Bandsaw Jigs Best 4 for Your Woodworking Shop

Рет қаралды 10,659

Күн бұрын

These are my favorite bandsaw jigs and fixtures for woodworking bandsaws including circle cutting jig, small parts crosscut sled, low fence with stop block, and a template rub jig. Make your bandsaw better with these useful jigs!
Next videos to watch - Bandsaw Dust Collection Mods... • Bandsaw Dust Collectio...
Make a Bandsaw Circle Cutting Jig... • Bandsaw Circle Cutting...
Kreg Top Trak 24"... amzn.to/45Vmh74
Kreg Top Trak Kit... amzn.to/46Q3M59
Kreg Production Stop... amzn.to/40jiSOq
WoodRiver Combination Track (for low fence)... amzn.to/40dTJnY
WoodRiver Miter Track Slider (for circle jig)... amzn.to/40jGWjZ
WoodRiver Miter Track Nut (for mounting low fence)... amzn.to/3Q8lsly
Laguna 1412 (featured in video)... amzn.to/3QjfyOm
Laguna 14BX ... amzn.to/3FDnjK8
Or shop my entire curated collection (Shop Tested) on The Thoughtful Woodworker Storefront…
www.amazon.com/shop/thethough...
As an Amazon Associate I earn commissions, and am grateful for your support.

Пікірлер: 31

@bernardmcmahon7434 Ай бұрын

Great assortment of jigs. Thanks for sharing.

@TheThoughtfulWoodworker 9 ай бұрын

Some fun jigs to build for the bandsaw

@edmccullough1828 9 ай бұрын

I hadn't seen a template rub jig before. I'm definitely adding that one to my lineup. Thanks as always for your helpful videos!

@TheThoughtfulWoodworker 9 ай бұрын

Thanks Ed!

@Dandroid61 9 ай бұрын

I've checked out many lately, but I must say, that is an excellent circle jig! I like the other jigs too. Great video!

@TheThoughtfulWoodworker 9 ай бұрын

Thanks Dan! I made it quite a while ago, and it's holding up great.

@rolandkuhn9066 9 ай бұрын

Don't comment often but those are excellent. Especially like the low fence but that pattern follower is pretty good as well. Thanks for sharing.

@TheThoughtfulWoodworker 9 ай бұрын

Thanks Roland! Thanks for weighing in.

@henrysara7716 9 ай бұрын

Thy great jigs to have around.

@TheThoughtfulWoodworker 9 ай бұрын

Thanks!

@magicworldbyjorg 9 ай бұрын

,a cool video keep up the great content.. Thank you……

@TheThoughtfulWoodworker 9 ай бұрын

Thank you!

@magicworldbyjorg 9 ай бұрын

@@TheThoughtfulWoodworker Thank you very mutch... have a nice Start of the week.... see you….

@atothezeezee 9 ай бұрын

Excellent! Cool stuff.

@TheThoughtfulWoodworker 9 ай бұрын

Thanks!

@codeblu7738 5 ай бұрын

Such a great, simple video. Really nice stuff!

@larryk6330 9 ай бұрын

I make a lot of pieces that have curve edges and have found this method to be amazingly quick and easy. Just have to be careful your tape doesn't slip. Really messes up everything.

@TheThoughtfulWoodworker 9 ай бұрын

Yep, good tape makes a difference. Thanks.

@jeffcarr392 3 ай бұрын

Great video, I like these jigs, probably going to make them to. At 2:20 you say your jig can cut up to a radius of 28 inches, oops, I'm assuming you meant radius of 14, or diameter of 28. I'm looking at building an adjustable jig for various angles, adjustable in all 3 planes (I know the table can be tilt, as can the mitre fence) especially for compound cuts, can you suggest any. Sub'd and liked. 👍

@TheThoughtfulWoodworker 3 ай бұрын

Yes you are correct the circle jig will cut circles up to 28" diameter. I've never seen a shop made jig for cutting compound angles at the bandsaw, but this may offer some inspiration... infinitytools.com/products/vrs-200-professional-vertical-router-sled?_pos=8&_sid=988c0b083&_ss=r Thanks!

@thomasdenevan4644 4 ай бұрын

What did you use to cut the miter slider bar? You mentioned bandsaw but does it have to be metal capable? I only have a wood bandsaw. Thanks and great videos. Going to subscribe now!

@TheThoughtfulWoodworker 4 ай бұрын

I actually make small miter bars like this from wood. It works just fine with a little paste wax. Thanks!

$@luminousfractal420$

@luminousfractal420 3 ай бұрын

i had to bolt an inch thick mdf onto my wen table, either the miter slot or the included miter bar were so out of spec they almost fell out vertically. maybe ill get some extra miter bar and hope the table is in spec. also threw out the included fence, dangerously bad design wobbled and bent before i even used it once. wen=not good.

@TheThoughtfulWoodworker 3 ай бұрын

Ooohh sounds like a bad experience with that one.

@horsetowater 6 ай бұрын

Dowel trimming on a tablesaw is a sad thought for the demise of the handsaw jeepers 😂

@woodsniffer 6 ай бұрын

Very nice thanks for posting do you have a bandsaw jig for sawing logs?

@TheThoughtfulWoodworker 6 ай бұрын

No, I haven't gotten into that. Sorry. Hopefully it's not too hard to build.

@woodsniffer 6 ай бұрын

Jason made this look easy kzfaq.info/get/bejne/jNVne7CpzLvIZqM.html@@TheThoughtfulWoodworker

@GodsMan500 9 ай бұрын

For the circle jig, what is the sweet spot for how the centering pin is set relative to the blade? Should the pin line up with the front of the teeth of the blade, or should it be in line with the middle of the blade?

@TheThoughtfulWoodworker 9 ай бұрын

Anywhere adjacent to the blade or teeth seems to work well for the pivot track. Great question! Best to you.

@GodsMan500 9 ай бұрын

@@TheThoughtfulWoodworker Thank you!