Homebrew Bandpass Filters for Ham Radio

Рет қаралды 6,492

Күн бұрын

In this video, we show how I build a bandpass filter for the 20m ham radio band. Sponsored by www.pcbway.com Cheap & quick PCB, 3D Printing, CNC machining, and fabrication services from PCBWay.
👍Join this channel:
/ @thesmokinape
👍Support TheSmokinApe Channel on Patreon Here: / thesmokinape
🔥🔥🔥 Get your Ham Radio License using Ham Radio Prep:
shareasale.com/r.cfm?b=125420...
USE CODE "SmokinApe" for 20% OFF
Links to products in the video:
👍NanoVNA: amz.run/5gpY
👍TinySA Ultra AURSINC: www.amazon.com/dp/B0BMPSSFTK/...
👍UCTRONICS LC Inductor Capacitor Tester: amz.run/5gpe
👍www.amazon.com/shop/TheSmokinApe
As an Amazon Associate, I earn from qualifying purchases.
📺Tuning Inductors for Ham Radio: • Tuning Inductors for H...
📺 • DIY 20 Meter Bandpass ...
🔗Bandpass Filter Article: www.arrl.org/files/file/Techn...
If you liked this video you can see more like it here:
👍 / thesmokinape
You can also follow me on Twitter and Instagram:
👍 / thesmokinape
👍 / thesmokinape

Пікірлер: 70

@HOAHamRadio 8 ай бұрын

Where do I log my CE credits, and when do I get my certificate of completion? You demonstrate for us all, we have a lifetime of learning / accomplishment / enjoyment ahead of us. Thanks Ape!

@TheSmokinApe 8 ай бұрын

Hey Bob, thanks for checking out the video bro! Wen you making one?

@HOAHamRadio 8 ай бұрын

@@TheSmokinApe Ah, um, well, hmmmm; I think I need to learn how to use my Tiny SA first. I'm getting closer; may hook the Tidradio H8 up to it and give it a go.

@KK6USYHamRadioAdventures 8 ай бұрын

Nice build Ape, we need to look deeper into these!

@TheSmokinApe 8 ай бұрын

Thanks Chuck and yes we do 👍

@jameshall5835 4 ай бұрын

I plan on doing this filter in a slightly different way. I’m going to try Manhattan style construction using small islands (min capacitance) and have an uninterrupted ground plane. It will be mounted with metal standoffs to make the box continuous with the GP - eliminates the need for a separate ground strap from the connectors. As POTA becomes more popular, multi-op is inevitable. So trying to stay ahead of this ! I recently repaired a couple BPF’s after a major RTTY contest. These are Chebyshev type however. Always sumthin’ ! 73 Jamie WB4YDL❤

@TheSmokinApe 4 ай бұрын

He James, I actually have a new filter in the works. The video should be out soon. Sounds like to have a cool project planned, best of luck with it 👍

@jameshall5835 3 ай бұрын

It came out well - be glad to share it. The videos are long because it’s blow by blow walkthrough. I have Parts 1 & 2 in my Dropbox. The spec an shows it dead on first try !

@Bill-HRT 8 ай бұрын

Thanks Ape! I love this kind of project. You just plain talked the confusion out of the articles I see. 73 de Bill

@TheSmokinApe 8 ай бұрын

Thanks Bill, I appreciate you checking it out 👍

@KS0JD 8 ай бұрын

Nice build Ape! The trick to any RF work is short leads and good ground plane. The higher the freq the closer the components are together. I think you will see a change in the performance if you use a copper clad pcb. You could probably have PCB way build you one pcb that would work for all the filters. For best results would be to do a active model of the board with a filter. Don't know if PCB way has modeling software for this. Tools like Mathlab or Spice come to mind but it has been a few years since I did any of that. They have probably all changed. Good luck! 73

@TheSmokinApe 8 ай бұрын

Thanks man. I do think the GP on this one was a little janky leading to the goofiness on the lower side. I'm thinking about getting a board from PCBway for future videos.

@youtubeaccount931 8 ай бұрын

Nice caps! Always on the lookout for those

@TheSmokinApe 8 ай бұрын

They are a bugger to find

@Ezzell_ 8 ай бұрын

Great video...no fluff....under 10 mins....nice.

@TheSmokinApe 8 ай бұрын

Thanks Ken 👍

@robertmeyer4744 8 ай бұрын

great build ! very handy to have. no need to run an amp threw it. the output section in a amp has a filter. you want this on radio side to help with receive. strong signals out of band can over load the RX . also can really help with out of band noise. 73's

@TheSmokinApe 8 ай бұрын

Right, it's more important on RX. Thanks for watching Robert 👍

@jameski5oeb668 8 ай бұрын

Thanks for putting this out there!

@TheSmokinApe 8 ай бұрын

Thanks for watching James 👍

@MikeN2MAK 8 ай бұрын

Some of this is a little above me or intimidating, but I could make use of some bandpass filters. Thanks for another good one. This could be helpful for me down the road.

@TheSmokinApe 8 ай бұрын

Thanks for checking it out Mike 👍

@tomstrum6259 5 ай бұрын

For Any effective RF filter, Using a too Small Enclosure with components (Especially Inductors) jammed up Close despite core Orientation is asking for Needless coil to coil inductive Cross-Talk & undesirable signal Leakage Coulping....It's just HF but Using a Large enough Enclosure with Isolating Each filter "Pole LC pair" components into RF Shielded partitions can get results Closer to the Model specs...

@TheSmokinApe 5 ай бұрын

Hey Tom, the design I followed called for the use of this enclosure but I don't disagree.

@temporarilyoffline 8 ай бұрын

Always improving!

@TheSmokinApe 8 ай бұрын

I gotta figure out a pcb design to make this easier

@JayN4GO 8 ай бұрын

Well done

@TheSmokinApe 8 ай бұрын

Thanks Jay 👍

@Thump2030 8 ай бұрын

Good video Ape

@TheSmokinApe 8 ай бұрын

Thanks Thump 👍

@thuff3207 8 ай бұрын

Nice job of building a filter. I would suggest watching your phase if you use this on digital transmission.

@TheSmokinApe 8 ай бұрын

Thanks for the heads up Thuff 👍

@DutchmanRadio 8 ай бұрын

This is epic!

@TheSmokinApe 8 ай бұрын

Thanks RO 👍

@kevinkc3onohelijeepworld953 8 ай бұрын

Nice filter ape 🫡

@TheSmokinApe 8 ай бұрын

Thanks Kevin!

@JT-py9lv 8 ай бұрын

Thanks Ape... I'm on the hunt for Type 6 toe-roids now. I've found some T200's... Humm ??? With some 14awg magnet wire.

@TheSmokinApe 8 ай бұрын

I think I got these off Amazon 👍

@FEPLabsRadio 8 ай бұрын

Damn fine job, son!

@TheSmokinApe 8 ай бұрын

Thanks FEP 🍻

@mstover2809 8 ай бұрын

In Figure 4 (The chart for the 5 pole filter) the input and output values are the same, whereas the L3 inductor is 1/2 L1 and C3 is 2x C1. DLd the .pdf to see it for myself and checked the 5-pole filter in Fig 4.

@TheSmokinApe 8 ай бұрын

Thanks man 👍

@Frank_K4FMH 8 ай бұрын

Good followup! Note, again, how Gordon mounted the toroids at explicit right angles to one another! You might re-jigger yours and re-sweep. The lower skirt might improve. 73 de K4FMH

@digitalradiohacker 8 ай бұрын

I've had minor cross-talk between transformers mounted on a PCB before. Turning one of them 90deg from the other totally eliminated the problem.

@Frank_K4FMH 8 ай бұрын

Roger! Note too the original QST article figure: they are shown at right angles to one another. The author didn’t explicitly mention this, as I recall.

@TheSmokinApe 8 ай бұрын

I’ll mess with it a bit, thanks for the heads up

@Frank_K4FMH 8 ай бұрын

@@TheSmokinApeIF this adjustment does improve the skirts, it would make a great and informative video for other builders to illustrate how the physical isolation by making the toroids at right angles helps. $0.02

@TheSmokinApe 8 ай бұрын

👍

@Swamp-Fox 8 ай бұрын

Is the power handling capability determined by the core size, magnet wire diameter, and voltage rating on the silver mica caps? How about a Chebyshev vs Butterworth comparison for a future video. Great stuff!

@TheSmokinApe 8 ай бұрын

To answer the question, I'm going to say "yes". I do believe all of those things play a factor. I do expect to be playing around with these filters more in the future so maybe I can add the other design. Thanks SF 👍

@tomstrum6259 5 ай бұрын

Maybe you help me with BP filter builds....I've used regular Diy 16 ga Air core Inductors + Mica caps in Partitioned-Off Enclosures for all my Hf Filters with No issues....The relatively Large gauge enameled Wire is so Easy to cut & Squish or Push turns together to Precisely Tune filter sweep Characteristics......Why use the messy & Questionable Toroidal core inductors when Air core work Fine ??

@TheSmokinApe 5 ай бұрын

It's my understanding the air cores are more subject to leaking and require shielded separation. While I'm sure its still in issue on toroid wrapped cores it's less of an issue.

@germanjohn5626 8 ай бұрын

3db loss means you lose 1/2 of your power, good luck running any power through it. It will burn up in a flash with 100w and 50w of it turn into heat. Touch a 50w solder iron and see how hot it is.

@technishn 8 ай бұрын

It looks a bit strange on the LF side? Does an Elsie filter simulation show that?

@TheSmokinApe 8 ай бұрын

I didn’t model it, I was thinking the cores were bleeding over or it was my janky ground plane 👍

@technishn 8 ай бұрын

@@TheSmokinApe I modeled it using Elsie, and it it didnt show any LF aberration, so probably the meandering ground. I buy 5 x 7 cm double sided copperclad PCB.

@TheSmokinApe 8 ай бұрын

I used the copper PCB on the first version, I was just "prototyping" the components in this video for experience. I expect that I will do more BPF videos in the future... thanks as always for the comments 👍

@DonzLockz 7 ай бұрын

I would only need to build one if the radio didn't already have one onboard, right?

@TheSmokinApe 7 ай бұрын

People will use them in addition to the built in BPFs if they are operating in an RF rich environment where they get interference. The prime example would be Field Day when there are other hams operating close by 👍

@DonzLockz 7 ай бұрын

@@TheSmokinApe oh damn, I didn't know it could be that bad. Great info Master Ape!👍😁

@TheSmokinApe 7 ай бұрын

Thanks for watching Don

@ZeroHarry 8 ай бұрын

My opinion, your original one looks more better to me, maybe just a little more heat on the joints to get better flow.

@TheSmokinApe 8 ай бұрын

Thanks Zero 👍

@don_n5skt 8 ай бұрын

When you say 100W capacity, is that 100W FT8?Also, where in the chart can we find 12m and 30m ;)

@jamess1787 8 ай бұрын

Last comment got nuked. Online calcs are our friends. Nice thing about the community: lots of brilliant minds who put all the hard work in for the rest of us to benefit from. 🤜🤛

@TheSmokinApe 8 ай бұрын

It might do it for FT8 but I'm sure the designer was using ssb. I don't have a chart for 30/12 yet... lol

@LeeMcc_KI5YPR 8 ай бұрын

Pretty sure its not 500kV? That would arc a few feet. Is there a video? 🤣 Regarding the unbalanced filter plot, I suspect one of the inductors has a parasitic property due to difference in windings.

@TheSmokinApe 8 ай бұрын

Yeah, the 500kv surprised me. I do think you are right about the cores or it might be my janky ground plane 👍