This Resin Method Blows My Mind!

Рет қаралды 31,409

2 жыл бұрын

Hi Everyone. Most people think that UV resin is used as a glue or to make small pieces of resin jewelry. But did you know you could do this with UV resin? UV resin is easy to work with and great value. It can be used for so much more than small jewelry pieces or as a glue.
🎥 BE SURE TO CHECK OUT THIS VIDEO NEXT on the secrets to using resin that no one told you: • The Secrets That No On...
📖 Colouring books available here: stevemcdonaldcrafts.com/
📹 Check out my other Crafting KZfaq Channel: / @stevemcdonaldcrafting
📬 If you would like to post something to me, please use:
PO Box 277, Newmarket, CB8 1GY, United Kingdom
👕 Steve McDonald Arts and Crafts merchandise is finally here. / @stevemcdonaldartsandc...
😍 CHANNEL MEMBERSHIP Check out the perks by clicking the JOIN button on the link below. / @stevemcdonaldartsandc...
☕ TO BUY ME A COFFEE. Every contribution is very much appreciated and allows me to keep making regular videos. www.paypal.com/paypalme/SMcDo...
✍ My WEBSITE, available here: stevemcdonaldcrafts.com/
💻 As an amazon associate, I earn from qualifying purchases:
(USA👍) Here is my amazon store for the USA: www.amazon.com/shop/stevemcdo...
(UK✊) Here is my Amazon Store for the UK: www.amazon.co.uk/shop/stevemc...
Or see the individual links below for the items used in this video:
LINKS FOR MATERIALS USED FOR THE (USA👍), (UK✊), (Canada👋) and (Australia 🙌) ARE BELOW:
⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇
LINKS FOR USA (USA👍Only)
(USA👍) Resin: jdiction.online/?ref=w6l74mbw04
(USA👍) UV Resin: jdiction.online/?ref=w6l74mbw04
(USA👍) Mica Powders: jdiction.online/?ref=w6l74mbw04
(USA👍) Tray Mould: amzn.to/3sxd0ld
(USA👍) Embossing Powder: amzn.to/3IDByi4
(USA👍) Embossing Pen: amzn.to/3HyeDU2
(USA👍) Embossing Heat Gun: amzn.to/3ICBGOI
(USA👍) Resin Tool Kit: amzn.to/3C2hraZ
(USA👍) UV Torch: amzn.to/3Kel0h7
LINKS FOR UK (UK✊ Only)
(UK✊) Resin: resincolour.co.uk/shop/ols/ca...
(UK✊) UV Resin: jdiction.online/?ref=w6l74mbw04
(UK✊) Mica Powders: jdiction.online/?ref=w6l74mbw04
(UK✊) Tray Mould: amzn.to/3Iyo6Mw
(UK✊) Embossing Powder: amzn.to/3KcWIEh
(UK✊) Embossing Pen: amzn.to/36ItrCI
(UK✊) Embossing Heat Gun: amzn.to/3C3T7W0
(UK✊) Resin Tool Kit: amzn.to/3IBhbSK
(UK✊) UV Torch: amzn.to/3C51wII
LINKS FOR CANADA ONLY (Ca👋 Only)
(Ca👋) Resin: jdiction.online/?ref=w6l74mbw04
(Ca👋) UV Resin: jdiction.online/?ref=w6l74mbw04
(Ca👋) Mica Powders: jdiction.online/?ref=w6l74mbw04
(Ca👋) Tray Mould: amzn.to/3sysYLU
(Ca👋) Embossing Powder: amzn.to/3Hz9fzO
(Ca👋) Embossing Pen: amzn.to/3syM7xt
(Ca👋) Embossing Heat Gun: amzn.to/3HDr8NX
(Ca👋) Resin Tool Kit: amzn.to/3huuSXD
(Ca👋) UV Torch: amzn.to/35op7Z8
LINKS FOR AUSTRALIA ONLY (Au🙌 Only)
(Au 🙌) Resin: amzn.to/3pvcqT7
(Au 🙌) UV Resin: amzn.to/3MdN0Dh
(Au 🙌) Mica Powders: amzn.to/35fVnh9
(Au 🙌) Tray Mould: N/A
(Au 🙌) Embossing Powder: amzn.to/3hsiiIf
(Au 🙌) Embossing Pen: amzn.to/3vuq2Sh
(Au 🙌) Embossing Heat Gun: amzn.to/3stWOBg
(Au 🙌) Resin Tool Kit: amzn.to/3sxvMZP
(Au 🙌) UV Torch: amzn.to/3C51ArW
Did You Know You Could do This With UV Resin?
Warning: Important Health and Safety Notice:
Resin is an industrial chemical and as such should always be treated with respect and the manufacturers safety advice taken. Here is a video I have made on how I keep myself safe: • Stop Making Yourself I...

Пікірлер: 132

@sherrie553 2 жыл бұрын

Can you do a video on how to make holographic silicone molds using holographic diffraction grating sheets. They make the most beautiful resin pieces

@bobiijae790 2 жыл бұрын

Kind of reminds me of the stained glass art that I do the UV resins kind of like the simulated lead liner except for it's clear and you can make it any color that's really cool

@bobiijae790 2 жыл бұрын

So I absolutely love this quick QR I bought some and I have some of their new formula and their old formula but I do not have any of their UV resin. That's only due to lack of funding. I am also a part of their Facebook group and I always refer people to your channel Steve I tried out your technique with the UV resin and the bubbles and then the Micah powder and I put some of the pictures up on Facebook and I've had comments on it and I told them that I got the idea from Steve and gave him your KZfaq channel name!

@Oonagh72 2 жыл бұрын

I love cloisonné. So I am all over this. A way to save resin is to To save UV resin you can put some in a cup and run string through it. Then lay it out in your pattern and cure. You will have time to change something if you want and the thickness of your string determines the thickness of your line. If you have seen those nail art chrome powders you could use those for the gold to not have to use your heat gun on your mold.

@maiaallman4635 2 жыл бұрын

I was looking for the spelling of that word!

@bubblemum 2 жыл бұрын

Brilliant idea! Off to grab some string!

@helengibson8196 2 жыл бұрын

This is the first time I've watched someone work with resin. It looks like a beautiful craft. Thanks for sharing.

@rellsartcraftstudionarelle4211 2 жыл бұрын

Looks amazing Steve.

@lindaeastment4542 2 жыл бұрын

HI Steve, WOW loved your resin art work lovely bright & Cheerful looking 👍 thanks for sharing Lin 🦋✨

@lindaeastment4542 2 жыл бұрын

No prob Steve, 👍 I enjoy watching your resin vlogs you give out a lot of cool Ideas 👍✨🦋

@dollybrown1993 2 жыл бұрын

Love the colors!! You make things look SO EASY!! I can just see that on my wall.🤗🤗 Stay safe and stay crafty 👍👍🛎️🔔🦋🦋

@G.G.8GG 2 жыл бұрын

Just beautiful!

@TupmaniaTurning 2 жыл бұрын

Very impressed with their UV resin when using it to ‘glaze’ a turned wooden bowl or pot. Interesting video.

@catherinekenny6500 2 жыл бұрын

That's stunning Steve 😍 Xx

@rendaowe 9 ай бұрын

WOW, I REALLY LOVE THIS! I would call this a piece of ART, FOR REAL!

@suewarnes9469 2 жыл бұрын

Wonderful! I’d have it on the wall ! Couldn’t put anything on top of it. Thank you Steve. 👍☺️🇬🇧

@JL-il6vk Жыл бұрын

What a beautiful piece this is. I would love to have detailed instructions on the layers of resin and types of resin you used. That is absolutely priceless! Can’t get over how beautiful it is! Thanks for sharing.

@jcouch1993 2 жыл бұрын

Honestly, I was skeptical at first that it would look good, but it does. I really like it, well done!

@pamelamoody4912 Жыл бұрын

Stunning!

@mariamartin8175 2 жыл бұрын

I love it! Thank you!

@hilarymitchell1737 2 жыл бұрын

Just amazing! Wow!

@ethelgamble8886 2 жыл бұрын

So beautiful!

@valerieoberleexec-artist 2 жыл бұрын

Fabulous piece!!!

@christinahutchison3967 2 жыл бұрын

Stunning work

@rachy11051981 2 жыл бұрын

That is gorgeous

@rellsartcraftstudionarelle4211 2 жыл бұрын

Beautiful job

@velicad2905 2 жыл бұрын

I love the technique you used and it turned out absolutely gorgeous thank you

@AGDinCA 2 жыл бұрын

This is a beautiful project, but more importantly, it provides a lot of inspiration! Thank you for sharing!

@jafrinartandcrafts3683 2 жыл бұрын

Beautiful

@bonny9680 2 жыл бұрын

That looks beautiful Steve, love the embossing really makes the piece pop.

@sandybuttau731 2 жыл бұрын

Omg I love it. Awesome and thanks for sharing

@LeFouGallois Жыл бұрын

That is beautiful, well done.

@tonyafurbee304 Жыл бұрын

This is awesome! thanks for sharing! i learned alot!!

@sylviawatts4027 2 жыл бұрын

What a lovely project Steve thank you for giving us all your time and information 😀

@cynthiameyers9717 2 жыл бұрын

That is so pretty!

@l.s.rivers1697 Жыл бұрын

PRETTY!

@klairbaranek 2 жыл бұрын

Beautiful creations

@moirasharpe2541 2 жыл бұрын

Yet another gorgeous project to add to my rapidly increasing list. Thanks Steve x

@ItsMeTrish 2 жыл бұрын

I love this! Thank you so much 🙏🏻🙏🏻🙏🏻

@lindatoews5265 2 жыл бұрын

That’s my favourite video so far, thank you!

@janeenl9167 2 жыл бұрын

Gorgeous! Watch all your videos. Great job!

@rendaowe 2 жыл бұрын

I love this so much, awesome idea, thank you.

@margaretzuelke9761 2 жыл бұрын

Love the table! I'm gonna make one!

@ruthvictorino8536 2 жыл бұрын

Fantastic! My new favorite technique!

@agcrafts3502 2 жыл бұрын

Wow beautiful

@sandyeubanks4972 2 жыл бұрын

Now that was amazing I loved it

@Kimmie978 2 жыл бұрын

This is beautiful! What a great technique!

@stephaniesanderson9638 2 жыл бұрын

Imagine a faux stained glass window done like this 🙌🏻

@Hellnogizmo 2 жыл бұрын

I love the stained glass look of this!

@anitacutler5921 2 жыл бұрын

I love this idea!😃

@dianeh2420 2 жыл бұрын

I love this!! May take me awhile to get all the equipment, but once I learn how to do it I'll have another addition to my shop. Thanks Steve, you are the best!

@donnabusic9785 2 жыл бұрын

One of the best resin crafting projects I've seen. So much potential! TFS

@chewtime5836 Жыл бұрын

O I really like this technique. Thanks for sharing.

@demingfan1 Жыл бұрын

This tray is wonderful!! Just beautiful, like you!

@anneford5850 2 жыл бұрын

Wow, wow, wow! Seriously love this. It is stunning. Thank you Steve for your great videos and giving us all such inspiration 🥰

@joycepugh5347 2 жыл бұрын

SWEET - another awesome share from you - love this so much - Thanks for the share

@TrackerLorna 2 жыл бұрын

Beautful🥰luv colours and the neat techniques❤️❤️

@christinaperson1168 2 жыл бұрын

This is an absolutely amazing project 😍! Love, love, love ❤️ it!! I will think about trying this some time and Thank you Steve!!! 😊

@claudiaroeges2446 2 жыл бұрын

I love it. I never thought about using embossing power. Thank you

@richardbriansmith8562 2 жыл бұрын

That was absolutely amazingly Awesome steve McDonald

@franceallain6396 2 жыл бұрын

Just Wow!!! I'm impressed....you are a Master.

@junek1006 2 жыл бұрын

that is wonderful! I love it. I've done that with the resin. neat. your picture is beautiful

@pattyharrison6386 2 жыл бұрын

Oh it's loverly Steve❣💜💜💜💜

@susanmcdaniel7900 Жыл бұрын

beautiful

@deebeckham4754 2 жыл бұрын

Lovely 😍

@KImBurk1207 2 жыл бұрын

Oh my goodness, that is amazing. I am going to try doing this!! I have been wanting to incorporate embossing in resin.

@lryan1965 2 жыл бұрын

Omg that looks amazing, I’ve never seen that technique before. Thank you 😊

@carlycharlesworth1497 2 жыл бұрын

That was really pretty. I love the colours you used and watching you, I learned something new. I have never seen the technique you used today. It was fascinating. Thank you for a super video Steve. I love your channel. God bless you.

@beverlyangry4767 2 жыл бұрын

Hi Steve. This is sooo pretty, and I really love the white background. Thankx to whomever suggested it, for it really makes the finished project standout so much more. I hope that you continue to use it, for I know that it'll really give your finished jewelry pieces that extra pizazz when you display them. I didn't see your previous video, so I really enjoyed this one. Thankx for another informative video.

@angharadlocke 2 жыл бұрын

I love it xx

@le0422witt 2 жыл бұрын

I am so in love with this! It makes me think of me mom who passed in 2013. I love watching you work. Thank you!

@lynwoods4375 2 жыл бұрын

Thanks ate beautiful reminds me of stained glass. Thanks!

@kodi206 Жыл бұрын

Thanks!

@colourfulsouls 2 жыл бұрын

I haven’t worked with resin before (yet), but I’ve been watching and loving your videos for at least a few yrs! As an artist myself who switches around between all different mediums, I’ve learnt a lot from your videos so that when I finally start with resin I’ll have a head start (also ideas/techniques you’ve used carry over to other mediums) All your pieces are so creative and you’ve inspired me to want to work with resin once I have my supplies, I’m in the process of ordering some things to get me started. I first looked into using resin because many of my miniature and other polymer clay creations are very delicate and I want them to be stronger before selling them. I had the idea it would make them stronger if I glaze them with a UV resin, tho I’m still looking for more info on using uv resin with polymer clay first. I guess I can do some experiments and see how it goes, I just don’t want to create any toxic fumes if there’s any interaction between the mediums Thanks for always putting out quality content and inspiring us to “think outside the mould”

@MoniqueAO888 2 жыл бұрын

Interesting technique...and some 60ies vibes..."thums-up" !!!

@bryanwiley7345 2 жыл бұрын

I love that. Could I put the UV resin on the mold first for the design I want to do? Then finish the pour? I'm doing this on the edc tray from your earlier video.

@mandicoleman7433 2 жыл бұрын

Luv this 1 😍😍😍

@hollylowery26 2 жыл бұрын

Very interested tray, I never would have thought to do something like this. You definitely have lots more patience than I do, doing all the blue with pipettes would have driven me crazy. 🤪 I love watching your channel. Keep up the great demos.

@rondaedinger7912 2 жыл бұрын

Thank you for the tip on the heat gun I tried doing it before and it didn't work out,never thought to let it heat up frist.you are a true inspiration 🙂

@cat9lives999 2 жыл бұрын

All the possibilities!

@debbrady497 Жыл бұрын

Oh HOW VERY PRETTY❤️💖❣️💕

@bubblemum 2 жыл бұрын

Very reminiscent of a Tiffany lampshade. Woot! I had said that before you got to the end of the video, so here is your promised cup of coffee! (And doesn't it look SO MUCH BETTER on WHITE?)

@gabrielleschmidt1435 Жыл бұрын

🎉Very pretty!😊

@aprildegele1510 6 ай бұрын

Brilliant! I used to emboss years ago and I'd never have thought of using it in resin. Genius. Baby wipes! I go to the dollar store ($1.25 US now) and buy them in bulk. They clean resin beautifully, as well as acrylic paint and surfaces, containers, your hands, and the like. BTW, if a baby wipe won't clean a surface, use alcohol. As to the finished product, to be honest, it's pretty rudimentary, which is totally fine and beautiful. But there could have been other techniques that you've shown that would take it to the next level!

@lindae7013 2 жыл бұрын

Awesome

@Rammy72Moni Жыл бұрын

Oh Steve, this is so pretty! I think I would use it in one of these decoration windows (these thingies with the mirrors in a window frame) and hang it on a wall. Until now I used UV resin only for the bubble look or for doming, this technique reminds me of silk painting with this golden outlines... or window colour art. It´s baffling how one can adapt techniques from all over to every type of art and crafts. And the more I look your videos, the more I can use things from other hobbies in my resin work. Sometimes I even use sealer gel from doing my nails to seal my resin pieces. ☺ And the E-File, of course.

@sharonhaughton-pearson2790 Жыл бұрын

Wow it really did look like cloisonné. Lovely

@traceyfairburn1803 Жыл бұрын

Watched your videos and found them very helpful, I’ve even treated myself to the resin curing machines. Absolutely brilliant they are. Anyway I have embossing powders from my card making collection but what is a embossing pen can’t say I’ve seen one of these.

@bethanywilliams520 2 жыл бұрын

I'd love to see you do a Polka dot version of this. Using a stencil to draw around the circles all one size or several. Then building the layers and embossing the tops. Personally I think that would be gorgeous xx

@valerieromeos2806 Жыл бұрын

Hi Steve! Love your vids! I learn so much!!! I recently tried a technique learned from you. But I got slightly different results. I used j diction uv resin recently and the tray I did was longer than wide. So I topped up for a stunning finish! But 😮 during curing as I inched my way along I noticed after cure and unmolding I had bars of raised resin. I could tell exactly where the light stood over my piece! I was careful to overlap light so that wouldn't happen! I recured to no avail 😮‍💨 wish you could see it! 😂 Not giving up tho! Practice makes perfect right!😂

@lucindagardener6100 2 жыл бұрын

Love the white background

@Nrscathy60 2 жыл бұрын

So cool! I am going to do this ptocess

@Nrscathy60 2 жыл бұрын

Lovely process!

@DorianneDelageArt 2 жыл бұрын

And another inspiration ! The result is really nice !👏👏👏 I have bought this mold after watching your video and can't wait to use it ! Does your brain get a break sometimes ? And what drink gives you all that energy ?🤔😂😂😂 Anyway, thanks for all these great ideas !💙💙💙

@pamelatomson9531 2 жыл бұрын

I think that this technique would be great for making a faux stain glass window or sun carchers. I think it would be worth trying.

@susanmitchell3516 2 жыл бұрын

wow wow wow xx

@ourparanormalworld 2 жыл бұрын

THANK YOU FOR SHOWING ME HOWI CAN USE WHAT I HAVE HERE TO MAKESOMETHING EXTRAORDINARY. I THINK IT GOES WITHOUT SAYING THAT THIS IS A TECHNIQUE THAT COULD BE USED ON CARD (THE HARD TYPE OF CARD. I'M REALLY IMPRESSED HOW THAT HAS TURNED OUT.

@carolthorburn2979 2 жыл бұрын

OMG!!! Steve that piece is absolutely gorgeous 😍 one of my favorites you have done . The colors are gorgeous bright and dark warm at the same time. I seem to have missed something in the video. You placed a sheet with your design on it . What is that? Clear? I can see its outline once in a while, then on the finished piece the blue pigment is darker where the paper is which makes it even prettier. Embossing powder and glue to buy now ouffff. I have a heat gun but it's a bigger model than you have. Will it do the trick? Many many thanks for sharing great video yet again 👍 hugs from Québec Canada 💜🫂

@TheBriarPatch Жыл бұрын

I use the liquid lead, (not really lead) to make raised borders. Much easier, comes in colors, and is cost effective. The brand I use is Gallery Glass, made by Plaid.

@LisaVornhagen 2 жыл бұрын

That is so pretty! I really love it! So shiny! I am wondering if a heat gun does the same thing or if I specifically need an embossing heat tool? Also can I use mica powder or does it have to be embossing powder? Thanks!

@thecupcakefoxblog 2 жыл бұрын

Beautiful piece! I’m actually here to check out which mica powders you use. Though I could use some eye shadows, based on your other video 😆

@thecupcakefoxblog 2 жыл бұрын

I bought my first set of resin using your link and got a discount code from doing so! Thanks so much!

@colleenhathaway64 Жыл бұрын

I know this is an older video but I am hoping that someone sees this…I just got Jdiction UV resin but I don’t know if I should put the original white cap back on to cover it when I am done or if I can just leave the black nozzle cap on? I couldn’t find anything on google so I am hoping someone on here could give me an answer….thank you so much!!!! And Steve McDonald you do such AMAZING and BEAUTIFUL work and you are the reason I am using Jdiction!!! Thank you so much!!!

@fairyspunfibers9098 Жыл бұрын

@Colleen Hathaway Hi, Colleen! I use only JDiction UV resin, but none of my caps have ever been white! Just as long as the cap fits and doesn't have a hole in the top, it won't matter what cap you use. I'm assuming 'nozzle' implies it *does* have a hole in it?

@TheJooles34 2 жыл бұрын

This is just gorgeous. Can I ask please where you get your long neck lighters from please? Mine is rubbish and the ones on your Amazon shop are out of stock! And bubbles are the bane!