This is the biggest FLAW on these Suzuki Quad's!!!

Рет қаралды 9,169

2 ай бұрын

In this video we will be going over and replacing a common issue part on these Suzuki eiger 400 Quad’s.
If you like the content please support the channel by liking and commenting on the videos. Thanks!
Milwaukee screw Driver set
amzn.to/4cwk7zr
Milwaukee M18 3/8" impact i use all the time.
amzn.to/4bXTSBw
Milwaukee 1/2" impact for getting the stubborn bolts out.
amzn.to/3IvcF9X
Tripod used for filming
amzn.to/49HAS90
Battery Jump Pack i use.
amzn.to/3tQOvTm
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you.
For business inquires please email Rock Ovitt
R.ovitt@outlook.com
#atvrepair
#4wheeling
#rockspowersports

Пікірлер: 49

@gamingradeon 2 ай бұрын

When you tighten the bolts with the torque wrench, it would be amazing if you would tell us the nm values you do :) other than that, you explain everything very well. Thank you so much for these videos. I am currently binge watching all of them from the newest to oldest haha

@rockspowersports 2 ай бұрын

I’ll keep that in mind for future videos. Thanks, I’m glad you’re enjoying them!

@DColl136 2 ай бұрын

Love the suzuki content! Recently picked up a KQ700 after owning Polaris for a few years, i'm much happier now!

@rockspowersports 2 ай бұрын

Glad you’re happy with your recent purchase! I’ve had a couple Kingquad 700-750’s and they are nice wheelers!

@raymondwabnig9811 2 ай бұрын

Vids are always good, we think we know who where watching, truth is no knows the truth, point is you seem like such a nice guy, keep up the good work.

@262fallguy 2 ай бұрын

The manual version is better for me.i like changing gears on smaller atvs

@Robbinsbuiltgarage 2 ай бұрын

Great video! Now get yours fixed up! Time for a rebuild video!

@rockspowersports 2 ай бұрын

I should!

@user-el1ub4lq8l 2 ай бұрын

I really enjoy your vids would love to watch you change the cvt belt on a Suzuki Vinson, you seem to be very knowledgeable about these things

@rockspowersports 2 ай бұрын

They are pretty simple to do, I don’t have a Vinson here right now to make a video on.

@paulbudford 2 ай бұрын

Well worth doing. Especially as you found the problem with the sealer. 👍

@rockspowersports 2 ай бұрын

Absolutely glad I opened that sump up and got all that junk out of there!

@Jonathan_From_TT 2 ай бұрын

I swear I’m always an hour late when you upload but non the less I’m here. Howdy duty from Indiana

@rockspowersports 2 ай бұрын

I tried to get the video out earlier but it didn’t happen.

@yeahright302 2 ай бұрын

rock I thought you were going to be doing more drywall and changing the name to rocks atv and drywall repair!!!!lol.😂😂😂.great vid as per usual!!

@rockspowersports 2 ай бұрын

No drywall haha, did enough of that when I remodeled my house..

@yeahright302 2 ай бұрын

@@rockspowersports lol,well i thought you missed doing it so you did your garage!!!lol

@ChannelMarker 2 ай бұрын

2000 wasn’t the only year arctic cat used the eiger - my ‘07 400 had the same exact motor and had the same exact issue I ended up doing the upgrade

@rockspowersports 2 ай бұрын

Yeah i meant to say 2000’s if I didn’t. I believe 2008 was around the last year of the eiger engine in the Cat’s.

@tsjjensen8775 2 ай бұрын

Great video, sir!

@markbuck9299 2 ай бұрын

Another great video Rock !! 😀👍

@rockspowersports 2 ай бұрын

Thanks! Glad you enjoyed it.

@ihatelols 2 ай бұрын

I did enjoy the video, now waiting for a nice weather to change the oils and filters on my atv :)

@user-uh8mz7gr9h 2 ай бұрын

Another good show. And yes they are

@Williamxmr 2 ай бұрын

Dump some oil in the filter gang baby 😎

@rockspowersports 2 ай бұрын

Everytime!

@jmudd5449 2 ай бұрын

Nice job

@cmrepair8720 2 ай бұрын

Ive got a 06 suzuki eiger 400 im looking to sell exact same as this one great quads

@Martyvison 2 ай бұрын

Should have told the cop you got the new Bluetooth inspection sticker 😂

@rockspowersports 2 ай бұрын

Yeah… not sure he would of found that too funny 😂

@motofarmmx2430 2 ай бұрын

👍

@adrienfortin4411 2 ай бұрын

Great video 📹 👍

@rockspowersports 2 ай бұрын

Thanks!

@Stuckin330 2 ай бұрын

I had the same quad and it ran great but then out of knowhere it wouldn’t start up when hot and left me stranded few times . Turns out it was a fuel prob in the petcock witch was weird I guess that diaphram in there wouldn let the fuel flow

@rockspowersports 2 ай бұрын

Yeah, there is a very fine mesh screen in the petcock.. clogged up pretty easily with dirt and debris.

@johnnugent6516 2 ай бұрын

Arkansas Wavin

@ronnyandersson5144 2 ай бұрын

Great stuff as always! Do you use the same type of Loctite on everything? What type are you using?

@rockspowersports 2 ай бұрын

Thanks! I mainly use the blue loctite. Once in a while I’ll break out the red.

@ronnyandersson5144 2 ай бұрын

@@rockspowersports The blue one is not as aggressive as the red right? Do you have the numbers on it?

@user-el1ub4lq8l 2 ай бұрын

No problem

@OceanBreeze2022. 2 ай бұрын

Do you ever work on Honda pioneers. Curious what sort of issues to watch out for on the 520 or 1000 models. Thank you

@rockspowersports 2 ай бұрын

I haven’t had a Pioneer in the shop yet so I’m not too familiar with them.

@OceanBreeze2022. 2 ай бұрын

@@rockspowersports I guess that’s A good sign, lol. Thank you for the great videos

@rockspowersports 2 ай бұрын

That’s true, if I don’t see them in the shop they can’t be breaking to much! Glad you enjoy the video’s.

@user-vf4mf2ei3z 2 ай бұрын

I need advise My 1999 kodiak 400 is backfiring through the carb and I’ve loosened intake valve and it’s still not starting. Would that be a bent valve or something else? Help would be appreciated.

@rockspowersports 2 ай бұрын

Could be a few things. A very lean condition could cause backfiring through the carb. Have you clean the carb recently? Also check to make sure the runner boot in between the carb and engine is not cracked and sucking air. It could also be a timing issue. Did you check your timing alignment to make sure it didn’t jump a tooth or so?

@user-vf4mf2ei3z 2 ай бұрын

@@rockspowersports carb is clean and the intake boot is fine and engine is timed correctly

@user-vf4mf2ei3z 2 ай бұрын

@@rockspowersports figured it out the flywheel key is sheered