This $20 synthesizer sounds very nice indeed

Рет қаралды 50,644

Күн бұрын

BPSynth is a #diy monophonic #virtualanalog #synthesizer based on a STM32F411 "BlackPill" microcontroller created by @Synthetech . In this video, I show which parts you need, where to get them and how to assemble them, plus some sound impressions. Table of contents:
00:00 short demo
00:07 hi
00:30 parts needed
00:58 were to get and how to install the firmware
02:23 building the BPSynth
04:20 building the MIDI jack
06:50 important considerations
07:14 set up a MIDI controller
07:39 synth engine overview
08:07 demonstation track
11:14 conclusion
Resources
Firmware can be found on Blaines' YT channel: @Synthetech
BlackPill STM32F411 board (I bought the F411 25M HSE) de.aliexpress.com/item/100500...
UDA 1334A DAC module de.aliexpress.com/item/100500...
5pin midi socket de.aliexpress.com/item/330301...
6N137 optocoupler de.aliexpress.com/item/100500...
220 and a 10k ohm resistor de.aliexpress.com/item/100500...
1N4148 diode de.aliexpress.com/item/100500...
Jumper wires de.aliexpress.com/item/100500...
Breadboard de.aliexpress.com/item/100500...
Electronic component tester and identifier www.amazon.com/-/de/dp/B0BK95...
HÄLP ZIS CHANNEL
/ floyd_steinberg
floydsteinberg.gumroad.com/
floydsteinberg.bandcamp.com/
/ @mr_floydst
Join us on Woody Piano Shack's Discord server: / discord
Get 7% off on DistroKid with this link distrokid.com/vip/floyd
PayPal.me www.paypal.me/alexselck
Shop a Huge Selection of Synths and Drum Machines at PerfectCircuit.com!
link.perfectcircuit.com/t/v1/...
Here's what I have in my setup at the moment. Want to have that, too? Please use the followings links and support me:
Yamaha EX5 www.ebay.com/sch/i.html?_nkw=...
Kasser Synths Arcade www.tindie.com/products/kasse...
Intech GRID: intech.studio/
MPC One, Novation PEAK, Reface DX, Source Audio Collider, Strymon Iridium, Zoom MS 70 CDR, Donner N-25, Akai EWI USB, Zoom R20, Zoom H5, Yamaha MT7, Roland Aira:
www.thomann.de/de/thlpg_3wyep...
Some bands / artists I've been following for a long time are (among others) Massive Attack, Pink Floyd, Pet Shop Boys, Archive, A-Ha, Yes, Porcupine Tree, John Mellencamp, Jean-Michel Jarre, Metallica, Peter Gabriel and Perturbator. So my music will kind of sound like those (without ever reaching the greatness of those artists, of course). :-)

Пікірлер: 166

@mr_floydst 3 ай бұрын

Please subscrive to Blaines' YT channel (and get the firmware over there): kzfaq.info/love/tlJGGQGuSFxayNWko_KhAg BlackPill STM32F411 board (I bought the F411 25M HSE) de.aliexpress.com/item/1005001456186625.html UDA 1334A DAC module de.aliexpress.com/item/1005004932558176.html 5pin midi socket de.aliexpress.com/item/33030129792.html 6N137 optocoupler de.aliexpress.com/item/1005004249645464.html 220 and a 10k ohm resistor de.aliexpress.com/item/1005004525936064.html 1N4148 diode de.aliexpress.com/item/1005004333197874.html Jumper wires de.aliexpress.com/item/1005005990715944.html Breadboard de.aliexpress.com/item/1005001456586666.html Electronic component tester and identifier www.amazon.com/-/de/dp/B0BK95J4TV

@Synthetech 3 ай бұрын

Thank you for the review Floyd! Greatly appreciated!! 😁 I hope to someday improve the BP Synth to be easier to build on a PCB with a OLED display and the ability to store PreSet patches.

@mr_floydst 3 ай бұрын

Thanks for giving me an interesting topic to talk about! :-)

@majordabalert 3 ай бұрын

That sounds awesome

@DetroitMicroSound 3 ай бұрын

It sounds fantastic! I would definitely buy a total system version, with display with a couple knobs especially. That way filter cutoff and filter envelope or resonance could be tweaked at once. 😁

@MePeterNicholls 2 ай бұрын

I adore these mini synth / midi projects

@mr_floydst 2 ай бұрын

Thanks! :)

@xvxvxvxv7704 3 ай бұрын

Blackpill is cool indeed. It's super cheap and exposes the full functionality of STM32Fxxx. But note that this project is a digital synth that doesn't use any special hardware (only midi and DAC), so you can code comparable synth on any computer for 0$. My favorite audio server is JACK, it has a very simple c (there are bindings for other languages) api, but if you don't want text programming you can always use puredata.

@mr_floydst 3 ай бұрын

Thanks for watching! This is correct, but I think the really low cost and small size of this synth makes it fun to build and learn. Plus you theoretically could fit it inside a midi controller keyboard to convert it to a "real" synth.

@xvxvxvxv7704 3 ай бұрын

@@mr_floydstYup, these days one can build a lot of cool stuff with how cheap and powerful those microcontrollers are. I think that picoTracker project is really cool. I found out about it from your video (that's how I found your channel too). I wonder why I haven't found it earlier since I'm on the lookout for these handheld tracker projects. I guess those are just really niche and hard to find.

@KRAFTWERK2K6 3 ай бұрын

JACK is amazing because it comes native with the majority of Linux Distributions, so you always have it available by default for audio projects.

@PostingCringeOnMain 3 ай бұрын

I mean, that kinda misses the point that people just like making stuff... and like having hardware that you can carry in your bag/pocket and not need a wifi connection to jam on. Sure, I *could* take my laptop and an installed copy of DEXED and a touch controller and blablabla... or I could just take my Volca FM2. I have yet to choose the laptop when faced with that decision.

@geoffclapp5280 2 ай бұрын

Focused single use devices are much better for me personally because you don't have too many choices, and you can just turn them on and they work the same every time forever.

@jakobholm1847 2 ай бұрын

Thanks for an inspiring upload again, Floyd! I haven't discovered this synth implementation before. I will have to try it out now.

@mr_floydst 2 ай бұрын

Thanks for watching!

@matthewmillaisgray 3 ай бұрын

Good day Floyd Steinberg, what a wonderful creative video. So glad this was recommended. I loved listening to your demonstration. Phenomenal! Best wishes

@mr_floydst 3 ай бұрын

Thank you kindly!

@tonesthebreakdown7995 3 ай бұрын

Been a good while since I stopped by and sorry for that. But, wow what a great video to return on. This is fantastic Floyd.!!

@mr_floydst 3 ай бұрын

No worries! ;-)

@budgetkeyboardist 3 ай бұрын

It isn't my scene, but I'm still super interested in cool stuff like this. I'm jealous of people who can design and build things like this.

@mr_floydst 3 ай бұрын

Thanks for watching - if you have the time or want to invest time into building stuff, at least it's a very cheap hobby compared to collecting hardware synths ;-) There is a company called Freenove that has a beginners set of electronic parts in a box along with some excellent tutorials and I can't recommend those enough. The other info can best be found on KZfaq. But yes, the ingenuity of some of these DIY projects still strikes me every time, people come up with the most interesting and intricate stuff.

@marcorossi6846 3 ай бұрын

Cool!!! Next step adding a lcd display and a memory for presets! 😁

@mr_floydst 3 ай бұрын

Good idea! Please follow @synthetechs channel to see exactly that happen!

@DawlessHouseMusic 3 ай бұрын

Sweet diy project for sure.

@mr_floydst 3 ай бұрын

Thanks for watching!

@danp420 3 ай бұрын

Think I'm going to try this one

@mr_floydst 3 ай бұрын

Thanks for watching!

@AndrewBeals 2 ай бұрын

The "put everything in a protoboard and then solder the pins on" tip is a great one! I've dealt with a 3rd hand device and tape to get it done in the past - I'll do it this way from now on.

@mr_floydst 2 ай бұрын

Thanks! I lifted that tip straight from Blaine's video ;-) It's really a good idea.

@jakobholm1847 2 ай бұрын

I usually do this using veroboard instead. But being careful with timing the breadboard will work just as well.

@soviut303 3 ай бұрын

Great video and I like your soldering technique with the breadboard. One suggestion that would help amateurs like me is explaining _why_ you're making these connections. While hooking up the midi chip it wasn't clear why you need a resistor or a diode, or what the different legs of the chip did as you connected them.

@mr_floydst 3 ай бұрын

Thanks for watching! You're right, that would add value to my videos - I'll try to do that in future. As I'm trying to push out one video every week at the moment, I have to cut corners at certain points though ;-)

@soviut303 3 ай бұрын

@@mr_floydst Understandable. You don't have to go into great detail, just expand on "connect A to B" with a quick reason would make things very clear. For example, "connect A to B for ground" or "connect A to B to allow volume control from the X", etc. Keep up the great work!

@Synthetech 3 ай бұрын

@@soviut303 I hope Floyd doesn't mind the external link here, but I believe the information you are looking for is here: kzfaq.info/get/bejne/n8-ZgKqJ3N_eoaM.htmlsi=wvXS7FmELhJFcuRC I tried creating Tutorials to explain how the code works but there has not been much interest as it can get pretty complicated and takes a bit of dedication to study and comprehend.

@Comonad 3 ай бұрын

Disagree - that would be electronics 101. It would be beyond the scope of the video, same information would need repeating in every similar video. Instead go watch a video on the basics of circuit components - it’s akin to commenting on a calculus video “woah woah, slow down egghead. Can you explain the concept of ‘addition’ please”

@soviut303 3 ай бұрын

@@Comonad Not why I'm asking; I'm asking for the rationale behind the steps. For example, bad programming tutorials say "write this line, then write this line" while good tutorials say "we define x here so we can use it in our loop here". That's not programming 101, that's explaining the rationale instead of just explaining the steps.

@jam6000 3 ай бұрын

I like that congested crunchy wall of diginess. Reminiscent of the MOS tech sound. Would definitely be worth making a module or 4

@mr_floydst 3 ай бұрын

Thanks for watching! Oh, I guess I have one more thing to investigate, then. :-)

@jam6000 3 ай бұрын

@mr_floydst That would be a fun watch indeed and especially interesting to see if they can handle instrument swapping on a single voice via tracker messages.

@TooSlowTube 3 ай бұрын

Cool. Not wishing to seem pedantic, but it's STM32F411, not ST32F411 (STM not ST). Spelling it correctly makes it easier to google.

@mr_floydst 3 ай бұрын

Thank you very much! No, that's not pedantic, it's super helpful. I copied & pasted all the links and descriptions from my script, thus spreading the mistake all over the video. I've corrected it where possible. Thanks again!

@arcanics1971 3 ай бұрын

Amazing what you can get for 20 bucks! We live in a sci fi future- just not the one I imagined as a kid.

@mr_floydst 3 ай бұрын

We pretty much have all the Star Trek gadgets now, only the warp drive and the transporter beam is still nowhere to be seen.

@6581punk 3 ай бұрын

I still have my Ploytec PL2 (squared) somewhere. That's got a nice grungy lofi sound and even works off MIDI power.

@mr_floydst 3 ай бұрын

Thanks for pointing that out - will take a look at it!

@BoxOfSnoo 3 ай бұрын

I already built the Helios One synth, which is another $20 project - very fun. So I might just have to do this one too! I think I would only do it if I could include some of the parameters on the board instead of having to rely on an outboard MIDI controller.

@mr_floydst 3 ай бұрын

Thanks for watching - I'll take a look at the Helios One, too. :-)

@swirvan 2 ай бұрын

Interesting and efficient enough for me. I’ve been using nano for applications and sound generation modules. gonna investigate blackpill Thank bud 💡

@mr_floydst 2 ай бұрын

Thanks for watching!

@PhilR0gers 2 ай бұрын

That's quite impressive. I'm now thinking polysynth.

@mr_floydst 2 ай бұрын

Thanks for watching! Please follow @synthetech for updates on this project - and I have an upcoming video on that topic. (It may take some more weeks to publish)

@aaronag7876 2 ай бұрын

Great video and very well explained. Can you use this set up to load mp3/wav files and by pressing a button, that is mapped to the sound you uploaded, get an output ? Example. 4 buttons, each has a different sound for a different situation that plays out on a speaker ?

@mr_floydst 2 ай бұрын

Hi, thanks for watching! No, that's not the right box for that. Please take a look at my older video: kzfaq.info/get/bejne/aaebZdJmv6qtaX0.html - this is what you're looking for.

@aGj2fiebP3ekso7wQpnd1Lhd 2 ай бұрын

Nice work. Very Daft Punk Tron

@mr_floydst 2 ай бұрын

Thanks! I don't remember that movie's soundtrack, but need to rewatch anyway. I always thought that movie deserved more praise for it's style and story.

@pablo_costas 2 ай бұрын

Hey, very nice video as usual! Whats the name of those modular midi controllers? they look super cool!

@mr_floydst 2 ай бұрын

Thanks for watching! Check the description ;-) These are "Grid" controllers by a company named InTech - here's a video I made some months ago: kzfaq.info/get/bejne/ar6akrF7zpOYnYE.html

@JDSoundsets 3 ай бұрын

As you say sounds very nice indeed, I may 'try' to have a go at this myself (Non DIY guy) :)

@mr_floydst 3 ай бұрын

Go for it! :-)

@synthlab 3 ай бұрын

Thank you for this, i love it and will certainly try it. Is there any information about the sampling rate and bit resolution of the DAC in this particular setup?

@mr_floydst 3 ай бұрын

Hi, thanks for watching - I guess this video has the answers you're looking for: kzfaq.info/get/bejne/n8-ZgKqJ3N_eoaM.html

@Synthetech 3 ай бұрын

16 Bit stereo at 32Kbps. Same as the old Roland Sound Canvas and other 90's era synths.

@klstay 3 ай бұрын

I would love to see how you might take this particular project from breadboard to "finished" project.

@mr_floydst 3 ай бұрын

Thanks for watching! Please follow Blaines' KZfaq channel (@synthetech) to see exactly that happen. Personally, I'm learning KiCad at the moment (after the friendly folks over at PCBWay counseled me a bit) ;-) I'm also planning to invest my KZfaq earnings into a 3D printer this year.

@trouaconti7812 3 ай бұрын

Hey Floyd, What’s the recording device that can be seen at the upper left hand side at the end of the video?

@mr_floydst 3 ай бұрын

Thanks for watching! That's my Zoom R20.

@3dmaxuser 3 ай бұрын

Very nice Mr S :)

@mr_floydst 3 ай бұрын

Thank you kindly!

@zero.the.prototype 3 ай бұрын

This is really interesting. I recently tried to solder my squishbox kit but it didn't quite work and I'm feeling daunted by desoldering and resoldering better. This kit looks a bit more forgiving and affordable.

@mr_floydst 3 ай бұрын

Thanks! Often, all you need to do is to add a drop of flux to your soldering joints and then reheat briefly. :-)

@worrystone 2 ай бұрын

Second set of eyes in a reddit DIY forum might help you save it. I run a hot iron between joints that are close in addition to the brief reheat. Desoldering only if, eg, a diode, IC, electro cap is in backward.

@Snshne235 3 ай бұрын

Cool! Looks like Stranger Things music , awesome!

@mr_floydst 3 ай бұрын

Thanks for watching!

@Latvian3Dman 3 ай бұрын

Shared to my Twitter firends :) Nice. I am electronics engineer, actually, by education, and, I was hobbying starting around 6th grade at school or so ;-)

@mr_floydst 3 ай бұрын

Thank you very much! That's great to hear! Engineering is a subject that takes a lot of skill and dedication (if you're going for the Bachelor/Master title)

@Latvian3Dman 3 ай бұрын

@@mr_floydst Bachelor in my case. But, that was super long ago :) I am 56 since Friday :D

@mr_floydst 3 ай бұрын

Oh, a belated happy birthday, then! :)

@Latvian3Dman 3 ай бұрын

@@mr_floydst Thank You! 😄

@erickgth 2 ай бұрын

good night, mr. floyd, i enjoyed your video. although the shutter speed of the camera was distracting.

@mr_floydst 2 ай бұрын

Thanks to a sponsorship, I now have a very bright studio lighting setup to counter the ever-gloomy northern skies - so the framerate should be better in coming videos ;-)

@lummsmusik3219 3 ай бұрын

Nice budget synth! I think I have the most parts and have to order for about 5€ to build one 🙂. The next step would be a little pcb and housing. Is there anything out there?

@mr_floydst 3 ай бұрын

Mr. Synthetech just announced he's working on it! (See his channel for more details, I guess) ;-)

@brandnewdan 2 ай бұрын

That reminds me of Re-birth SOOO much.

@mr_floydst 2 ай бұрын

Thanks for watching!

@paulyguitary7651 2 ай бұрын

I really got get me a breadboard for tinkering and experimentation.

@mr_floydst 2 ай бұрын

Please do - at around $2 (or something), it's an investment you won't regret ;-)

@paulyguitary7651 2 ай бұрын

@@mr_floydst I first came to know of them while watching a diy guitar pedal creator some time ago. I thought, that’s nifty. You can plan and layout your circuit (neither of which I’ve ever done) while being able to disable it fairly quickly if if things go wrong. I’m more of a residential electrician so while I can read a schematic I can’t necessarily properly understand it plus you don’t really solder in this trade. Fortunately one thing that does translate, I feel, is troubleshooting which I am pretty darn good at. I’m rambling… Anyhow Ty for the encouragement.

@PocketBrain 2 ай бұрын

Soulder, baby!

@mr_floydst 2 ай бұрын

Yeah I get it, I speak with an accent. As long as the KZfaq speech-to-text bot picks up what I'm saying correctly, I kind of don't care enough to change my ways. Thanks for understanding. :-)

@PocketBrain 2 ай бұрын

@@mr_floydst nobody's wrong! I had a good friend in college from SA who said it that way. Took me back, hearing it. Somehow in the States, the 'L' is silent.

@SuPeRbOmBeRmAn4 3 ай бұрын

that was awesome bro, but how much with aqll the other gear included? 💣💣💣

@mr_floydst 3 ай бұрын

I need that stuff for recording my video, all my viewers need is a MIDI controller and some kind of headphone/audio system. It's very likely my viewership has those at home already. If you're really totally new to synths, a suitable battery powered speaker is around $10 and a MIDI keyboard with some control knobs can be found from $10 upwards ;-) www.aliexpress.us/item/3256805128076352.html

@Synthetech 3 ай бұрын

A MIDI keyboard/controller with 5-Pin DIN jacks is needed. That $10 link was not for a controller, it was for a sustain pedal.. typical bait 'n switch aliexpress listing. They keyboard was $60 and it only had USB connection. 😞

@mr_floydst 3 ай бұрын

My apologies for that. One should never answer mails and comments late at night, it only leads to misunderstanding :-) As @synthetech said. You need a MIDI keyboard if you don't already have one. If a low price is important, search for e.g. the Arturia Keystep on ebay, which has the 5 pin MIDI connectors.

@AndrewBeals 2 ай бұрын

This would make for a nice synth to drive with a wind controller.

@mr_floydst 2 ай бұрын

You're right! Got to give it a try.

@user-zw1fz2pz2i 2 ай бұрын

WOW

@mr_floydst 2 ай бұрын

Thanks for watching!

@jimderino 3 ай бұрын

You should look into the daisy seed

@mr_floydst 3 ай бұрын

Thanks for watching - yes, that's on my list.

@blackrazorus 3 ай бұрын

Another amazing video! Thanks! Has anyone used a Mac to do the BlackPill programming successfully?

@mr_floydst 3 ай бұрын

Thanks for watching! I hope one of my viewers can answer this (I have no Apple Mac here)

@xvxvxvxv7704 3 ай бұрын

I'm not a mac user but you can use STM32 IDE on mac with no problems. You can of course program it without an IDE, but that will be a lot harder for beginners. And if you are an absolute beginner these things support arduino and micro/circuit python. But if you want to go with the python route I recommend rpi pico since python requires more memory.

@xvxvxvxv7704 3 ай бұрын

STM32 IDE supports MacOS. Of course you can program it without it, but it would be super hard if you have no c/embedded experience (With IDE you still have to know what's going on, but it provides libraries and init code generation). If you're an absolute beginner and want to play around these things support Arduino and circuit/micro python. If you opt for the python route I recommend RPi pico, because python requires more memory.

@Synthetech 3 ай бұрын

While I used DeFuse to flash the BP in my tutorial since it was so simple and easy to explain to use.. I have seen on ST's site that DeFuse was replaced with "STM32CubeProgrammer" which does have a Mac version you can use. STM32CubeProgrammer will load "USB DFU" files like DeFuse does apparently. But I have not yet used it myself.

@Synthetech 3 ай бұрын

ST's "STM32CubeProgrammer" for Mac may work instead of DefUse. I chose to use DefUse because it was so simple to explain vs. STM32CubeProgrammer which is used for many formats/methods to read/write to ST products. It's worth taking a look at if Mac is your only option.

@alanredversangel 3 ай бұрын

Im always a bit 'meh' with these types of microcontroller/sbc based synths (except for Dexed stuff) but this one sounds awesome.

@mr_floydst 3 ай бұрын

Thanks for watching! I agree - this one has a certain character, plus every detail is accessible to MIDI CC.

@---nw9qu 3 ай бұрын

Hi, do you have a link to the component tester used to test the resister?

@mr_floydst 3 ай бұрын

Here you go www.amazon.com/-/de/dp/B0BK95J4TV This will not only test your resistors, but tell you what you're looking at (diode, capacitor, resistor...) and if it's still ok

@geraldclark5812 3 ай бұрын

What brand/model is the midi controller you're using to control the synth?

@mr_floydst 3 ай бұрын

Those are "Grid" controllers by inTech: kzfaq.info/get/bejne/ar6akrF7zpOYnYE.html

@TheDjmvt Ай бұрын

thanks for the tutorial. made it on a piece of printboard I had but for some reason my dac isn't working. it does receive the digital input from the blackpill, all lines are checked with a scope but there's no audio on the jack, also no audio on the line out pins. don't know if it's just a faulty dac or some other issue.

@mr_floydst Ай бұрын

Can you test the DAC with another setup? This one is fairly common in DIY projects...

@TheDjmvt Ай бұрын

@@mr_floydst don't have anything to test it. But after making some extra ways to test and measure (a dedicated gnd for the scope gnd and a few jumpers to set sf0 sf1 and mute to either high or low) it must be the DAC itself. The amp part works but it doesn't convert the din signal to proper audio. Did a bit of experimenting with the din straight to the R-out on the DAC and the synth and different keys are recognisable. Going to order me a new one I guess. Glad to make it all swappable on header connectors. Thanks for your help!

@TheDjmvt Ай бұрын

@@mr_floydst Today my new dac boards got delivered and the synth istantly started working :) Just finished making a simple midi cc map for Native instruments Maschine plus so the synth can be used in full effect on the Maschine plus. fun stuff!!

@cholling1 2 ай бұрын

Always nice to see Floyd Steinberg dithering about with synths.

@mr_floydst 2 ай бұрын

Thanks for watching! Yep, if there's only black and white left, Floyd-Steinberg can be very helpful ;-)

@PocketBrain 2 ай бұрын

I'm getting a _Love, Death, and Robots_ vibe here...

@mr_floydst 2 ай бұрын

Thanks! I just hit some keys on the keyboard and changed filter cutoff frequency and resonance, as I usually do. ;-)

@Lion_McLionhead 2 ай бұрын

Surprised the bread board doesn't melt from being used as a soldering jig. Those are a lot more expensive than 25 years ago.

@mr_floydst 2 ай бұрын

It really depends on how long you take to solder. ;-) I don't know how much breadboards were 25 years ago, but you can get them relatively cheap on the net...

@ErichIzdepski 3 ай бұрын

What is the little MIDI control surface?

@mr_floydst 3 ай бұрын

Those are "Grid controllers" by inTech.

@jmatonis Ай бұрын

I'm a total newb and wanted to pair the BP Synth with an arduino midi controller and a keyboard without a pc connected. What would be the easiest way to do this? I've coded the CC numbers into the arduino code but when I connect them together using Y cable it doesn't respond as well as if it's just the keyboard and BP Synth. Any suggestions? Hopefully it's something I can build. Thanks!

@mr_floydst Ай бұрын

Hi, thanks for watching! If I understood your desciption correctly, you've built a MIDI Y cable? I guess that won't work because a Y cable will divide the current (halving it effectively in this case), that's why you MIDI connection becomes unreliable. You need to build a MIDI in for your Arduino and merge the input from your keyboard to the Arduino's MIDI output in software.

@Make573 2 ай бұрын

Do yoy have any suggestions for Arduino? I have Arduino Micro, PAM8403 D -amplifier with 16 ohm speaker, MIDI -input with optoisolator, all connected to power switch and 9V battery place. The only thing I need is a working program, since i want it to work with Alesis Vortex 2 -MIDI controller.

@mr_floydst 2 ай бұрын

Hi, thanks for watching! Arduino by itself isn't the best platform for synthesizers. Please take a look at the Teensy 4.1, which is compatible, but brings enough extra functionality to create fully implemented polysynths. The most promising project that's playable via MIDI I found online is this projecthub.arduino.cc/CesarSound/arduino-midi-poly-synth-minisy-musical-instrument-6ad352 Also, the Mozzi Library sensorium.github.io/Mozzi/

@Make573 2 ай бұрын

@@mr_floydst Thanxs for the info.

@Elberto71 3 ай бұрын

Im looking for a project to use a launchpad mini as a synth controller without a pc, can you help?

@mr_floydst 3 ай бұрын

Hm, I guess Microdexed ( codeberg.org/positionhigh/MicroDexed-touch ) might be worth a look?

@WorksopGimp 2 ай бұрын

Got the right name Cubase user here

@mr_floydst 2 ай бұрын

Thanks for watching! :-)

@davidz2016 3 ай бұрын

This is awesome I'm pretty much in love with this idea but colors are not my friend. I am going to get some one to help me out lol.

@mr_floydst 3 ай бұрын

Hi, thanks for watching - the colors of the wires are chosen randomly here (except for the + / - wires were I sticked to the red/black scheme). All the connectors are labeled, and with a magnifying glass, you should be able to decipher them.

@user-vf4uf7hm3e 3 ай бұрын

what version of blackpill board can use? thanks

@mr_floydst 3 ай бұрын

Hi, thanks for watching! All the links are both in the comments and the video's description ;-) BlackPill is here: www.aliexpress.com/item/1005001456186625.html

@user-vf4uf7hm3e 3 ай бұрын

i mean the variants 8 mhz or 25mgz with add memory or no@@mr_floydst

@mr_floydst 3 ай бұрын

I bought the F411 25M HSE variant.

@calidadautomatica 3 ай бұрын

Bravo 👏

@mr_floydst 3 ай бұрын

Thanks for watching!

@vamoTilin 3 ай бұрын

Only in STM ??? Why not on Pi pico or Esp32? The Github respositorie?

@mr_floydst 3 ай бұрын

I'm only reporting on these projects - I'm sure @synthetech can answer these questions...

@Synthetech 3 ай бұрын

STM32 is what I started with and I have used not only the F411 but also tinkered around with F407 and F405's. The F407 actually has it's own built in 12 bit DAC but it can only swing from 0v to 3v unlike the DAC module in the project that can create true audio at -3v to +3v. Porting between the F4 ST family is very easy.. porting across to Pico and Esp32 would require a lot more effort. I did attempt to post tutorials showing how the code works with links Open Source examples for each tutorial focus.. unfortunately the interest in the Code Tutorials is miniscule compared to the Synth Build vids.

@badfeng 3 ай бұрын

Your channel rules, Floyd. Just sayin'. Always relevant to my interests.

@mr_floydst 3 ай бұрын

Thanks!

@DanHomeAtLast 3 ай бұрын

Would any DAC work well?

@mr_floydst 3 ай бұрын

I don't think so (but perhaps @synthetech can chime in one more time?) You have the choice between the one shown in this video and the PCM5102A, though, see kzfaq.info/get/bejne/gOB2fqpnzq-qnac.html

@Synthetech 3 ай бұрын

I've only tested with the two that Floyd mentioned. @@mr_floydst

@pcka12 2 ай бұрын

Surely you need the midi controller to make this work?

@mr_floydst Ай бұрын

Yes - at least at the moment. The Blackpill has some inputs to read potentionmeters and similar components, so one could add some hardware knobs in theory. Please follow @synthetech here on KZfaq to learn about updates.

@ToyKeeper 3 ай бұрын

I wonder how they sell the blackpill board so cheap. The STM32F4 alone costs more than the entire board.

@mr_floydst 3 ай бұрын

Hi, I'm not sure how the prices can be so cheap overall, but the STM32F411 is cheaper than the whole board: www.aliexpress.us/item/3256806006882616.html

@JohnyPaprikas 2 ай бұрын

What a weird accent, where you're from? Btw, supercool project!

@mr_floydst 2 ай бұрын

This means my efforts to mask my real accent have been successful? :-) ok please guess

@jimbotron70 2 ай бұрын

Imagine what $100 or $200 put in this project would do.

@mr_floydst 2 ай бұрын

Thanks for watching - @synthetech is already planning the next step. Please follow his channel to stay updated!

@thecentralscrutinizerr 3 ай бұрын

AHHHHRRRRGGHHHH! I just bought a Novation MiniNova! .·´¯`(>▂

@mr_floydst 3 ай бұрын

I want to buy a Mininova one day as well, so congrats on you new synth! :-)

@auto_icons 2 ай бұрын

Borat? Is it you?

@mr_floydst 2 ай бұрын

Well, he at least would have been at least as funny as your comment. Here's my macro ---------------------------------- Yeah I get it, I speak with an accent. As long as the KZfaq speech-to-text bot picks up what I'm saying correctly, I kind of don't care enough to change my ways. Thanks for understanding. :-)

@Microtonal_Cats 2 ай бұрын

You could make these and sell at least 50,000 of them for 99 dollars. Probably sell more and for higher.

@mr_floydst 2 ай бұрын

Hi, thanks for watching! I only made the video, the synth is by @synthetech. I think he's already working on the next step to turn this into an actual product, please follow his channel if you're interested in updates.

@Synthetech 2 ай бұрын

You could.. but you'd also have to provide support for your product. Behringer is kinda hard to compete with when they have $49 and $99 synths with mini keyboards and a few controls built in.