NO MORE NOISY SKATES

Рет қаралды 2,942

Күн бұрын

In this video, Ivo tells you how to prevent your skate from rattling
/ thisissoul
Website: www.thisissoul.com/
IN THIS VIDEO
1:18 tighten
1:37 Wheel core
4:44 bearing
7:30 buckle
10:24 squeaky cuff
11:57 soul plate

Пікірлер: 31

@patrickbettencourt3083 Ай бұрын

Tighten every fastener on your skates as much as you feel comfortable with. And if you buy new frames, they usually come with wall spacers and wheel spacers, so use the hardware that comes with your frames and metal buckles are usually a bit noisy. I run plastic buckles on my Mesmers.

@campish3852 2 ай бұрын

usd carbon and cj has foam on the bottom of the boot to eliminate sound

@t3chno0 4 ай бұрын

I've put abs foam in my Tim frankens sandwiched between the shell and the soulplate.. You just have to trim it quite well so it doesn't show around the sides.. I guess carbon boots would be the same👍Thanks Ivo👏

@Thisissoul 3 ай бұрын

Great tip!

@Ka17788 4 ай бұрын

Thank you! 😊

@Thisissoul 4 ай бұрын

You're welcome 😊

@NitroCigarette 3 ай бұрын

What if i can't really tighten my top buckle almost at all, but literally everything else fits just fine? (I can buckle maybe 3 -4 clicks) Worried I might torque the buckle and rip it back out through the cinch during a landing if I lean my shin too far forward

@Thisissoul 3 ай бұрын

that should not happen. 3-4 clicks is enough. You can always buy a longer buckle though! www.thisissoul.com/collections/top-buckles/

@SerialWheeler 3 ай бұрын

Excellent topic. I actually moved my main setup to aome THEM 908 Sean Darsts and I can confirm that there are A LOT of squeaky noises from both the cuff and soul plate, compared to the silent (and now broken) K2 Unnaturals. What sort of material would you recommend glueing to the soul plate? Thin rubber/neoprene or anything better? Have a great day 🤘🏻

@Thisissoul 3 ай бұрын

any fabric will do. if you have all the options then a 2-3mm piece of EVA foam would be best I think.

@manuelvallano3071 4 ай бұрын

nice one! gonna try on my fifth elements, now waiting for some fr1 deluxe to arrive!, is the 45dgree buckle the one that may come a little loose and sound or both? thanx again for the be safe blading tips, allready waiting for the next vid mate!

@Thisissoul 4 ай бұрын

good to hear!

@phillipp1399 2 ай бұрын

Intuition liner noise? You mentioned waxing, like the cuff of the aggressive skate you put on in the video. Really, wax the outer surface of the liner or did I misunderstand? Thanks for always great content!

@Thisissoul 2 ай бұрын

you can wax the liner, but also the shell underneath the cuff often is what makes the noise

@xywy8 4 ай бұрын

USD carbons have this foam glued to the carbon boot, the iqon have it glued to the soulplates i think because of popularity of "wizard frames" mount to the boot without the soulplates, and the Seba dont have this foam ;)

@Thisissoul 4 ай бұрын

correct!

@bxl2012 4 ай бұрын

Noisy, not nosy... 😂

@darkoale3299 4 ай бұрын

The skates are noisy because they keep gossiping....

@This_new_handle_system_sucks 4 ай бұрын

Finally a tutorial about how to deal with nosy skates. I have a pair that can never mind their own business. 😒

@Thisissoul 4 ай бұрын

Oops, haha fixed ;) Thanks.

@IsaacGallegos 4 ай бұрын

My one regret is that I have but one like to give

@danielreigdiaz1373 3 ай бұрын

Offtopic, but... Which wheel do you rainskate with?

@Thisissoul 3 ай бұрын

Undercover Team or Rollerblade Hydrogen are the best wheels, in the rain or not in the rain. A Good wheel is a good wheel.

@spicyananaspizza 4 ай бұрын

My cuff bolt has a solid head. I can't take it off to deal with the squeaking noise T.T

@Thisissoul 4 ай бұрын

aah that makes it more complicated for sure. maybe waxing the liner will solve something.

@VictorAndScience 4 ай бұрын

Not Ivo getting a haircut 😢

@Thisissoul 4 ай бұрын

haha it will grow again. dont worry

@essefer8709 4 ай бұрын

Intuitions like to be noisy.

@xywy8 4 ай бұрын

You can wax cuff part of the liner or attachment, or wax inside the boots;) problem solved like in these razors from video :)

@Thisissoul 4 ай бұрын

correct!