This fan DOES wobble

Рет қаралды 2,126,446

10 жыл бұрын

oO FYI- sarcasm is no longer used in title.
"""" Also, the 3rd pullchain is for reverse. All ceiling fans in Canada that were made before about 2000 have a reverse pullchain.
I had to JB weld the blade brackets... didin't do the best job at making them balanced.

Пікірлер: 443

@hobbycentral3516 Жыл бұрын

THE THIRD PULLCHAIN IS FOR REVERSE!!!!!!!!!!!!!!!!!!!!!!!! idk it a canada thing

@CRAIG86 5 ай бұрын

why cant it just be a swich like a normal fan?!?!?!

@hobbycentral3516 5 ай бұрын

@@CRAIG86 I'm assuming Because a chain is way easier to reach than a switch that you need to set up a chair or a ladder to reach

@CRAIG86 2 ай бұрын

@@hobbycentral3516just stand on your bed

@xangriffin8564 2 ай бұрын

Where was the fan made

@Sirawesomej904 Жыл бұрын

0:56 "Da da da oh don’t mind my fan!" Got me rolling on the floor laughing. Lol😂

@tomcollett1893 4 жыл бұрын

Naturally, the reason ceiling fans wobble like that is when the blades aren't fully aligned, which causes that rotational imbalance. Even if one of the blades was slightly out of alignment (as in a few millimetres), that can still happen. One way of finding out which blade is out of alignment is you start the fan up for a few seconds and then turn it off, and then go and stand somewhere where you can align your eyes with the tips of the blades and the corner of the ceiling, standing as still as possible. You should be able to identify which one of the blades is slightly out of alignment and then you'd be able to straighten it.

@xangriffin8564 2 ай бұрын

Helpful

@supermarnies 9 жыл бұрын

The Other 2 Fans are Like:... WTF.

@seth6525 4 жыл бұрын

ikr XD

@Zsullivan27 3 жыл бұрын

0:59 I don’t know why but this part makes me laugh every time. 🤣 LOL

@kathleenhome5546 2 жыл бұрын

It’s like the fans are annoyed at what the guy said 😂

@PorterTheFanCollector Жыл бұрын

I know right?! 🤣🤣🤣

@aliciajones1035 3 жыл бұрын

lol that wobbles like crazy

@dkintana 7 жыл бұрын

What Type Of Ceiling Fan Is That? December 3 2016

@Tylergage07Productions 3 жыл бұрын

This video has aged like fine wine

@victorlitwinko9502 3 жыл бұрын

0:46 sounds like a train

@finneganthao9164 3 жыл бұрын

Yea

@mollyballiet1407 13 күн бұрын

Same

@Kasey1776 6 жыл бұрын

That’s balanced very well!

@hobbycentral3516 6 жыл бұрын

I know right!

@Kasey1776 6 жыл бұрын

What kind of fan is that by the way? It’s a nice fan.

@hobbycentral3516 6 жыл бұрын

It's a Nadair . I don't know the model name/number. It doesn't have any stickers on it.

@Kasey1776 3 жыл бұрын

Yes

@firealarmtechguy4444 3 жыл бұрын

@@hobbycentral3516 Encon Princess Knockoff

@dkintana 7 жыл бұрын

Why are the blades going from left to right? December 3 2016

@pcorf 5 жыл бұрын

One of the blades is badly out of alignment because of bent blade holders. Maybe before you installed the fan, the fan was stored blades down and over time it warped the blade holder.

@LuckyTheWolf69420 4 жыл бұрын

Imagine that fan on a downrod!😨

@seth6525 4 жыл бұрын

yikes!

@ACFC.1000 4 жыл бұрын

That would be scary!!

@daprosceilingfans4221 2 жыл бұрын

😬😬😬

@BRISTOLFORCE2009 Жыл бұрын

I’d be terrified

@caitoschannel3562 8 ай бұрын

It might fall😮

@torythefanman 9 жыл бұрын

Surprised it did not fly off there..LOL

@hobbycentral3516 9 жыл бұрын

***** Lol I was surprised none of the blades flew off lol They just randomly fell off while it was sitting unused during the summer, I walked in to get something and they were just sitting on the floor.

@torythefanman 9 жыл бұрын

LOL! wow. thats funny.

@GoneForGood22 6 жыл бұрын

look at ryan's bar and grill there's is 10X as bad as this

@seth6525 4 жыл бұрын

@@hobbycentral3516 good thing the fan was off becuz if i t wasn't (X_X)

@catsbyondrepair 4 жыл бұрын

Jb weld sucks

@dkintana 8 ай бұрын

What does the thrid pull chain do on the ceiling fan? November 3 2023

@hobbycentral3516 8 ай бұрын

3 words. R e a d T h e D e s c r i p t i o n =D

@fanssmoothiesandantiques7443 2 жыл бұрын

I love fans that have a reverse chain

@PorterTheFanCollector Жыл бұрын

Very rare and cool features to have

@therealbowser3339 7 жыл бұрын

It's the most balance fan in the world

@hobbycentral3516 7 жыл бұрын

Finally somebody who understands!

@TheFanUniverse 6 жыл бұрын

Hobbycentral LMAO

@dannycubesnfansproductions3217 2 жыл бұрын

Nadair: i'm going to make the Canarm Unity and the Galaxy's blades wobble Canarm Galaxy: HOW DARE YOU NADAIR Canarm Unity: WHY DO YOU WANT OUR BLADES WOBBLE? Nadair: because is for fun The two Canarms: THAT'S IT! I'M TELLING SOMEONE TO TURN YOU OFF!

@Account-mc8sr 10 ай бұрын

Nadair: NOOOOOOOOOOO!!!!!!!

@ventiladorcarreras8244 6 ай бұрын

The two canarms:YESS WILL CALLING TO OFF you >:)

@wesleysceilingfanjoint5255 5 жыл бұрын

Even though it's so wobbly it's kind of nice fan

@thatonelonelyeagle5398 4 жыл бұрын

Woah this is an interesting fan the housing spins with the blades!

@hobbycentral3516 4 жыл бұрын

I believe they are known as "spinner" ceiling fans

@hobbycentral3516 4 жыл бұрын

definitely an interesting design though

@asgharmoheuddin1301 3 жыл бұрын

@@hobbycentral3516 tyllrlllgLapg

@PorterTheFanCollector 11 ай бұрын

Appears to be a spinner with round tipped blades

@tyronlemons5203 Жыл бұрын

2:09 "my light doesn't like the wobbly fan" most fans are like that mine for example I'd have to replace the bulb in about a month and the other ones are fine and I have a harbor breeze Mayfield

@mollyballiet1407 3 күн бұрын

What’s the finish of your harbor breeze mayfield

@tpirman1982 9 жыл бұрын

That's very wobbly.

@Umarbeksmegatemplate 8 ай бұрын

Hampton bay elsathedano ceiling fan

@taronjeroneharris1313 3 жыл бұрын

If you straighted up that one blade on there, that should cut down on the wobbling. The reason why it's doing that is because with that blade being bent like it is, it's causing the fan to be out of balance. Other than that's it runs good.

@hobbycentral3516 3 жыл бұрын

No it wobbles because it's cursed! lol check it out with new brackets in this newer video of it kzfaq.info/get/bejne/e66Gp8-nu7PGgX0.html

@connermichel837 9 жыл бұрын

That too wobbly

@MogamiK32 7 жыл бұрын

Conner Michel I think that's an encompass princess from 1984

@connermichel837 6 жыл бұрын

PineappleTurddle But with different blades, light shade, and Blade braket

@jackwiley7961 6 жыл бұрын

0:59Told you we shouldn't have let him come over.

@silent7563 6 жыл бұрын

Jack Wiley LMAO

@seth6525 4 жыл бұрын

@Turbofanman13 4 жыл бұрын

Charlam galaxy: dude why is he here SMC Laguna: he wanted to come over Encon princess: y7stsyray7tstisyodsr

@anshitaa.srivastava100 4 жыл бұрын

Thanks

@seth6525 3 жыл бұрын

@@Turbofanman13 XD

@conorodonnell8142 4 жыл бұрын

The ceiling fan is so wobbly because the blade is bent and the light kit globe is shaking on the ceiling fan. And the ceiling fan pull chains are banging onto the ceiling fan fan light kit globe.

@ZappingHero 10 жыл бұрын

0:40 - 0:55 lol, I remember doing that on my video of my Hampton Bay Farmington controlled by the slide dimmer (back in June of 2011), only I did just regular, sped-up and slow-down on my file (I took when I accidentally broke the chain off).

@hobbycentral3516 10 жыл бұрын

lol I remember that vid, and yeah I liked how it sounded slowed down twice

@ZappingHero 10 жыл бұрын

Oh and I like the effects at the end too, lol. :D

@hobbycentral3516 10 жыл бұрын

ZappingHero yeah I thought I would do something to make my vids stick out a little, so I thought I would throw in trippy stuff like tht lol

@brentfisher902 3 жыл бұрын

You should overclock the motor and put car balancing weights on it to make it wobble so quickly it falls off the ceiling.

@hobbycentral3516 3 жыл бұрын

That would actually be pretty entertaining!

@Account-mc8sr 10 ай бұрын

But that would break it don’t

@IHAP563 6 ай бұрын

You will need a new blade set as well as you will need to tighten the fan

@samlarkin1810 8 жыл бұрын

I once had an industrial fan in my room and it was literally hanging by the wires it was so wobbly that the people that moved in afterwards didn't know that it was so wobbly that it fell down.

@ThatSkyKyle 2 жыл бұрын

Oof…that must’ve been terrible…did they get a new fan? Because when one of mine fell I got a replacement fan

@abpp1 8 жыл бұрын

it dose wobble!

@randomperson7443 Жыл бұрын

What model fan is in between the other two? My grandma had a fan like it that fell down in her bedroom, except hers was brown.

@hobbycentral3516 Жыл бұрын

That is a Canarm Unity. it fell? hopefully it wasnt on top of her bed

@randomperson7443 Жыл бұрын

She also had the 3 Chain fan in her dining room, but hers only had 2

@mtgau2000 5 жыл бұрын

LOL THE CEILING FAN WOBBLES BECAUSE ONE OF THE BLADES BENT UP BUT WAIT I LIKE YOUR VIDEOS

@Gambonnerfans 4 жыл бұрын

I wanna see this thing on a down rod with no set screws

@hobbycentral3516 4 жыл бұрын

That would have been epic

@ACFC.1000 4 жыл бұрын

Do a video of the same thing but the really bent looking heritage ceiling fan

@hobbycentral3516 4 жыл бұрын

maybe someday

@fansambulancesrobloxandmor6894 6 жыл бұрын

This fan wobble

@theceilingfanguy4041 7 жыл бұрын

can you make a nother vid of this fan and make it reverse

@hobbycentral3516 7 жыл бұрын

I would, but 2 of the blades broke off and I'm not brave enough to run a ceiling fan with jb welded blades anymore lol

@jacksonproducedit352 9 жыл бұрын

That is one messed up fan right there.i am glad that's not in my house

@hobbycentral3516 9 жыл бұрын

Yeah it's quite a hazardous unit. The funny thing is I used it for probably a month on low after this video and the blades never fell off, but when I went back into that shed in the fall two blades were snapped off and laying on the floor.

@katthefanenthusiast5793 9 жыл бұрын

Hobbycentral !

@jazziegee5964 9 жыл бұрын

Hobbycentral you should get a Hampton bay glendale

@katthefanenthusiast5793 9 жыл бұрын

He could have pput a better fan there.

@hobbycentral3516 9 жыл бұрын

Kat Fan I definitely could have, But I wanted to see how good the jb weld would hold up.

@dkintana 7 жыл бұрын

2:11 My light doesn't like the wobbly fan. December 3 2017

@gqinc1202 6 жыл бұрын

i think i see the problem the fan has an extra pull chain on the light kit

@seth6525 4 жыл бұрын

OH YEAH WHY DIDN'T I THINK OF THAT?! XD

@MrBonanza747 2 жыл бұрын

0:49 the fan song

@emmanuelyates678 Жыл бұрын

It probably need need a glued on the ceiling fan from wobbling

@roshanr16896 4 жыл бұрын

Why does it have 3 pull chains

@joshd8624 7 жыл бұрын

don't worry guys it won't fall!

@seth6525 4 жыл бұрын

yeah totally!

@Tap721 2 ай бұрын

Thing shakes the whole building lmao

@CajunBeauty1 7 жыл бұрын

the fan needs to be replaced it wobbles so much

@imaxdjdbdbdbdb4954 3 жыл бұрын

That fan is so similar than mine

@SunshineRoblox-ch4up 6 жыл бұрын

wow the fan shakes too hard that it causes the other fans to wobble too☺

@seth6525 4 жыл бұрын

yep XD

@sunshineofepicness1815 3 жыл бұрын

OMG Hi old account

@stevensteele249 Жыл бұрын

Very Pretty Fan

@REALMichael2011 3 жыл бұрын

This is like my old Ceiling fan that I had since I moved in my house One day it was leaning when I was sleep and in the morning I took it down and got a new fan in my room Then I put the old fan and hooked it up in the garage and it works!

@hobbycentral3516 3 жыл бұрын

Nice!

@User112-y8i 10 ай бұрын

If u were wondering the third chain is for reverse and forward

@IamCollector155 3 ай бұрын

Yeah

@user-mh8gr7tu4j 2 ай бұрын

10 years!

@SuckleV2 8 күн бұрын

Wtf am I doing here

@rrgvideos6556 2 ай бұрын

This was my child hood video🥲

@jamesnguyen4034 4 жыл бұрын

Like that fan

@thatretrocattt 5 жыл бұрын

That does look quite unsafe to be honest.

@GrandTheft60116 3 жыл бұрын

This Fan Is Dancing Hahahaha

@malachistar 7 жыл бұрын

That's a fast wobble

@williamcase1514 6 жыл бұрын

It's pretty wobbly

@prestontowne7200 3 жыл бұрын

I wouldn't have that much wobble on my fan. It makes me not like that fan, but it can also be fixed.

@hobbycentral3516 3 жыл бұрын

Yeah it's not very practical lol;

@rosarioaceves235 4 жыл бұрын

Need new one right away!!!!

@TravellerCarlos 8 жыл бұрын

It wobbles!

@YummyHappyKikiTheCat 3 жыл бұрын

@sunshineofepicness1815 3 жыл бұрын

@@YummyHappyKikiTheCat wat are u doing outside the safe place.

@alyssaschannel699 6 жыл бұрын

What's a there pull chain on the fan you didn't touch

@hobbycentral3516 6 жыл бұрын

Thats the self destruct pull chain jk it's for reverse

@REALMichael2011 3 жыл бұрын

Is that an attic fan?

@legocamcam8450 4 жыл бұрын

I have that same fan in my den

@Mrs.Glendale 9 ай бұрын

abandoned ceiling fan

@tylonbarnes9678 8 жыл бұрын

ey one of the blades kept going up and down why is that?

@hobbycentral3516 8 жыл бұрын

+Tylon Barnes Because they are horribly off balance lol

@ltg6686 Жыл бұрын

What is with the 3 pull chains

@hobbycentral3516 Жыл бұрын

it is for reverse

@retroelectronicnerds9482 5 жыл бұрын

nice that you woundnt need to get a stool and reach up on the side of the fan to switch it. When people actually have good ideas...

@joshd8624 7 жыл бұрын

old fan?

@ssakamag 3 жыл бұрын

dancing ceiling fan

@Varkyorsomethingstupid9963 4 ай бұрын

Remember when this video was called this fan doesn’t wobble

@CajunBeauty1 7 жыл бұрын

you know you can get new brackets for this fan that blade is bent almost to the ceiling yep it need new brackets

@ventiladorcarreras8244 6 ай бұрын

Fan 1:im bored i have an idea i play the wobbly fan Fan 2:Wobbly fan?!!?? Fan 3: WHAT??!!! Fan 1: ON ME PLASE ONE SECONDS LATER... Fan 2 and Fan 3: THATS IT !!!! WILL OF YOU!!! Fan 1: NOOOOOO!!!!!!!

@calvinmayo7990 2 жыл бұрын

wwwoooowww that is wobbling SSSOOO much

@PorterTheFanCollector Жыл бұрын

The reason for all shaking to the other 2 fans is that it is a flush mount install. If it had a very short down rod instead, the shaking would not be as effective on the rest of the room.

@livionaves 8 жыл бұрын

That fan has a terribly bent up blade, no wonder the wobble is so bad. It has stencil blades? What is the name of this fan?

@hobbycentral3516 8 жыл бұрын

+Maverick 3458 Yeah I didn't make sure they were balanced when I glued them lol. No the blades don't have any stencil, and It's a Nadair something or other, I cant remember the model number

@Ceilingfans94 8 жыл бұрын

+Hobbycentral LYER!!!!!!!😡😡😡

@TravellerCarlos 8 жыл бұрын

+AdamTubefans47 Did You Mean Lier?

@ThatTexanCollector 7 жыл бұрын

Both 'y'all wrong it's Liar

@ThatSkyKyle 2 жыл бұрын

A three pullchain fan…my three pullchain fan had an upper light

@ilovefans-x1m 6 ай бұрын

Grayton?

@TOPGamesYT- 4 жыл бұрын

I don’t know how to say it but you know what you mean by my fan

@AlansTutorial Жыл бұрын

It sounds like a freaking tractor more like a American steam engine

@spirit861 3 жыл бұрын

I didn’t know how the fan could wobble the blades on that other Hampton Bay Littleton I THINK

@hobbycentral3516 3 жыл бұрын

It was shaking the beam that all those ceiling fans were mounted to. the beam was actually barely even nailed down lol. just so you know, the other smaller ceiling fan is a Canarm Unity, and the other larger fan is a Canarm PF-42

@charlesthefanboy1317 6 жыл бұрын

My crosswind hums like hell

@seth6525 4 жыл бұрын

smae to my hampton bay grayton 2

@kalebmelancon854 7 жыл бұрын

It wobbles

@LuckyTheWolf69420 4 жыл бұрын

Now that's what I call Walmart quality!!!! (I think) 😂

@blanchonqc5716 3 жыл бұрын

The blades were welded badly

@mtgau2000 4 жыл бұрын

DA DA DA DA Oh don't mind my fan!

@connorsceilingfanworld1905 Жыл бұрын

Yeah 🤣

@garyjones8752 4 жыл бұрын

That’s a Hampton bay graton

@NickTubeFans 4 жыл бұрын

No it isn’t. Hampton Bay Graytons are different.

@sunshineofepicness1815 3 жыл бұрын

@@NickTubeFans Hi :3

@TheCeillingFanAndAcKid44 2 ай бұрын

Guys put the vid on 2x it's hilarious 😂

@FanOfCars2006 4 жыл бұрын

Wow three pull chains pretty rare.Mostly they would have one or two

@PorterTheFanCollector Жыл бұрын

The other was the reverse chain. They were used before the switch was invented.

@washing_machine_guy 9 жыл бұрын

I saw a couple of blades were higher than the other

@jostingonzalez7938 5 жыл бұрын

UI uuuuu

@Syd693 6 ай бұрын

You could get enough air by that

@lennongroover4189 4 жыл бұрын

You need to just carefully bend the blade down with out breaking it or just replace the whole blade

@hobbycentral3516 4 жыл бұрын

I have long since got new brackets for it lol

@redacted2051 3 жыл бұрын

is there one for sale? i need one for my bedroom

@hobbycentral3516 3 жыл бұрын

None of mine are for sale, if that's what your asking. If your wondering if there is one for sale somewhere on the internet, I dont know lol. plus if you dont live in canada, then you probably wont be able to find a Nadair unless you pay a probably insane amount of shipping. Although if you just like the style and dont care about the brand, then I believe hampton bay made a model like this. the greytyon I think?

@hobbycentral3516 3 жыл бұрын

Update: I goofed up there, I meant Encon Princess, not hampton bay grayton