Thanks for the tip!🥰️ -TRW Mireya

Thanks for watching! We're happy to help. Let us know if this method works for you!! - TRW Haley

Awesome, that's what we love to hear! - TRW Haley

I'm so glad we could help! Weeding small details can be so tedious. If you're not careful, you could even ruin the integrity of the vinyl. -TRW Bri

Thank you so much for sharing! That's what we like to hear. 😊 - TRW Haley

Wow, thank you!😊 -TRW Mireya

Glad it was helpful! - TRW Richard

Great! Thank you so much! ❤️️ -TRW Haley

Glad it was helpful! -TRW Bri

You got this! -TRW Abby

Same to you! -TRW Crystal

Right on! We love to hear that 🥰️ - TRW Haley

Glad we could help! -TRW Abby

Hey! That's a great idea. I'll have to add that one to memory. - TRW Richard

It's surprising how something so simple can really impact your efficiency :) -TRW Bri

You are welcome! You can check out other tips in our vinyl production playlist, found here: kzfaq.info/get/bejne/iNapeM2qnLqlZZ8.html

Thanks for watching! -TRW Abby

Yay great! Welcome to the crew, you're about to learn sooo much! We have free live trainings every Monday evening at 8pm est. Come check it out if you're free - have a super day! :) -TRW Erika

Have you always used a light board? - TRW Richard

Glad we could help save your project! -TRW Crystal

You are so welcome! 😊 - TRW Haley

You are so welcome! ❤️️ - TRW Haley

I'm so sorry to hear that! I hope this next one turns out amazing for you! Let us know if you have any questions.😊 -TRW Mireya

Welcome to the crew! I am sure you will get it in no time🥰️ -TRW Mireya

Awesome! So glad it helped you.

You are so welcome!

So happy to hear we could help! Thank you so much for watching! -TRW Maegan

I'm glad we could share the knowledge :) It's nice to be helpful! -TRW Bri

So glad to help! Tips and tricks are our fave! -TRW Crystal ******Did you know? ~We're live EVERY Monday night at 8pmEST on our KZfaq channel! ~~We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. ~~~You can hang out, ask questions and have fun as we go!

@@TheRhinestoneWorld Thanks will do.

Thanks so much! I'm glad we were able to help you! 🥰️ - TRW Haley

Thank you so much for your support! -TRW Maegan

Thank you! 😊 -TRW Mireya

Glad it was helpful! 😊 - TRW Haley

It makes life sooo much easier, that's for sure! -TRW Crystal

isn't it amazing how much that reverse weeding hack saves you? It's amazing! -TRW Pilar

You're very welcome! I'm glad we could help :) -TRW Bri

Glad it was helpful! We're live Monday 8pmEST if you'd like to hang out with us while we craft, chat, and enter the cameo giveaway! :-) -TRW Crystal

Thanks! Matt and the rest of the TRW Crew are always working to try to change and improve the vinyl game. - TRW Richard

Glad it was helpful! We have a special free Live training Thursday night 8pm EST if you're available. -TRW Pilar

Glad it was helpful! If you have any questions, let us know. We are here to help you on your crafting journey. -TRW Tanyu

Thanks man! Keep on grindin'! - TRW Richard

Our pleasure! 💕 - TRW Haley

You can do it! Be gentle when weeding this way as to not pierce your transfer tape. I prefer to use a medium tack tape for this, but if you're gentle then just about any kind will do. We have other videos showing reverse weeding if you'd like to see more :-) -TRW Crystal

Happy to help!

You're welcome! Do you use a light board? - TRW Richard

TheRhinestoneWorld yes I do...it so great and helps a lot..I was doin the dust powder on it hen I first started..😂😂😂🤷🏼‍♀️

If you currently do not have a cutter you want the Cameo 4 for sure. Portrait has many limitations. We even have small starter kits on our website where you basically get the material FREE. Here is the link: trw.fyi/2SQfCIC

You're so welcome! 🤗 - TRW Haley

You are so welcome! We really love newbies, we take great pride in teaching. If you want to see some rhinestone dazzling, we're live on youtube Monday 8pmEST! To join in the chat as we go, hit subscribe then click the live chat button during the live. :-) -TRW Crystal

@@TheRhinestoneWorld Thank you, Crystal for your reply and I just set my alarm for Monday 8pm central time because I live in Texas. My calendar will be on repeat weekly as well. 🤭 I enjoy learning new things and especially something I LOVE doing. It will be my very first live viewing. Hopefully I can figure it out with the instructions you sent. 😁

We're always here if you need us! What projects do you already have experience in? Often we can build learning off of that. Regular adhesive vinyl? HTV? Still have the machine in the box? LOL -TRW Crystal

Well, Crystal, I wouldn't say experience in 🤭 but trying. It all started when my hubby decided I should expand my crafty creations and bought me a Vinyl Master. He couldn't just buy a normal small Cricut or silhouette for me to learn and the software was very challenging for me to learn. Especially, when I have a very extreme case of ADD. 😁 I won't fib, I didn't pull it out of the box right away, and when I finally did last December, I walked away from it for a bit because of intimidation. I did learn how to do stencil vinyl after many mistakes and cussing. 🤭 I ended up making my Momma a glass table for my Daddy that we lost in August 2021. I etched it with an image I purchased on Etsy and figured out how to use stencil. Then I moved on to HTV, was that an eye-opener? Heat transfer tape, htv, shiny side, mirror, don't mirror, supplies, supplies, supplies. 🤯🤯🤯😵‍💫 I truly enjoy a challenge and never give up. So, here I am to Rhinestones, epoxy glitter, and sublimation tumblers. Or whatever else I can sublimate. I just finished my 1st pair of Houston Astros Converse with HTV and a glitter epoxy tumbler with Rhinestones. I would be honored and grateful to learn from people like you guys.

I understand the ADD very well! In moments of hyperfocus things can either line up perfectly or go fully sideways hahaha! My favorite saying is, if you never stop trying then you can never fail. We're always here to help if you need us! We love answering questions. We also have a facebook group if you'd like to show off your creations, or for extra support! :-) facebook.com/groups/592565454142124 -TRW Crystal

So glad you liked these hacks! Thanks for watching! 😊 - TRW Haley

Yes it will, thanks for watching and good luck! -TRW AL

Thank you very much! -TRW Bri

You're so welcome! 😊 - TRW Haley

Yes it is! -TRW Bri

Thanks! We are still working on a time machine, but at least you can try this next time! - TRW Richard

Thank you for the kind words! Be sure to keep an eye out for more awesome videos! -TRW Abby

You're welcome! -TRW Bri

For more slick tips, check out our vinyl production tutorials, found here: kzfaq.info/get/bejne/iNapeM2qnLqlZZ8.html - TRW Richard

We aim to please! -TRW Bri

No, thank YOU! -TRW Bri

Yesss🥰️ -TRW Mireya

LOL! Doesn't it always happen like that? Thanks for watching 😄 - TRW Haley

Awesome. We love to share tips and tricks that will make crafting/life easier. Glad this video was helpful. Thanks for watching. BTW JOIN US Monday 8PM EST on our KZfaq channel. You don't want to miss Matt and a special release. Hope to see you there. -TRW Tanyu

More like a light table, wow, way to upcycle. Just be cautious, better safe than sorry 😘 -TRW Crystal

Thanks! -TRW Bri

Thank you! 😊 - TRW Haley

No problem 👍 -TRW Abby

Just replace it back to it's original backing once you're finished. To ship you can either put it in a regular letter envelope if small, or fold a piece of cardboard around it in a manilla. -TRW Crystal

Thanks! It really helps with the small details. -TRW Bri

Thanks! I'm glad we could be helpful. -TRW Bri

This is a decal for a car, or use it as a sticker to put somewhere. It would not go on a shirt. -TRW Mireya

@@TheRhinestoneWorld I am not sure you even read my comment, but you sure didn't comprehend it. I said, "like a car or window". It isn't our(the decal makers) fault if a customer takes off a part of their decal, but I like to avoid that possibility by suggesting a decal with less detail if it is going to be used on a car or any other surface that will be washed.

Glad we could help :) -TRW Bri

You came to the right place. We have tons of full tutorials on our KZfaq channel and lots of tips and tricks on all our social media platforms. Welcome to the Crew. Thanks for watching. -TRW Tanyu

You're welcome! -TRW Crystal

Thank you! -TRW Bri

Thank you so much for your support! -TRW Maegan

Try out this video. It covers various materials and shows the best ways to find your settings. kzfaq.info/get/bejne/ad2CeJCmnbStfok.html -TRW Crystal

@@TheRhinestoneWorld Thank you. I'll go watch that.

Thank you! -TRW Bri

I personally have not. The adhesive is just adhesive, there's no activating it. Basically removing it from the carrier breaks those "press lines" the blade makes as it pushes down to cut. It doesn't stick any better or worse than just a regular roll of vinyl sitting around. I do, for extra insurance, make sure I squeegee it back down to remove air bubbles that can make it not adhere as well, and sometimes like to press my decal between two pieces of cardboard and tape the cardboard here and there just so it can't shimmy out. It keeps it from being damaged in shipping (bends etc). -TRW Crystal

When you reverse weed there is more touching involved to the back of the decal than normal. For that we would suggest trying to refrain as much as possible touching the back of the decal, a little oil from your hand won't hurt the integrity of the stickiness of the decal though. -TRW Bobbi

Thanks for the visit! Glad it was a useful tip :-) -TRW Crystal ******Did you know? >We're LIVE -- EVERY Monday night at 8pmEST on our KZfaq channel! >>We TEACH how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. >>>You can hang out, ask QUESTIONS and have FUN as we go! >>>>We also offer tiers of paid MONTHLY subscriptions that have a variety of PERKS, sneak PEEKS, extra TRAINING, free DESIGNS, first DIBBS on new products, extra COUPONS, and FONTS all depending on the tier level selected!

@@TheRhinestoneWorld sounds good thank you... I will try to get in touch on live...

We'll be happy to have you! If you miss it, we do this every Monday so there'll be another chance :-) We're here if you have any questions! -TRW Crystal

@@TheRhinestoneWorld thank you very much for been so nice, yes I miss it because work but I will take a look for the saved program 😄...

Thanks! It's amazing how much reverse weeding helps with those tiny details! -TRW Pilar

Here is a video that may be able to help! kzfaq.info/get/bejne/rqqaaLZp1KiRmaM.html&t -TRW Abby

We use Siser and ColorSpark HTV, neither of which have white carrier sheets! They both use a clear carrier sheet. - TRW Haley

Amazon! Check out our must-haves here: www.amazon.com/shop/therhinestoneworld - TRW Haley

Thanks for your feedback, Judy, I will pass that along! - TRW Haley

Yes, if you're laying your hand on it to reach pieces. I like to kind of spider web my fingers and only touch areas that won't be needed. Another way cool trick... parchment paper. If you're heavy handed then this is what you'll want. It won't stick to any of the decal surfaces, and if you forget, lay your hand down, then you're fine. Just keep the area you're not weeding covered, move, repeat. -TRW Crystal

Reverse weeding is a life saver sometimes! -TRW Crystal

We use different tapes for different materials, but ColorSpark Medium Tack Application tape has been my go-to lately! - TRW Haley

Here is a video that may be able to help! kzfaq.info/get/bejne/o7V0YJN7ysXZgoU.html -TRW Abby

My Graphtec 8600 is great at it.

We try everything to be efficient :) -TRW Bri

Yes! If you can get the small things right, the big parts of the project are a breeze! - TRW Richard

He uses one of our R tapes: www.therhinestoneworld.com/search.asp?keyword=transfer+tape -TRW Crystal

Not an easy way to do that, since after you reverse weed the first color, if you were to apply that transfer tape to the second color, any adhesive vinyl UNDER the first color will stick to the first color. What you could do is apply separate transfer tape to each decal color and reverse weed them both. Then, whichever color is to be the bottom or back layer, use our squeegee trick to roll the app tape off the back layer decal. To do this, place the protective backing sheet back on the decal. Flip it over and apply pressure from your squeegee to the decal as you roll the app tape off of the decal. Then, layer your top layer on top of the back layer as you'd normally do with our parchment paper trick. -TRW Pilar

@@TheRhinestoneWorld thanks for the advice. You don’t happen to have a video showing how to do this do you?

We do show how to use the squeegee trick in this TikTok! www.tiktok.com/@rhinestoneworld/video/7042136893051620655?is_copy_url=1&is_from_webapp=v1 -TRW Pilar

We have it linked on the homepage of TheRhinestoneWorld.com, look for the thumbnail that says Products We Love then click Production. We don't sell the things from these sections but we enjoy helping people to find really helpful products with the links right to the exact things we use :-) -TRW Crystal

Are you using our ColorSpark vinyls? Either the brand is the issue or the cut settings needs adjusted a touch. We have a great video on our channel on how to find your cut specs and settings by testing a lot of our materials. It's a touch long but soooo worth the watch! -TRW Crystal ******Did you know? ~We're live EVERY Monday night at 8pmEST on our KZfaq channel! ~~We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. ~~~You can hang out, ask questions and have fun as we go! ~~~~We also offer tiers of paid MONTHLY subscriptions that have a variety of perks, sneak peeks, extra training, free designs, dibs on new products, extra coupons, and fonts depending on the tier level selected!

Thanks for the reply! I watched the replay and I figured out my cut settings for my matte vinyl.

Awesome, glad to hear it! -TRW Crystal

Thanks so much! We love to share our favorite tips and hacks to help others avoid some of the mistakes many people face when using a vinyl cutter. Do you come to our weekly FREE Live trainings? Every Monday night, Matt goes Live right here on our KZfaq channel, to teach how to make different items, offer discounts for the attendees and answer any questions you may have. They're really amazing and we have a lot of fun with them. Hope you can join us! Monday night, 8pm EST. -TRW Pilar

Ooof--yeah that can happen but sounds like an amazing order! Great job! -TRW Pilar

Do you mean parchment paper like we use to layer with? -TRW Crystal

I've heard a lot of "I wish I knew that earlier!" Now I wish we released the video earlier LOL. I'm sorry the video wasn't super clear! Hopefully our design team will release more doggy designs soon :) -TRW Bri

For now, I'm only positive the hack works well with FDC. I can't imagine why it wouldn't work with HTV, though. Feel free to try it :) -TRW Bri

Thank you. Can't hurt, right? I have smaller designs for masks that I sometimes have issues weeding so I'm going to give it a try.

I'm glad we could help you! Some orders can be a bit overwhelming. -TRW Bri

Hey! Glad to hear it. I'm didn't know people could even read a 4pt size font. - TRW Richard

Hi curious as to what is a powder pounce pad?

@@koru65 A pounce pad is a soft pad with fine colored chalk in it that sign painters and quilters use to transfer patterns. It also works great on vinyl sign material and heat vinyl. After you cut your vinyl you just wipe the pad on the vinyl and the powder will show the cut lines very clearly without a light box. After you weed the vinyl the powder will just wipe away. The powder will not affect the adhesive in any way. It's called the HANCY QUILT POUNCE PAD. They are available on etsy, e-bay and Amazon. It will eliminate the frustration of weeding and save a ton of time.

I'll be sure to pass your suggestion on to Matt, it seems very interesting. :) -TRW Bri

@@dtacklind that sounds super messy !!!

@@Daniel_Plainview It's not messy at all. The fine powder wipes off and doesn't affect the vinyl glue.

We've made some changes and are in the process of updating all links in videos. I went ahead and updated this video just now, so everything is in working order now, just refresh your screen and it's good to go! :-) -TRW Crystal ******Did you know? We're live EVERY Monday night at 8pmEST on our KZfaq channel! We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. You can hang out, ask questions and have fun as we go! We also offer tiers of paid MONTHLY subscriptions that have a variety of perks, sneak peeks, extra training, free designs, dibs on new products, extra coupons, and fonts depending on the tier level selected!

Thanks for the Comment. Yes, this overall decal size was not small. However, there were parts of the decal that were very small cuts and if you are missing an Eye on a dog design that can make a big difference in the look of the design.