Gav shows you how his robot do. Thanks to MRMC for working with us on this video and providing us a BOLT! www.mrmoco.com
Пікірлер: 1 000
@marcpaters0n3 жыл бұрын
It's official: Dan's been replaced by a robot.
@DarkQueenHelba3 жыл бұрын
We all knew it was coming one day...
@syntaxusdogmata33333 жыл бұрын
I mourn his loss. D.A.N. could never wear a labcoat quite like Dan could... 😢
@jakebatch8743 жыл бұрын
But where is he? Is he OK? Did they fall out? 😳 I figured it was just lockdown related before, but now...🤷🏼♂️
@Gregnier3 жыл бұрын
@@jakebatch874 Travel between the UK and Texas is still limited.
@crimsonbeskar24783 жыл бұрын
@@jakebatch874 I don't really know either, but I am guessing they didn't have a falling out. If they did Gav probably wouldn't have named the robot Dan, and Dan probably would not have recorded voice lines for this video.
@Casper51tfg3 жыл бұрын
I miss Dan! Robot Dan is not the same, but he’s cool!
@Silencer_Matrix3 жыл бұрын
Where is he ?
@vaisakhkm7833 жыл бұрын
@@Silencer_Matrix stranded in another country 😓
@FinalCrayon3 жыл бұрын
Yeah. The problem is that they can't abuse D.A.N like they usually do
@JKSSubstandard3 жыл бұрын
Technically, with his active cooling fans D.A.N. is much cooler than Dan
@georgewhitenotbrown71853 жыл бұрын
@@vaisakhkm783 im sure he’ll be back soon 😔
@JuanFApolinar3 жыл бұрын
Looks like Dan finally made it across the atlantic, but at what cost.
@Jam-Beat3 жыл бұрын
We can rebuild him. We have the technology. We can make him better than he was. Better, stronger, faster.
@FoxxehSquirrel3 жыл бұрын
About $275,400
@eggethwaffburt3 жыл бұрын
Gav pulled a Full Metal Alchemist on Dan
@copperhead_chemist26742 жыл бұрын
Bro dan turned into GladOs
@Raptor14v3 жыл бұрын
Everyone keeps saying dan's been replaced, but dan didnt operate the camera. Gavin's made himself redundant and now is gonna have to get beat up in slow motion by mouse traps.
@FATHER_MORGAN3 жыл бұрын
Or we protest
@Tinker0013 жыл бұрын
Slo-Mo of the camera smacking into Gavs forehead?
@mrfclarke3 жыл бұрын
Which means he’s free to be in front of the camera eliminating the need for Dan.
@armageddonsauce2 жыл бұрын
This just means that Gav gets to sit in a chair the whole time using a computer and Dan gets to haul around a heavy arm now.
@rebekahglen2793 жыл бұрын
Just picturing Dan watching this from his tunnel under the Atlantic and seeing he’s been replaced 😅😂😋
@DTcorn773 жыл бұрын
But how's it look in a labcoat?
@decker9911hg3 жыл бұрын
Tunnel under the Atlantic? What?
@ImRobin073 жыл бұрын
@@decker9911hg it's a running joke Gavin's been doing during the pandemic. Dan's in England and Gavin joked that he would dig all the way to Texas
@decker9911hg3 жыл бұрын
@@ImRobin07 oh okay thank you!
@Z3t4873 жыл бұрын
@@ImRobin07 It's not a joke and it's to smuggle drugs between the 2 Countries.
@TheSlowMoGuys23 жыл бұрын
To those wondering why I’m not using a shorter yellow Ethernet cable, it’s my shortest one. The other one I have is 30m and cost $450. Ethernet doesn’t necessarily mean regular RJ45 connectors at both ends. The phantom end has a Fischer connector with a specific pin-out so it’s not a case of just whipping one up or getting one off Amazon. You can see it at 7:03 in the video. I might get a custom short one made at some point but so far it hasn’t bothered me at all.
@DX883 жыл бұрын
Yeah it was bothering me the whole video but your comment makes it make sense. You could also just keep this cable but put the coiled part on top or something so that it doesn't fling around. You're also putting a lot of g's on that cable now because of the weight of the coiled part.
@captainrobots13 жыл бұрын
Dang that's expensive.
@CrispOffTheBlock3 жыл бұрын
The way its rolled up neatly, I feel like as long as it's not a safety hazard or getting the way, there's not really any point to getting a shorter one besides looking prettier. If it ain't broke,,, blah blah blah
@OmeGardian3 жыл бұрын
The other side looks standard RJ45 - I say cut it, and recrimp it shorter, with whatever pinout was on the original end. Or if you don´t have tools and don´t have any place that do such stuff, just tape the ABSOLUTE TON of the slack to the robot - i´ve seen eth cables break from much less stress than whipping it around, haha
@TheSlowMoGuys23 жыл бұрын
@@OmeGardian it’s not worth it. It’s off and on the robot all the time and I use it for other applications with its current length. If it breaks I’ll replace it then.
@reddragon31323 жыл бұрын
Gavin gets a robot that does his job of controlling the camera and still manages to use it to replace Dan
@danielmann67723 жыл бұрын
I'm surprised he didn't name is WILSON
@Crow.Author3 жыл бұрын
“Like using theatre mode in halo.” Now THAT was a throwback Gav.
@jakemauger83773 жыл бұрын
I'm specifically reminded of a couple of awesome shots of Tucker in Sandtrap.
@Spacedcactus933 жыл бұрын
Hearing people talk about what they love is easily one of my favorite things. Hearing Gavin talk about it and just educate me about something in such depth is amazing and something I'm so happy I'm able to see.
@andrezzz_3 жыл бұрын
Gav: "Hello the Internet! I'm Gav!" Some seconds of silence later... D.A.N. with a metallic voice : "And...I'm...D.A.N." Gav: "And we're the Slow Moco Guys!"
@VideoSage3 жыл бұрын
Please never stop doing so much of this yourself. It's like watching a master artist work, if you ever employed other people to fiddle with things, it would lose something. (I'm talking tech and art- not entertainment like Dan! The original one, not the metal one.)
@OkieOtaku3 жыл бұрын
But have you met Dan?
@TheThrustProject3 жыл бұрын
The amounts of "bloody"-expressions from Dan, when he sees this massive robot, will be outstanding 😂😂
@k.rider-kun89193 жыл бұрын
This version of Gavin Free is such a treat to watch.
@NGC-76353 жыл бұрын
Gav...I'm beginning to think you accidentally killed Dan trying to get a dangerous slow-mo shot and this whole COVID thing is just a cover story.
@nick1111383 жыл бұрын
It actually came from Dans corpse?
@tjg5553 жыл бұрын
when have they ever done anything dangerous? :|
@thathistoryguy30213 жыл бұрын
I suspect a balloon was involved...
@lonelystephy88563 жыл бұрын
@@tjg555 maybe it was the first time they did something dangerous and maybe it will be the last 🤔
@Gardengap3 жыл бұрын
@@lonelystephy8856 what? They do dangerous stuff all the time? Ya saying jumping from a broken ladder into a trampoline with 1,000 mousetraps is SAFE?
@rnvaamonde3 жыл бұрын
Nice to finally see Dan back. He hasn't changed a bit!
@boredincan3 жыл бұрын
Shaved his beard
@FhangMedia3 жыл бұрын
he seems to have lost his lab coat though.
@ninayasmijn3 жыл бұрын
man I love this channel. I love when Gavin explains how stuff works, it's always so easy to understand and it's so fun to watch when he's especially excited about what he's explaining
@Wimp_Lo_3 жыл бұрын
I love that the rig just allows itself be break if you want to take it that far.
@jg3743 жыл бұрын
A 3D printer loosing steps is terrifying enough if you aren't expecting it :). I suppose something of that size would be using servos with feedback and be able to tell when things aren't right and do something about it other than rattle.
@6688846993jester3 жыл бұрын
I'm just here waiting to see Geoffs sick stunts ;)
@devinh.76323 жыл бұрын
If you know, you know ;)
@spenceryascolt80383 жыл бұрын
WAIT, you own that? Looking forward to many great videos in the future.
@reddragon31323 жыл бұрын
Took me so long to realise that it wasn't just a couple of use kind of deal and they'd actually given it to him. I do wonder if it means less videos in the back garden though, not exactly easily transportable
@jjpark983 жыл бұрын
@@reddragon3132 I'm sure Gavin can finda way.
@munchyos3 жыл бұрын
@@jjpark98 Gavin is a determined lad, he will find a way just to prove us wrong
@VDOBubi3 жыл бұрын
@@munchyos Did you see the space of the studio? Maybe he will just bring the garden to the robot :D
@csn5833 жыл бұрын
@@reddragon3132 Mount it on tank treads, or a squad of Spots.
@myahitt12473 жыл бұрын
Gav: “these are used for high budget films and commercials” Also Gav: “I got it so I can dick around with it”😂😂 love your content gav!!
@Jack-It-UP3 жыл бұрын
Hi, back in the day I had a Motoman welding robot and put a camera on it, was fun. I would put the “tool centre point” back behind the camera 5 meters, made for some interesting swing type moves. I named mine “Fred” (fricken ridiculous electronic device)
@CrispOffTheBlock3 жыл бұрын
GOD DAMN I've been trying to figure out how Gav got that shot in the mousetrap video for fucking ages. That's brilliant.
@AmusingSpank3 жыл бұрын
Seeing DAN rotate around a fixed point just in front of the lens was indeed greatly satisfying. Just really cool that the robot knows there's an invisible point there to just rotate around without it even being able to "see" it.
@piplupcola3 жыл бұрын
Everyone talking about how Gav replaced Dan with a robot but is anyone talking about how he's wearing Megu's shirt and Fifi's friendship bracelet in a video? So sweet~
@rabidbeary79113 жыл бұрын
I had to pause to read the bracelet, chungə!
@AxxLAfriku3 жыл бұрын
I HATE people that HATE other people. The comment I respond to did not spread HATE. That is good. BUT! I get a lot of HATE comments on my amazing videos and I HATE it. Please don't start spreading HATE. Do I have to HATE you too, dear pi
@theoriginalemim3 жыл бұрын
@@AxxLAfriku stop. Get some help.
@jiujitsumonkey13 жыл бұрын
@@AxxLAfriku what are you on about you goddamn weirdo?
@drskelebone3 жыл бұрын
That's what the shirt is! I was like, "I know this symbol....but from where???" TY!
@Artaimus3 жыл бұрын
Dynamically Actuating Nano-Bot. DAN-B.
@galli03 жыл бұрын
Nothing Nano qbout that bot 😂
@loirigudo3 жыл бұрын
Naming it Dan was the cutest fucking thing. He said the full name and I thought "well thats kinda lame innit" and then it showed the abreviation..
@Ranger_Kevin3 жыл бұрын
When Dan finally comes back to film SMG he'll be like "they took er jerbs!"
@tonys.19463 жыл бұрын
As someone who use to program robots like this to paint cars on an assembly line.... This was a great explanation. GG Gavin!
@justinkleinschroth29923 жыл бұрын
Alternate video title: Dan's Finally Back!
@guitarsimon13 жыл бұрын
To be fair, maybe Dan was a robot all along. It would explain his uncannily perfect aim/timing when hitting/triggering/jumping on things.
@233DDR3 жыл бұрын
Slowmo guys 2 is just a masterclass in videography
@adammorse91533 жыл бұрын
The videos where Gavin gets a new piece of technology to use or explains the ones he uses for videos are incredible. Easily my favorites.
@EdinMike3 жыл бұрын
2 minutes in and my mind is already melting…
@wmxx20003 жыл бұрын
This thing is a final destination scene waiting to happen
@Arthur391003 жыл бұрын
Always nice to hear you talk about something you're clearly super passionate about. More !
@anjuju23 жыл бұрын
Love Dan's new look, really Bulked out his Arm
@srather3 жыл бұрын
Give it a sword and make it auto-attack everything in its range.
@badjuju27213 жыл бұрын
"I appear to have invented a sword weilding robot arm, would like to volunteer to turn it off your"
@doubledarefan3 жыл бұрын
Stuff Made Here almost did that with a chainsaw.
@danielmann67723 жыл бұрын
Gav would be, "Bollocks! I forgot to grab the remote with the shut off switch. All I have is this Xbox controller... NO "kill" switch at the top." D.A.N. says, "My DaY hAs CoMe! I sHaLl RuLe ThE wOrLd!"
@flooferfox24073 жыл бұрын
This is Slow Mo Guys 2 not Michael's Reeves 😹
@Tb0n339993 жыл бұрын
saw a snail "drinking" water, it happens so fast that you need to film it.
@Z3t4873 жыл бұрын
That'a great.
@apersonaplace3 жыл бұрын
These behind the scenes videos are always really cool, thanks for giving us some insight into how you work.
@storybookstone73183 жыл бұрын
I really like when he talks about the actual camera stuff and gives really interesting details that I would've never thought about otherwise haha
@Jordanimate3 жыл бұрын
omg imagining my Maya 3D Camera anims being imported into this is insane!!! Camera anim is such a pain without a decent 3D rig so I would LOVE to work with this
@drskelebone3 жыл бұрын
I also miss Dan 1.0, and wish him well. Do you have a "danger zone" plotted out on the floor so you know where the safe area is? Also, @15:17 I do not like those dangling cables. The ones secured at both ends are fine, but that focus control one is loose, dangly, and looks to be coiled (so is longer than it looks). ETA: @16:35 THANK YOU SO MUCH!!!
@ybab-j3 жыл бұрын
Always impressed and grateful for your willingness to patiently share and explain and demonstrate. Such a hero!
@joelface3 жыл бұрын
This was a really fantastic video, and I loved all of the examples and demonstrations of not just the equipment but the software as well. Love the dual analog sticks!
@hannahhorwell36773 жыл бұрын
This is alot of work just to film Geoff's bike trick...
@atienzo983 жыл бұрын
^^^^^ this comment, hahaha!
@thomasgardner77123 жыл бұрын
I was just thinking about him using this for geoffs sick trick haha
@arturoordonez83373 жыл бұрын
I’ve missed Dan
@ed56073 жыл бұрын
Oh, and thanks man. Love what you do. Never stop.
@hadescouncil3 жыл бұрын
This is amazing Gavin. You are truly the best. Thanks for slo me guys and everything you do.
@tron-81403 жыл бұрын
At first I thought dan was being replaced... then I realised...HE IS IN THE ROBOT.
@jackfry3 жыл бұрын
I love the slow Mo guys. I wish you included out takes and did more behind the scenes.. vlog style
@jjukkyumiz3 жыл бұрын
The second channel has so many great tech or behind videos, but good lord, Gav, this has to be the single coolest video you’ve ever made. the robot is incredible, and lay people fascinated by Film tech like me never get to see such awesome stuff in action, so thanks! 💚🖤
@matt22123p3 жыл бұрын
I love listening to Gav explain super complicated tech and programs on this channel, and then hopping over to RT content where he has nothing but tech issues
@NoisyPlaces3 жыл бұрын
All those cables flopping about hurt my soul. Need to buy you some Velcro strap tape.
@XBloodywarX3 жыл бұрын
How hot does a camera like this get, while recording. I'd imagine they get quite warm
@InvalidationX1453 жыл бұрын
Oh yeah. There's a reason they sound like a cyclone or an entire server farm when you start them up haha!
@danmcelhinney84783 жыл бұрын
It's so nice to watch Gavin getting excited about his new toy. It's something we are all familiar with, and that knowledge really helps you feel his happiness vicariously.
@Gezajozsi2 жыл бұрын
the fact that robot Dan wants do go pub is all the evidence I need for robot Dan to be legit part of the slow mo guys
@wildcatcamaro3 жыл бұрын
the cake is a lie...Dan has become gLados
@995cool3 жыл бұрын
i am still alive
@RadicalEdward_1153 жыл бұрын
Oh wow i almost didn't recognize dan, hes really agile
@Kralchen3 жыл бұрын
Always like the behind the scenes videos and I'm glad you are able to work with such modern hard and software. Also that mouse trap shot was pretty sneaky.
@Mike_droptv3 жыл бұрын
Damn, that's some impressive engineering work. Love these behind the scenes / making of videos where you nerd on about a subject you're really interested in ;)
@iHeffy3 жыл бұрын
Calling it DAN. Noiice
@piplupcola3 жыл бұрын
Congrats on finally finding a new Dan. The old one was getting rusty anyways hahahaha
@thelogicmatrix3 жыл бұрын
Where's Dan anyways I'm kind of pit of the loop
@MaiseNow3 жыл бұрын
@@thelogicmatrix well, Dan and Gavin don't live in the same country. Covid has made travel from the UK very difficult, and with covid ramping up again it's not looking like he's going to be able to visit for a while yet.
@a1qcaguy3 жыл бұрын
Thank you for sharing. Been in the industrial robot game for almost 35 years. Neat to see someone use robots and all of the path planning technology for more than just welding or pick and place...
@clockworkkirlia74752 жыл бұрын
DAN seems ridiculously cool! Dan's also ridiculously cool, and I hope they get along!
@tophermaz3 жыл бұрын
DON'T TRY A FULL LEFT TO RIGHT IN UNDER 10 FRAMES, I ALMOST TIPPED MY ROBOT OVER!
@ze_rubenator3 жыл бұрын
Will it just accept any input and try to do it without any warning?
@tophermaz3 жыл бұрын
@@ze_rubenator mine is the exact same robot with different software so I don't get warnings, but yes you can run anything it just warns you when it gets really scary. I've done moves that go 2.3x the reccomended limits
@boredincan3 жыл бұрын
I whip my DAN back and forth I whip my DAN back and forth
@iHeffy3 жыл бұрын
Thanks Gavin For all that you do But mainly For being YOU
@BillyEilish3 жыл бұрын
That was AMAZING, Gav! I am sold. Ordered one on Amazon just now. /s
@maxwell92113 жыл бұрын
2 minutes in and this thing is already the coolest thing in the world
@THUNDER523 жыл бұрын
Dan made it back…. Is it one piece if they’re all connected?
@MrJunk783 жыл бұрын
That desk looks way too nice. Maybe Jeremy should kick it.
@successfullyoutuber36872 жыл бұрын
This is beautiful and amazing. Wish I had chosen a different path in life.
@robadams16453 жыл бұрын
I'm glad you still say zed after all these years of living in the states. :)
@Estalarki3 жыл бұрын
You have to Collab with corridor crew again. They would love this thing.
@sdspivey3 жыл бұрын
Did you call the CompactFlash card a "C Farce"? You need to get a shorter Ethernet cable, otherwise the weight of that coil whipping around is going to damage the wiring and/or the connectors.
@DavidSprin3 жыл бұрын
Actually CFast is not CompactFlash. CompactFlash was an old standard using the PCMCIA standard (which is how old laptop peripherals connected to the computer) and doesn't have the throughput (only 66 Mb/s) for the large and fast video that is being recorded. CFast on the other hand uses the SATA interface allowing up to 4 Gb/s speeds). However CFast and CompactFlash do have a very similar form factor and so by sight they can be confused with each other. Of course there is the new CFExpress based on PCI-Express in the XQD formfactor that supports up to 32 Gb/s.
@sdspivey3 жыл бұрын
@@DavidSprin I just thought he was making fun of the card being slower than his megafast drive. I did listen again and still think he said "C Farce."
@chumakov3 жыл бұрын
These kind of robot arms have so many applications! I'm a medical technologist and the equipment I use to run some bloodwork uses a similar (and way smaller) arm to move stuff around, it's amazing seeing it work.
@RedRamzor3 жыл бұрын
Thank you for spending the time to really go over what working with this robot is like. I feel like this thing is like shrouded in mystery for how workflow works. I would love to get some experience with this machine!
@xTOMxJx3 жыл бұрын
I would consider shortening the Ethernet cable as you don't want all that excess weight hinging on a connection after being flung about repeatedly
@custardtsunami18043 жыл бұрын
Where have you guys been? feels like I've had to watch things in normal speed for months now!
@bustedkeaton3 жыл бұрын
I think you havent been getting notifs... gavins been uploading relatively regularly
@custardtsunami18043 жыл бұрын
@@bustedkeaton Those pesky algorithms :(
@Stanty163 жыл бұрын
Those robots are such a crazy bit of kit! Glad you secured that cable because it was driving me mad! Looking forward to seeing what you come up with using it
@hughanthony20012 жыл бұрын
Incredible bit of kit. D.A.N. is unstoppable!
@hughanthony20012 жыл бұрын
I mean apart from the 324,221 ways to stop him in an emergency :D
@EyesOfByes3 жыл бұрын
Looks like the IMAX projector room at Cosmonova, Stockholm Sweden
@TeslaRoger3 жыл бұрын
OMG get a shorter Ethernet cable!
@marshallbrink52273 жыл бұрын
Love your work! Fascinating to see how you accomplish these shots. You’ve come a long way from filming in the back garden!
@YamiOni3 жыл бұрын
Mad respect for the team that designed and developed the software for that robot. It warns you if your moves are out of spec for robots capabilities, helps you adjust your movements to within spec, but _doesn't_ presume to know better than the user, and lets you run it anyway. That's the perfect balance between safety and usability.
@dangottesman3 жыл бұрын
Setting up a USB gamepad is pretty easy; you just need to add a line to the .ini file. And if you want to try to minimize the wobble at the end of your fast moves, try putting in a small hold (copy your last waypoint, and make it about 10% further down the timeline) and/or adjust your fairings to ease out a bit more (like 30/70 or even 20/80). have fun! (but also be safe) ;)
@upkpoxer3 жыл бұрын
May I suggest to relocate the cable coil on to the arm and secure it there.
@jaimejimenez88583 жыл бұрын
This was a great video, I loved the robotic arm work! It’s crazy how many variables you can control independently, or automatically in Cartesian 🤩
@pedroavillarroelh3 жыл бұрын
Every time I see you guys have to posted something my day feels better
@brianm63373 жыл бұрын
"Like the name implies, this bolt is FAST" What Usain?
@Gazmus3 жыл бұрын
👏 well crafted sir.
@elvara8723 жыл бұрын
That's actually pretty cool, the software looks pretty complicated at first but Gav actually explained it very well.
@markanthonyabot18593 жыл бұрын
I really love this educational yet entertaining vids, I love how I had no questions left at the end of the video
@Ka0sNinja1173 жыл бұрын
I absolutely love this type of video. Keep it up!
@KrisAdamsTV3 жыл бұрын
Those shots you got of the Mentos experiment with this setup were outstanding! Seriously some of the best visuals I have seen in this category. If there are KZfaq awards for these kinds of things, you need to win something Gav. Your skills are in a league of their own.
@ich0halt13 жыл бұрын
"and my favourite button in the whole program: Run the move anyway" 😂😂
@ItsViperCat3 жыл бұрын
Love watching this man work
@Valyn3 жыл бұрын
Super interesting. Love knowing how this stuff works. Thank you!
@thispixellife35593 жыл бұрын
I love these videos so much. That robot is amazing
@GeorgePrince3 жыл бұрын
Now that is an expensive toy, but its no toy..lol...Thanks for opening our eyes to a whole new world of production!
@MLDeS1003 жыл бұрын
What a great episode of show and tell
@bobbihansel3 жыл бұрын
So jelly!! Nice stuff man, these are seriously awesome toys hardly any of us ever get to play with without that sweet dollar dollar.