Something else you may want to know about these is to have a look at the ground. Check out a video by Caseys Customs to see what issues he had. He found the ground was not done well, so he cut it shorter, and put a better connection to the clamp. That improved the welder exponentially.

Well that was interesting. Cant wait for follow up.

This is the one i missed. Love the live streams!

Mine works Great iv welded alot with it with no Problem at all , couple of guys i know have sinced ordered one after the seen me weld with mine. I also am a Advanced welder for 38 years so that helped also.

I have never seen anything like that. But I also have never ever welded so there's that. lol. Awesome video! would be interesting to see if the replacement dies/burns out too or works better.

Honey wake up unbox analysis just uploaded🙏🏽💯

Love the video! 💜

I have a precursor to this thing (oddly enough by Eastwood Kelarc )and it only works at a fixed settng of 50amps no adjustment. Cant easily strike an arc with anything over 2.0mm I think that is by design for a reason though as the hole to fit the rods is really tight and only 1.6mm fit with any ease SO looking at some ancient manual images I could see the rods were really thin which kind of confirmed it. I tried 1.6mm E6013 rods and it worked very well making a few butt welds on very thin metal 0.9mm which is all I needed to test its capability. I dont think I would every do continuous line welds with it. Reduce the size of the rod and time on small jobs and it should be ok although this TEMU one isnt gonna perform any better I am guessing than at THAT level of limited sized rods and amperage. I cant see it being any good for any task where you are welding for long periods of time but Im guessing that was the idea behind its design. Fascinating clip thank you for sharing it!

im tripping hard as hell off acid this shit is so fun 2 watch. thanks man

I Can’t A Single Video Anymore without seeing This Temu Welder Adu

I would just stick with a buzzbox. The new stick welders are smaller now in design, the size of a lunch box. The size of the head on that unit from temu is also a concern for puddle control. I laughed when I first saw these come out.

Great video and wounderful friend to lend a hand.

Soz.. What I see is the BIBD scooters needing a good fix.. like.. all of them lol.. Am I wrong? I'm not American or Canadian, so I don't know this government branch?

That is a LOT of Bird scooters. I'll bet that there is a good backstory there :)

The enameled copper wire on all windings on all transformers use a section of the wire which is one quarter of the section which is required for the transformer / motor to run continuously. The consequence of this, you must use the device for 5 minutes, and let it cool for one hour. Most electric devices coming from "the far east" use a similar scam technique. The next welding machine will fail all the same.

10 minutes is about 9 more minutes then I would have expected lol😂

funny, i reflexively turned my head as the weld started.

To bad it gave out so quickly. I had to buy one for myself to tinker with. Hope it doesn't give out so fast. It looks like it was doing good till it gave out.

harbor freight welders for sure the way to go around here

U doubt the glass used for stick welding for hundreds of years, you cant weld stick with normal settings on electric masks.

Are we not gonna talk about the bird scooter farm in this guys garage?

i thought there was a live stream but this video is nice

so does it require 110v input, or does it have a battery? why so much burn thru?

Dude are you a manufacturer or seller of those Bird electric scooters? Aren’t those like the Lyft/Ride share bikes??? This my first time seeing your channel, which I was under the impression is an unboxing/review channel and was genuinely confused seeing that many Electric scooters in the backgrounds.

Im hoping that the replacement one is better

Great concept. Sadly, the internals probably won't last, even in the replacement.

It's free now!

Do you sell those Bird scooters?

I don’t think people should scoot mmkay.

Got my Shop has one of them and it sucks!

8:10... really? It's good?? before I get slated... Multi trade aerospace technician here, sheet metal, mech, electrical, avionics, composite..... I'm not an engineer because I didn't take the full test.. ... because, Personal limitations.. I broke myself before getting there!..

Wow rip

What's with all the scooters

I almost never comment, love the vids though.

OOPS

It seams to be full proof among idiots... And it fails with the professional... I'll love to part 2

I dont know if i trust a temu welder...

TEMU has those for $10 you got ripped off. also TEMU is advertising they are giving them away...

great video did not this one

both of u are pretty bad welders 😅

The mask is probably the best part!!!😂

Tbh, I'd actually trust a fixed shade over an autodarkener. Honestly, what's going on (or more accurately into) in regard to your retinas during that admittedly super brief propagation delay between arc establishment & full darkening? That said I love my auto darkener, use it all the time. Just wondering if I'm gonna wind up selling pencils from a soup can on a subway platform in the near future... 😎😎😎😎😎😎👨🏻‍🦯👨🏻‍🦯👨🏻‍🦯👨🏻‍🦯👨🏻‍🦯👨🏻‍🦯👨🏻‍🦯👨🏻‍🦯

What a scam I seen an ad while watching a video and it came up free you get to t e m u and its $89 what a scam scam for some junk junk but now that I know they're out there I'm going to look for an American brand