This is DJI Focus Pro

Рет қаралды 125,096

Ай бұрын

Introducing DJI Focus Pro - DJI's first independent Automated Manual Focus (AMF) lens control system.
We're excited to extend creative freedom beyond our ecosystem to all of your set-ups with our new independent AMF lens control system, including a LiDAR unit, focusing motor, control grip, and a FIZ hand unit.
DJI Focus Pro facilitates continuous autofocus regardless of long-distance or close-up shooting with a powerful LiDAR module that supports focus distances of up to 20 meters and a 70° FOV. Additionally, you can manually intervene and take control of focus seamlessly, flexibly adjusting zoom and aperture according to on-site requirements.
Start your pro-level focus control experience now.
Learn more 👉 bit.ly/4d3dQLZ
#DJI #DJIPro #DJILiDAR #DJIFocusPro

Пікірлер: 116

@mateosanchez2322 23 күн бұрын

Dji please stop, I have no money left

@Muthumalai_Tiger_Reserve_Aana 22 күн бұрын

Although i don't own any DJI products.. as a photographer, i can kind of relate..

@gigazman 22 күн бұрын

😂😂

@khrisbymforgod7093 7 күн бұрын

😂😂😂😂😂😂😂😂

@joelmulder Ай бұрын

Finally! That touch sensitive focus dial is an absolute stroke of genius. It finally allows for the best of both worlds with Autofocus accuracy but human creative control.

@enriquegonzalez2674 Ай бұрын

As a black magic shooter this opens up a whole world of possibilities for me!

@ezontheeyesphotography Ай бұрын

Even though I shoot on Sony, black magic is something to think about with this option 😮😮😮😮

@uploadsnstuff8902 Ай бұрын

My god, the Pyxis would be perfect on this.

@AllThingsFilm1 29 күн бұрын

@@uploadsnstuff8902 Just what I was thinking!

@theblondedirector 23 күн бұрын

totally agreed.

@BeauLaFrenchie 10 күн бұрын

How can you use this with mobile videography?

@lecolintube Ай бұрын

Wonderful! I’m so excited that DJI’s Lidar is now accessible outside the gimbals (which are pretty awesome too 😉).

@fettirama Ай бұрын

Need to see this used on black magic camera immediately!

@idkanymore3382 Ай бұрын

use to PD MOVIE air smart 3 instead.

@TheLastFoiter Ай бұрын

@@idkanymore3382 i have it, it has no object identification (just whatever is closest) and terrible range, like 15ft MAX.

@Sethmotley Ай бұрын

@@TheLastFoiterYou are referring to the PD Movie?

@idkanymore3382 Ай бұрын

@@TheLastFoiter What are you doing that needs that many meters? What lens? Telephoto? LMAO The motor goes to infinity like it should if anything is out of sight. Object identification is for lazy people. L plus ratio

@idkanymore3382 Ай бұрын

@@Sethmotley He is seething because he wants his new DJI toy to cure his gear acquisition syndrome

@don-xl Ай бұрын

@DJI This is incredible!!! Focus control taken to a totally new level!! Salute!!! 🫡

@rolandeyezz Ай бұрын

DJI is the most innovative imaging company in the world

@TRAININGDAYMEDIA Ай бұрын

Been waiting on this forever!

@MuyCurioso Ай бұрын

Diossss... Como amo estar vivo para apreciar estos avances tecnológicos ♥ I LOVE YOU DJI

@Mall4567 Ай бұрын

Visually, Lidar (for RS3 Pro) and the "New" Lidar" Pro" look the same. DJI please explain what has been updated on Lidar with the suffix "PRO". Just added sticker on back ?

@radek.mov. Ай бұрын

thank you dji for making these things! freedom in creativy going up from ronin M!

@Mr.Meeoow Ай бұрын

That’s so cool! It uses the same LIDAR tech that Face ID does!

@AllThingsFilm1 29 күн бұрын

This makes choosing the Blackmagic PYXIS 6K camera even easier.

@Kayserjp Ай бұрын

you gotta know, this setup in movie industry with high end equipment will cost at least 300k. but dji does it for cheap!

@DavidWinstead Ай бұрын

WOW! DJI Rocks!

@newbepork3334 13 күн бұрын

From a collage dorm room to this :im so proud 😢

@karolmcgonigle1689 Ай бұрын

DJI are an incredible company.

@rising_stars_media Ай бұрын

Waiting for the newer version after this one

@BlackPartyFilms Ай бұрын

***UPDATE*** 1) The FIZ motors are very fat, meaning that on the increasingly more compact high performing lenses; you’ll have to alternate the motors between left and right rails. They wont fit the lens if all are placed on one side. With larger Cinema and zooms this is less of a problem. 2) There are NO lemo connections, This entire system is run off USB. This means it’s incredibly easy for these cables to disconnect and may be too delicate for good cable management on large rigs. 3) There is no Start/Stop Rec function in the hand unit unless it’s connected via Bluetooth. That WILL NOT WORK w/ Arri or Red (allegedly) 4) You can only map 3 lenses into the LiDAR. AC’s on productions with larger kits can’t really use this. 5) The calibration process is unconventionally lengthy and since you’d be forced to do this on set when you have more than three lenses. It’s an immediate NO-GO for professional techs (my opinion) 6) The Focus Assist tools that come with using the LiDAR are only accessible in DJI’s Monitor, which I believe is only operational with DJI’s Transmitter. I wouldn’t be surprised if the hand unit had no rigging options either. Overall I’d think this thing is only useful for people trapped in the DJI ecosystem.

@NeerajKumar-zv8vb Ай бұрын

Wow wonderful I am excited

@izzaniielachannel Ай бұрын

Very nice video DJI😊

@beany Ай бұрын

PLEASE create a two part option for the lidar reaction speeds - one for sensitivity, but a second option for motor speed. Then you'd be able to control the amount and style of reaction / lag when tracking and changing focus between foreground and background objects

@mooncricket Ай бұрын

Wow a month after I just bought the previous version.

@zenermedia8653 Ай бұрын

Love it 😍

@devenraval23 Ай бұрын

Crazy 😮😮

@mmgh7298 Ай бұрын

Thanks...

@francoismasuabi Ай бұрын

More this is innovation

@dennisvisualske Ай бұрын

imagin focus pooling for drone, dji is future for film making

@gamedesign1 20 күн бұрын

The next thing I would love DJI to work on is a device for capturing camera movement like the CamtrackAR does for iPhone. Something small that can be fixed to any camera. Would be great to export the data and import into something like Blender or Resolve etc. Loving the Focus Pro, been waiting for a company to build something like this for years :) DJI is definitely making some incredible technology (y)

@Ghhrjovi Ай бұрын

DJI is the best

@The_Daliban Ай бұрын

Is this a new lidar or the one from the rs2?

@jeffg4686 Ай бұрын

It's pretty nice ! Pretty expensive too... But it is pretty nice.

@muhammaddng8232 Ай бұрын

Can the focus be fixed by eye tracking? Or what is closest to the lens in general?

@Jeff_Geoff Ай бұрын

Amazing, game changer for creators!!!,DJI Focus Pro is the Future for creating videos. How much is the cost???

@flochfitness Ай бұрын

$999 USD

@ajeetrajaaa Ай бұрын

Nice ❤❤❤

@SirBernardWoolley Ай бұрын

Panasonic S1H＆S5:(Wake up from a deep sleep)

@prostigeMarketing Ай бұрын

Is this lidar system compatible with the tilta control handle?

@harmonkro9578 Ай бұрын

Wow

@Razielwow Ай бұрын

Can you use this in a blackmagic camera with an electronic Panasonic lumix g x vario lens? It doesn’t have hard stops. This stopped me from buying the pdmovie lidar

@adamfinmann7012 Ай бұрын

When does it ship???

@paperbox3615 26 күн бұрын

does it include a camera? i didnt hear it as part of it being included

@tomazzaman Ай бұрын

WANT! :)

@adamfinmann7012 10 сағат бұрын

WHY DID YOU ANNOUNCE A PRODUCT IN APRIL WHEN IT WONT SHIP UNTIL JULY

@hafitarosoraya Ай бұрын

Terbaik

@cheenu_mogha_ 22 күн бұрын

I crashed my dji mini 4 pro few days ago and later i noticed that obstacle was not working. So i did some research only but couldn't find any solution, which day you have to launch DJI assistant for DJI mini 4pro. we have face alot of situation.

@fonzieskatesurf Ай бұрын

But can it go to no fly zones like Autel can?

@yannick8273 Ай бұрын

I would have really appreciated it if you could address the loose cables that constantly collide with the gimbal motors or put too much strain on them. My microphone and external monitor are attached to the arm handles, and when the gimbal moves, it sometimes pulls on the cables, causing excessive tension. I don't understand why there isn't just an HDMI and microphone port in the same place as that multi-port and usb c port.

@ankitsitar 18 күн бұрын

Hey why don't use sony a73

@JoeGunawanfotosiamo Ай бұрын

The birds-eye LIDAR overlay for focus pulling at 0:11, what setups do you need to make that available? It doesn't seem to be on or available in the rest of the video, crucially for when the 1st AC is focus pulling at 2:00 mark. That would be game-changer and a serious challenge to the film industry standard, the Light Ranger 2. Also, no pre-marked rings like the Prestons and WCU-4?

@alexanderalexandrov 23 күн бұрын

This kit does not come with a bracket that connects the FocusPro Handunit (with the big knob) to the DJI Transmission Monitor, although in all the setups they show/advertise it with it in this video. and as of now, there's no way to separately order that bracket as a part. It doesn't come with DJI transmission monitor kit either.

@SHDEdits 25 күн бұрын

Honestly this gives even $10k ultra sonic systems a run for their money

@etiennepatriceettlinger Ай бұрын

Can the DJI Focus Pro Grip also pull focus by wire using the USB-C connection?

@ilanolivares9971 Ай бұрын

Wondering the same thing. Haven’t found an answer yet.

@patrickcarafa Ай бұрын

nice

@justinosby2884 Ай бұрын

Amazing $1000 without the fizz!

@gthm777 Ай бұрын

Is this compatible with RS3 Pro ?

@artiest5 26 күн бұрын

I also want to know this

@BlackPartyFilms Ай бұрын

1) How strong are the motors? If it’s anything like that motor that came with the RS3Pro I’ll pass. 2) Can the system be used with other brands? I’d want to use this with a SmallHD+Teradek. 3) What focus assist overlays are available? I’d love something similar to Light Ranger. 4) It looks like the motors daisy chain for power and talk to eachother, can I also get camera rec/stop from the hand unit? If so which cameras? 5) It also looks like the cables come downward from the motors, not ideal. But more importantly can they be placed on different size rods or am I stuck with a single size. 6) What’s the battery life of the hand unit and what type of batteries does it take? I’ll probably have more questions soon. Please answer these, we’d love to know.

@christianmbabazi9722 Ай бұрын

I have the RS3 pro And I like the most that come with it but my question is are these new motors compatible with the older setups

@ZimingXie Ай бұрын

It just seems like they made such a cool system with amazing features while never talking to a single working pro AC. We need 2 pin lemo power, 3 pin run stop, adjustable rod mounting, etc to make it comparable to other systems. I want to replace the Tilta nucleus so bad on these indie sets with these but the usb c cable and lack of basic io/mounting just lays all these amazing new features to waste

@hush-615 Ай бұрын

Bro you can't seriously think the guy who runs the youtube channel is about to hold a Q&A about the capabilities and intricacies of the product in the comments section.

@BlackPartyFilms Ай бұрын

@@hush-615 these aren’t difficult questions though. I only ask because these cheaper alternatives usually skimp out on important features and sell us a dream.

@BlackPartyFilms Ай бұрын

@@ZimingXie very true! I seen in a different video a new plate of some kind to pass through power to the lidar and motors. Maybe it’s small enough to throw on and takes 2-pin

@tonitornerooliver6746 Ай бұрын

Me after buying DJI RS3 pro and Lidar two months ago for my bmpcc 🤡🤡🤡

@sirvz Ай бұрын

How is the old range finder? Is it that bad? Not sure what the difference.

@tonitornerooliver6746 Ай бұрын

@@sirvz Not too bad, but just works with the gimball

@ZimingXie Ай бұрын

Hi. You guys really need to release motors with 2 pin lemo and height adjustments on the rod mount. I was really excited for these to replace so many Tilta Nucleus on indie sets. But having a bunch of USB-C cables are just unacceptable on more professional cinema builds. I get it for the old ronin motors needs to cater towards the mirrorless shooters, but disappointed that DJI always drop the ball on these key details to make it truly usable on pro sets. Love all the features! Just hope you guys make a comparable motor in terms of mounting and power to other pro systems

@ZimingXie Ай бұрын

Also need 3 pin fisher run stops

@austinheinproductions Ай бұрын

How do I invest in this company

@Utube2Itube Ай бұрын

I guess it comes with a pro price tag

@WalterArgueta Ай бұрын

this is the most accessible system right behind the Tilta FF, the prince is nuts for what your getting.

@K0S0s Ай бұрын

My follow focus has cost me about $30k. So, this is definitely not a pro price tag. Great for smaller camera builds though! I may pick on up as a lightweight solution when we do FX3s for that size.

@ZIGZAGBureauofInvestigation Ай бұрын

BUILD Us a *All Weather* DAY NITE ***DJI AIR 3sN *** with a [ Day and Night Camera System ] using CADDXFPV Infra Camera like devices.

@kmtb0407 Ай бұрын

와~~아빠 나도 저걸로 찍어줘❤❤❤😊😊❤❤

@skycity9097 Ай бұрын

Damn bro, how the hell can i get the money for this in my fx3 😢

@nikq7010 Ай бұрын

Hey

@videsat Ай бұрын

Looks like I've invented a new word: Weddinographer 😂 This is who will enjoy the toy.

@The_Daliban Ай бұрын

Only interesting if you use manual lenses

@t_is_a_random_commenter Ай бұрын

@WildStream36 Ай бұрын

@duyguertan3818 Ай бұрын

Can old lidar be used in rs4 pro? please answer

@user-ub5gg6re1y Ай бұрын

@大疆OSMO

@qpwoeiruty108 20 күн бұрын

ordinary people are closer and closer to being a professional cinematographers, without renting expensive cameras $10k per day

@sickpuzzle24 Ай бұрын

First

@okmachine Ай бұрын

I thinink I'm losing my job soon

@SavageJn Ай бұрын

Who can buy me this i am a broke student fr 😞 I have patreon😂

@Charles.L. 4 күн бұрын

always show show show promote promote but can't buy at store . sad

@kumbackquatsta Ай бұрын

better than god

@samtsen0831 Ай бұрын

That's isn't what I can afford

@jhinostroza Ай бұрын

puta hace un mes me compre el rs3 :/

@fab-ster Ай бұрын

The magnetic friction on the hand unit is nice. But please don't call it pro if it's using usb c connections. Where is the 19mm rod option?

@WalterArgueta Ай бұрын

Couldn't agree more, lost interest when I saw the USB port, PROsumer for sure.

@tomcattermole1844 Ай бұрын

Agreed, lets gatekeep and feel superior about drawing an arbitrary line between technology that will only get more blurry over time!

@Crypto-mi1hk 19 күн бұрын

Hi Dji , i want to be a drone footage enthusiast. Can you do a giveaway of dji avata 2 with goggles .i will promise/contract to mention sponsored by dji for 500 days for every video i upload . I am fairly active on social media , as i already do youtube shorts , reels . Please think about this offer .