@AbdullahNaseerHayRee 4 жыл бұрын
Faisal bhai bht awla ... 👍👍
@FaisalQayyum 3 жыл бұрын
You're welcome
@khalilnaciri2547 4 жыл бұрын
Thank you for sharing brother
@FaisalQayyum 3 жыл бұрын
No problem
@user-cs9mi7vd6c 2 жыл бұрын
Good
@bouafiaabdelhak2386 2 жыл бұрын
Very nice video man .
@omarbensaid4365 2 жыл бұрын
Thank you for this amazing tutorial, I would like to ask you about the possibility to share with us The simulation of SHAPE MEMORY POLYMERS, it's a kind of smart material that could remember its original shape after deforming it when we exposit to a stimulus like HEAT??
@pierretizemha899 3 жыл бұрын
Hi Faysal, can you please do a tutorial on a thermomechanical simulation in compression (respectively in tensile test)taking into account an electric heater at the end of the specimen ? thanks for your answer.
@FaisalQayyum 3 жыл бұрын
Heyy Peirre, I believe that's not complicated. In these simulations the hearing source is not really defined, rather, heating is stated as a surface heat flux. You can calculate total heat flux from the electric heat source and apply it in the simulation model and I believe it should work fine. Did that answer your question ?? If no, try emailing me your detailed problem for further discussion.
@pierretizemha899 3 жыл бұрын
@@FaisalQayyum Hi Faisal, Thank you already for responding to my question. In fact, I want to do an experiment on Gleeble using it as comparison results. For this, I have to do a 3D dynamic compression/traction test to simulate the electrothermomechanical effect. that’s kind of my problem. Maybe you can direct me . Thank you
@JaneTsang531 5 ай бұрын
Could you share the temperature-dependent plastic strain material properties?
@FaisalQayyum 5 ай бұрын
Yes I can . Please email me at fysalqayyum@yahoo.com
@pierretizemha899 3 жыл бұрын
Hi Faisal, i recontact you again to ask you something about induction heating. Is-it possible to do a numerical simulation of induction heating in abaqus ??? if yes, can you please help me by giving me a simple example ???
@FaisalQayyum 3 жыл бұрын
Yes, Pierre, I remember that you asked this question earlier. I'm not sure what do you mean by the "numerical simulation of induction heating". If you are heating a sample by using induction in a physical experiment and you want to replicate those boundary conditions in the numerical simulation, you do not have to actually model an induction coil. Just calculate the heat flux produced by the induction system using some simple formula and apply it to the sample surface directly in the numerical simulation model, as I showed in this video. I hope it answers your question.
@veeturivarun5201 3 жыл бұрын
Hi...i would like to study the mechanical property deterioration with respect to temperature.... Is it possible without VUMAT/UMAT or is it necessary to have a VUMAT/UMAT?
@FaisalQayyum 3 жыл бұрын
What do you mean by deterioration? If you mean material softening due to increase in temperature then you do not need VUMAT/UMAT
@veeturivarun5201 3 жыл бұрын
@@FaisalQayyum ok... thank you
@kaiyang6470 3 жыл бұрын
I want to calculate the thermal mode of a composite material. How do I calculate the buckling temperature of a material?
@FaisalQayyum 3 жыл бұрын
It is an interesting question but I cannot answer it here in comments section. If you would like to discuss it in more detail we can have a shot chat on some other platform. Check faisal.qayyum.com/contact for getting in touch
@MJs-85 3 жыл бұрын
why can't i see transient or steady state response in my abaqus ? is that cause of student edition ?
@FaisalQayyum 3 жыл бұрын
Should not be, the student edition is as good as any other edition. It is just that it is only for learning and with that edition, you cannot do legal commercial work and earn money.
@turanturan2831 3 жыл бұрын
Sir, why do we choose solid homogeneous in shell 2D?
@FaisalQayyum 3 жыл бұрын
Because we assume that the material is solid and homogenous.
@hoainamtrinh568 3 жыл бұрын
could you please share the material library file ?
@FaisalQayyum 3 жыл бұрын
Yes I can if you write me an email at fysalqayyum@yahoo.com
@omarbensaid4365 Жыл бұрын
@@FaisalQayyum I want the material library too
@FaisalQayyum Жыл бұрын
@@omarbensaid4365 Please send me an email at fysalqayyum@yahoo.com
@sthanu12 3 жыл бұрын
Hello Sir, can you please share your material properties info in the form of an excel file or pdf to reproduce your results? any help is greatly appreciated.
@FaisalQayyum 3 жыл бұрын
I can try if you send me an email at fysalqayyum@yahoo.com
@VIMALKUMAR-ll9mg 2 жыл бұрын
sir, i need ur small help. i was trying to connect you from various other sourses but failed. plz response sir. i am working on my project regarding thermomechanical response of soil, so i need to simulate . sir can u please help me out. i will be indebted for this.
@mohamedbadr3824 3 жыл бұрын
How can I get the plastic strain at different temperatures?
@FaisalQayyum 3 жыл бұрын
You can use field output data for a specific node to get plastic strain at that node for the whole simulation. Or you can use Path output function to get data at a specific frame on a series of nodes.
@AwaisAli-bq7gz Жыл бұрын
AoA sir.....sir i do not have modified4340 file in library,,,,how an i add that?
@FaisalQayyum Жыл бұрын
Write me an email at fysalqayyum@yahoo.com and I'll send it to you.
@AwaisAli-bq7gz Жыл бұрын
@@FaisalQayyum ok
@AwaisAli-bq7gz Жыл бұрын
@@FaisalQayyum i have written and sent the mail
@AbdullahNaseerHayRee 4 жыл бұрын
Can these analysis be done in abaqis student edition?
@FaisalQayyum 4 жыл бұрын
I think yes
@Aketi15 2 жыл бұрын
Can you share the model in the video
@user-lg6sp6nx7m 2 ай бұрын
sir,can you share the modified 4340 file,i have written and sent you an e-mail
@yourevolution7850 2 ай бұрын
5:28 bruh You kidding me?
@FaisalQayyum 2 ай бұрын
No I am not
Abaqus Acumen
Рет қаралды 12 М.
Abaqus Acumen
Рет қаралды 21 М.
Good Vibrations with Freeball
Рет қаралды 92 М.