Things To Know When Installing Aftermarket Injectors & Fuel Rails

No video

Things To Know When Installing Aftermarket Injectors & Fuel Rails - Jay's Tech Tips

Рет қаралды 50,136

Күн бұрын

In this topic we cover an important part of aftermarket fuel safety when changing fuel injectors & fuel rail. Swapping out these parts is an easy process. We want to help make sure you stay aware of things that can cause failures and even a fire.
Full article: www.realstreet...
Thank you for watching! Don’t forget to Click SUBSCRIBE & turn on post notifications, click the bell 🔔 icon
👉 www.realstreetperformance.com 👈
sales@realstreetperformance.com
Phone: 407-695-7223
Text / Whatsapp: 407-724-2484
•Follow us•
Instagram: / realstreetperformance
Parts Instagram: / realstreetperformancep...
Powersports Instagram: / realstreetpowersports
Facebook: / real.street
Twitter: / realstreetrsp
TikTok: www.tiktok.com...

Пікірлер: 63

@yellowrice1453 Жыл бұрын

Can we all admit Jay is basically a car God? Even on his simplest videos I learn something about a topic I thought I knew plenty on.

@MotorSwapDan Жыл бұрын

Yea he is great

@O.A_Ih4teno0bs Жыл бұрын

Agreed

@realstreetperformance Жыл бұрын

We greatly appreciate the love!

@IxTechNiK Жыл бұрын

I’m in a hotel parking lot watching this. 10mm holding down the fuel rail on my d15b just came loose and was spraying fuel. Fixing it now lol

@MafiaboysWorld Жыл бұрын

I'll be placing my order for that Radium rail after Xmas Uncle Jay and that will be the final piece of what I need off you guys. Thank you for all the engine parts you have supplied for my 💩 box thus far and I'll be ready to represent in 2023. 😎👍

@TML34 Жыл бұрын

“the final piece..”. 😂😂 I’ve said that before.

@MafiaboysWorld Жыл бұрын

@@TML34 From them it is my final piece. I have some other parts but I can get them locally but the radium, even with shipping, locally can't beat Uncle Jay's prices. 👍

@racetune Жыл бұрын

I've had a fuel leak on the dyno myself in my Soarer 1JZ that made 386rwkw using a roller dyno. Replacement Sard 800cc side feed injectors. What happened was the top rail injector holders, held in with 2x 10mm head bolts, came loose to vibration and backed off slightly on the rear - which was enough to BEND the retaining rail and allow the injector to creep 5mm and break the O-ring seal under fuel pressure. I smelt the issue before it became lean on the dyno and fixed it on the spot. Now I blue Loctite injector rail bolts as a matter of safety and tighten to 15-20nm or the handbook spec - whichever is greater. Fuel fires are no damn joke - once it's alight, you have 1-3 seconds before it's all over.

@charityfannon5292 Жыл бұрын

Real street university. Love it guys keep the quality tutorials coming we love them 🤘

@realstreetperformance Жыл бұрын

Thanks! Will do!

@OzarksWildman Жыл бұрын

He sliced the cheap blue one up to make a cool cutaway 👍

@stronecorbett3656 8 ай бұрын

Thank for this video, needed this information now. Didn’t know the injectors could have some up and down play. I was just scratching my head wondering what was going on and started searching, this was the only good information I could actually find. And I even called fuel clinic to ask them lol

@just.a.simplejoe Жыл бұрын

I'm literally doing this now, upgrading fuel atm! Good info

@realstreetperformance Жыл бұрын

Good luck!

@bradleybatt1401 Жыл бұрын

More simple videos like these please. Excellent and clear explanation.

@realstreetperformance Жыл бұрын

More to come!

@wackyk1dtrammel510 Жыл бұрын

Thanks Jay, Learn something new anytime i hear you talk and you always make me question my rebuild. You're truly the JZ goat wish i had someone like you around !

@realstreetperformance Жыл бұрын

I appreciate that

@lelandcoberley8723 Жыл бұрын

Yeah I just made a note to check my rail bolts. Thanks Jay

@ScvttH Жыл бұрын

thank you for the info Jay 😁 keeping my supra safe

@Procharged32 Ай бұрын

Great tutorial

@GregoryBrettin Жыл бұрын

Simple but so important.

@six50motors Жыл бұрын

Great vid Jay I thought I was only guy that worried about this

@Microx3 Жыл бұрын

Excellent Tutorial on the Details.

@francisbeaudry8598 Жыл бұрын

nice vidéo ,,,,,,thing king about steve morris bad lock wase juste haven more of fire but also siros engine damage

@flyonbyya Жыл бұрын

Great vid ! All Jays vids are great !!

@ripnsoar Жыл бұрын

Right on time. Putting some on my jz right now

@merolavic2278 5 ай бұрын

Do you guys have or can make a video about fuel inejctor positioning/angles in relation to the duct, and effects of placing an injector further away from the intake valve speaking of thermal rise or lowering in combustion chamber/atomization etc

@Spudstrodamus Жыл бұрын

I watched a friend's car burn because of a fuel leak after changing injectors. Happened in a CVS parking lot car was destroyed from window up

@marcocoetzee6880 Жыл бұрын

Great video Jay. Very sensible information. Thanks.

@realstreetperformance Жыл бұрын

Glad you enjoyed it

@boostismagic Жыл бұрын

Trying to make a confident fit on Honda intakes with Bosch bodies is sketchy...I hand-sanded some nylon washers to slide up the injector and sit on top of the "cushions" and keep the injectors from squeazing into the bores. I feel like it will still leak boost. Need to test.

@trynasurvive5090 Жыл бұрын

I've had a failed injector o-ring on a past project car causing a Car-B-Q where nothing in front of the back seat was salvageable! Previous owner installed the injectors!

@mindovermatter3988 Жыл бұрын

I've had fuel fires on my mini bike motors like that. I run a fuel tech on a single cylinder engine and I've had intakes catch on fire before.

@zeroyon9 Жыл бұрын

Such a great video !

@needmoreboost6369 Жыл бұрын

Great vid mate and it’s definitely not an area to cut corners! Fuel fire isn’t funny! in my l36 pile of junk I had originally modified the steel fuel rails for -8 fittings and thought that would do, but I was wrong! Although being fastened under the plenum so there’s little risk of the rails lifting they still flex under high pressure and over time and with a missing bolt they actually bent enough to unseat an injector, a simple fix I just fitted an older models billet rails

@realstreetperformance Жыл бұрын

Thanks for the info

@andyali13 Жыл бұрын

Sometimes, the most elementary procedures are often the most overlooked.

@realstreetperformance Жыл бұрын

Facts!

@DAREDEVIL503 8 ай бұрын

So can you put aftermarket rails on a stock car or no?

@michaelnoyes4817 Жыл бұрын

Merry Xmas Jay

@Hoopers_s Жыл бұрын

Honda makes some good silicone spray.

@richardknight1258 Жыл бұрын

Teacha Jay just enter the class..

@Treaxvour 5 ай бұрын

Engine kept flooding when I put a cheap aftermarket pressure regulator, broken before I installed it. Took me way too long to realize it. I unplugged the fuel relay and cranked the engine to push the fuel out the spark plug holes onto a rag. Worked great the first 3 times. 4th time, for some reason I'm still unsure of, the moment i turned the key, Im not even sure i cranked it, there was a spark, maybe static electricity and all that fuel went boom. 4 foot flame. I ran so f*ing fast to grab the fire extinguisher. Survived with just burnt plug wires and vacuum hoses, and a little char on the battery. Take a lesson from me.. use a vacuum pump to suck out fuel flooded cylinders..

@2jzCapri Жыл бұрын

Guys those green adapters in this video where can I buy those

@brooker5625 Жыл бұрын

I’m finding it difficult to fine injector fuel rail that work with a2000 Dodge Ram 5.9 gas engine. The original part (53030598AC) is no longer available. I’m wondering what is available from after market custom designs, which I have not had any luck finding a source to obtain fuel rail with cross over tubes to fit the Dodge 5.9. Any suggestions.

@shashikaharripersadh5382 Жыл бұрын

Agreed 👍

@shashikaharripersadh5382 Жыл бұрын

Does this also apply to direct injection

@user-nf3oq2ge3g 2 ай бұрын

You know why the Subaru actually blows up. Fuel contamination, causing the injector to stick open, hydro lock the cylinder then after you try to start it the spark will ignite the fuel pouring into the exhaust. Then they burn to the ground.

@evokid379 Жыл бұрын

Seems pretty basic but I know a couple of guys who got burnt pretty badly in an engine fire when we were kids because of these exact issues. Car was stumbling and they pulled over and opened the hood not knowing they were opening the lid on a fuel fire

@bobhilly546312156332 Жыл бұрын

This is good to know info I’m building an efi 460 and there’s not many B of the shelf parts for the application so I have to modify them or make custom parts know anything about drilling intakes to accept fuel injectors?

@sategllib2191 2 ай бұрын

That's awesome. How did it turn out?

@bobhilly546312156332 2 ай бұрын

@@sategllib2191 decided it was to complex for what I wanted