұрын

sometimes the manufacturer will include a paper template to make the process easier!

@TheRenderQ 6 жыл бұрын

Yes! You know what? This towel bar actually had the template printed on the inside of the box. I didn't know it was there until I was done with the installation and in the process of flattening the box to recycle it!