Learn SketchUp in 30 Days DAY 11 - Spiral Stair!
Рет қаралды 16,824
Күн бұрынIn this video, learn to create a spiral stair model in SketchUp! This lesson will teach you to work with arcs and curves, rotational arrays, linear arrays, components, and extrusions!
DAY 12 VIDEO!
• Learn SketchUp in 30 D...
DOWNLOAD THE EXAMPLE MODELS
www.theSketchUpEssentials.com/...
30 DAYS TO BETTER SKETCHUP MODELS PLAYLIST
• LEARN SKETCHUP in 30 D...
HELP ME BEAT SKETCHUP!
• I called out SketchUp...
WANT TO LEARN SKETCHUP?
CHECK OUT THE SKETCHUP ESSENTIALS COURSE
www.thesketchupessentials.com/...
Disclaimers: all opinions are my own, sponsors are acknowledged. Product Links in the description are typically affiliate links that let you help support the channel at no extra cost.
TIMESTAMPS
0:00 - Introduction
0:10 - Getting Started
0:35 - Calculating Number of Risers
1:37 - Modeling your first riser
6:21 - Creating the Circular Copies
7:01 - Creating the vertical copies
7:51 - Making a spiral from these copies
9:05 - Adding vertical railing posts
10:52 - Creating the spiral rail
14:40 - Next video in series!
@Thesketchupessentials 2 жыл бұрын
Hi everyone! Let me know if you have any questions about the spiral stair in the comments below! :)
@seraphina3487 2 жыл бұрын
what about a double spiral staircase??
@RossMonks 2 жыл бұрын
These are terrific learning videos for sketch up. Thank you for making them it has jumpstarted my stalled learning curve!
@Thesketchupessentials 2 жыл бұрын
Awesome!
@user-tr3hi7sf4q Жыл бұрын
Very nice, thanks.
@basar2030 Жыл бұрын
Awesome
@davidalgham1011 5 ай бұрын
You are a genius
@tamarakepreyeomgbuayakimi.1379 Жыл бұрын
You're great in all this you do mate , 😂 nice one.
@KingBigBabyJesus Жыл бұрын
Was excited spiral stairs were in the tutorial as I was planning on building a set soon but low and behold go to look up the code for the area, banned since 2018. No fun I say. Great video tho, thanks
@kristinanovotnakova2974 10 ай бұрын
Hii, I have sketch up pro 2019 and I don’t have on the left side search button. I don’t see it in the help section neither. Or in my toolbars in View section :/ can you help me find it? AMAZING VIDEOS by the way!
@sandraforbes7495 Жыл бұрын
You know what would be awesome is if you had a visual of what sequence of keystrokes you use for each step. for instance: Click to highlight group,r rotate tool, click, control, click, *14 when copying stairs. Maybe I am too much a newbie but I get the concept but I find the sequence of keystrokes difficult.
@javedsaifi1086 2 жыл бұрын
Please make an clip for kitchen with v Ray and presentation for client
@braunihawk 13 күн бұрын
hey hey, im gonna stuck at the point where it comes to copy the stairs. evertime i type in this "*14" it just says wrong angle and does nothing. any adwise?
@pierre.a.larsen 2 жыл бұрын
Nearly 400,000 :-)
@Thesketchupessentials 2 жыл бұрын
Almost there!
@hansfritzmiller1846 2 жыл бұрын
I tried Grouping my Path, and then change the Axis to follow the diagonal along the Green Axis and the Red Axis being the perpendicular... same twisting result.
@Thesketchupessentials 2 жыл бұрын
I’m pretty sure in this case the issue isn’t the axes - it’s the mathematical function follow me uses to extrude the profile
@danielelse3914 2 жыл бұрын
Hmmmm. If the railing segments are identical, could you render them as components and then change their profile?
@Thesketchupessentials 2 жыл бұрын
Probably but you’d still have to fix the intersections manually
@kadirjilani5388 11 ай бұрын
11:15 One line in spiral rail is not following the path for some reason.. can't figure out what i did wrong 🤔
@salomejerezariza8064 Жыл бұрын
a
@harvantol8665 2 жыл бұрын
Why not make one step, then raise AND turn it in 1 time, and then repeat it?
@Thesketchupessentials 2 жыл бұрын
Because this method (at least to me) is faster. Honestly there's a method with the pro version and an extension called Memory Copy that I prefer, but since this is in the free version I didn't do it
RD Khan
Рет қаралды 793 М.
One More German
Рет қаралды 1,5 МЛН