They did not disappoint! - $200 Furitek FX118

Рет қаралды 13,526

10 ай бұрын

Furitek is amazing at the motor and ESC game, and now their first RTR is out, and it did not disappoint! The Fury Wagon FX118, while based on the Hobby Plus CR18, shows off a ton of upgrades, including a powerful brushless setup. There's a lot to like here!
Full rundown of features:
- Front & Rear Portal Axles
- All Bullet Proof Metal Gears
- Oil-Filled Big Bore Shocks with aluminum caps
- LCG Anodized Aluminum Chassis
- Servo On Axle Steering System
- Furitek Venom BRUSHLESS Motor
- Furitek Lizard Pro BRUSHLESS ESC with FOC technology
- Built-in bluetooth module for esc control via apps
- Extra Clearance FURY WAGON Lexan Body
- Scale Detail Molded Body Parts w/Roof Light System
- 1.2inch Internal High performance Beadlock Wheels & Tires
- Large Steering Angle up to 45 degrees
- Widely Adjustable Shock Geometry
- Reverse Rotation Drive Shaft
- 600mAh 2s lipo battery for long running time
- 4CH TX/RX included and compatible with Furitek brushless system
Want one? bit.ly/44zFPNR
More Info: furitek.com/collections/rtr
3D Printing is amazing:
BambuLabs X1 Carbon: shareasale.com/r.cfm?b=235382...
BambuLabs P1P on Sale: shareasale.com/r.cfm?b=235472...
BambuLabs P1S: shareasale.com/r.cfm?b=237790...
P1S Combo with AMS: shareasale.com/r.cfm?b=237790...
Our merch is super cool: teespring.com/stores/scale-bu...
#furitek
#furywagon
#ilearnedsomethingtoday
#scalebuildersguild
Fall 2023 Stickers are COMING SOON!
► Follow us on Instagram! / scalebuildersguild
► Follow us on Facebook! / scalebuildersguild
► Join our forum!
www.scalebuildersguild.com/forum
► Merch available here:
teespring.com/stores/scale-bu...
I shoot all my videos on the Sony a7c and a6500 in 4K, with Sigma 16mm, Tamron 28-70 and 55-210mm f1.4 lenses and the Zhiyun Crane V2.
MB01IXMY0E2759Y

Пікірлер: 102

@furitek 10 ай бұрын

Amazing video Matt!!!

@scalebuildersguild 10 ай бұрын

Thank you Furitek! Nice little truck you made!

@THERCDOCTOR 10 ай бұрын

Nice rig guys and, yeah bro nice video

@JThelen1031 10 ай бұрын

Honestly, it strikes me as a TRX4m with upgrade chassis rails and brushless electronics. It's honestly a really good deal for $200.

@crawling86 10 ай бұрын

I think you should cut the bed off and make your own🙏

@thomasbialzik3060 10 ай бұрын

Very thorough, as always 👍👍. Thanks Mathew❤

@scalebuildersguild 10 ай бұрын

Thanks for watching!

@microcrawlerclub 10 ай бұрын

So pumped for this rig.

@ChrisMatthewsKF7WRS 10 ай бұрын

Yet another Masterpiece! And thank you for the B-Roll! It was an impressive collection of extravagant clips, that outline the Joy that was had, or could be had if we all get ourselves a new Furitek FX118! Thank you Matt for your continuing dedication to the hobby!

@scalebuildersguild 10 ай бұрын

Wow! A masterpiece? High praise indeed... have a great long weekend?

@caseys_cozy_garage 10 ай бұрын

This is super cool!

@matthewcopeland4441 10 ай бұрын

Excited to see this out! Heck of a value in the market. I didn't know orange was a color option-very cool.

@scalebuildersguild 10 ай бұрын

Something must be up with my color LUT. It's supposed to be red!

@oknights112 10 ай бұрын

Awesome review. Man that is a steal for $200.

@scalebuildersguild 10 ай бұрын

Agreed!

@christophermears7738 10 ай бұрын

Furitek makes some killer stuff . I just installed a lizard ten esc in my phoenix and I love it

@scalebuildersguild 10 ай бұрын

Agreed!

@rcdriver 10 ай бұрын

Great video! B-roll mission successful 😄

@rcmedia9516 3 ай бұрын

Thank you.

@Sparroh Ай бұрын

Yup bought it

@jeffmackovitch9987 10 ай бұрын

Nice review. I just can’t keep up with the releases lately! Just got my EVO CR-18 and THIS Fury has everything needed to update my truck and at a great price! ALSO please do something about that chair! You deserve it! 😂

@scalebuildersguild 10 ай бұрын

I know, I know... a new chair is on the list! Thanks for watching!

@MatthewJorgensen1968 10 ай бұрын

Just in time for winter comps on the inside where you can stay warm while getting your comp fix...

@scalebuildersguild 10 ай бұрын

Exactly!

@88davidw 10 ай бұрын

Looks very cool. I think it would look very cool if you customised it 👍🏼

@jerryvolpini7987 10 ай бұрын

Great little truck, hell of a deal! 👍 A nicer body maybe but stock body is good to beat on, lol.

@scalebuildersguild 10 ай бұрын

I totally agree!

@user-ih7cu2zn2j 9 ай бұрын

It would be neat to see the steering servo chassis mounted.

@jwill540 8 ай бұрын

And a hard body.

@knotical689 10 ай бұрын

Pre ordered! Not a huge fan of the body, but that's not hard to change. Will be fun to have 2 mini crawlers so my brother can join in

@scalebuildersguild 10 ай бұрын

That'll be awesome. Enjoy!

@daniels_199 10 ай бұрын

I had to order ;)

@scalebuildersguild 10 ай бұрын

Enjoy it!

@heinies_hobbies 10 ай бұрын

I dig everything but the body 😂

@rcgoodtimes6657 10 ай бұрын

Shock mount options for days! The body and portals don’t really peak my interest but brushless at that price point is pretty cool

@scalebuildersguild 10 ай бұрын

Definitely a good deal!

@RCManiacs 10 ай бұрын

That low speed 😮

@VermontScaleCustoms 10 ай бұрын

For $200 you're getting a lot in an 18th scale RTR. What would be cool, though, is if some of these RC companies would think about releasing a Dodge Power Wagon at some point. I agree with you, like the Jeep Rubicon, there are not enough of them.

@needlejuse1113 10 ай бұрын

❤❤

@zamoragera13 10 ай бұрын

Not bad. I would put another body and change wheels. Then maybe.

@tarantula-man 10 ай бұрын

i love this, i was debating getting the trx4m high trail or not but i'll grab this fury wagon instead, nice review as always.

@scalebuildersguild 10 ай бұрын

Thanks for watching!

@jrjoker541 9 ай бұрын

like number 900🎉🎉🎉🎉🎉

@player1dad808 10 ай бұрын

I don't love this body style but the platform looks good. I'd want to put a scx or trx4m high trail body on it if possible.

@scalebuildersguild 10 ай бұрын

The wheelbase is pretty close for the TRX4M but the SCX might be too big. Thanks for watching!

@Noizy-Boy 10 ай бұрын

Very nice review! I just put a Furitek system in my TRX4M, performs much better now. Do you know if that is a worm gear setup on the diffs? Thanks for the info!

@scalebuildersguild 10 ай бұрын

Standard ring and pinion!

@Noizy-Boy 10 ай бұрын

@@scalebuildersguild Awesome! Thanks!

@rectown 7 ай бұрын

Nice video,Does Treal Fms axles work to upgrade the plastic axles under it?I have the same rig but would like more durable axles and low weight.

@scalebuildersguild 7 ай бұрын

I honestly don’t know, if they fit on the CR18, then they might fit here too. Thanks for watching!

@etowngti 9 ай бұрын

Just pulled the trigger on one of these, as I'm a massive fan of the CR18p platform. Any body suggestions? I want to do a whacky scale sleeper build for it, tbh!

@scalebuildersguild 9 ай бұрын

Sounds fun! I’m looking at 1/20 static models now!

@robinkesterlives 10 ай бұрын

The body doesnt do anything for me but the chassis and gear are outstanding looking. We know how good Furitek's gear is, so it has to be a win.

@robinkesterlives 10 ай бұрын

The black body with flames does look cool. Great overall deal, esp for those who want to try a proper crawler in a smaller scale w a solid elec tronics setup.

@keldonator 9 ай бұрын

Is the wheelbase the same as the rock van? Also, is the esc and receiver separate?

@scalebuildersguild 9 ай бұрын

Sorry, don’t have a Rock Van. ESC and Receiver are separate.

@covecityboys 10 ай бұрын

All it needs is a good ESC and servo.

@scalebuildersguild 10 ай бұрын

It has an excellent ESC already!

@covecityboys 10 ай бұрын

@@scalebuildersguild did they do some updating/changes what have you to get rid of the glitching problems? That’s the only issues I’ve had with the 3 lizard pros I’ve had. Other than that, when they worked they were great.

@rustysglass 10 ай бұрын

What else would you do to that???? Links wheels and tires and maybe a servo it's about all you need maybe a little weight up front and that's it!!!

@keldonator 10 ай бұрын

Pretty sure those are plastic beadlock wheels. This is by far the best deal out there for this scale. The esc makes this thing so great. That's always the weakest link on others and on this is the strong point.

@scalebuildersguild 10 ай бұрын

You're correct! They're beadlock wheels. It REALLY is a great deal!

@mikerainey3847 10 ай бұрын

Placed my order last night..... ...... waiting...waiting😢

@scalebuildersguild 10 ай бұрын

Enjoy!

@rjleunura 10 ай бұрын

3s lipo works on the venom?

@scalebuildersguild 10 ай бұрын

Not that I'm aware of, at this scale anyway I'd stick with 2S. I don't think it's capable of running 3S.

@paulgugliotti9446 7 ай бұрын

Did you bind GT5 to stock rx?

@scalebuildersguild 7 ай бұрын

Yes. Thanks for watching!

@rakhunproductions 7 ай бұрын

What would you choose this or the FMS FCX 18?

@scalebuildersguild 7 ай бұрын

You get a substantially better power system here. It's not nearly as "scale" but a much better driving experience in my opinion.

@rakhunproductions 7 ай бұрын

@@scalebuildersguild thanks matt. Much more keen for performance than scale so guess it’s an easy decision 😄 now let there be some sweet cyber Monday deals

@slinginlead8353 9 ай бұрын

Those wheels are beadlocks.. not glued.. they are 1.2’s.. there is a fair amount of upgrades available for it..

@outcastrc8052 10 ай бұрын

Q: Plastic or metal links? How is the steering servo?

@scalebuildersguild 10 ай бұрын

Plastic links. Steering feels pretty decent!

@outcastrc8052 10 ай бұрын

THX@@scalebuildersguild

@michaelchoate2810 10 ай бұрын

Can you binf this to a flysky nb4?

@scalebuildersguild 10 ай бұрын

I don't have that radio, so can't confirm, but as I showed in the video, I couldn't get the included radio to bind, and bound it to another FlySky radio I had, so chances are good!

@jrsantoyo9028 10 ай бұрын

Vinny politan with a hat on lol

@AUBREYTHOMAS1979 10 ай бұрын

Dude. I love these videos. But. We all know to hit the buttons so stop saying it.😂 Love your work. And love the content and quality of it

@johnnyhotshoe1292 10 ай бұрын

Hey don't for to hit that😂

@stevefrench3564 9 ай бұрын

Web site says there beadlock wheels

@scalebuildersguild 9 ай бұрын

Yes, corrected. They are.

@user-jr9ej2sg3w 9 ай бұрын

Hi ..is the electronics waterproof

@scalebuildersguild 9 ай бұрын

Apparently, yes. I haven't tested that theory though!

@DanGibbs-rx1vl 4 ай бұрын

So i bought the fury tek fury wagon and 2 days after i bought it it quit moving forward only reverse so then i downloaded the app udated firmware and it will go forawrd but no reverse unless i change it in the app and now it will not charge so very dissapointed in this truck. When it was fully functional the first 2 days it was awesome now not so much

@scalebuildersguild 4 ай бұрын

Have you tried contacting them? I’m sure they can help you.

@DanGibbs-rx1vl 4 ай бұрын

@scalebuildersguild yes they want a video so they can show the warranty dept problem is sending a video is a major PITA on my phone. So last email i sent them i told them i'm shipping the truck back to them and we can go from there

@DanGibbs-rx1vl 4 ай бұрын

Yes i emailed them and told them i was shipping the truck back to them and they said they will look at it and fix or replace it @@scalebuildersguild

@saturnfivehynrgrc581 10 ай бұрын

Hit the like button folks. Cheers.

@navigationmanship 10 ай бұрын

Nice brushless setup. The market is getting very full ... of power wagons!! Need something more original.

@Mike_and_Life 10 ай бұрын

The body is a pass for me, but the chassis alone is worth it. As for modding it, I say you 3d print a Pinto body, paint it a rusty brown and add an exploded gas tank in the back.

@scalebuildersguild 10 ай бұрын

That would be cool!

@Thepreppersbunkeroutdoors 7 ай бұрын

Are they playing chess while traxxas plays checkers?

@scalebuildersguild 7 ай бұрын

Close, but I still prefer the TRX4M chassis.

@user-jz5gj9zq5p 3 ай бұрын

So I have like all my crawlers, are power wagons, so didn't want this again same old body damn it. So can anyone actually tell me number 1 crawler or at least top 3, not 10, that's more of a race.

@scalebuildersguild 3 ай бұрын

You want the top 3 10th scale crawlers?

@Spor777 10 ай бұрын

Hoe did you get Josh's teuck 😂

@Spor777 10 ай бұрын

How did you get Josh's truck

@scottgoodrich9908 7 ай бұрын

Car is crap Drive shaft broke right out of the gate

@MarcoLemmetti 10 ай бұрын

Ughhh 🙄 I know companies want to make it affordable for everyone to crawl by keeping costs low but enough with the small scale stuff. Keep it at 1/10 call it a day. My 2 cents

@keldonator 10 ай бұрын

I'm on the opposite boat.