Corn flour in a fine piece of cotton will work the same as an anti static pad. You can also add another layer of embossing powder over the top whilst it's still warm, it will stick without stamping. Reheat and you'll get a smoother look. I love these even with the little unintended parts. So glad I've found your channel thanks for the fun and ideas xxxx
@LisaVornhagen9 ай бұрын
Those are so pretty! I love silver and white, too.
@sandyramsthaler49249 ай бұрын
They are beautiful Claire, you can think of that "channel " as a tree trunk. Paint some.thin branches and you have a winter tree lol
@ilsabailey81959 ай бұрын
They are fantastic and you have truly unique pieces there totally one-of-a-kind
@mizzuzie33389 ай бұрын
They are stunning! The snowflakes were a great addition and somehow give the coasters a more finished look.
@kathrynseaman64829 ай бұрын
love the added detail with the embossing
@thatsamazinggrace95129 ай бұрын
and we miss you!!😁 The coasters still turned out beautiful!❤
@SkitchBean_aka_Christine_E9 ай бұрын
Wonderful video and I love the coasters.❤❤❤ Glad you are back.
@antonietta28749 ай бұрын
They are pretty. Love the white and silver.
@Jellybean_Craftz9 ай бұрын
Thank you 🙏 Claire for a fun video and chat
@Kathy-Carr9 ай бұрын
I think you had great saves and they turned out very pretty! Thank you! ❄️
@kazbeazley80m959 ай бұрын
Stunning as always. We missed you too xx
@MizJaniceResinArt9 ай бұрын
I love silver and white for Christmas! I usually end up adding a touch of blue as well. These turned out great.
@lindawood29469 ай бұрын
Re embossing - baby powder in a piece of fine cotton is ok to remove static, plus, a specific embossing ink that is stickier will give a smoother emboss. I love this idea.
@heatherhazzard50359 ай бұрын
Or cornflower is good too xx
@valeriebigley87599 ай бұрын
Looking forward to more silver and white 🤍
@coloursofangels9 ай бұрын
Awh Claire, I loved that.....I was thinking....and I know....before I say it 'you hate sanding' 😂😂 but could you maybe sand the jesmonite lightly as it approaches the resin, I don't know if this is making sense, but at an angle so there isn't a step if you like or channel as you called it, I know it's too late for the ones in this video but for the other two maybe? Hahah I don't know.....😂😂 But totally loved how these turned out, 😍 ❤️ everytime I watch your videos I'm like, oh no I need to buy that now haha 😂😂
@Coyo-Tea9 ай бұрын
Tumble dryer sheets will remove static Clair. I loved the deer they looked fabulous ❤
@marthal25819 ай бұрын
Beautiful as always ❤❤❤❤❤❤❤
@kimclayton58149 ай бұрын
These are beautiful! I love the channel in these!!!
@karenlloyd169 ай бұрын
The deer stamp on the coasters is just so cute. Love them
@roscoefranklin63059 ай бұрын
Wow just amazing!
@dianescraftycreations9 ай бұрын
Great save!!
@joanstone41629 ай бұрын
They turned out great
@roygarcia41769 ай бұрын
I think they’re gorgeous!! The channel looks good!!!
@mandymcclay9 ай бұрын
beautiful 😍 and if you are using new stamps you actually need to prine them to remove the factory residue, and the easiest way is to rub them over your skin till they dull, its that easy it give a surface for the ink to completely grab then the embossing wont be as dotty xx
@sudhagupta44589 ай бұрын
Gorgeous creation,Ms Claire 😍💜,love the embossing on the deer,and that canal made a huge beautiful difference to your coaster,Ms Claire 😍💜
@mole14619 ай бұрын
They are beautiful. The texture of the embossing makes it look hammered 😀❤️🤗
@evemercier34609 ай бұрын
Hi Claire! I like the canal, it gives it a little something more
@lisaburnham71519 ай бұрын
These look beautiful! They will look very pretty hung on your tree with a silver ribbon.😍
@Richiedei509 ай бұрын
The embossing reminds me of a pewter effect. Lovely.
@rosemariediamond59489 ай бұрын
Even when you have an oops! the final result is gorgeous
@petragerbracht9 ай бұрын
Loving what you did. Brilliant Claire 🫶
@LiveItLikeLisa8 ай бұрын
I love the embossing!! I’ve got some of that stuff in my scrapbook stash from about 20 years ago and never used it!! lol really love the effect it gave the reindeer so pretty
@ClairesCraftyCorner8 ай бұрын
Ohhhh thankyoooooooo hunee oooo you must try it one day 🤩🤩 its so much fun xx
@dandaresin9 ай бұрын
I still love these regardless of the "canals lol" I do appreciate the fact you post errors made. Makes you only human and shows other crafters that mistakes happen to even the most experienced ones.. keep up the brill work claire. Look forward to your next upload xx ❤
@resinartists9 ай бұрын
Although that canal appreaed between the 2 chemicals, it made it even more unique and beautiful, Ms Claire. And you saved it beautifully 😍 💜,love that deer stamp,the textured embossed effects on it,just looking like a wow 😍💜
@artlessordinary9 ай бұрын
i really love how hey turned out , the channel in them looks kind a cool
@maddieadams759 ай бұрын
Very pretty. ❤
@CynthiaPrice799 ай бұрын
I happen to really /like/ the “channel”! I think it adds a ton of textural interest to the piece, and really appreciate the aesthetic of making it silver! These are so elegantly simple and gorgeous!
@patriciaharkin15719 ай бұрын
They are gorgeous Claire despite or because of the irrigation ditch. 🥰🥰
@alisonmary14439 ай бұрын
Still turned out so pretty, I like how you continue and not bin the mistakes 👍I'm a binner but not now.
@debranewbigging6419 ай бұрын
They're both beautiful, Claire 😊❤
@belindagalle979 ай бұрын
Thank you 😊
@isabellrc9 ай бұрын
I haven’t used embossing. This was great to watch. I love silver… Silver with lighter blues are also lovely for the holidays.
@tinacluff27939 ай бұрын
I like them even with the channel.
@genevafraser58599 ай бұрын
Absolutely gorgeous Claire love them❤❤❤❤
@patricialamson79449 ай бұрын
Hi Claire💜 I love them you did a great recovery. No one would ever know!!! 💜
@dawncoleman4709 ай бұрын
Great save Claire, a pretty, organic look to them. I have never used jesmonite, so I have no advice what so ever 😂 x
@michelle_resinrebel9 ай бұрын
Hi Claire these are so beautiful 😍 im with you love white and silver, thanks for sharing ❤❤❤ xxx
@susanagnew87683 ай бұрын
Those are sooooocooool😊
@sweetpealee0569 ай бұрын
Love the sparkly silver Claire! Very pretty!
@debrasmith37649 ай бұрын
Gorgeous just gorgeous even with the channel ! I love ❤️ the silver & white theme also for Christmas 🎄. I realize that this is not what you planned however you pivoted so graciously. You made an oops into gorgeous coasters. Thank you Claire !
@bltigger26449 ай бұрын
I actually decorate my tree with pearl white and silver and small Spitz of red velvet! Idk why it just feels right for me. I put white lights on it and color lights in my windows with some trimmings.❤❤❤❤
@laineykearns45069 ай бұрын
These ended up quite lovely despite the issues! I don't have an embossing bag either but I use an ankle sock filled with talc and that works for me.
@sarahthurlby35569 ай бұрын
stunning going to nick this idea xx
@slfaina9 ай бұрын
I’ve never done embossing or even stamping but this video may encourage me to try. They are gorgeous! I’m going to check all in your shop too. Thanks Claire!
@CreatingwithWinglessAngel9 ай бұрын
Very beautiful 😍
@sylviakelly49439 ай бұрын
They turned out out beautiful. You know if you use a dryer sheet that will take away the static. ❤❤
@dalemaclaren75769 ай бұрын
Awesome video and chat Claire ❤ These are absolutely stunningly Gorgeous ❤. Take great care and so looking forward to seeing tomorrows video ❤
@melaber779 ай бұрын
These would make fantastic ornaments, especially because they are partly transparent to let the lights show through
@MsGIna39 ай бұрын
Silver and White ❤. Gold and Red ❤
@calliemyers94699 ай бұрын
These are so gorgeous!!
@cindyskavland-cz3hw9 ай бұрын
Lov3 this
@christineingram559 ай бұрын
They look so pretty.When something goes wrong it always happens when you are showing someone how to do something ..Happens to me too,but great rescue and they are very seasonal love the idea it’s really cool 🥰
@ClairesCraftyCorner9 ай бұрын
Ohhh 💯 agree 🤣🤣 might be why I have a tonne of boo boos 🤣🤣🤣🤣
@mookzmom9 ай бұрын
It's not a canal, it's just a tall, skinny iceburg!😂 beautiful job, Claire❤
@moldsandshapes37839 ай бұрын
It's beautiful Claire, love your result!
@Leena799 ай бұрын
They are still lovely, with the canals and all. I think evaporation of the water is a significant part of the curing process of the eco pour type resins, and the layer of epoxy resin prevented that. By the time the epoxy part was hard and you demolded the pieces, maybe the remaining wet jesmonite had lost momentum to cure. I use a different brand, and am yet to try to combine resin and eco pour, but after watching this, I think I'll let the eco pour cure first, just in case, and then add the resin. I'm picturing a clear blue night sky of epoxy over white snow with forest animals.
@Spiceyspiney9 ай бұрын
What a stunning result. I'm sorry things didn't quite go to plan but the way you saved them is genius - the channels really look deliberate ❤
@jodimarie3799 ай бұрын
I don't know if this would work on Jesmonite or not, but when you get that kind of dotty look on paper, it helps to double emboss. On paper, you reheat the embossing powder and pour more on. The molten embossing will act as the glue. Let it cool completely, then pour off the extra, and reheat. it gives a more solid, uniform look - on paper....
@ClairesCraftyCorner9 ай бұрын
Ohhhhh thats great advice thank you I will try that .. I have also been told to buy the proper ink so maybe I won't get the dotting 🤩🤩🤩
@jodimarie3799 ай бұрын
@@ClairesCraftyCorner I have used a good quality embossing ink on resin (not sure of Jesmonite) and I got the dotting. In fact, I got more smearing too. I think because resin is not porous. Jesmonite might react differently. Anyways, I still got the dotting on resin. The ink almost beads up.
@ItsArtByDonna9 ай бұрын
Can't wait to try these ! Hope it will work with my Resin Crete, that's all I have in the states???
@bluesbabe739 ай бұрын
I love your creations! Have you tried to make a stamping platform for such things? You may get a better stamping result (I know most are made for paper stamping but I've seen homemade ones work well)
@TheAngelRockWithLorileiPotvin9 ай бұрын
Darn, I missed the LIVE, was busy cutting my German Shepherd Emmie’s nails, can’t wait to watch this either way! Big hugs & much love Everyone!! ❤❤❤❤❤
@TheAngelRockWithLorileiPotvin9 ай бұрын
I really, really appreciate that You share @Claire’s Crafty Corner when things don’t go to plan because it happens to most of Us, especially I believe; when We’re experimenting & pushing the envelope when it comes to techniques! These are beyond gorgeous & I LOVE your channel, all that you do & all that You share! ❤❤❤❤❤
@letscelebrateyou9 ай бұрын
I wonder if you could have sanded the Jesmonite off? Then, you would just add a small bit of resin over the sanded portion to make it shiny again! Please try! I want to see if it works ❤️
@CynthiaPrice799 ай бұрын
Oh yes! It’s obvious! To me, the jesmonite (sp?) is the snowy land, and the sparkly , silvery resin is the sky! We’re it me, I’d use the backs! That said, I haven’t finished the video yet!
@CynthiaPrice799 ай бұрын
Hypothetical solution, still only partway into the video: Put your mould on an incline. Then, pour one and let it cure on the angle. Flip your mould a 180, and pour the other material!
@tanashumate65879 ай бұрын
For my own personal Christmas decorations I use variations of blue purple pink and silver
@tanashumate65879 ай бұрын
But this white and silver is stunning as well
@ajnormandgroome9 ай бұрын
Clear stamps - when new, they need to be "seasoned" so ink applies evenly. I prefer to ink onto versamark first, then colored ink. If using embossing powder, I'd use only versamark and skip the colored ink.
@lightshine68519 ай бұрын
I love your personality and the fact that you roll with the oops. New sub from me!
@ClairesCraftyCorner9 ай бұрын
Thank yoooooo so so much 🤩🤩❤️❤️
@sandraallen41429 ай бұрын
It's a bit like an oil/water don't mix thing that happened there. Jesmonite is a bit like cement and probably has a certain amount of water, whereas resin is a plastic type compound, so doesn't have any water.
@brennashedd85549 ай бұрын
Maybe you could try resincrete (probably spelled it wrong). It's very similar to jesmonite, but absolutely compatible with epoxy resin.
@shawnm.rorierorie49699 ай бұрын
I think your boo boo turned out good
@callyross48219 ай бұрын
Always have a plan B, or C as in Claire? happy little mistake there, looks beautiful!
@sarahjones6179 ай бұрын
That's why I just stick to just resin😂 I know I'd fail
@kristalburns34909 ай бұрын
I wonder how well it would work if you made 2 jesmonite coasters and snap them in half before they are fully cured then put the half pieces back in the molds and your resin on the other side
@ClairesCraftyCorner9 ай бұрын
That would work too - I've tried it ... we just get a LOT more resin seepage because we have broken the seal from the mould if that makes sense xx we could also just pour the jes.... a little .. let it fully cure then pour the resin 🤩🤩🤩
@lyndabuckwright60609 ай бұрын
There still beautiful ,maybe you could have filled the channel with uv resin and a bit of silver glitter,but amazing embossing never done that it looks fun and interesting, Saying that I've never done epoxy resin or gesmanite,
@KP-nx8lo9 ай бұрын
Love this idea! Versamark ink would work better for embossing it’s a lot stickier and is made for embossing
@ClairesCraftyCorner9 ай бұрын
Thankyooooo I am totally going to get some 🤩🤩💯
@editek59929 ай бұрын
I didn't know you could use both at the same time instead of waiting for one to harden and then pouring the second.
@michellehancock6089 ай бұрын
Beautiful Claire can I ask could you have embossed the edging where went wrong?
@ClairesCraftyCorner9 ай бұрын
Yesss absolutely 💯
@marianela1118 ай бұрын
The stags look like they are made from hammered silver. 😃
@mlfett63079 ай бұрын
Excellent save! Adding the silver ink to the channel really looks quite elegant. What I recommend you use instead of Brilliance ink is clear embossing ink (like Versamark) for the stamping. It's stickier and will hold the embossing powder better. It will also melt better if you reduce the time and heat on the powder - it usually balls up like that when its too hot (although on non-paper surfaces this effect can happen more often than on porous surfaces). You can make your own de-static bag by using some cornstarch in a small cloth bag and rub it on the surface before inking. I have mine for almost 20 years and I still use it!
@ClairesCraftyCorner9 ай бұрын
Ooooooo thank you so much 🤩🤩🤩 I will absolutely get the proper ink and invest - need a trip to Hobbycraft me thinks 🤣🤣
@jewels646289 ай бұрын
Hey Claire ! These deer/stags … I could not find them in the Canadian, US or UK Amazon storefronts ??
@alexrusso65039 ай бұрын
Does uv resin stick to expoy resin and jesmonite? Cause couldnt we use that to fill the channels? Either way i think they turned out beautifully! Very winter wonderland - xmas feeling!
@sallymccornack1229 ай бұрын
I like them anyway, they are really different. I found out the hard way that resin doesn’t stick to cured eco pours 😢. Many trinket relays poured and ruined
@sallymccornack1229 ай бұрын
Whoops….I obviously meant to say eco pour onto resin not the other way round lol😊
@carolinefletcher92969 ай бұрын
I’ve never done embossing before. Can you put hot drinks on these or will it affect the image?
@gailbalch25519 ай бұрын
Could you use a paintbrusg or micro Q-tip to "paint" embossing ink and add embossing powder then heat?
@ClairesCraftyCorner9 ай бұрын
Yessss absolutely 💯
@Vsv12249 ай бұрын
I loved your idea! I went to your Amazon shop to look for those stamps and embossing powder. I didn’t find them. Where would they be? Did you put a sealer of some type on the Jesmonite?
@Lynnbud9 ай бұрын
I was looking for the stamps also and couldn’t find them.
@ClairesCraftyCorner9 ай бұрын
Heyyyyyy lovely ... sadly I couldn't find the exact stamps again 😢😢😢 I have linked all the alternatives with stags and trees etc .. 💔 sorry
@kimclayton58149 ай бұрын
The channel could be a shiny black color too.
@frodosdojo9 ай бұрын
Is it possible your table is not level ? My work table isn't and I've had overflows to one side.
@wilandalicia9 ай бұрын
If I wanted your original idea to turn out, could I pour the first part in, with my mold at a SLIGHT very suported grade, to make sure i have that 1/3 left? Then, once that part is set, put the resin in? Or does this type of project have to be done at one time?
@wilandalicia9 ай бұрын
I think you answered my question. You can't put Epoxy Resin over or next to Jesmonite. It won't adhere. Is that correct? Could you do it in stages anyway, but instead of waiting for the Jesmonite to cure, just let it settle for a little while and get very comfortable where it is ( 15 min to maybe even an hour). Then come back and pour the Epoxy Resin? Or is it all right now or nothing?
@wilandalicia9 ай бұрын
OK. So now I've rewound the video 3 times and even watched it with my husband and I think I get it; Jesmonites poured over Epoxy will never adhere. But, you can pour Epoxy Resin over Jesmonite and it WILL adhere. So, if the uncured Jesmonite channel was such a big deal, why didn't you fill it with Epoxy Resin after you discovered it? These are beautiful! I'm just trying to find out if these are salvageable with your original idea. Or were you happy enough coloring it with the silver pen?
@dibdob39 ай бұрын
Love them. Can you use the embossing powder on resin?
@ClairesCraftyCorner9 ай бұрын
Heyyyyy lovely - so many have asked me this but I've never tried xx I will have to give it a go 🤩🤩
@maidendragonfly5 ай бұрын
I think filling the channels with clear reson would make them look like a tree trunk.