This WOULD Have SUNK Our BOAT!

Рет қаралды 103,238

Жыл бұрын

We are SO glad we went through the struggles of replacing the exhaust hose because seeing the condition it was in there is know doubt that it could have caused catastrophic problems if we didn't change it!!
and two much easier and way less frustrating projects were also completed! Mountain Myst officially has her name back on and Starlink is up and working!
Let us know if you have any questions!
Thanks for watching!
Do you want your very own Tula gear? Check out The Tula Shop! - tulasendlesssummer.com/shop-tula/
Want a first look at our videos, up to date location information, and Tula Shop discounts? Become a Patron for all that and more! - / tulasendlesssummer
*Some of the links below are affiliate links and we may earn a small commission if you purchase something through the link.*
For a first-hand look at our favorite boating essentials, camera gear, safety equipment, navigation setup, dive equipment, suggested reading, and much more visit our Amazon Affiliate link. www.amazon.com/shop/fikitensup
Are you eyeing Sierra's leggings or Billy's board shorts?? You can find all our favorite Waterlust apparel here: bit.ly/waterlust_tula
For all your catamaran needs, educational articles, and a real live person to talk to about any boating, sailing, and/or equipment questions you may have, check out Catamaran Supply: www.catamaransupply.com/?ref=...
If you are trying to reduce your waste and protect our oceans check out the Plastic free shop :) www.catamaransupply.com/colle...
Are you into the nitty gritty of how things work, product reviews, and the more technical side of boat life? Check out our other channel, Tula’s Tech Talk! - / @tulastechtalk
Can’t get enough of Jetty the Gypsy? She has her very own channel! Go Subscribe! / jettythegypsy
KZfaq is awesome but we are also on Instagram and Facebook. If you follow us on these platforms you are invited to Q&A’s, polls, and are often much more up to date on where we are!
Billy’s Instagram: @TulasEndlessSummer bit.ly/instabilly
Sierra’s Instagram: @TulasEndlessSummer_Sierra bit.ly/instasierra
Jetty’s Instagram: @JettyTheGypsy bit.ly/instajetty
Tula's Endless Summer Facebook: tulasendlesssummer
All of our most frequently asked questions are answered here:
tulasendlesssummer.com/tulas-e...
A few of our amazing affiliate partners!
Waterlust - bit.ly/waterlust_tula
Siren Marine - bit.ly/SirenMarineTula Use code "Tula10" for 10% off at checkout
Raw Elements Sunblock - bit.ly/RawElementsTula Use code “Tula” at checkout for 10% off!
Kiteboard, Wing, Foil, and Paddle Gear - bit.ly/AdventureSportsUSA Use code "Tula"for 10% off!
Hobie Polarized - bit.ly/HobieShades Use code “HPTULA20” for 20% off!
All our music is licensed from Epidemic Sound www.epidemicsound.com/referra... unless otherwise noted here
#tulasendlesssummer

Пікірлер: 273

@jerryschippasr3147 Жыл бұрын

I just ordered my first Tula shirt!, actually my first item ever off a KZfaq channel. Your site was very user friendly thank you for that courtesy. I just think after this episode the shirt should read “ I love watching Billy and Ciera do boat work” 😂

@Spudeaux Жыл бұрын

Well, that was... exhausting 😂

@webheadusa9377 Жыл бұрын

Mwahahahahaha!

@RAMYSWAY Жыл бұрын

Definitely change the hole hose. It’s only as good as the weakest part. Definitely remove the wrapper on the hose also. Changes in temperature will keep humidity under the wrapper causing the hose to get compromised. 👍

@peterrahill9263 Жыл бұрын

1.1K+ LIKE of view 6,899... here we go... (hmmm... do you really mean 'know doubt'...? nah, just a typo.) Making it seaworthy is definitely PRIORITY ONE. Good job, you two.

@edgarmuller6652 Жыл бұрын

Glad you replaced to whole exhaust tube. When you were saying that you guys were only changing one part, I was thinking “ Oh nooooo”. Good job.

@j_rainsgoat3929 Жыл бұрын

Good choice changing the whole tube. When someone is ready to purchase you $100 boat this new exhaust will help seal the deal.

@MrBIGBOBBO Жыл бұрын

Those exhaust hoses would have given me nightmares. It is such a flustrating job. Everyone's happy to see that one crossed off the list. Way to go.

@MikeBanks2003 Жыл бұрын

I like dry exhausts for powered vessels. That means using cooling water and radiators, but NOT having water exiting through the exhaust t system. I use truck silencers, which vent into pipes within deck mounted Samson posts. It is the system used by most commercial vessels, and sometimes the exhaust pipes are water-cooled or air-cooled EXTERNALLY. The LAST thing I want is sea water connected in any way to my engines. Fresh water only, via separate heat exchangers with additional thermostat controlled electric pumps independent from the engine driven seawater pumps. Engine driven pump or impeller fails, temperature of engine reaches 85 degrees, electric pumps turn on and pump failure/engine overheat LOUD alarm sounds.

@totoatc1820 Жыл бұрын

If you are worried about waves at rear entering exhaust fit rubber flaps to outside of exhaust pipe. You may need to cut square to fit but they will allow exhaust and water out and stop water from entering. They are common on speed boats and can be purchased from most marine shops. I fitted one to my trawler.

@billyhale7963 Жыл бұрын

Just make sure to retighten the clamps after a few heat cycles!!!

@JB-mn2gu Жыл бұрын

If you wanted to inspect the inside you could use a borescope. You can get them for under $100 . Would be great for looking in those places that are hard to fit in.

@wjhann4836 Жыл бұрын

100$ - I have one with 5m (15ft) cable and Bluetooth for some 20$

@elrobo3568 Жыл бұрын

I got fed up with 1.3 meg speed and ordered Starlink. I had to wait for about a year and finally got it. It hooked up really easily and my speed test showed in the 300megs. The modem took a dump in about a month but they replaced it with no charge. What a difference.

@driverguy7 Жыл бұрын

Thank you for sharing with us the realities of rehabbing an older boat. Keep up the good work...

@MarkLawrenceKiefer Жыл бұрын

Could you guys put together a video that talks about what you spent in overhauling this boat?

@johnnylightning1491 Жыл бұрын

Lesson learned, exhaust hose needs to be replaced all at once. Kind of like cars, if you have to replace some of the exhaust you will probably be replacing the rest of it in 6 months. Do the whole thing at once, it's easier. Keep the good stuff coming guys.

@todddunn945 Жыл бұрын

An equally dangerous aspect of that old hose is that a crack will let exhaust into the aft cabin. If smeone was sleeping in there while the engine was running a small crack could put enough exhaust gases into the aft cabin to kill them. I was thinking - Just replace the entire hose - and was really glad when you went ahead and did it. Not a fun project, but definitely needed.

@3458bigbob Жыл бұрын

I was watching in horror when you said you were going to use the old hose, thank god you changed it 😯. Never mess with boat exhaust systems on boats always replace old hoses ! If you have not come up the west coast to my area NW, its some of the roughest water there is so be careful.

@MooreFishing-ky3wq Жыл бұрын

I’d have replaced the whole thing just to know it’s new . I’m glad you did !

@markstevens6359 Жыл бұрын

Great to meet you today on your rainy walk with Jetty on C dock. Hope your survey goes well.

@seastate52 Жыл бұрын

I guess you can add exhaust cuppers if you are in doubt of water back flush. I have plugs for nine for mine, just in case of a failure. keep up the good work.

@bobjones8864 Жыл бұрын

The pure absolute joy of doing boat refit work.

@Mrflynlow Жыл бұрын

I just went back over some of your older videos. I know your an expert kite boarder and surfer, I would really like to see more videos of your athletics. I know your not just walk around scenery types, but I think you should show more of your athletic stuff. Your still the very best sailing channel and now boat repair, whatever your doing your doing it to the max.

@Craigs_car_care Жыл бұрын

So glad you ended up replacing the entire exhaust system. So much safer for so many reasons.

@jeffreyanderson2909 Жыл бұрын

Great work! I felt your pain, but I would have been swearing and shouting. Calm and patient is inspiring. And, not just a water hazard... leaking exhaust into the cabin would create a carbon monoxide problem.

@chrisoakey9841 Жыл бұрын

you guys should replace some of those broken acoustic tiles with PVC versions. they won't be damaged as quickly in that environment.

@leftcoastcruising7080 Жыл бұрын

We had to replace the port side exhaust hose on Midnight Sun this year, and it was a bear to do… I’ll admit, I looked at it pretty hard, and then paid the boatyard to do it. 😂

@youknowme8578 Жыл бұрын

Billy, even with a new pipe, just add a little dishwashing detergent, it will slide right in. BTW, proud of both of you, waiting for the auction to start. Edit: I realize you replace all of it, that was smart. However... If one part looks bad on it, it's all bad. lucky you are a smart young man.

@Psychobilly Жыл бұрын

😂 @Billy, persistence paid off! Jesus that was a BIAOCH

@richg3411 Жыл бұрын

Good to see you used two clamps.

@para1324 Жыл бұрын

You two work very well together. That was indeed an important issue. 👏💪

@fmh357 Жыл бұрын

One very important lesson I've learned in life is when it counts don't cheap out.

@michaelcanto6175 Жыл бұрын

Even with RV Tires we have discovered Rubber has a Life-Span, like you said, It's better to be safe that sorry!

@obxbigdave Жыл бұрын

Just watched a few minutes of a Brady bunch episode. Ciarra is A clone of Jan Brady😁 On next episode ya gotta say Marsha , Marsha , Marsha !! You guys are the best. Love Jetty😁

@benpowitzky4820 Жыл бұрын

That must be hell doing the exhaust on that boat. I feel your pain. I am looking forward to seeing you guys set sail in the next couple of videos.

@tombaker3081 Жыл бұрын

I can't help but wonder what the reaction the previous owners have if watching these. I know I'd be very excited to see my previous boat coming back to life.

@TheAtma50 Жыл бұрын

Too much work can make life dull .... Have you guys been able to go Kite surfing lately or even on a decent hike? Look after yourselves because without your videos my life is dull!! Stay Safe & Fair Winds!!

@jerryschippasr3147 Жыл бұрын

My shirt came in!!! Spot on. Nice shirt and delivered in a reasonable time frame. I love your videos and your ambition.

@johnjackson8386 Жыл бұрын

I knew there was something about yall I liked. I grew uo where your from. Jupiter FL was a neat little town

@jmp.t28b99 Жыл бұрын

Very good video. I replaced one side of exhaust hose on my DeFever44 5 years ago. Did the whole piece without cutting it into pieces. Takes two people to do it though. I had to remove some shelving in order to have room to snake it through. I used the same high quality clamps as you did. The hose fit the exhaust exit fitting with a little soap, but very little room to get two hands on hose to push it on. Still have one more to do.

@applicablerobot Жыл бұрын

Tldr: you can trick cellular carriers into not throttling hotspotd by increasing the default ttl on your laptop to 65. Easy on linux, idk about osx or windows. Hotspots throttle connected devices by checking the ttl parameter on the packets coming from the phone's modem. Ttl is decremented every time a packet passes through a router. By default packets originating on your laptop (most devices) will have a ttl of 64. After passing through your phone (hotspot means it's acting as a router) it will gave a ttl of 63. The cellular carrier can see this and throttles packets received from the phone with a ttl less than 64. So all you need to do is increase the defauly ttl on your laptop to 65 and the carriers think your laptop's traffic is coming from your phone. Throttling gone instantly. It's usually more practical in the long term to get a cheap wifi router to connect to your phone (ideally over USB or ethernet with android 12) and install openwrt on it. Then the router can rewrite the ttl on outgoing packets (a 3 step change with openwrt) and you don't have to change your devices. It's more seamless but requires a bit more up front effort. Can also integrate starlink and cellular to have failiver or load balancing, but that's more complicated.

@BoatingJourney Жыл бұрын

We're glad you replaced them before heading into the PNW waters. Looked like a tough job. Great work!

@dougcole7677 Жыл бұрын

Good job, y'all. I replaced the exhaust hoses on our boat two years ago, one of the worst jobs I have ever done. Glad it only has to be done every 15 years or so.

@darrylb4048 Жыл бұрын

The exhaust hose. Right from the start I was figuring....replace the 60 year old hose!!! lol

@pipercolearchitects Жыл бұрын

Good info, solid episode

@adrianlivingstone8520 Жыл бұрын

I suppose it goes without saying(saying it anyways) that a rust converter on the rust is a must-do as well!

@bensmith200 Жыл бұрын

While watching and you first talking about not just replacing the whole exhaust system. I was thinking oh no that's a terrible idea just should replace the whole thing and then 2 minutes later you said you were replacing the whole thing.

@davidhakes3884 Жыл бұрын

With ALL rubber products the SUN or HEAT is your friend when fitting it. I watched a video on hose clamps on YT "Test Farm" and I think all boat owners should see it a real eye opener and it WILL save you $$. Take care you two.

@wcgolfpro Жыл бұрын

Great job guys a little frustrating but at least Sierra’s gonna step up and work on her birthday ! 😂❤ cuddles to Jetty!

@wjhann4836 Жыл бұрын

If you will drive the boat for a while think about an addition to the engines: I got an idea from an old guy who told me to get a temperature sensor at the exhaust elbow (perhaps inside). There if normal the temperature gets never over 40deg C (some 100 F). If that temperature raises significant you lost your cooling. BUT - when you see that, you might have some minutes to operate before the head temperature gets too hot - so sometimes the little time to a disaster. Also: If you see that temperature raise and switch off, a damage to the engine head should be avoided.

@robertscranton8293 Жыл бұрын

Love it...what a great pair you all make.!!

@cjbotkin1 Жыл бұрын

Carbon Monoxide detectors are cheap and even battery powered. A must.

@marvinthomas8165 Жыл бұрын

They even make exhaust tip check valves that can be installed to prevent things from entering your exhaust pipes as well.

@rapper4mpi Жыл бұрын

I could feel the pain and frustration of a job that takes way longer than expected. Thanks for sharing, love the videos!

@jimpalmer1969 Жыл бұрын

Glad to see you are replacing the entire exhaust hose. Very important safety item. Keep going, you are doing a great job.

@adrianlivingstone8520 Жыл бұрын

In my part of the world, what you call T-Bolt clamps we just refer to as Stainless Hose Clamps!

@timphillips7037 Жыл бұрын

Love this new boat series been watching it 😀

@keithh3463 Жыл бұрын

It is amazing all the two of you accomplish

@williamconway1287 Жыл бұрын

Just a small bit of advice . When you have to cut a bit of wire like in the exhaust hose . Get a vise grip typeof tool , and at the bottom of the jaw there is a cutting edge that works wonders .

@muskyful Жыл бұрын

Good teamwork ! I wouldn't worry about those splices.....probably a good idea in 2 sections for when its time to replace again. I would add exhaust flapper valves to the exhaust outlets at the transom to prevent backflow getting into exhaust pipe.

@Jester123ish Жыл бұрын

Yes, this, the danger is seawater could backfill the exhaust pipe all the way to the motor, causing possible hydrolock and other damage.

@jus4funtim Жыл бұрын

Not sure if anyone has suggested it yet, Pick up a carbon monoxide detector about $20 bucks and mount it near the old hose

@William_Hada Жыл бұрын

That clear plastic wrapping on the hose probably protected it all these years from ozone exposure. Ozone and UV light are the major causes of dry rot on rubber.

@daveross935 Жыл бұрын

Very important, valuable lesson learned. Good Job!

@henriaube2278 Жыл бұрын

Awesome work, folks. You've done an outstanding job of rescuing that boat using your amazing boat yoga skills......love your channel.

@skoootles Жыл бұрын

Now I know what a T bolt clamp is. I learn something new everyday.

@williamhaslund312 Жыл бұрын

Great work on your boat. After having a DeFever for 18 years a bit of advice. Make sure that the injector tubes from the pump to the injectors do not get bent and are touching anything on the motor. They can and will wear thru due to motor vibration. cost about $100.00 each. Easy to bend back to proper shape. Also be careful using the T bolt hose clamps You can tighten them so much that the fiberglass inside the hose can be crushed. Leaking water from the outside is bad but exhaust gases and water is worse! Good luck

@flashlightbug Жыл бұрын

OMG! What a nightmare! I bet you're glad it's finally done!

@vernholmes7940 Жыл бұрын

It's always something when doing boat repairs! Good job despite the challenges.

@thomasvantrabert5342 Жыл бұрын

Amazing what a team, you guys are so cool the way you work together, I am sure it is not always smooth, but you are such good teachers

@jeffreylane6098 Жыл бұрын

Whew!!! Another nasty patience testing job done!!! You both rock!!! Oh and Jetty rocks too!!! :):)

@patrickhampton6248 Жыл бұрын

Great team work

@robertthompson9455 Жыл бұрын

You can check the inside of your pipes with a bore scope...

@nfhmUtube Жыл бұрын

Good Call!

@Cajundaddydave Жыл бұрын

So glad you guys changed out that nasty exhaust hose. A total PITA but like you said, it puts the boat at risk of finding the bottom in a heavy sea. I hate working with that stuff but when raw water mixes with corrosive exhaust gases it rots the hose from the inside out over time. At some point it just has to go. On the home stretch now, just keep checking off that list. Your determination and work ethic is quite rare these days. Cheers!

@bubbagail7450 Жыл бұрын

That's the most pain in the butt, grunts and groans I have heard from you on the boat projects. That one had to be pretty tough. Good job Billy.

@denniskittle8751 Жыл бұрын

Damn, I love you guys! Billy and Sierra, you are awesome and amazing. Look forward to seeing all your videos.

@yardarm5 Жыл бұрын

Brave moves. Great perseverance 🎉

@chasman33 Жыл бұрын

Yes and thank you, I have lost friends that had “new” exhaust fail offshore. This is vital

@youtoob1234567 Жыл бұрын

Replace all the hose and use the first bit you bought as spare for later.

@ThoughtfulWander Жыл бұрын

Like the name of the boat! Awesome! 👍👍

@tomdrummy4984 Жыл бұрын

I’m glad you got that done before I buy this boat. 😃😎👍

@josephwilliamson1489 Жыл бұрын

I've had mine for about 6 months and they are fantastic

@cartertanya1258 Жыл бұрын

Usually a gooseneck is fitted at stern to stop inflow

@rockercover Жыл бұрын

What a job changing out that hose. With salt water running through it, understand why rubber hose is the material used. Forget if stainless steel is impervious to salt… Water will help keep the exhaust temp. down.

@robertrabhudsonhornet5869 Жыл бұрын

That's good you found that it was all bad know and get it all replaced before you had problems of water getting in the boat it will give you a piece of mid

@22Mikeref Жыл бұрын

Hope you like your Star Link, I have had mine for about 8 months now. I wouldn’t give it up for anything. The speeds are much faster, and I feel it is worth the monthly fee we pay. Let everyone know how y’all like it.

@stopthephilosophicalzombie9017 Жыл бұрын

How much is it monthly?

@michaelanderson2742 Жыл бұрын

Y'all are learning so many good lessons as a young couple has a lot older than you before I realize that inner walls would collapse like that most of the time the outer one looks good the other side is just gross saltwater love it or hate it

@ysesq Жыл бұрын

for starlink splice a poe cable and dump the router. saves a ton of power.

@markbond6196 Жыл бұрын

If I may share some education. The chemical compound of rubber in the exhaust lines breaks down over time. Nothing you can do about it, that's just the way the chemical makeup of it is. Look at RV's. If your not a full timer, you'll never wear out the tread on your tires. Unfortunately most people think if they have good tread, then not to worry. Then when they hit the road, blowout!....Eight years would be the max on that type of rubber being very much the same as tire rubber. The chemical bond of the rubber weakens and seperates.

@joelbrown4110 Жыл бұрын

Great video. Maybe consider a flapper on the exhaust outlet.

@edweikal5857 Жыл бұрын

I just finished a 40 footer that had set for years in the marina. Well never finished but very usable now. We are at John Wayne Marina Sequim, WA. drop us a note if you are in the area. We can do the San Juans!

@kevinmartin3859 Жыл бұрын

Well done you two glad you renewed everything in the end and are now safe from flooding the same happens with a car exhaust they rot from the inside through condensation and exhaust fumes so what you did in the end was right I'm so glad the connection would no slide otherwise you may have thought that it was okay and left as okay with the potential of possible sinking so well for sorting it out

@SSSCya Жыл бұрын

One thing I learned long ago is to fit all your pieces together at the store when you are buying them. I would have even brought a scrap piece of the old hose with me. Saves a lot of time and trips to the store.

@auroraaustralis5470 Жыл бұрын

Awesome shares grateful

@rickcreel3657 Жыл бұрын

The worst enemy of rubber is ozone. When rubber is covered with silicone spray it keeps the ozone away and it stays like new. They told us Starlink was not in our area yet but I bought it anyway. You are coming in loud and clear so I switched off two landlines and the internet. Now my monthly bill went down $50.00 per month. In 14 months the savings will pay for buying the system.

@vincentcarrano6329 Жыл бұрын

Great effort on the exhaust. Looked like a real punish

@cozyafloatisme Жыл бұрын

Love Billy's final comment for boaters to check the inside and out of their exhaust hoses..."don't know how you're gonna check the inside!" My 1976 CHB trawler could have original hoses, so I guess I'll find a way, fortunately it's a single engine boat. Thanks, Billy, for the advice and fun of watching you do the "twist" above the fuel tank and inside the cabinets. I guess I'll get to do the same dance myself :( See ya in Friday Harbor! Jim Morrison

@wjhann4836 Жыл бұрын

When I saw you working in the cabinets in the aft cabin my thought was: Put some insulation around. Could isolate the noise.