Project SRI - Part #4 - Timing Belt Time!

  Рет қаралды 243,537

The Savage Garage

The Savage Garage

Күн бұрын

So in this episode i walk you through a timing belt job on a vauxhall astra 1.8 DOHC timing belt replacement, Enjoy!
Contact Email: thesavagegarage2016@gmail.com

Пікірлер: 216
@hibbs79
@hibbs79 5 жыл бұрын
This was a great video. Enjoying watching all your old stuff. Cheers. 👍
@Kev72Pembs
@Kev72Pembs 6 жыл бұрын
Thanks for a well informed video. Great to see with the engine out of the car. Makes it a lot easier to see how the job is done properly. Many thanks
@NW0106
@NW0106 8 жыл бұрын
Great video, you make it look so easy. I think I'm confident enough to give it a go myself but first I need to buy myself a torque wrench. Keep the videos coming, they really do give people the confidence to try and fix it themselves. Thanks!
@cybergothiche2
@cybergothiche2 4 жыл бұрын
Good video, well explained, well shot, well narrated. Thanks for the tips :)
@Megalocade
@Megalocade 5 жыл бұрын
That water pump design reminds me of when vauxhall used to use the water pump as the timing belt tensioner back in the day, you had to spin it round manually to do the tension, pain in the arse, those 3 little Allen bolts holding the pump into the block always used to strip. Those 1.8 timing tension bolts are a pain they always strip out because they are way to shallow for the torx to get a proper grip, i used to take an angle grinder to it and shave of the sides down so i could fit a spanner on it, always worked.
@michaelwhyte4069
@michaelwhyte4069 5 жыл бұрын
Quality idea! Having a nightmare with mine, thank you.
@NickHudson2
@NickHudson2 6 жыл бұрын
Great video bud and top job on that belt change never would have known it was your first go 👍
@kaibrown987
@kaibrown987 5 жыл бұрын
Brilliant. Planning to do mine soon. Had a rough idea but now I know actually.. well done. Nice one 👌😁
@magnussvensson5304
@magnussvensson5304 6 жыл бұрын
Thanks for a good video. Helped me a lot. Same problem with the tensioner bolt, used a grinder. 2 min extra work, no bigger problem. Over all a good economical engine from GM, 296000km and still kickin good. Greetings from Sweden.
@user-sf7kl9uh7k
@user-sf7kl9uh7k 2 ай бұрын
Z18XE? The best GM engine since the 20ne, the Z18XER seems to lose head gaskets
@marktahu2932
@marktahu2932 Жыл бұрын
Thank you very much - I have to do my grand-daughters Astra very soon, so this is very helpful.
@ademc8872
@ademc8872 6 жыл бұрын
Supporter from Belgium. Keep up the good work mate!
@peterchastain8120
@peterchastain8120 8 жыл бұрын
just watched the tool box tour video. really liking this channel.
@shishuali4821
@shishuali4821 8 жыл бұрын
Thanks for the video I really enjoyed that...so much easier when the engine is out if the car
@deanmclone8379
@deanmclone8379 8 жыл бұрын
well another cracking video :) im really enjoying watching these and looking forward to the next one :) keep it up buddy!!
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
Thank you so much! I'm glad you are enjoying the project so far! Next episode should be up Sunday :)
@Shadow666790
@Shadow666790 8 жыл бұрын
Cheers for another video man! Great content! You definitely appear more confident than your previous videos!
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
+MerDjence Thankyou! remember i am still new to youtube! Only been doing it a year and a bit! Thankyou for watching :)
@rosscharlie5349
@rosscharlie5349 8 жыл бұрын
if that's your first belt change you did very well congrats Daz
@yusuf.alajnabi
@yusuf.alajnabi 6 жыл бұрын
I just watched the whole video excellent job for a first time round and I'm glad you use a torque wrench thumbs up from me 👍
@steveoutdoors5964
@steveoutdoors5964 8 жыл бұрын
Great video James keep them coming :-).
@andynorris3537
@andynorris3537 7 жыл бұрын
great video/ channel. I had exactly the same issue doing my belt on my old bertone. took an angle grinder to it carefully!
@mustafamurtadha8419
@mustafamurtadha8419 7 жыл бұрын
Mate this is just great. Really a breath of fresh air at the end. Am really inspired to do my own Corsa 1,4 sport 2001. Its the same engine I guess?. Thanx bro!!
@rockypupoxo
@rockypupoxo 6 жыл бұрын
just come across your videos , fair play to you for doing a cambelt even tho it's your 1st time respect is due !
@LucaCarMods
@LucaCarMods 8 жыл бұрын
Great video👌! Good to see someone just working on his car who is learning by doing.
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
+Luca Car Mods Thanks alot mate! Best way to learn :)
@antgerada
@antgerada 7 жыл бұрын
Those torx on the tensioner are a right pain. I've always just used the Allen head socket on the tensioner mechanism and turned that anti-clockwise and that has loosened the main torx holding bolt. Tip for next time! Saves you breaking out the drill and chisel, especially if the engine is still in the car.
@michaelwhyte4069
@michaelwhyte4069 5 жыл бұрын
Cheers for that having a nightmare with the bolt on an x16xe, Corsa b (bloody tight engine bay) I'll give it a go in the morning before I carry on drilling the bolt. Thank again!
@CarsExposed
@CarsExposed 5 жыл бұрын
Watching some oldies mate 😊👍
@dav2jz
@dav2jz 8 жыл бұрын
Great video! Never in my life have I used my External Torx Sockets. You seem to use them in EVERY video Lol,
@tonyn9858
@tonyn9858 8 жыл бұрын
excellent video mate
@sandydogy
@sandydogy 6 жыл бұрын
Thank you, I have always wanted to know how this is done, now I can see
@JustAnOrdinarySimmer
@JustAnOrdinarySimmer 3 жыл бұрын
I've had the joys of doing this job this past week...timing belt tensioner bolt was a bastard to get out - ended up using a hammer and chisel on it and eventually cracked it loose.. the water pump is a different story though, 3 days of constant whacking and wedging for it to budge..with the engine still in the car etc (zafira)..safe to say the water pump came out in several broken pieces
@jaywest1503
@jaywest1503 8 жыл бұрын
Nice video , to make it easier to turn over you should take the spark plugs out, also you should turn the engine over at least two times to confirm the marks are still aligned correctly
@thomaswouters9141
@thomaswouters9141 5 жыл бұрын
Exactly what I was going to say, covers will go last after 2 complete cycles
@GWAYGWAY1
@GWAYGWAY1 5 жыл бұрын
Jay West what did you do to the new pulley it looks like a chisel job on that as well . The thread is checked against the stud that came out. I agree with the bolt as the new one was scrunched ouff the packet
@mcmechanic8910
@mcmechanic8910 8 жыл бұрын
I used to work for Vauxhall...9 times out of 10 those tensioner bolts are always a pain
@stephxryan
@stephxryan 6 жыл бұрын
Fair play mate wish i had a garage/drive way to do my own repairs but then who knows maybe i would have loads of parts just laying around and me saying ill get around to it soon 😂 kool video keep it up ☺ 👍
@davouchi1
@davouchi1 7 жыл бұрын
great video mate. Thanks 🖒
@babelonchabalala1690
@babelonchabalala1690 5 жыл бұрын
Currently busy with Opel/Vauxhall Meriva 1.8 Z18XE petrol timing kit changing. According to your video it's exactly the same engin. Had the same trouble with getting that tensioner bolt out. Allen key broke. So i grined a groove into the bolt head with an angle grinder, took a 5 pound hammer and chizzle, and it came off. Thanks for the torque specs. Now i can finish up the job. Just need a second opinion on the cam markings. They should'nt be exactly in line. Left should be slightly above right according to manufacturer
@chataboxload8607
@chataboxload8607 5 жыл бұрын
looks easy when engine isnt in the car ,but soon see doing this job as soon as parts arrive, very helpful video thanks,although didnt mention crankshaft marks until late in the video,
@Libyancreative1
@Libyancreative1 5 жыл бұрын
Good job, thank you for this useful video :)
@op-tim_auto
@op-tim_auto 6 жыл бұрын
The easy and smart way is to just move anticlockwise that part that has the Allen key hole in it, just like you do when you adjust the tensioner, the screw wil be engaged and undone by that part with the Allen key hole..
@chazevans1044
@chazevans1044 2 жыл бұрын
Fantastic video, have Vectra 1.8sri myself, been tinkering with it, to be honest I like these engines they seem to have enough space to work with, the best part of it all is seeing an engine been taken out. Thinking of doing mine now.. great work. Keep it up. 👍
@robertopolizzi2684
@robertopolizzi2684 4 жыл бұрын
Nice scooter in the end of the place!!!!
@cba360
@cba360 6 жыл бұрын
Did a zlet timing belt other day and tensioner bolt was a pain on that, but I’m sure the tensioners are supposed to be set anti-clockwise rather than clockwise on gm otherwise tensioners fail. Also when you put timing belt on gates say to around anticlock wise starting at crank, stops the crank moving which unless it was a dodgy angle the white mark had moved to 5 o’clock on the crank gear
@Hdj79
@Hdj79 8 жыл бұрын
Hey mate timing on cam looks half tooth out also crank mark looks full tooth out, left hand drill bits would got that torx out easy as for future reference all the best cheers.
@allanmichealsmith
@allanmichealsmith 6 жыл бұрын
Just watching some of your older videos James seen as I'm off , that water pump looked like it could release a lot of stress haha I like how you started soft with a rubber mallet then end hard core with the mini sledge hammer 👍 who needs the gym when you have a vauxhall repair. Speaking of vauxhalls have you done the corsa c anti roll bar bushes I suspect that's causing some knocking over bumps but there doesn't look a lot of room to work with, from what I see it's a lot of underneath working blind then to the engine bay , I imagine it's fiddley?
@JN.0_o
@JN.0_o 8 жыл бұрын
I wish there was a video like this on the VVT version of this engine. I've got to change the sprockets and as far as I'm aware they aren't keyed and they can turn independently of the cam shafts. What a faff on.
@thegamermichael6954
@thegamermichael6954 6 жыл бұрын
nice one bro very informative
@syub4099
@syub4099 8 жыл бұрын
wey aye good stuff mate......
@onurutkan
@onurutkan 7 жыл бұрын
i loved it ! :)
@urdead2meboy
@urdead2meboy 6 жыл бұрын
only thing id say is I would crank the engine over by hand a few times when I can still see the timing marks but awesome video man love it
@hq-074
@hq-074 6 жыл бұрын
Thanks mate for showing step by step some guys on this youtube should take a leaf out of your book most of show your half a story keep up the good work
@stefang6622
@stefang6622 2 жыл бұрын
Great tutorial. Thanks
@Mechanical803
@Mechanical803 7 жыл бұрын
great job
@cgreer933
@cgreer933 8 жыл бұрын
yina it blows me away mate at some of the stuff you do. I have been a mitsubishi technician for 4 years now and I work with some "professional" techs who wont do anything bigger than servicing because they are scared of a bit graft. where is you have no vehicle qualifications to your name and your pulling engines out, replacing timing chains and seem to know quite a substantial bit about vehicle repair. well done mate. keep it up!
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
+Caillin Greer Comments like this make my absolute day! Thankyou very much for the kind words bud, i try my best! I guess having a passion for this stuff can drive you on to do more than just wanting to get a paycheck every month.. I suprise myself sometimes on the knowledge i have considering i have never had any professional training. Thankyou for watching and im glad you enjoyed!
@johnocallaghan9252
@johnocallaghan9252 6 жыл бұрын
Timing Belts
@catche3362
@catche3362 6 жыл бұрын
Bravo !
@tazgrant4521
@tazgrant4521 6 жыл бұрын
How did you stop engine turning over when you did crankshaft pulley bolt to specs? Also in manual it says to replace with new bolt and some blue locktite thread lock on threads when replaced. Thought I would mention that for other home mechanics to no.
@greensillest
@greensillest 6 жыл бұрын
Great video, had the same issue with the tensioner torx bolt, mine ended up twisting a brand new T40 impact bit. Glad I wasn’t the only one!
@oikiakaeidi
@oikiakaeidi 6 ай бұрын
Same engine on meriva A and still works like brand new. Only using 5w30 oils as its the best for this motors
@joelcanela5956
@joelcanela5956 11 ай бұрын
Excelente!
@becomematrix
@becomematrix 6 жыл бұрын
👍🏼👍🏼 dead blows on the impact tool will shock it free
@team3383
@team3383 2 жыл бұрын
Cool Video.
@guillermolopez4258
@guillermolopez4258 Жыл бұрын
Bravooooo!!!
@JanDootjes
@JanDootjes 8 жыл бұрын
Nice one again James. Good camera work and fine instructions. Plastics, plastics and more plastics, that's alot of plastic on that engine. Changed a leafspring on my Landy today, one more to go. Oké thanks for the vid man, keep up and I will follow!
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
+RED h.c. Thanks again bud appreciate it! Yea alot of plastic lol i dont suppose your 'Jeep' has that much plastic lol! Thanks for watching as always!
@JanDootjes
@JanDootjes 8 жыл бұрын
+The Savage Garage It's not a J**P!!! Bye
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
Haha im only messing mate!
@steveoutdoors5964
@steveoutdoors5964 8 жыл бұрын
+The Savage Garage Landy owners can get a little upset if you use the J word lol. Got a cousin who is landy mad I'm often referring to it as a Jeep, really passes him off too.
@sandythekop6107
@sandythekop6107 2 жыл бұрын
Well done,,
@javadvafamehr7670
@javadvafamehr7670 5 жыл бұрын
Good job ,thanks
@enioferreira5272
@enioferreira5272 4 жыл бұрын
Nice video as I am planning to do on my 2004 Ford Fusion 2 this video just encouraged me to do it. My question is do I need to take the engine out to replace the timing belt
@alhdraoy
@alhdraoy 6 жыл бұрын
Good Work
@MrViegar0
@MrViegar0 8 жыл бұрын
top job you have inspired me to do my c20ne corsa combo timing belt myself
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
Awesome! Let me know how you get on with it :) if I can do it you can too!
@MrViegar0
@MrViegar0 8 жыл бұрын
+The Savage Garage I'll let you know might stick a video up I can find my own gopro
@MrViegar0
@MrViegar0 8 жыл бұрын
+suzuki guy (1 arm bandit) old *
@andytaylor9032
@andytaylor9032 8 жыл бұрын
Nice vid, so much easier with engine out!.
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
Much easier! Thanks for watching
@bentester9378
@bentester9378 7 жыл бұрын
If you get a punch and tap the Allen key bit on the tensioner and tap it anti clockwise it undoes the bolt when there rounded out, 😉
@pauldoherty8432
@pauldoherty8432 5 жыл бұрын
Great vids ... just one thing , one click on the torque wrench is all that is required and no further
@usmanrabbani2062
@usmanrabbani2062 7 жыл бұрын
hey, regarding the white tipex mark on the 2 top cranks. were they marked by the manufacturer?
@georgegalpin7352
@georgegalpin7352 4 жыл бұрын
Left handed drill bits (yes they are a thing) or a screw extractor would be your answer to the difficult pulley bolt.
@drivewaydiyer6504
@drivewaydiyer6504 7 жыл бұрын
I did a water pump on a VW Golf and it was welded to the block, I could feel your pain, when trying to get it off.
@iulianc9037
@iulianc9037 4 ай бұрын
Use vaseline silicon on gasket
@zedman442
@zedman442 7 жыл бұрын
Nice work, quick question if in the car, is can belt change possible with top engine mount in place or is this a removal job and prop engine up? Cheers
@miikatuukkanen-wy3kz
@miikatuukkanen-wy3kz Жыл бұрын
Kiristin käännetty väärään suuntaan löysätään myötäpäivään ja kiristetään vastapäivään ja kun kiristin laitetaan momenttiin joka kerta ehdottomasti lukitukset tulee olla irrotettuna ja kampiakselia tulee pyörittää 2-3 kierrosta myötäpäivään.
@strangeperson700
@strangeperson700 5 жыл бұрын
I love you so much!
@zorandrakulic
@zorandrakulic 5 жыл бұрын
Are there details in Haynes manuals for changing piston rings ? I am most concerned about torque setings and all. I am planing to work on mine Corsa C 2001, its 3 cylinder with z10xe engine.
@ZenebeworkAsmareTebeje
@ZenebeworkAsmareTebeje 3 ай бұрын
Thanks dear sharing
@omarlugo7305
@omarlugo7305 4 жыл бұрын
Tank you so much!
@RDLOR
@RDLOR 5 жыл бұрын
thanks for the torque specs
@tye595
@tye595 4 ай бұрын
probs best to turn the engine over while the cams are exposed, you can confirm then that it is all in time and you can also adjust the tensioner if it has slightly deviated from the "new" notch position which they sometimes do
@allikolabiogasexpert5501
@allikolabiogasexpert5501 Жыл бұрын
Hi , thanks for the video. I'm having serious problem with my Opel zafira timing belt. Pls what can I do to stop it from cutting all the time. Thanks
@pmanol1
@pmanol1 3 жыл бұрын
Thank you ❤️!
@ehhhh7
@ehhhh7 5 жыл бұрын
hi dear, it was great explanation. know I can change timing belt of my car with your help. but I can't find cam locking tool anywhere. I looked at ebay, aliexpress, but didn't find as it as. please help to find it.
@ziggy-nx4yw
@ziggy-nx4yw 8 жыл бұрын
great job very informative cheers
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
Thanks bud appreciate it :)
@samim1616
@samim1616 7 жыл бұрын
Ben bir uydurma selam yanlış olduğunu düşünüyorum
@samim1616
@samim1616 7 жыл бұрын
Ben uygun bir selamlama yanlış düşünüyorum
@danielp9721
@danielp9721 7 жыл бұрын
to say he dont konw anything about timming up hes got some nice tools and that timing tenstioner look used with marks all over it but good job nicely done
@gl5301
@gl5301 3 жыл бұрын
for anyone who watches this video and does the job on their engine, the tensioner bolts almost always round off. Mine rounded when i was tightening it, it never even got to 10nm - the stupid bolt head is just too shallow and soft. I also replaced with a 13mm head bolt, bought from the hardware shp, and its exactly the same length - so buy some beforehand. If your tensioner bolt rounds while undoing it, a cone cutter bit on a drill zaps the complete head off in about a minute flat.
@johnocallaghan9252
@johnocallaghan9252 6 жыл бұрын
Be carefull that the notch on the tensioner pulley is at the bottom of the hole on the engine block which James does correct here.This will give you the maximum play for the tensioner to move up and tighten. Iv seen a video on u tube where the notch is put in at the top of the hole and he had problems with tensioning the belt.
@ruijorgemoreno
@ruijorgemoreno 6 жыл бұрын
Is it okay to release the pulley's bolt as shown here w/ impact gun but without locking tools if the engine is not removed from the car?
@tonylitherland7830
@tonylitherland7830 5 жыл бұрын
Hi James, I know it's a long time ago but at 17.05 it looks like you have fitted the tensioner and removed it. If you fitted it incorrectly it would be useful in future to show mistakes to aid others. Not moaning you do great video's just may help in future.
@johnocallaghan9252
@johnocallaghan9252 7 жыл бұрын
Should the crank shaft be locked when doing this job ?Also is it recommended to use thread lock for the bolts ?
@murllymaturai752
@murllymaturai752 8 ай бұрын
Thanks for the sharing bro... I'm here malaysia... My car Chevrolet nabira same ingine
@loveandrespecttoall9980
@loveandrespecttoall9980 Жыл бұрын
Great job, it so annoying that one stubborn bolt can change everything
@peterdatechmen5506
@peterdatechmen5506 5 жыл бұрын
Someone has already replaced belt-tensioner has been setup and tensioned wrong -see allenkey tab should be approx 5 oclock when set, starting at 7 oclock!
@user-sf7kl9uh7k
@user-sf7kl9uh7k 2 ай бұрын
He set the pointer correctly
@johnocallaghan9252
@johnocallaghan9252 7 жыл бұрын
Is it a good idea to use blue loctight on all the bolts ?
@kiniakinia1000
@kiniakinia1000 8 ай бұрын
5:17 I used welder, just welded a nut and it came off easy.
@carslover3509
@carslover3509 8 жыл бұрын
great
@adrianhughes5693
@adrianhughes5693 5 жыл бұрын
did you repair the break on the timing cover you smashed with the malet ?
@Parknest
@Parknest 8 жыл бұрын
The timing belt isn't too difficult to change. When I did mine, I managed without the cam locking tool. I bought my belt from Autovaux which included the tensioner and pulleys. I didn't change the water pump but I'm going to do it at the next timing belt change. Although Vauxhall originally recommended 60,000 miles between belt changes, they should be changed every 40,000 miles. The new belt will be total peace of mind for the new owner.
@petermcclements6232
@petermcclements6232 5 жыл бұрын
not doing water pump big mistake ,,guess what will fail before you get it changed ,,,,yep water pump ..so called sealed for life rubbish
@johnocallaghan9252
@johnocallaghan9252 6 жыл бұрын
What stops the rollers and tensioner bolts from coming loose ?
@hanksgarage_
@hanksgarage_ 8 жыл бұрын
Doing timing belts are so fun lol never had to remove the motor to do one though
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
+hanksranger I didnt have to remove it, this is the new engine going in the project sri.. So made sense to do it before i put the engine in plus for filming purposes you can see much more! :)
@hanksgarage_
@hanksgarage_ 8 жыл бұрын
ya good idea, you replace anything else on it?
@TheSavageGarage
@TheSavageGarage 8 жыл бұрын
+hanksranger going to be doing the clutch kit, exhaust manifold (as its cracked) and then just a general service!
@Gym.pb03
@Gym.pb03 6 ай бұрын
@davidschutte9167
@davidschutte9167 2 жыл бұрын
Wat gebeurd er als je de stand gebruikt waar die op staat dus ditekt zelf streepjes zetten in de midden en dan vast zetten of kan dat niet
@Crawfa79
@Crawfa79 7 жыл бұрын
Very helpful video, viewers may want to confirm the torque values for those 3 water pump bolts, your 25nm recommendation may sheer the heads off? I suspect it's 8nm on the 1.8?
@Toddy220289
@Toddy220289 5 жыл бұрын
This happened to myself on my 1.8.....set the torque wrench to 25nm and im now left with a snapped bolt inside the block :(
Project SRI - Part #5 - Painting The Engine!
10:22
The Savage Garage
Рет қаралды 42 М.
Increíble final 😱
00:37
Juan De Dios Pantoja 2
Рет қаралды 112 МЛН
OMG😳 #tiktok #shorts #potapova_blog
00:58
Potapova_blog
Рет қаралды 4,1 МЛН
Неприятная Встреча На Мосту - Полярная звезда #shorts
00:59
Полярная звезда - Kuzey Yıldızı
Рет қаралды 7 МЛН
БОЛЬШОЙ ПЕТУШОК #shorts
00:21
Паша Осадчий
Рет қаралды 7 МЛН
OPEL VAUXHALL Timing belt Tensioner Installation and Adjustment.
9:24
МЕ FIXING EVERYTHING
Рет қаралды 1,8 М.
sincronización de Optra tapa amarilla año 2007 parte 2 engine 1.8
11:51
Electroauto Isays C.A.
Рет қаралды 219 М.
ГРМ ОПЕЛЬ ОМЕГА  x20XEV Zahnriemenwechsel
11:11
Виталий Рем
Рет қаралды 13 М.
Waterpump.wmv
8:57
Olgerd ez
Рет қаралды 166 М.
Zahnriemenwechsel
11:11
RBZ Technik
Рет қаралды 359 М.
[ES] Watch and Work - Opel Astra 1.8 16 V
6:40
Continental Aftermarket
Рет қаралды 105 М.
How to replace camshaft in OPEL ASTRA G 1.6 16V x16xel
37:57
Opel Astra G II Vauxhall Zrób To Sam Poradniki DIY
Рет қаралды 296 М.
TURBO Snail Race | Car edition
1:00
Delikwenth
Рет қаралды 3,1 МЛН
Lastiği arabaya koyamadı
0:30
Ömerinko
Рет қаралды 4,9 МЛН
Самое СЛОЖНОЕ оживление на канале!
52:54
Мастерская Синдиката
Рет қаралды 2,1 МЛН