Great video thank you especially for me easy to follow. Proud of myself

Hi there THANKYOU very much for uploading this video....This was brilliant. Clear, simple no fuss and straight forward and I was able to complete my lock replacement following every step of your video.I can't thank you enough.

Your a life saver, I've been trying to sort my locks out for ages then discovered Ur vid sorted straight away, thanks alot.

Thanks for this - thought I would be up for big $$ to get someone to do this for me - saved me big time and life is so much easier with 1 key instead of 5!!

Hi Jimmy Great info I found that getting the lock barrel was out a pain to jiggle free I removed the small O ring & then I was able to see the little brass tab move & slip out in the slot First 5 minutes stupid me turned the key away from that slot Thanks

The one video that worked so well fixing our Thetford cassette door lock and push button.

Just to add, on my Elddis motorhome I was struggling a bit to re assembine the plastic bits and springs because I didn't really want to take the door off so I left it in situe, which meant the springs kept dropping down under gravity, so I decided to put a tiny bit of superglue on the top ring spirals which took five seconds and then it was really easy. I would advise anyone to take a clear photograph before you dismantle, but your video was great because I could freeze it at any point. Thanks again for uploading.

Top job! As you say, no info anywhere else on this, so a life saver. Thanks

Thanks so much. I had a mechanism that jammed. I opened it but parts exploded like a jack-in-a-box. So this video helped me put it back together.

Very good video he is spot on as I had taken mine off and couldn’t remember which way it went back Don’t use supper glue like the last comment Take your time and take the door off lay it down and follow the video Big thumbs up for me

All good if your hatch hinges DOWNWARD - If your hatch hinges sideways, like a door, it is quite hard to reinstall all the springs at once! RECOMMEND using SUPERGLUE to carefully stick the spring to the BLUE plastic bit first. It is then really easy to hold the two clips and springs with one hand, and fit the cover while the spring on the blue plastic bit stays put! Thanks for the video - it's great - and also thanks for the comments on removing the O-ring so you can use a normal small screwdriver to take out the barrel.

Would have been lost without this video Cheers 👍

Just the video I was looking for. Thank you for making it. Now I have a working lock.

Thank you so much, you make everything look so easy, I didn't have a clue how to put it back together after my key snapped in the lock. :)

Yeah good informative VID, but like Thomas below I couldnt get the brass lug to move so removed the back rubber o ring and depressed the brass lug from there. Cheers. (Graeme), Carnoustie. Scotland.

Simple tip and no thin rod required. Once you have removed the lock mechanism out of the door (as in the video), turn the lock over to look at the back, remove the O ring and you can see the gold locking tab. Press in with a thin screw driver and the lock comes out. Replace barrel as in video.

The best how to video

Very informative, thank you.( I lifted the small O ring and depressed the barrel tab from the outside to remove it.)

Thanks so much, a fantastic video which saved me so much time!

Very helpful thank you...

An easier way. I removed the dust cover at the rear of the barrel and pushed down on the little brass locking bit.

Excellent information especially the thin wiper rod trick, spot on and thanks for showing.

Top. Thank you for the Top Video (Y)

Thanks, mate. I will be tackling this.

Good job pal 🏏🏴󠁧󠁢󠁥󠁮󠁧󠁿

Just what I was looking for - thanks

Thanks mate got me out of trouble with mine

Your a true legend thanks mate 👍🏻

Absolute lifesaver, thanks dude

Thanks :-)

Instead of buying new barrels and throwing the others away, has anyone had their barrels re-keyed by a locksmith?

Great Video thanks for sharing

I did this exactly and now I can't open the hatch even though the lockes are unlocked . Any thoughts ?

Awesome vid! How was your lap?

Thanks for sharing video. Got me out of the s##t 🤣🤣

Thanks really helpful

How do you get the barrel out of the black plastic part ours are stuck ???

Thanks for the video. What the f... this loks security is 0, anyone can open the locks by removing the barrel from outside ... now I know why my caravan compartment has missing barrel top metal sheet, someone try to pull it out by grabbing it.

Follow previous Comments to get The lock out of the assembly @rickcathysmith8449 1 year ago Hi Jimmy Great info I found that getting the lock barrel was out a pain to jiggle free I removed the small O ring & then I was able to see the little brass tab move & slip out in the slot