This Commodore PET has 3096.01066 bytes free! That can't be right.

Рет қаралды 101,794

Күн бұрын

#commoore #rgb2hdmi #repair #diagnostics
It's time for a Commodore PET repair. This machine has an impossible amount off free RAM and some unusual problems. Let's try to figure out what's wrong so I can figure out how to find the exact problem with this machine.
Part 1: This part!
Part 2: • Let's troubleshoot and...
--- Video Links
RGB2HDMI profiles for the 40 col PET with CRTC: (these will be included in the RGB2HDMI release)
github.com/misterblack1/rgb2h...
Romulator RAM/ROM FPGA based Replacement: (VIC-20 video)
• Replace your 6502 comp...
Commodore PET 2001 Series:
Part 1: • The Commodore PET Rescue
Part 2: www.youtube.com/watch?v=3Jyuk...
Part 3: www.youtube.com/watch?v=Y4BTf...
Part 4: • PET Rescue Part 4 - It...
Zimmer's archive of PET schematics:
www.zimmers.net/anonftp/pub/cb...
Commodore PET Diagnostic clip on ROM:
www.6502.org/users/andre/petin...
RGB2HDMI Github repo:
github.com/IanSB/RGBtoHDMI
Buy RGB2HDMI:
texelec.com/product/rgbtohdmi... (includes the Raspberry Pi Zero)
retrohackshack.com/product/rg...
Adrian's Digital Basement ][ (Second Channel)
/ @adriansdigitalbasement2
Support the channel on Patreon:
/ adriansdigitalbasement
-- Tools
Deoxit D5:
amzn.to/2VvOKy1
store.caig.com/s.nl/it.A/id.16...
O-Ring Pick Set: (I use these to lift chips off boards)
amzn.to/3a9x54J
Elenco Electronics LP-560 Logic Probe:
amzn.to/2VrT5lW
Hakko FR301 Desoldering Iron:
amzn.to/2ye6xC0
Rigol DS1054Z Four Channel Oscilloscope:
www.rigolna.com/products/digi...
Head Worn Magnifying Goggles / Dual Lens Flip-In Head Magnifier:
amzn.to/3adRbuy
TL866II Plus Chip Tester and EPROM programmer: (The MiniPro)
amzn.to/2wG4tlP
www.aliexpress.com/item/33000...
TS100 Soldering Iron:
amzn.to/2K36dJ5
www.ebay.com/itm/TS100-65W-MI...
EEVBlog 121GW Multimeter:
www.eevblog.com/product/121gw/
DSLogic Basic Logic Analyzer:
amzn.to/2RDSDQw
www.ebay.com/itm/USB-Logic-DS...
Magnetic Screw Holder:
amzn.to/3b8LOhG
www.harborfreight.com/4-inch-...
Universal ZIP sockets: (clones, used on my ZIF-64 test machine)
www.ebay.com/itm/14-16-18-20-...
RetroTink 2X Upconverter: (to hook up something like a C64 to HDMI)
www.retrotink.com/
Plato (Clone) Side Cutters: (order five)
www.ebay.com/itm/1-2-5-10PCS-...
Heat Sinks:
www.aliexpress.com/item/32537...
Little squeezy bottles: (available elsewhere too)
amzn.to/3b8LOOI
--- Links
My GitHub repository:
github.com/misterblack1?tab=r...
Commodore Computer Club / Vancouver, WA - Portland, OR - PDX Commodore Users Group
www.commodorecomputerclub.com/
--- Instructional videos
My video on damage-free chip removal:
• How to remove chips wi...
--- Music
Intro music and other tracks by:
Nathan Divino
@itsnathandivino

Пікірлер: 267

@ovalteen4404 2 жыл бұрын

That extra fraction of a byte shows Commodore's dedication.

@colinkraus7139 2 жыл бұрын

I like this comment

@kargaroc386 2 жыл бұрын

that 1/12th of a bit

@mariusberger3297 2 жыл бұрын

I always love seeing a PET getting repaired. I've managed to amass 3 different models (2001, 2001-N and 8032) and am currently restoring my flood-damaged 8032

@josha254 Жыл бұрын

F in chat for it.

@josha254 Жыл бұрын

It's possible that a Mini-PET could be used as a replacement mainboard. I've watched the 8-Bit Guy and I remember he used a Mini-PET board as a replacement

@TheSudsy 2 жыл бұрын

It always reminds me of Computer Studies (1981-3) - the PET was sat right in the middle of the classroom, connected to an accoustic coupler. No one ever sat at it unless there really was no other computer available. BBC B, BBC A, Spectrum (latterly) , ZX81 then the Pet.

@ActionRetro 2 жыл бұрын

Wow, what an ewaste save!

@Fredthefat 2 жыл бұрын

Thanks Adrian, love these fault-finding and repair videos, really appreciate your logical and honest narrations. I learn something from each one.

@DavidKimFX 2 жыл бұрын

This channel is amazing! How do you not have 5-million subscribers already?? Because you SHOULD!!

@oldguy9051 2 жыл бұрын

Adrian's subscribers count is like a number of cat years compared to human years: It's worth about seven times as much!

@DaleDix 2 жыл бұрын

@@oldguy9051 Channels take years to grow a channel to that size - unless they're playing minecraft and a gazillion children subscribe or they're doing something controversial or extraordinary. Even though it may be due, there isn't enough people that used to mumble "38,911 basic bytes free" in their sleep when they were young.

@donmoore7785 2 жыл бұрын

That diagnostic feature of the design is pretty darned cool, and I love how you were able to emulate it the way that you did.

@HutchCA 2 жыл бұрын

The NOROM signal is also used by the Super PET to disable the ROMs for the 6502, when the 6809 CPU takes over.

@quinntechretro4927 2 жыл бұрын

I want to commend you on another excellent job explaining complicated technical things. I took some rudimentary electronics courses back in 2003-04. I love how you try to explain the problem in semi-layman terms. I get a lot of what you are talking about but am a little lost at other times, at no fault of your own. I also want to commend you on your "presentation skills." I see you seem to be more comfortable and fluid in front of the camera. Kudos!!

@watsonac79 2 жыл бұрын

This video sorts me out on the ROM situation for the universal motherboard so much! Can hardly wait for the next video. I am presently in the middle of empirical action on the RAM - new sockets and chips for all. I was fine and got started then one day. 98 bytes free…. Trying get to fiddling around with a Z80 & C/pm daughter board I had hanging out in the lid, an Easter egg when I found my 8032…

@THEmuteKi 2 жыл бұрын

My wife wanted me to let you know we're glad you've given this machine a new home. When it comes to Pets, adopt don't shop!

@truezulu 2 жыл бұрын

Well prepared, nice tempo, very interesting and nicely explained. Thanks Adrian. Such a joy to watch.

@a_Fax_Machine 2 жыл бұрын

It's my dream to own a PET some day. It is daunting though knowing how many issues they typically have though. So I'm glad for videos about how to fix them. Great video as always!

@MyChannel-vm6dw 2 жыл бұрын

I can't tell you the amount of joy I have watching your videos. The respect and care you have for this tech that literally helped shape many of our childhoods is greatly appreciated.

@albinklein7680 2 жыл бұрын

Amazing, that you can still find PETs in the e-waste bin. Nice find and it ended up in the right hands!

@LeftoverBeefcake 2 жыл бұрын

Yes, I'm kicking myself for not thinking of checking our local e-waste companies, there's no telling what retro goodies have passed by. I'd be so stoked if I could find a PET without having to resort to eBay. :(

@WesleyNixon 2 жыл бұрын

I just saw your 3d printed solder spool holder. I printed and use the exact same holder on a regular basis. Nice.

@CDP-1802 2 жыл бұрын

I 3D printed the same one but it's kinda lightweight and the center spindle on mine kept popping out, I ended up trashing it and buying a Hakko 611 holder which is rock solid.

@adriansdigitalbasement 2 жыл бұрын

Heh yeah I've had that little thing a couple years now and it's very handy!

@darkstatehk 2 жыл бұрын

I love the repair vids so much, looking forward to Part 2!

@EgonOlsen71 2 жыл бұрын

What these Commodores do to print out this value is to take the integer value of the bytes free, convert it into a float value stored in the floating point accumulator (some bytes in the zeropage) and then convert that value into a string to print it out. In this case, I would rule out the ram, because the routine basically works, it just gives wrong results. The same applies to the ROM. That leaves the CPU. It can have a minor fault where it doesn't update the carry- or the zeroflag correctly in some cases, which could lead to such results.

@MattKasdorf 2 жыл бұрын

I was thinking the same, plus it's an easy thing to swap out to test.

@kaitlyn__L 2 жыл бұрын

I was wondering where a floating point value would creep into an integer memory count, thanks for explaining that signal chain :D

@milk-it 2 жыл бұрын

Really in-depth diagnosis, Adrian. Good work!

@RetroGamingWithBigSteve 2 жыл бұрын

I occasionally see these go up for sale in the portland area on craigslist. Still hoping to snag one some day. Always fun to see a PET restoration. Great video!

@Inadvisablescience 2 жыл бұрын

The first computer I ever saw was a Commodore PET. I cannot thank you enough for these videos which will come in handy when I get my own classic computers. There's nothing like the real thing. Glad this channel exists.

@MatthiasWelwarsky 2 жыл бұрын

The PET was also my first computer to play with. I remember fondly turning it on and then typing in the question: "who bent the banana?" to which I got the iconic "SYNTAX ERROR" resposnse. What can I say. I had never been close to a computer before.

@kaitlyn__L 2 жыл бұрын

@@MatthiasWelwarsky I have a similar, but later, memory of the DOS prompt in Windows 98 - I typed versions of “die windows”, “kill windows” etc and thought the BAD COMMAND response was a promising sign that it was fighting back. I amused myself for a few days like that.

@SellamAbraham 2 жыл бұрын

Hi Adrian. I appreciate all the general troubleshooting hints you provide in this video.

@frankowalker4662 2 жыл бұрын

Interesting. Can't wait for the next part.

@ralgha 2 жыл бұрын

Very impressive screen capture prowess and chip select trickery. In awe, as always.

@TheClassicsCoder 6 ай бұрын

Your video's are really awesome and in each one of them I have learned something new, no matter how well I know the system. You rock!

@wwsoft 2 жыл бұрын

Very interesting set of issues and diagnostics!

@Charleshawn66 2 жыл бұрын

Another GREAT video as always!!! TY!!!

@Vermilicious 2 жыл бұрын

Impressive diagnostics!

@AlejandroRodolfoMendez 2 жыл бұрын

Good luck with the fixing of this machine. Nice that you recycled before it was too late. I love the pet chasis, never had or seen one irl. I'll like a similar desing but for a modern pc

@twocvbloke 2 жыл бұрын

makes you wonder who thinks "Hmm, this old computer can't be worth anything so I'll just bin it!!" without checking the internet first, but, at least you have it now and is on its' way back to health... :D

@Innochamp 2 жыл бұрын

Love it when someone takes care on these old computers👍🏻

@Dr_Mario2007 2 жыл бұрын

I love seeing the ancient computers revived and fixed as it means a lot when it comes to preserving the last remaining functional piece of history.

@chrisshaw4723 2 жыл бұрын

Another great video, thanks

@DavidWonn 2 жыл бұрын

100.01066% quality video as always!

@haruruben 2 жыл бұрын

this was my first computer I ever used!!!! so much nostalgia, I remember the first time I saw it- it looked like something from the future

@Michael500ca 2 жыл бұрын

I love retro computer videos and I am so glad this one is less than thirty minutes in length. The simple reason for that is I don't have time for videos more than thirty minutes and in my experiences most people don't. Please keep these videos to this magic length.

@Michael500ca 2 жыл бұрын

This is the first time I have been able watch a video on the channel for months since the others were too long.

@8bitwiz_ 2 жыл бұрын

Don't forget that you can save a little time by watching videos at 1.25x or 1.5x speed. But I also don't like watching videos more than thirty minutes long. He found a good stopping point for this one.

@sylwo_28_37 2 жыл бұрын

Hello Adrian. I am an automation engineer, i love to entertain watching Your movies. Your "deduction" path is similiar to mine. Your accent, pronousing is vsry very "understandable". Keep going good work!

@HutchCA 2 жыл бұрын

Nice trick to jumper CS from the Kernal to one of the option ROM socket. I need to remember that one. The Romulator can replace the kernal but not everyone has one of those.

@adriansdigitalbasement 2 жыл бұрын

The biggest issue is programming a 2532. But a simple PCB or hand made adapter is all that's needed to use a 2732 instead.

@VintageTechFan 2 жыл бұрын

"Piggybacking" it on the Kernal should also have worked (but less reliable)?

@ianstorey1521 2 жыл бұрын

What an ingenious way to use the diagnostic chip!

@anders4u222 2 жыл бұрын

I learned to program on one of those... and wrote a program for the local ski center to manage their ski rentals. Had to load it from C-cassette at startup😄

@retrogamingandyou2373 3 ай бұрын

My dad was the principal of a small town K-12 school. The school had Commodore PETs like this before I attended school but the summer before I started Kindergarten they all got replaced with Zenith IBM PC clones. They knew this was coming by June so they went grade by grade asking the students if they wanted a free PET. It took... I think going down to grade 10 but every PET found a home.

@paincreatesfame 2 жыл бұрын

Well we've always been pretty good at recycling in Portland so I'm not shocked that so many school district PETs are still around. We'll always find a way to make old things be useful here!

@m4rgin4l 2 жыл бұрын

I just love how this case opens.

@ProlificInvention 2 жыл бұрын

This is my favorite computer of all time, as a 2nd grader I was the only kid who could program and load games on them, I also got cassette tapes from the regular library and played the games at school. We had 20 or so of them in our computer lab in the early 1980s, my mom was the media center lady so I had free reign on them and it was my thing to be the "computer genius" and geek. I remember some of them had like calculator keys, and some had commodore style thick keys. All had cassette tape drives for data and games of which we had a decent selection of. I also remember we had a few Apple 2Es which were great as we had tons of software, as well as being the first school in the country to get the Apple macintosh in a pilot program. They replaced all our PET computers with them, and I still remember all those computers sitting in a back hallway for a long time and asking repeatedly if I could take one home but was always told no. I actually contemplated just taking one, I can still remember 😆 Those games really were next level on the macintoshes because they had actual graphics, lots of games, even though they were just black/white/greyscale which I thought was stupid.

@PhilR0gers 6 ай бұрын

I remember when the Personal Electronic Transactor (PET) was first announced and would have loved to have one. At school I was using different computers (Research machine 380Z), which had some proper graphics capability, so when I finally got to use a PET, I was quite disappointed. But it's still an iconic machine.

@jeffreyphipps1507 2 жыл бұрын

Yay! Another multipart old computer repair project like the Model II. I love a good miniseries!

@AmstradExin 2 жыл бұрын

I just dreamed of sitting in a Tram, seeing Adrian and through a store window, repairing an old car. I smiled and waved and he smiled and waved back.

@TheEmbeddedHobbyist 2 жыл бұрын

Remember the pet has floating point maths, don't think it does integer maths.

@SentaiBrad 2 жыл бұрын

I'm sure its not the first time you've mentioned you're in the Portland area, but TIL I learned you're local! I'm down in the Salem area, and learning a bit about what is going or on, or has happened in the area is interesting. I always see LGR, RMC and GamersNexus talk about cool stuff near them but they're not local. xD

@RobTheSquire 2 жыл бұрын

Nice to know that some places do auction off old hardware..If I had the space to have an old pc or two I would have jumped at the chance to grab any and max them out and just simply enjoy them.

@jasonc3a 2 жыл бұрын

"[this video's] gettin kinda long" Only time I can recall hearing that on a video from this channel less than forty minutes lol. The disconnect between minutes of unedited footage versus an edited together video combined with how every person perceives the passage of time differently always makes statements like that throw me down a rabbit hole.

@adventureridergirl 2 жыл бұрын

So I just started this video and both of my daughters (1 year old and 2 years old) came running over when they heard your intro music, lol. I think they were expecting an 8-bit dance party.

@d.jensen5153 2 жыл бұрын

4116 DRAMs seem so primitive until I remind myself of core memory and the discrete transistor drivers that were the interface to it. :o

@Psychlist1972 2 жыл бұрын

If you approach one of our e-waste bins at the drop-off here, and don't have something to deposit, they yell at you. I saw some cool Commodore stuff in ours once but they told me to get away.

@tarkhan15 2 жыл бұрын

always nice to get a bonus bit

@AceStrife 2 жыл бұрын

I'm still amazed by hardware working 40 years later. Anything made today seems to just fail in just a few years, or in barely a year if it's a peripheral. Maybe not a complete failure, but degrades in one way or another which affects usage of the product. God forbid you buy something that's a refurb/recert.. those go so quickly. Every time I turn on my computer I worry some part of it will suddenly be dead, especially a storage drive.

@albinklein7680 2 жыл бұрын

Funny, that budget electronics from this era last longer than professional stuff or even mil spec field equipment of the same era, because of the lack of exploding tantalum capacitors...

@thomasoeffling304 2 жыл бұрын

Kids and grown-ups love it so - the happy world of Haribo!

@rottmanthan 2 жыл бұрын

i have a ibm 5150 that was owned by the university of Maine and i live in Maine, so i thought that was cool.

@Jo_Wick 2 жыл бұрын

0:54 this would be a really great out-of-context snippet right here

@Foxonian 2 жыл бұрын

The computer I learned BASIC on in high school back in the early 80's.

@NivagSwerdna 2 жыл бұрын

I was shouting at the screen saying just swap the editor rom with PETTEST but the diagnostic ROM info and NoROM line is actually pretty interesting!

@edgardovigo147 2 жыл бұрын

Very interesting!

@MSmith-Photography 2 жыл бұрын

I kinda wish that I would've offered to take one of my high school's Commodore PETs when they were getting rid of them in the early 90s.

@jamesavery3559 2 жыл бұрын

very nice thank you.

@d455ave 2 жыл бұрын

Back when they were new, I used to repair the older versions of PETs, apple 2 plus, S-100 computers, and the earliest IBM PCs. Chip level repairs, aligning floppy drives, all that stuff.

@SteveMorton 2 жыл бұрын

The PET was the first computer I ever saw!! The one with the original keyboard and the built in cassette 'drive' Yes this was in the mid 1970's! Nearly 50 years ago!

@glonch 2 жыл бұрын

I'm an Apple guy, but your explanation about the Commodores (PET, 64, etc) is very interesting. Well done!

@maxxdahl6062 2 жыл бұрын

@Brandon Taylor Definitely better for gaming anyway. The graphics and audio hardware were absolutely amazing for 1982.

@maxxdahl6062 2 жыл бұрын

@Brandon Taylor Yeah the IIe is definitely better for productivity. my aunt and uncle were Apple IIe people then went to the mac. We had C64 here in my house and then we went to IBM PC's.

@primus711 2 жыл бұрын

Explain how its better for productivity than a c64 ill wait

@maxxdahl6062 2 жыл бұрын

@@primus711 mostly because the Apple could display more columns on screen etc. I'm a commodore guy but apple and IBM were always better for productivity.

@primus711 2 жыл бұрын

@@maxxdahl6062 that's all debatable and c64 could do 80columns in software

@MisterMsk 2 жыл бұрын

I wonder if you could use Bondo's fiberglass resin on the case to go over the engraving and other scratches? Then possibly rattle can the entire case and print a new sticker for the front.

@notneb82 2 жыл бұрын

I've done this before on a TRS 80 that had really deep scratches and a piece of the case broken off. It looks fabulous if you know your way around prep and paint.

@adriansdigitalbasement 2 жыл бұрын

There is a very distinct texture to the case plastic, so I think it would be really hard to replicate although maybe not for someone with a lot of skill?

@notneb82 2 жыл бұрын

@@adriansdigitalbasement There is a simple little trick for plastics with texture. Get a hot glue gun and place a blob of hot glue on the textured surface and place a stick in the glue standing up. Once cooled, carefully peel up the glue with the stick still in it and viola, you have a texture stamp that can be used while the filler is soft.

@DrTofu83 2 жыл бұрын

@@notneb82 Yup. Hot glue or also polyester resin and anything that hardens but stays kinda flexible and can be torn/peeled away without bonding with the texture you're matching. Then you can press it on the filler or even the paint, if you go with painting with several thick coats

@a_Fax_Machine 2 жыл бұрын

@@adriansdigitalbasement you'd have to take a mold of the texture in silicone, and then use that to re-add the texture to any epoxy resin you use to fix the damage. David Murray has a pretty good video from a few years ago about doing that to fix the lid on a Bell & Howell Apple II+.

@RudysRetroIntel 2 жыл бұрын

Excellent video and work. My friend is working on the same motherboard but has a double churp. I have the fw8b diagnostics chip that replaces the cpu. Have you seen it? Thanks again

@svenpetersen1965 2 жыл бұрын

Interesting topic. Doesn‘t the /NOROM signal go to the option ROM sockets, too? That stack thing is weird. Somehow, a stack must be living somewhere else. Because, when you boot up, several subroutines and also the interrupt service routine is called. And that would not work without a proper return address from the stack. Exciting video, looking forward to the next part.

@micheldurieux6430 2 жыл бұрын

Another treasure saved. Adrian to PET: Never gonna give you up, never gonna let you down :)

@plan7a 2 жыл бұрын

I noticed that Rick Rolling in the background also, LOL.

@Vallee152 2 жыл бұрын

I got rickrolled by the CRT in the background XD

@HutchCA 2 жыл бұрын

I need one of those RGB2HDMI. Definitely a useful device

@richardbanks2669 2 жыл бұрын

If you can solder, you can build your own - everything you need is listed clearly in the wiki attached to the project. It's all on GitHub, hoglet67 RGBtoHDMI

@HutchCA 2 жыл бұрын

@@richardbanks2669 I at least need a PCB.

@richardbanks2669 2 жыл бұрын

@@HutchCA The files are all there to order a PCB from one of the cheap internet suppliers - PCB Way, JLCPCB, Oshpark etc - depending on how long you're willing to wait for it to arrive, and what import duties/taxes your government levies, it can cost less than $10. If you don't feel confident ordering a PCB ( and honestly, it's a lot easier than you'd imagine, very user friendly these days) there are people on various forums ( try stardot the BBC micro forum) who make 'group buys' where one forum member will buy PCBs and components in bulk and then ship them individually to anyone who wants a kit, at or near cost price. There are sometimes people also selling kits on eBay, and Tindie, although you never know when they might have stock. Good luck :)

@0623kaboom 2 жыл бұрын

Commodore Pet 2001 and 4032 are what Space invaders was orignally hacked with ... by 6 guys in high school in Canada ... Ottawa to be exact ... . was great fun using the daisy chain network to drive the teacher nuts too when trying to get a program to work for her next class lol . mind all 6 of us had to have our class work done first and each prgram handed in .. of course we had to do the same assignemtn 6 different ways so we wouldnt be called on cheating ...

@cjhickspe1399 2 жыл бұрын

That video bit was awesome. I have a working PET so I've never had to dig into that. Could use some help on the 8050 dual FDD drive though...

@ginkumpow3726 2 жыл бұрын

swap out the PIA and see what happens, they're flaky

@cjhickspe1399 2 жыл бұрын

@@ginkumpow3726 I think it's on the analog side actually. I have two - one with mechanical damage - and the plan was get one working but C= used different revs. I haven't dug into it all the way yet. This video did inspire me to power up the 4032 though and it was satisfying to see that still works.

@mikeuk666 2 жыл бұрын

More Adrian goodness

@kargaroc386 2 жыл бұрын

Just going off of the looks of the machine, I think I can see why a lot of these might've been saved. It has that retro-futuristic look to it that people like. In the 80s when these became obsolete, they could still do useful work, especially with a modem. BBSes probably worked just fine on these. But as their usefulness dropped off, their beauty picked up.

@Pedro8k 2 жыл бұрын

A later version I remember seeing them with the tape drive and chiclet keyboard way back then at schools in the UK before the BBC micro then replaced them

@Quickened1 2 жыл бұрын

Those are genius steps!

@rager1969 2 жыл бұрын

Heh heh, in one of my math classes, we had one PET and two Apple II computers. There wasn't a whole lot of time to use computers but what little time we had, no one ever used the PET.

@UpLateGeek 2 жыл бұрын

Sometimes I wish computers these days were this easy to understand and troubleshoot. It seems like half the work on this was just getting the lid off!

@mondocommodore Жыл бұрын

Very good!! A question, I have many commodore PET/CBM, and some have problem with chip ram. I have see this chip are with 200ms, other 250ms and other 150ms (on different machine) time access. Can I replace all the bad Memory chip ram with 200/250ms time access with chip at 150ms? Sorry for my english

@CanuckGod 2 жыл бұрын

Interesting to hear a (former) Canadian talking about CRTC a lot in a video that has nothing to do with the CRTC 🤣Obviously they have the same initials to the controller chip, but a totally different beast... (For context, the CRTC - Canadian Radio-television and Telecommunications Commission - is our equivalent to the USA's FCC or Federal Communications Commission) P.S. Also don't mean to imply that Adrian isn't Canadian any more, just that he has resided in the US for quite a while now.

@8bittimes 2 жыл бұрын

IIRC the userport on the PET has the video signals. You could connect your video converter there

@rpavlik1 2 жыл бұрын

Fancy! Not sure how many of these you do, but seems like that diagnostic stuff seems like a useful candidate for a PCB that plugs into the socket instead, so you don't have to bend chip legs. But, then you'd have to find chip leg shaped pins to solder into the PCB instead, maybe that's harder than replacing an EPROM after wearing out the bent-out pins.

@rolandkatsuragi 2 жыл бұрын

7:40 I was unaware that the PET could function as a space heater.

@jasonbalicki7948 2 жыл бұрын

Oh, hey. I have one of those portland PETs. Bought it on ebay years ago.

@kittyztigerz 2 жыл бұрын

it would be nice to see some upgrades on that pet pc

@nickblackburn1903 2 жыл бұрын

What's an E way stream Adrian? Destined for recycling? Lovely videos thank you

@timblake5844 2 жыл бұрын

NNNOOOOOO! Oh the suspense! Don't leave us hanging!

@tommylee2k 6 ай бұрын

holy moly, you have an open Haribo-Happy Cola rail exposed on your desktop. that's extremely dangerous! :'D nitpicking just to be a nit picker: 23:40 it's 65536 addresses that can be addressed, 0 - 65535 :P

@microcorelabs7698 2 жыл бұрын

My MCL65+ could also be dropped-in to replace the 6502 which can emulate all of the PET's RAM and ROM. Perhaps not as user-friendly as the ROMulator, but does allow the user to enjoy some acceleration modes such removing 6502 cycle-accuracy and mirroring the RAM/ROM at very high speeds. Could make you machine the World's Fastest PET. :)

@adriansdigitalbasement 2 жыл бұрын

Videos coming soon now this PET is on the bench :-)

@hicknopunk 2 жыл бұрын

Sounds cool!

@EirkenElite 2 жыл бұрын

Best looking pc of all time

@SellamAbraham 2 жыл бұрын

"Stay healthy, stay safe" is the equivalent of telling people to wipe after they poop.

@Okurka. 2 жыл бұрын

The perfect poop doesn't need a wipe.

@emmanuelr6698 2 жыл бұрын

Thanks for sharing, that's very interesting. My first idea was : oh god, what will happen when the CRT's are all dead ? And there was the answer : conversion. Another idea was : what make those IC's fail ? What is the physical reason and is there a way to diagnose it ?? Cheers

@albinklein7680 2 жыл бұрын

Those green, b&w or amber crts last forever if you don't use the PET as a display piece that's turned on all the time. And those all glass crts don't lose their vacuum. I am sure they will still work in 100 years. I actually have some tubes (no crts though...) that are from the late 20s and early 30s and they test good and are still under full vacuum.

@whoisme678 2 жыл бұрын

Those were the days when computers used keys to wind them up 🤫😆. I remember assembling a sinclair zx80. Lol...it didn't work cause I dropped a component and couldn't find it...for a while when I did it finally came to life and how disappointed I was . They said." Flicker free graphics "...lol there wasn't any.😆😆😆😆😆😆

@phillafco1039 2 жыл бұрын

Hey Adrian, I am also from the Portland area. Finally got a job in the last year where I could start to afford to buy some of these vintage machines. Apart from online can you suggest any businesses or resources in Portland for finding vintage computer equipment? Maybe the kind of place where you sometimes get lucky and find something cool for a lot less than the usual eBay price?

@hjalfi 2 жыл бұрын

It was apropos to see you wiring up the PET video to a modern monitor --- I just got a Brother WP-1 word processor, with a really cool letterbox CRT, and it uses the same scheme (16kHz hsync, 60Hz vsync). Unfortunately I don't have any monitors which will accept CGA so I'll have to convert the TTL video signal to VGA's 0.7V. Apparently you can get CGA to VGA converters, but I don't know whether they'll work with the Brother's strange screen size. What happens if you feed 5V into a VGA port's colour pin? Does it explode?

@richardbanks2669 2 жыл бұрын

If you're really lucky you may find a monitor which will work, but with an RGBtoHDMI adapter, you can easily get a pixel perfect display on any modern panel which supports HDMI input - if it's really wide-screen, there are LCD panels designed for car rear view mirrors, or marquee type displays as seen on pinball machines - plenty of strange shaped displays available - which will give you a perfectly sharp image no matter what aspect ratio you need. Common 'unusual aspect ratio' resolutions are often the width of one standard resolution, but the height of a different one, for example 1280x480 or 1920x600, so if your word processor is outputting, say 640x200, that will scale nicely to 1280x400, or display in the middle of 1280x480 with slim black bars top and bottom. The key is finding a panel with a nice integer multiple of the output resolution (or a little larger, RGBtoHDMI can scale perfectly and then apply a 'border' like you used to get on a CRT, to match resolutions perfectly). Good luck!

@hjalfi 2 жыл бұрын

@@richardbanks2669 I have an OSSC on order, which I'm hoping should sync to it. I should add that this is only for workbench use --- the real monitor actually works fine. I believe the format is 640x256 (80x16 characters, each 8x16 pixels). Although now I think of it could just be CGA with a physically squashed screen.

@hjalfi 2 жыл бұрын

@@richardbanks2669 My teardown video of it is here, BTW, assuming the KZfaq automoderator doesn't eat it due to the link: kzfaq.info/get/bejne/aLxiepNhurfZh6s.html

@TechnoTinker 2 жыл бұрын

Years ago I had a 4K TRS-80 Model I which started acting up and would show 0 bytes free when issuing a PRINT MEM statement. It finally got boxed up in the garage when PRINT MEM started showing negative values. I'm pretty sure it's still in Dad's garage, but the last time we looked we couldn't find it.