In this video I show how I set up and fit the first section of a winder stair set.
Пікірлер: 111
@cabottaxi Жыл бұрын
Top man showing your skills at the highest level.
@thetallcarpenter Жыл бұрын
Appreciate you watching and your very kind comments🤗Cheers Del
@mlawlan69 Жыл бұрын
A tradesman at the absolute upper echelons of their game, it's a pleasure to watch and learn.
@thetallcarpenter Жыл бұрын
Hi there🖐Your comment is very kind🤗and have many years of experience which goes a long way😎Cheers Del
@garrymetcalfe5914 Жыл бұрын
It's great to watch how another joiner works as we all do things slightly differently but get the same results. Keep up the great work Del👍🏼
@thetallcarpenter Жыл бұрын
That's the magic of our wonderful trade Garry👊Plenty of different ways of getting the same results👍Thanks for your comment 😎 Cheers Del
@amazing451 Жыл бұрын
It's great to see you back Del been missing you of late, good point you made at 16min on the video about the riser and tread being square, often had problems with newels not been plumb even if the shoulders of the tenon were tight. Look forward to part 2.👍👍
@thetallcarpenter Жыл бұрын
Hi Kevin👍Yeah, its only a small tip, but if that riser is not square, you'll always struggle to plumb the newel😬Thanks for your comment bud😎
@ironian246 ай бұрын
Great video, thx for sharing, we are making a solid oak staircase with the winder at the bottom and straight at the top, it's nice to have a video as a reminder on a job I've done many years ago. I know how to make them, but I lose a little confidence after not doing one for many years, so this has refreshed what I already know, nice to see a quality craftsmen at work.
@thetallcarpenter6 ай бұрын
Hi there🖐I know exactly how you feel about being 'rusty' if you haven't done something for a long time, and like you say, sometimes just a few little reminders bring it all back👊Thanks for watching and your comment 😎 Cheers Del
@SuperWayneyb Жыл бұрын
I always look forward to your videos great to see how another trade is done and always such high quality workmanship 🤘😎🤘
@thetallcarpenter Жыл бұрын
I always look forward to your signature emojis Wayne🤩Cheers fella
@davetaylor4741 Жыл бұрын
All that time spent installing stairs for a living paid off. Working out all the top and bottom cuts the hardest part. You make it look easy.
@thetallcarpenter Жыл бұрын
Irony is Dave, I used to be really intimidated by stair fitting, but like you say, facing your fears and getting on with it over the years has made it come really easy now👍Thanks for watching bud 😎 Cheers Del
@philipwilliams8114 Жыл бұрын
Great vid; tons of experience and wise thinking on show there. Loving the wonky house series 👍
@thetallcarpenter Жыл бұрын
Thank you Philip🤩I hated stairs when I was learning, but they are one of my favourite jobs now👍Cheers Del
@carllamb6711 Жыл бұрын
Great to see ya back my mate….love how you explain everything as you go along thanks Del👍👍👍🍺🍺
@thetallcarpenter Жыл бұрын
Hi Carl🖐I've just been crazy busy bud, and I hope you're doing OK mate🤞
@attlee1945 Жыл бұрын
Love watching you do stairs. Great job Del
@thetallcarpenter Жыл бұрын
Thank you Steve🤩I find doing stairs very enjoyable👍Cheers
@davidblake1663 Жыл бұрын
Thanks Del. I enjoy your videos and appreciate the time and effort it takes to make them. Looking forward to the mistake in the next one!
@thetallcarpenter Жыл бұрын
Appreciate your comment David🤗as it is quite time consuming😬
@Mike_5 Жыл бұрын
Perfect job and as you are so tall the ideal skilled man to install staircases !
@thetallcarpenter Жыл бұрын
Being tall has its advantages Mike🤩Thanks for watching 😎 Cheers Del
@philhyde2635 Жыл бұрын
Brilliant. Yes please to part 2.
@thetallcarpenter Жыл бұрын
It's coming soon Phil🫡Cheers Del
@svlamancha9877 Жыл бұрын
Great video Dell. I’ve got a staircase to do so loving the tips. Pick yourself up a tapered drill and countersink bit set. Axminster do a nice set. Pilot, clearance drill and countersink all in one operation. Save you swapping bits over. Looking forward to the next instalment. All the best. 👍
@thetallcarpenter Жыл бұрын
Hi there🖐I've seen those combined drill sinks you mention, and they do look good👊Thanks for watching and your comment 😎 Cheers Del
@garyblake3130 Жыл бұрын
Nice one Del, another excellent instructional video.
@thetallcarpenter Жыл бұрын
Cheers Gary😎More coming soon👍
@johnmorrissey1675 Жыл бұрын
See it's a new pencil day Del, Kite winders are always slower to fit , nice one Del ☘️🇮🇪🤟🩼😅
@thetallcarpenter Жыл бұрын
Well spotted John🤩It really WAS a new pencil👊Thanks, as always for watching and your comments🤗Cheers Del
@Transformityourself Жыл бұрын
yes mate this is just the video I needed... I will be fitting stairs like this on my bungalow to house project!!!
@thetallcarpenter Жыл бұрын
That's wicked bud🤩Hope these video's help👍Cheers Del
@jimgeelan5949 Жыл бұрын
Nice to see all that glue and loads of fixings in all the parts, shame they didn’t do that in my daughter new build house by the company beginning with b and ending in is.
@thetallcarpenter Жыл бұрын
Unfortunately it's all to common for stairs to end with problems due to not being fitted properly😬Thanks for watching 😎 Cheers Del
@Mitch-Hendren Жыл бұрын
So bad they've changed their name on merger. Starts with v and ends in ry now !
@billyirwin1098 Жыл бұрын
First! I was doing stairs today too, can’t wait for part 2
@thetallcarpenter Жыл бұрын
Part 2 coming soon Billy🤞(my fellow stair installer dude🤩) Cheers Del
@johnwaby4321 Жыл бұрын
Very nice so far del ..you have to have your thinking cap on when doing all those cuts ..👍👍👍
@thetallcarpenter Жыл бұрын
You sure do John🤯And my thinking cap slipped off a little as you'll see in the next videos😬Cheers Del
@marcwalters7541 Жыл бұрын
Top job as always Del 🤜🏻🤛🏻
@thetallcarpenter Жыл бұрын
Thanks for watching Marc🤩Cheers
@Pete.Ty1 Жыл бұрын
👍👍👍.Thanks Del
@thetallcarpenter Жыл бұрын
No worries Pete🤩
@alistaircameron3237 Жыл бұрын
Nice work as always. 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@thetallcarpenter Жыл бұрын
Thank you Alistair🤩
@denty32 Жыл бұрын
Top work Del 👏👏
@thetallcarpenter Жыл бұрын
Cheers Mark🤩
@pat_link_ Жыл бұрын
Cant wait for part 2 of the stairs install
@thetallcarpenter Жыл бұрын
Hi Pat🖐I was going to make it just 1 video, but it would have been 1.5 hours long😵💫Cheers Del
@fardastevie2827 Жыл бұрын
i love seeing how how you improvise because of you working on your own im the same lol
@thetallcarpenter Жыл бұрын
You learn to adapt to flying solo Stevie😉
@TheDickPuller Жыл бұрын
Del, as a Plumber its great watching a Craftsman like yourself. It’s always amazes me how some can see the finished job in their head & allow for all the things involved. I must be honest & cringed a wee bit when you took much ‘meat’ off the Stringer at the top. I thought ‘he’s not left much to hook on with’!! But as always, your Brain was ahead of the game👍 I’m really looking forward to the next part. Makes me think of guys back in the day, with a handful of tools, what they could do. Thanks mate. PS. Some of the Passy Slinging Wood Butchers I work with would be lost with a job like that!!
@thetallcarpenter Жыл бұрын
Hi FB🖐I appreciate your great comment bud, and it's just years of experience being able to work backwards from the end result you want to achieve👍It's always great to have other tradesmen watching, and especially ones that leave nice comments🤗Cheers Del
@LTWCarpentry Жыл бұрын
Great job as always mate ! Show how tall you are, I normally use a step ladder to hook the top section on 😂 I have to ask, what’s in the tobacco tin ?
@thetallcarpenter Жыл бұрын
To be fair bud, its only 2.4m from floor to floor, so it does make it a bit easier😉And the tobacco tin has got private things in it😆(well, drill bits and screwdriver points👍) Cheers
@johnbullough6431 Жыл бұрын
Top man del 👍👍
@thetallcarpenter Жыл бұрын
Thanks for watching John🤩
@michaelplays2449 Жыл бұрын
Great video Del !!!! thank you
@thetallcarpenter Жыл бұрын
My pleasure Michael🫡Cheers
@arthuranderson7741 Жыл бұрын
as always another nice piece of content.
@thetallcarpenter Жыл бұрын
Thank you Arthur🤩
@benchippy8039 Жыл бұрын
I’m watching this purely to see how you getting 2&8 in without turning the air blue!
@thetallcarpenter Жыл бұрын
The air was blue alright Ben😵I just edited it all out😁Cheers Del
@fardastevie2827 Жыл бұрын
hello del nice to see your doing bits was thinking you had won the lotto and was living life 🤣🤣 but i must admit there is not enough time in the day just crazy out there with work at the moment
@thetallcarpenter Жыл бұрын
Hi Stevie🖐I know what you mean bud, and I'm super busy and turning work down left, right and centre😬Cheers bud
@fardastevie2827 Жыл бұрын
@@thetallcarpenter my problem is i should learn to say i cant but im always helping out other people sad eh lol
@thetallcarpenter Жыл бұрын
@@fardastevie2827 We're hard wired not to say 'no' bud🙃
@adriandotsmall Жыл бұрын
👍
@thetallcarpenter Жыл бұрын
🫡🤗
@neil-mv3it Жыл бұрын
great video del
@thetallcarpenter Жыл бұрын
Thanks for watching Neil😎
@ksly742610 ай бұрын
5 videos to catch up on nice
@thetallcarpenter10 ай бұрын
I appreciate you watching bud🤩Cheers Del
@danielbarnard9423 Жыл бұрын
Great video as always! Just wondered why you use pva on the stair joints and not PU glue? I’ve always found the foaming action as it dries guarantees no squeaks!
@thetallcarpenter Жыл бұрын
Hi Daniel🖐PVA glue is INSANELY strong when used on tight joints, and is much more user friendly when used on stairs👍I'm not saying its superior to PU glue, as PU glue is VERY strong and good at bonding non tight joints💪it's just a bit messy for use on stairs😎Thanks for watching and your comment 🤩Cheers Del
@bazbaz3035 Жыл бұрын
It’s a good job your nice and tall!!😂😂
@thetallcarpenter Жыл бұрын
They are slightly lower ceiling BB😎Thanks for watching🤩Cheers Del
@Ultimate-roofing-square. Жыл бұрын
Nice Del. Problem in the next part… 😬 👊🏻
@thetallcarpenter Жыл бұрын
Hi Dan🖐Yes bud, a problem I could have avoided as well😬Thanks for watching 😎
@Ultimate-roofing-square. Жыл бұрын
@@thetallcarpenter oh well, I’m sure you got it sorted. 😉
@thetallcarpenter Жыл бұрын
@@Ultimate-roofing-square. 🤔👍😎
@julietphillips1991 Жыл бұрын
Del, doesn't it bother you at all, being a right-hander, using a circular saw with the blade on the right and the motor on the left?
@thetallcarpenter Жыл бұрын
Hi there🖐Absolutely not😲I find blade right saws far easier to use than blade left ones🤔It's mainly due to the better sighting of the blade as you lean over the saw, and as you lean over the saw, you bring it closer in towards your body where you can utilise your core strength better, which gives better power and control👊 I find myself leaning away from my blade left saw to sight the blade, plus it shoots the dust straight into my pockets😆Thanks for your comment😎
@julietphillips1991 Жыл бұрын
@@thetallcarpenter Two things: you're a pro, I'm just a diyer and you're tall, I'm not. My issue is sighting the blade because for me it's over there and I find myself craning and leaning over too much. It took me a while to realize that some saws have the blade on the right and others on the left.
@thetallcarpenter Жыл бұрын
@julietphillips1991 Good points, and I think blade orientation can suite certain jobs and the hand of the operator also has a bearing👍
@philipwilliams8114 Жыл бұрын
Were your work mates cross that you wouldn’t let them have the wireless on while filming?
@thetallcarpenter Жыл бұрын
Hi Philip🖐They didn't have the radio out on this day, but as you may see from my other videos, if there is lots of noise or a radio going, I usually edit that part to music👍Cheers Del
@briangordon1767 Жыл бұрын
Is that a golden Virginia tin sticking out of nail bag Del it's been a while since I seen one of them on the job apart from my own that is
@thetallcarpenter Жыл бұрын
It sure is Brian💪and it's cool that you have one aswel👊Thanks for watching 😎 Cheers Del
@petermcwhirter2215 Жыл бұрын
Hi do you always start fitting stairs from the top? My builder says he does it from bottom.
@thetallcarpenter Жыл бұрын
ALWAYS start fitting from the top Peter👍as the top tread/nosing is an absolute fixed point with no scope for adjustment, unlike the bottom tread/riser which you wouldn't notice being 10mm higher or 10mm lower👊Thanks for watching 😎 Cheers Del
@Kiss4cooper Жыл бұрын
A+ for no typos 😂
@thetallcarpenter Жыл бұрын
😁👍😎
@neilhowarth9362 Жыл бұрын
👍 just wondering where you've been
@thetallcarpenter Жыл бұрын
Still here Neil👍Just not been able to video jobs lately🫡Thanks for watching bud 😎 Cheers Del
@chriswild2458 Жыл бұрын
4:59 battery s charged 😂
@thetallcarpenter Жыл бұрын
Your hearing works well Chris🤩
@chriswild2458 Жыл бұрын
Tuned into makita 😳😀
@richardstevenson2727 Жыл бұрын
🫡
@thetallcarpenter Жыл бұрын
🤗😎
@davedawson9851 Жыл бұрын
Aaargh! Wassaproblem? Waassaprawbplemmmm!? Bloody cliffhangers - this is worse than Dynasty and Dallas this is. The design is all to cock innit? Total rise all up the chute? Going too big to leave 750mm at the bottom for the stair lift? Wassaprobleeeeemmmmmmmmmmmmm?
@thetallcarpenter Жыл бұрын
Hi Dave🖐There's an issue with the joists being out of level bud😲Great comment though fella😎Cheers Del
@davedawson9851 Жыл бұрын
@@thetallcarpenter Oh lawd. Joiners eh? Can't trust 'em. 😲 I mean OTHER joiners o' course. I bet you sorted it just lovely. Can't wait. 👍👍
@Mitch-Hendren Жыл бұрын
I agree tis like eastenders !! ( So Im told)😉
@thetallcarpenter Жыл бұрын
@@Mitch-Hendren The next instalment is coming soon, but they'll be no cockny's in it😬
@SteveAndAlexBuild Жыл бұрын
Making a complicated job look easy as always Del 👌🏼🧱👍🏼