Learn SketchUp in 30 Days DAY 8 - STAIR AND RAILING!

Рет қаралды 45,108

Күн бұрын

In this video, learn to model a Stair and Railing inside of SketchUp! This video will focus on concepts like using arrays and components, as well as some tips for adding your railing to your stairs!
DAY 9 VIDEO!
• Learn SketchUp in 30 D...
DOWNLOAD THE EXAMPLE MODELS
www.theSketchUpEssentials.com/...
MICHAEL BRIGHTMAN STAIRS VIDEO
• Stair Math Made Easy ...
30 DAYS TO BETTER SKETCHUP MODELS PLAYLIST
• LEARN SKETCHUP in 30 D...
HELP ME BEAT SKETCHUP!
• I called out SketchUp...
WANT TO LEARN SKETCHUP?
CHECK OUT THE SKETCHUP ESSENTIALS COURSE
www.thesketchupessentials.com/...
Disclaimers: all opinions are my own, sponsors are acknowledged. Product Links in the description are typically affiliate links that let you help support the channel at no extra cost.
TIMESTAMPS
0:00 - Introduction
0:14 - Figuring out vertical riser height
2:47 - Adding risers to your model
5:17 - Adding Steel Structure for Stairs - Plates
6:03 - Adding Steel Structure - tube
7:08 - Hiding tube edges
7:29 - Adding support to steps
9:32 - Cleaning up the end risers
10:53 - Railings - Posts
12:15 - Railings - Top Rail
13:10 - Top Rail Supports
14:24 - Adding cable railings
17:02 - Next video in series!

Пікірлер: 21

@Thesketchupessentials 2 жыл бұрын

Hi everyone! Let me know if you have any questions in the comments down below! Remember you can download the example files at www.theSketchUpEssentials.com/30Days

@MissingPage2 Жыл бұрын

Hi Justin, your videos rock - for both content and teaching quality. One comment on this lesson 8: I was a little confused when you refer to the stair treads as "risers" which are the vertical parts between the treads. Treads are the horizontal surfaces we step on. Is that what you meant? Thanks for all the great lessons and tips on using Sketchup!

@geraldmaschmann5576 Жыл бұрын

SAVE OFTEN! I got 3/4 of the way through when Sketchup crashed. Lost all my work 😪 I've found that going through the tutorials twice really helps, so not a real big loss.

@melissalaird2006 Жыл бұрын

Hey Justin I watched a video of yours from awhile back about figuring out stairs and this one is way easier! Thanks for the simplification.

@emmanuelyaghouti493 Жыл бұрын

Man you're the best and excellent.

@mikalshahi4861 Жыл бұрын

I really appreciate your useful videos. Amazing step by step tutorials for beginners like me.

@Thesketchupessentials Жыл бұрын

Happy to help!

@bknkhankins 11 ай бұрын

How are you zooming and moving around while also dragging and item? For example, you move the railing base from the bottom stair to the top tread while maneuvering your view. It seems like you are always using two hands at the same time. I'm using the mouse with my right hand and then clicking shortcuts on my keyboard with the left hand. What am I missing?

@danskipworth-michell7122 8 ай бұрын

Justin. You're my goto channel for Sketchup. Will you be doing a new series using Sketchup for iPad and iMac? There is no right click (that I know of) on an Apple mouse.

@aazad3760 Жыл бұрын

Well done 😍

@Thesketchupessentials Жыл бұрын

Thanks!

@AK69dj 5 ай бұрын

whats the first math with 12? what is the 12 standing for? like, you measure the height wich is 11,6 and the stair space is 7 3/4..

@bestebassist Жыл бұрын

Just a note, that Sketchup doesn't work properly on my (older)Mac in Safari. I switched to FireFox and it works fine.

@ritikchavhan2116 2 жыл бұрын

First like 😀

@Thesketchupessentials 2 жыл бұрын

Love it! :)

@nigelmendonca 2 жыл бұрын

For figuring out the spacing we could also draw a line depicting the total height and divide the line into equal riser heights

@Thesketchupessentials 2 жыл бұрын

That would work too - I did that with the spiral staircase video

@pdxwill8524 2 жыл бұрын

Just for clarity, in construction terminology the elements your are calling 'risers' are in fact called treads(that which one would tread upon). A riser a vertical piece that would be added to close in at the back between each tread to add strength to the assambly. Otherwise, Great job.

@stump182 Жыл бұрын

Yeah that bugged me. But I'm easily bugged.

@frank8102 11 ай бұрын

Good tutorial but two mistakes: 16.5' is not 16 feet 5 inches. And the cable shouldn't align with the top rail base, it should align with the second top one.