Buckin, have someone copy the Carlton gauge. Put your name and your own little twist to it, and they will sell like hot cakes!

The sheer joy that you experience when you are with Noel is contagious! Love you all...❤❤❤ Lieutenant Bradley

The joy of two good friends working together, now that makes a great day. 🔥

What skill and experience Noel has. His work has his trademark of quality. This work of art will be enjoyed for many years. 👍👍👍

Can't wait to watch this when I get home from work today!!...OK, GOT HOME - Noel is quite a talented man & has a great sense of humor too! I hope we get to see the pole when it's set up👍 I really enjoy seeing you interact with your First Nation friends, they all seem like people who love life!🥰 & thanks again for the raker tips (you're lookjng extremely fit, young man👍)

My grandpa built an Indian museum in North Carolina still stands to this day I love native peoples culture and heritage thank you Buckin

Awesome video Buckin’! All I do is prune a few trees with my battery Husky but your sharpening videos have made it SO much easier to keep it cutting like new!

Videos worth a thousand words, used this to sharpen my chain for the first time. Waiting for the sun to come up and test it. Thanks BBR

I don’t use guides nor gauges when I file my chains. I sharpen for the cutting point, cutting edge, & I do not forget the gullet. I switch from my round file (running a Husky 572 XP w/ 28” bar, skip tooth 3/8 chain & my current backup is a Husky 61 w/ 24” bar) to my flat file & shave 5 strokes from the raker. Then I roll forward & switch sides till I’m done, with an eye for angles & that pinprick. I try to be conservative on the metal I shave, but I’m not satisfied till each tooth is razor sharp. I’m bucking 2 cords or more per day, & the time to hand file pays dividends 100%! If I’m getting good square chips; not shreds. And I flip my bar whenever I remove the chain, & file down any burrs. I learned all of it by watching Buckin’ Billy Ray & years of daily bucking. Now I love to file! We have firewood to get out to our customers, so it’s imperative to have that razor sharp chain… every time. Greetings from the Bitterroot!

Never stop the sharpening vids❤

I have used those gauges for years, love em!!! Keep on Buckin!

Great wood craft work. Great sharpening teaching. Amateur here in Alabama. Have found often with some tougher woods like hickory, oak or sweet gum, the rakers wear such I only need the round file to sharpen teeth and no raker sticks out over gage when I check rakers. But with easy woods like pine, yellow poplar (aka tulip tree) or black cherry, yep, pretty much all the rakers need adjustment after round filing the teeth.

That was nice of you to help your friend with that.

"Half-smoked"....that is brilliant! What fantastic work, just a beautiful piece of art.

Awesome video Buckin!!! That totem poll is a real piece of art!!

NOLE DOES AMAZING WORK ,,WHAT A GREAT SKILL TO BE ABLE TO DISPLAY,,HOPE HIS SHARPENING WORKS WELL FOR HIM WILL HELP TREMENDOUSLY,,,,YOUR A GOOD MAN FOR HELPING NOLE OUT ,,STAY SAFE BUCKIN ✊✊

I see a lot of trees being cut down that would be Prime for a totem pole or a sculpture. I wish more people would see this. So much talent!! Great advice on doing the rakers. Most people overlook this. I have a small machine and I get to do all my friends chains. By the time they get to me some need a lot of work.

Wow!! Awesome Video Buckin!! I have watched a lot of your sharpening videos. But for some reason everything clicked on this one. 🤔 Thank You!! 👍🏻 👍🏻

Exellent demonstration for filing rakers with the Carlton guage Buckin'!

I just love that sound uncle buckin

I learned so much about sharpening from this video. Excellent work! I would give anything to work side-by-side with you for a season. I would do it for free just to be able to learn a few things. And I’m 63 years old.🙂

Welcome to the new subscribers and a salute 🫡 for the true blues … nice work mate and incredible work by Noel on the totem pole , I still remember the first one you did on the channel …. Love to all ,be kind…K Duff 🤛….😎👍🇦🇺

Wish Carlton still made raker gauges like before. Husky gauges are almost as soft as the Oregon and Stihl gauges. The only one that appears to be made of hardened steel is the West Coast Saw. And with theirs you can set the rakers at four different depths depending on wood you are cutting.

I love meeting your friends and getting the cultural education as well as the sawing education.

Nothin beats a buckin' video at the end of a day

Buckin' doin' the bobble-head dance to the popping exhaust!

Does Noel have a KZfaq channel? My favorite videos of yours are when you visit your Indian friends 🦅

Hey Buckin great to see you and Noel love to see more of him his work is amazing. Love you my brother!

My solution to a dull chain is give it to an Amish friend, then eat some peanut butter pie his wife makes. But on a serious note, I tried an old (4x sharpened) chain on some poplar and maple. You were right it works really nice.

I love the brother hood and friendship between y’all! Much love!

Hey Buckin see what I mean about your passion for people! Your a good man❤

I would like to see Noel doing some carving on his totem.

What an absolute beauty of a pole!

Damn, I just learned some important details about sharpening

What an AMAZING culture. And what an AMAZING artist!

Thank you Billy Ray!

👍👍👍 Wore myself out today on a Chinese tallow, it's not hard wood, but inconsistent density, and very asymmetrical base.

Hey buckin thanks for all you show us and thank you for making me feel normal with my chainsaw addiction lol I’m a husky guy 562 one of my favorites

Thankfully, I get the chance to do this anytime I need to. Very nice life, relaxing, rewarding. Work hard. Get er done.

such an amazing video. love all of em but this one was special. and i learned more about sharpening.

Noel Has It Down To A Science, Thanks For Sharing These Tips ! Have A Swell Day, B.R. Prayers For All Here ! ATB T God Bless

Half smoked! 😂😂

One on one teaching is always the best , I learn with my eyes , you can tell me a hundred times and I still don’t get it , show me once I never forget 👍🇨🇦

Get the gullet Noel

I love your interaction with Noel! You two are connected!! Beautiful friends.

west coast saw carries a very comparable raker gage to the carlton for 3/8 it's a bit thinner, but it is hard steel that holds up to long-term use i've had good experiences with mine

This is a fun one, thank you!

please make a video about carburetor tuning, show what you do in the video, sorry my english is not very good

You can tell you two are good mates… I suspect the banter off camera is very funny… 😁👍🏻

Thanks so much for all the sharpening information you have put out. I have learned a lot from watching you.

Enjoyed the video.

Using this style of raker gauge has changed my entire chainsaw experiences

Hey, sweet totem pole! My whole inspiration in becoming a chainsaw carver was to carve a totem pole. Ive been carving fir four years and havnt carved a totem pole yet. Its not easy to work with giant logs without machinery. My parents named me Forest Otter Thompson and im a white guy. Not sure what they were thinking. But, i need to carve a totem pole so bad its making me crazy. So, i called a guy with a crain, and, im going to get started real soon. Keep up the good work gentlemen! Thanks for the inspiration!! 🙏

NICE SAW! be kind

Proper raker guage is life changing...I bought the Husqvarna one you suggested...life changing i tell ya👍💪💪BBR

Good evening buckin from a barmy evening in wales.

we didn't get to see Noel use the new fangled sharper chain but im sure he's well happy!

IM LITERALLY FILING MY CHAINS RIGHT NOW OMG !!!!!

Great video, enjoyed watching as always, you got it.

Pure gold!!!

Love your videos brother keep em comin. Much love from our family and friends here in U.S. of A. To you up North brother!😎🤙

He says, "unless you want to watch me" 😅 Sounds like quite the character.

People that hangout whit you ..are lucky

needed this raker info. thanks a bunch

I agree with you for the average person but my grandpaw owned a logging company for over 40 years and ive never seen him use a gauge. Saws always cut like butter and straight

Monster saw!!!

Do different size chains use different size taker gauges?

Amazing totem pole 🥰

I love the Indian…and the buckin

Love you my brothers

Nice 😊😂😂😅👍

Awesome work! Thanks for your excellent instruction 👍🏼❤

Tell me Ganges. So I climb eagle aerie. When wind took them down. I cried 😢

Cooool UFC

What do you do if you have safety chain breakers that are l shaped?

cool totem pole.

Wow

the strong mittens 😅😂 15:27

With a skip tooth chain, what's the raker gauge of choice? My Husky raker tool is great on a regular chain.

The brake on my husky 55 rancher keeps popping back on when I try to put my hand on the handle. It's like something got out of whack and now there's not enough space for my hand. Wish I could describe it better. Can't find a lick of info to something similar online.

Not only entertaining educational as well! I always enjoy your posts! God bless bro take care! OZ

Hey billy how come you always pull the starter rope out a bit when you shut the saw off ?

As an east coast gut I'm also use to going on to.little things!!!

Wicked sharp !!!-

Always learning.

Would like more on that last pipe and if youve dynoed it. Looks similar to mine that you wont run for some reason. Yes i like that tell if where to go just like the gullett

My totem bear, 🦅, fox and wolf

Great job of squaring her up Buckin...

Hi Buckin I run skip tooth a lot on my 462 when I’m Buckin

Hey brother, might there be 572 pipes for sale on the merch page in the future once ya get it perfected? I like where you're going with this! Great video, nothing like hanging out with a good buddy. Love ya!

the gauge i have really doesnt allow 45. but if you pin the raker toward the file it works almost as good. just before he asked i was headed to the search bar for the style you have

He has some solid work eh. Damn.

Love it

@BuckinBillyRaySmith can you make a video about how depth guage's interact when filrd at an angled vs flat?

👍✊

Buckin, where can I buy a raker gauge like you're using?

Tooth can cut if theres basically a raker preventing it from biting.

Get that gullet people

How many filings do you get out of a file

Hello Buckin 🪓