The helicopter engines are slowing down your max rotation on the blades. you have to use a free spinning block if you want to spin faster

Now we need a supersonic strongest shape!

Day 1 of asking RCE to play scrap mechanic

The ability to do it more than once proves it’s not a flaw, lol

Matt went from Autogyre to Alouette to Kamov to Hughes XH-17 to X-2 But Matt also forget one little thing ; cyclic ! (and residual thurst from engines) to move forward ! Engineering behind helicopters is insane !

Hey RCE I think this would work if you change the angle of attack of your rotors. Currently they are like a knife slicing through air..

If you didnt know mat; the reason it has 2 blades at the top and one spins in the opposite direction is because it doesnt have a tail rotor; the 2nd blade does the job of the tail rotor which is to cancel out the torque of the main rotor. The KA-50 'black shark' is a prime example

dactyl means "fingers" so ptero-dactyl is winged finger. helico-pter is spiral-wing.

hey Matt, this has been done before so I can assure you explosives can send you into supersonic speeds, but I would like to see your take on that. Hint: there's an indestructible seat

Angle the wings to get more lift

Just wanted to mention finding your channel has brought me unspeakable joy

*puts tail rotor on, forgets to turn it on to counter the single main rotor spin*...Genius Matt. lol

Matt, if you go into settings you can actually change what value system is used to measure speed in the speedometer, from Miles per Hour to Kmph

you can press backspace to return your creation to the centre of the map instantly

Seeing as you play Trailmakers, Minecraft, and similar games, I imagine you'd enjoy Factorio, Astroneer, and Scrap Mechanic as well.

Tactical helicopters use engine thrust to move forward and the blades to go vertical. Check out the ch47 Chinook for an example.

I love these videos. At this point I wish you could combine video concepts and see if you could make a Supersonic Dam that could stop a tsunami. Short of that, however, can you make a Skyscraper go Supersonic?

the tail roter is very important as it not only serves to turn the helicopter around, but provides stability as the top large spinning blade produces a force that will cause the helicopter to go crazy

Helicopter engines in this game have a MASSIVE amount of torque. The thrusters were moving the entire creation instead of just the blades. The servos on 0% strength are practically bearings, so they don't have the speed limitations the engines do.

Interestingly, heli also means "sun", and "copter" is a derivation of "Copt" in Middle English, so the word means something like "sun of the Coptics" (who are the Native, non-Arab Egyptians). Because that is what happens when you use Greek or affixes; madness ensues in the language.

On a normal helicopter the back blade is used to prevent rotation of the actual fuselage of the helicopter. Therefore the back blade needs to be on at all times to preform counter rotation

3:16 that helicopter looks like a v8 engine

I guess its a bit much to ask this program to simulate retreating blade stall conditions, but there is a reason why why helicopters generally can't break 300 mph. Basically in the scheme of things, half the rotor is going forward and adding your velocity, the other half is doing the reverse and subtracting. Since the blades have a certain critical (stall) speed like any wing, that becomes a problem. Furthermore, helicopters move by essentially trading lift for directionality ie tilt the rotor hub to get 85%up/15% forward. Most super fast copters have a combination of wings (ie the Mi-24, the NASA testbed you mentioned) and a pusher engine (ie AH-56 Cheyenne Prototype) so the lift rotors are not burdened as much.

us: "make a supersonic helicopter matt" matt: "SUPERSONIC CATAPULT YEAH (counts as an helicopter btw)"

Look at the hydra aircraft from captain America the first avenger. That’s how you make a supersonic helicopter. Think of a rocket without the engine, and add plane wings, then add rocket or jet propelled rotors in the middle, but instead of doing the modular wings the way you did, attach them to something that will rotate and then hold them at 45 degree angles from level, while keeping the rotor propelling engines either level, or at the same angle as the rotor; mount 2 of these rotors in the middle, but slightly more towards the top, as counter rotating rotors, and then make the fuselage fins and wings have regular plane controls. The key is to build it vertical as a tail-sitter design, with the spine of the helicopter at the exact same alignment as the axis of rotation of the rotors.

A supersonic submarine bridge, something that can create an underwater sonic boom, also a supersonic Beaver.

What a joyful exploration of how helicopters should be made. Cheers.

I'm curious as to how it would go drone style, ie: multiple double blades on outriggers, maybe with some jet propulsion for forward movement

Rce you're so awesome! Love your content keep it up!

4:54 Or you can just press backspace to teleport back (it also deletes all your stuff you dont currently use so it cleans the map)

The record holder you showed a photo of uses a propeller for forward propulsion. I think that combined with the other style of dual blade sets with them on separate wings is the way to go. After googling it, the one I was thinking of is the Osprey. And the technical term is 'dual rotor' (from what I got as responses to searching for 'dual blade set helicopters'). :)

Most people: (make a helicopter.) Matt: (makes a smoke machine.)

If you put a spinning engine atop another identical one going the other way, the top one technically wouldn't move at all. Helicopters that do that (and I think it's only toys) drive the top rotor from the same motor, using a cog attached to the outside surface of the rotor's stem, while the lower one is attached on the inside. I dunno if that's even possible in real helicopters, surely the turbulence would be terrible, and you'd have the top rotor compressing air into the space above the lower one, where the lower one is trying to create lower pressure. The only twin-rotor helicopters I'm aware of use one at either end of a long body. They intercept each others' airspace but are geared to never collide with each other. They do that for greater lift for carrying heavy cargo to places a plane couldn't land. I suppose you could carry it on to a triangular craft, or square, or however further, if you really wanted to. Past a certain length it's not practical to build helicopter blades, cos the wing tips end up going travelling too fast. I suppose you could go with a giant poly-copter, as long as each one adds power overall, you might get something useful. Well, "useful".

Aerodynamic blocks are the key to going faster in trailmakers.. or you can do the zero drag glitch with detachable blocks.. also don't forget about the UFO engine, i built a 5 core airplane that dose 3k MPH.

I’m not a helicopter expert, but there’s usually a bearing that connects the blades to the main body to counter the rotation and keep the vehicle stable. This is assisted by the constant rotation of the rear propellor

it was really impressive how you were able to make a *very* legit *and* real supersonic helicopter!

At 7:14, it looks like a combine harvester for clouds. 🤣

Buzz lightyear quote made me smile lol " it's falling.. with style" lol

2:30 there was a quite similar concept back in the day in Germany... you can search it in the internet by "focke-wulf triebflügel" practically a VTOL Jet

speed of sound = the square root of (the coefficient ratio of specific heats × the pressure of the gas / the density of the medium). Therefor all you need to do is increase the heat and pressure and reduce the density. I've Architected the solution, all you have to do is engineer the fix.

RCE when designing the helicopter you forgot about one major thing. You forgot about the ability to change the pitch angle of the rotor blades. You see increasing the pitch angle of the rotor bales increases their lift force significantly. In fact by changing the pitch angle of the rotor blades also called collective is how real helicopter change the amount of lift the main rotor generates. So I suggest you add ability to change the angle of your rotor blades and be amazed at the difference. I'm willing to bet that even your basic helicopter could reach speeds of over 150 MPH if you add yourself ability for changing the pitch angle of your rotor blades.

7:00 it made me think of the handspinner blade by SushiRamen 😂

Should have put some sort of engine/propulsion on the underside of the copter so when you tilt forwards it's then provides forwards momentum

You need to build the most efficient supersonic vehicle!

Try a design with two sets of blades like a Chinook

I feel like if you put the blades very far out using the connector pieces that have no air resistance, you would get a lot more blade speed from just a single blade instead of it being up close to the center of rotation

If you could get your tail blades to go at a constant speed that will stop you from spinning so you don't need two main blades. Let's say you set the tail blades a 30 mph. That will stop the rotation of the helicopter. If you speed them up to above 30 it will spine the helicopter slowly in one direction, slow below 30 the helicopter will spin the other way. That's how real helicopters work anyways

should make a helicopter that turns into a plane, like the helicopter blades fold into plane, and plane uses thrusters. will have to turn off props, or they will destroy aircraft. also, id recommend experimenting with multipurpose vehicles

RCE you have to play Sprocket! It’s an amazing engineering game! Plus you get to kill architects with your superior engineer tank designs.

The small propeller on the side is meant to cancel the larger props torque and the big prop cancels the small props rotation

A Boom is a BOOM!

The weapons are exactly what I needed to finally convince me to buy this game. I've been wanting something like this every since I played Banjo Kazooie: Nuts & Bolts

RCE: What if I just add a bunch of blades? Game: ... ? ... ! (Confused physics noises) RCE: Okay! It would seem that, uh, the physics engine did not like that. Me: This must have been how it was with God creating the universe.

your speed is going to be heavily limited by the drag profile of the helicopter blades / wing pieces toward the airstream - try rotating the wing / blade toward what it considers the 'forward' direction and see how red those arrows go given what trailmakers' aerodynamic modeling is like, though, i don't necessarily think it would help to change the angle of attack of the wing / blade the way it does in KSP - it might just not be possible to make a very fast helicopter in trailmakers

“Helicopters in real life do this” *immediately crashes into the ground*

What about making a VTOL? I'm sure you can find a way to incorporate propellers and jet engines to break the sound barrier with one of those!

7:46 Top blade clearly going anti-clockwise Matt: Top one goes clockwise, got it.

I don't know where you get your information from but the Airwolf is the quickest helicopter of all time. Easy doing mach 1+. :)

"I don't want to be missing out on any logic here" ... wisdom to take with you

I like how instead of actually doing research on helicopter and its principle, he just use a pre build thing and reverse engineered it

You should just try to break the game. Like seeing if you can defeat the engine within the parts limit or what construction takes up the most resources ^^

Super sonic strongest shape should be incoming

The fastest helicopter ever is the bell 533. Which goes 316 mph or 275 knots.

biblically accurate helicopter

Maybe a Supersonic Turtle could be an idea for a video haha.

So you broke records going horizontal and upwards? Now you need to break a record for DOWNARDS! Make a creation that gets you a lot of height and see how fast you can descend with it!

Hey idk if you noticed but im pretty sure your helicopter motors at the side of the heli were counter rotating thats why you couldnt pitch your nose down mid fligth

the control engines in the first one were spinning opposite directions so they cancel each other out

You should try pressing "Backspace" when you want to get to the ground.

the gyros was spinning the oposit of each other love the videos

Question: You say that helicopter blades are omni-directional, meaning it doesn't matter what direction they face unlike a conventional aero wing. If this is the case, how do they generate lift?

Should totally build a supersonic Paddy next.

Wow the supersonic helicopter exists! For about 0.4 seconds before it spontaneously combusted.

Are you able to put helicopter engines in series? Like attached the output spinning part to a platform that you can attach another helicopter engine one?

Build idea, you may have done it already; Build a supersonic vehicle using the strongest shape

Oh yes using super sonic in the title when sonic frontiers releases classy 😂😂 /j

Amazing content RCE How bout a supersonic bridge?

You attempted more rotors in a vertical formation. Maybe rotors side by side (think of chinook helicopters).

I wanna see this guy play the literal Space Engineer game

Thank you SO MUCH for the flash warning! Please include those going forward

well, i guess the game doesnt let you make supersonic helicopters, but does it let you make supersonic catapults? (able to launch items at supersonic speed)

the helicopter at the start was the best helicopter in this video

the issue with most propeller Aircraft is actually the sound barrier. Propeller tip speed is the limiting factor for rotation speed as the once the prop tip starts to go supersonic it stops producing thrust (due to loss of laminar flow) and halts acceleration (blah blah real world physics). For the game The craft may be only going 120mph but the prop tip speed is probably closer to 550mph. So without the prop spinning waaaaaaay faster than supersonic there is no way to get the craft go go close to that speed. forget helicopter where a lot of the thrust is used for lift...try building a prop driven car now all thrust is for speed and you still run into the same issue. prop tip speed is waaaay faster for a given craft speed, so prop speed needs to go way above supersonic before you craft has any hope of going supersonic.

You could try the blades on the left and the right side of the cockpit like modern military ones. Also the banana style helicopters like back in the day.

Supersonic Dong? 😏

12:52 Lookin pretty strong

0:30 IS THAT THE GRIM REAPER

Funny enough, the most recent dev post on steam is "How to build a helicopter"

Would love for you to give this one another go if you figure out how to do it

Next build the smallest functional vehicles of every type, e.g. Smallest rocket, car, plane, boat, etc.

you summoned the Trailmakers kraken ... several times o.o

Remember kids, architects may have designed a bridge, but the engineer engendered everything into existence

Supersonic TANK

Great video once again!

Try adding engines to the back of the helicopter to push it forward

8:02 So top one rotates clock-wise. Why are the wings facing the counter-clockwise direction then? Am I missing something?

I would love to see him make an ornothoper.

Would love to see a minimalist build. Smallest thing that can be supersonic. Then largest.

Wonderful

The translation of the word helicopter is helico meaning the mechanism that turns and pter meaning wings so helicopter . In Greek it would be helicoptero .