Jays elbow injury came about from lifting too many 40 series cards within the few months of review, mostly impacted by the 4090 OC Brick Edition with quad fan cooling, truly a masterpiece card that sent Jays arm over the limit. Thank you for your service in reviews. Your channel will forever be awesome!

6 Month later... Corsair flipped the interior 180° , Top cooler gone

Effective bro.....

That is an amazing build. I'm usually not amazed by pre-builts; but this is nice. Props to Origin

Would love to see this case for sale as a stand alone! Even in white would look stunning.

Sometimes watching Jay unboxing something is more entertaining than an action movie

BEWARE the corsair 2000d does not have exhaust fan at the top or bottom its blocked off just returned mine. Just thought I would give anyone a heads up on this case before you buy

I think the sata drive is a great idea, fast and easy to replace / upgrade if needed, easier to get to in that form than the nvme, so for extra storage it works.

Great,honest review-well done guys

EFFECTIVE (love ya Jay)

Dang that's a nice sff build, I love sff, especially when they actually have great airflow.

I can't want to size the AFFECTIVENESS of the design!!! :)

alternative title, jay discovers you don't need a garden shed sized case on your desk to build a powerhouse of a PC

hmmm... I'm stopped looking at small factor pre-builds because I have been burnt way too many times. Though I find some of the builds meant for enthusiasts very interesting to look at anyway. Thank you for the opportunity to window shop for a computer I would never consider in shopping.

Some really good ideas here, I like this PC!

Amazing Video and PC build Love to see this

Your iCue issue is caused by hwmonitor accessing the corsair sensors, you can fix by turning off support for corsair in hwmonitor settings. Both programs accessing the same sensors at the same time is causing a conflict which confuses iCue, so it drops the device.

It's nice to see how far SFF builds have come. Now lets hope prices for GPUs drop by the week and more people can build them. 😀

I am so envious. What a badass machine packed into that box.

I had the same strap for an elbow injury... I found a copper infused compression sleeve worked much much better. Also, if you tore the tendon be prepared for a long healing process. Took mine about a year to heal.

The SSUPD Meshlicious was probably one of the first to use this design. I've been using and it offers excellent airflow.

I like this setup and the fact it's well ventilated to keep temps down. Spec'd out seems a little over $3k but not terrible for something pre-built this well and parts inside. I would maybe downgrade to a 13700k, but maybe not considering how well it seems to handle heat of the 13900K

I would love to have that pc. all the power and features of what i have now. Amazing product, thanks for the review

What a cool computer! It’s so functional and well organized in such a small form factor.

So lovely. Will origin actually sell the case by itself? That would be amazing!

props to Corsair for cable management in such small form factor well done 👍😊😁

The fact that this is "like a Corsair One" is exactly why I am interested, I want more options of THAT form factor!

I love it! I currently use a Zotac Magnus one mini pc with a i5 10400 and RTX 3060, this Chronos SFF is next level!

Very similar to the look and feel of the Silverstone Alta G1M. The G1M just have a lot of plastic parts though. The FE cards are better on the orientation as the fins are exhausting on the backplate

I had tendinitis in my right elbow a few years ago, it was a repetitive use injury from work. It was so annoying hearing everyone make the same joke every day about whackin' it too hard! So Jay I feel your pain, and take it easy while you heal up to minimize lasting damage! Anyway, I have a theory: If you look at the four minute twenty second timestamp of Jay's previous video, he clearly taps his elbow on the table while distressed about the thought of horizontally mounting a Strix 4090 like some sort of peasant. This stress multiplied the elbow joint stimulation at that exact moment and manifested as an injury ;)

Love the itx content!

Someone told me about these cases beforehand and yeah I really like this.

Fantastic SFF layout. Case looks to be heavily inspired by the Silverstone Alta G1M but with a bit more space optimisation.

For the ICUE problem you need to unplug and plug back in the cooler wire(s) I had the same problem once and that’s what fixed my issue

This is super cool. I really do want to attempt a build similar to this at some point

Nice & Clean Setup 👍

I think they put the unboxing instructions inside just for you lol

Neat PC! A lot of power in such a tiny volume. BTW, the 4080 is a 320W card!

this Chronos seems to provide a glimpse into Corsair's new SFF case and SFX-L PSU from this amazing unboxing. Thanks Jay

Corsair 2000D Airflow is now for sale as a stand alone case. If you use slim radiators and slim fans, apparently you can fit 2 additional 240mm radiators for a total of 1x360mm + 2x240mm radiators!? doesn't that scream Jayz2cents??

Dang I wish they'd sell this case alone. SFF enthusiasts could do some really neat stuff with it

Pretty affective way to boost engagement, masterfully done lads! I hope you'll talk about it on RTFM (whether it was intentional or not).

Got one in the cart! I like it!

I am sure the other hand is more than capable given enough time, Jay. Persevere and godspeed, sir!

Seeing this now, it makes me wonder if an AlphaCool-modded founders and short-throw pump / res combo could permit for an open loop in that thing.

*Effective*

The fan layout is something I was thinking of doing with my old case for some time. I'd have to customize it big time, but the air flow I figured would be beneficial without too much noise. All them fans...mmmmm.

Super dope SFF, nicely done Origin.

But how do you feel about simple and effective design instead?

lmao "jay stop wacking it" im sad to say that was going to be my first guess

Cool Specs (glasses)! Makes you look sophisticated! 🙂

Now I can refer back to this whenever I get around to building out a van :)

Like the case for the ITX build, too bad Orgin does not sell just the case alone. The Itx case takes the design layout from HYTE Revolt 3/NZXT H1/Meshroom and 100% improves it. That's a win for Origin.

The title is effecting my mental health

The max power supply dimensions for Chronos are SFX-L not ATX.

I think it's ideal layout if one wanted a 3 fan radiator and plenty of room for longer GPU cards. I think the MeshroomS is still the one for me since I already had a dual fan radiator and should be overall smaller and fit in a carryon etc. I might prefer that the GPU and cou fans pull cold air in and reverse the case fans to pull the hot air out. It bares testing to see which runs cooler

*Effective 😉

Affective? Or effective 😂

Who ever doesn't have to laugh when Phil laughs in the background, is not human ;) That laugh just makes you laugh!

Thanks for the video ! Having a fan at the top is a must on this case. I don’t see any at the top on corsair website and other reviews of this case, and the I/O is supposed to be at the bottom. I wonder if we can swap the foots to invert the tower and if it’s possible to install an additional 360 radiator at the rear maybe with the fan installed outside the case.

Effective?

The case is yet to be release Corsair 2000D. It was listed on Amazon, B&H a few months ago but haven’t seen it in stock since.

I found a mesh that actually doesn't impede airflow at all. "40 mesh". It's small enough to trap all the dust but with a large enough opening per square inch that it doesn't impede airflow. I make all my own dust filters now. So on my lian LI PC 011 dynamic I have the natural filter from the case and an added mesh. It doesn't affect thermals what's so ever. The only dust that gets in the case (which happens really slow over time) is a fine dust that is easily blown out with my electric duster.

"I'm in love with this simple yet affective design!"

Was about to do a Tower 100 build for my daughter (Computer Graphics Artist major at university and PvP gamer). Decided to just order one of these maxed out. Now I'm envious for a new PC.

If they hooked the cooler fans directly to the motherboard header(s), those individual headers are listed and controllable once you select the motherboard (click on the image of the motherboard) in icue. At least that's how they work with my motherboard.

We can only hope they will release this case by itself!

I have the same issue with the commander core not showing up in iCue, but all the fans are still working as they should and the rgb is fine as well. What I've seen on several forums is that some mobo's don't give enough power through the internal USB port on the mobo, and what's recommended is getting a powered internal USB hub, connect that to the motherboard and then connect the commander core to the hub in order for it to appear in iCue. Seems like Corsair haven't taken into account how much power is provided by the internal USB connectors on the motherboards. (I have an asus rog strix x570-f.)

Pre-builts are getting better every year... Well decent pre-builts. Loving vertical MB cases

Gosh I LOVE ITX builds

I seriously love that packing. Wow. I seriously love that computer, too. Wow.

just make this case a thing I can buy thank you very much

I love this small form factor build.

You capped it you asked for it...............EFFECTIVE!

I had an issue with my Elite Capellix AIO in my case where my pump and fans weren't showing up in iCUE. The USB for the Commander Core kept connecting and disconnecting and was pretty annoying with the Windows dings. Turns out the SATA power cable for my Commander Core was ever so slightly loose - I have now jammed it in and everything works perfect! No more annoying USB disconnection/connect dings!

nice nod to the rdr build that no one has forgotten about;)

Great Video.

Watching all these videos makes me excited to build my next pc. It will be my second and I think I'm gonna do it up all nice and try custom water cooling for the first time.

2:30 wow, that was only 2 years ago and I was blown away by how much weight you've lost since! Amazing job :)

Man that pc looks so good!

Had to pause the video cuz I started laughing so hard Jay you should definitely take it easy playing racquetball or tennis ball you seem like the type to play either to me

"Simple yet AFFECTIVE." Those of us who saw the title when this was first uploaded know about that dirty delete, Jay.

Pretty cool one. I love the look of my NZXT H1 V2 though. It lacks in cooling a little but does well enough to out perform consoles by a long shot. Maybe they will update it again and add a large fan in the top.

Case reminds me of a somewhat larger Meshalicious. Awesome case that I sadly had to retire once I got a larger graphics card.

It's gotta be from the gym. You've been doing awesome! Same thing happened to me from lifting too much

Having the tubes of the radiator coming from the bottom makes it easier to fold the radiator down all the way if you ever need to access it. On top of that you won't have the gurgly noises if it ever runs a bit dry in there because the highest point in the loop is the resivoir like section of the radiator.

OK Jay's version of back in my day got me 🤣

Nice video explanation of an awesome small form factor tower best I've ever seen anyway. ICUE has been doing that randomly with updates forever. It is frustrating. I'd check and see how the USB is connected to your motherboard from the commander pro and perhaps change it to another port. I use a Corsair power supply which using the second USB header and the old ones (I've used) only use one of the two available USB ports on the header so I wired them together for one setup (or purchase a splitter to plug in the header) so I still could use one external header for my case - it's really simple to combine them I don't know why they don't sell a combined version of the cable for people who want to use all 4 ports available to those two headers. If you don't have enough ports on that motherboard trying changing to different USB ports using different cabling especially if you have an extra external case port that's not being utilized which is what I did when I ran out of ports once or at the last resort using a PCIe USB port board to give you extra. Corsair recommends deleting the configuration files and reinstalling, update etc. Which is worth a try before touching the hardware if you don't want to dig around tracing cabling or buying / making extra cabling and whatnot.

I can't wait to get my hands on that case....

Check the Multicore Cable going from the Pump to the Commander Core XT Hub. It sometimes comes loose. Nice rig though!

Here is a basic guideline for affect or effect that can help clarify how to use the two words correctly: Generally, we use affect as a verb (an action word) and effect as a noun (an object word)

This would be perfect for me considering my health right now, I try to game but I always end up just watching other people on twitch just streaming coz I get tired. Im a type 1 diabetic and also doin dialysis, but I’ve always been a pc gamer, Love watching your content jay as always, you guys are awesome! U guys inspire me to keep goin everyday! Thanks for that! Thank you for making me laugh, I needed that! Hehe! Godbless always! 🤘🏻😎🙏🏻

Would have been interesting to see how the temps change, when the 3 case fans are set to exhaust!

That's gotta be the best window I've ever seen.

When your KZfaq notification cuts the title off at "I'm in love with this simp..." Lol.

It's up for sale now (July 17) with most retailers.

But Jay, we love. We love when you open it silly like. Keep doing it. :P

that top fan looks like a good spot to put your coffee/food to keep it warm

i'm so into small form factor type of pc built which my next pc gonna be while current PC still great no need.

Corsair 2000D Airflow. Very nice.