Those Cheap Ebay ADJUSTABLE PRELOAD Fork Caps

Рет қаралды 25,543

2 жыл бұрын

Forever on the lookout to find the high value option, I've purchased these cheap Ebay adjustable preload fork caps to test on the Warpig DR650. This is a quick first look, rundown and first impression of these cheaper chinese preload fork caps and will be doing a thorough test over the coming months to see once and for all if they are a viable value option.
Check out our verdict video after some serious testing here
• Ebay Adjustable Preloa...
Below are the items I use to produce these videos. If you are interested please use the Amazon affiliate links below, it won't cost you any extra but gives me a little kick back and helping hand. We all know how this works by now! :)
Thanks!
GoPro Hero9 Black amzn.to/2Wvqp05
Hero9 Battery amzn.to/3mMlXVl
Hero9 Mic Input Battery Door amzn.to/3DtDojn
Hero9 Mic Adaptor amzn.to/2WDaVHi
HelmetCam Microphone amzn.to/3gHkMTl
Olympus OMD Em5 III Black amzn.to/3t1npo3
Olympus OMD Em5 III Silver amzn.to/38til22
Panasonic 12-32mm Main Lens amzn.to/3kUl2Qj
Laowa 7.5 WideAngle Lens amzn.to/3DGaay3
Olympus 45mm Long Prime amzn.to/38nrZDw
Em5 III Spare Batteries amzn.to/3BqFYVE
Braided USB C Cable amzn.to/3mMkKgL
Mini Flexible Tripod amzn.to/3jsJqJ2
Mini Tripod QR Clamp amzn.to/3gLcIRE
Mini Tripod QR Plate amzn.to/3Dyw7ic
Mini BallHead amzn.to/3BqgI1z
TIAKIA Smart Phone Holder amzn.to/2PFGfBk amzn.to/3gM7ODN
RYYMX Smart Phone Holder amzn.to/3cwIlML
Samsung A12 SmartPhone amzn.to/2V17ae1
UltraSlim Gel Case amzn.to/3gOKe9k
#preload #dr650 #adventure
--music-
Thanks to
www.freemusicarchive.org
www.audionautix.com
www.royaltyfree-music.com
www.freesound.org

Пікірлер: 85

@SKIDSnSTUFF 2 жыл бұрын

I look forward to hearing from others who have had experience with the adjusters, particularly if you have or have not found the adjuster bolt to back itself out while being ridden. Cheers for any insight and thanks for watching.

@DJIInLondon Жыл бұрын

did it kill you ?

@SKIDSnSTUFF Жыл бұрын

@@DJIInLondon not yet

@BillySBC Жыл бұрын

You might be able to drill a small hole through the 8mm top nut and the larger 24mm bottom nut and safety wire the top nut to the bottom nut once you get the preload you're happy with. This will stop the adjuster bolt from backing out.

@SKIDSnSTUFF Жыл бұрын

Loktite done the trick, have made a follow up video on this

@veltruski 2 жыл бұрын

I have these on 2019. V-strom 650, no problems at all. Paid 25$ for them. They're tight, don't unscrew and work just fine. I've had them for a year now.

@SKIDSnSTUFF 2 жыл бұрын

They're pretty sweet

@kylewilliamson8043 4 ай бұрын

Same here

@renegarcia1807 8 ай бұрын

Thank you very much man your video was very useful for me good job!!!!!

@thegutsyninja8851 Жыл бұрын

i added an extra tighter oring that fixed it perfectly and created a better seal overall. less than 1.50 at the local hardware store

@SKIDSnSTUFF Жыл бұрын

awesome tip, ill look into it when i finally get around to taking those forks apart again, cheers!

@ontheverge5944 2 жыл бұрын

Good work, looking forward to see how it ends up

@SKIDSnSTUFF 2 жыл бұрын

Thanks you slow

@easydeon 2 жыл бұрын

Thanks for sharing your experience with this and hopefully they will do what they are supposed too and i can upgrade from the DIY spacer and 15w fork oil.Not many choices out there for us budget bikers ha ha.

@SKIDSnSTUFF 2 жыл бұрын

Here's hoping! I recommend getting rid of that 15W syrup, shits nasty. I found 7.5W to be the go.

@easydeon 2 жыл бұрын

@@SKIDSnSTUFF Need to lose 20kg of gut first and the acerbis tank also adding to it so was getting a lot of rebound noise when the weight came off so went for the thicker oil and it has made some improvement. Thanks for the advice though.

@bikersoncall 2 жыл бұрын

I use a sharpie/marker to make it obvious where the bolt/nut etc is, when in the 'correct' spot, regarding suspect nuts/bolts etc. I think finding the right lock nut, so you can lock the adjuster down, and loosen as needed for further adjustment would beat using locktite. Even when you think you have it perfect, locktiting it will make if more of a hassle to change later, pretty rare that one setting is going to be perfect all the time imv.

@SKIDSnSTUFF 2 жыл бұрын

Since adding loctite often adjust the setting whether or not the bike is loaded and the cap has been accepting and holding the setting fine. Thanks for your analysis 👍

@newbs70 2 жыл бұрын

I remember my old 1991 DR came with these. Strange how the DR has gone backwards since then. There is a few other differences compared to 2013 DR. Good video mate.

@SKIDSnSTUFF 2 жыл бұрын

I wonder if they experienced problems with that iteration or just tried to simplify. Definitely a handy adjustment to have.

@crewzincool 2 жыл бұрын

Nice mate keen see how it goes

@SKIDSnSTUFF 2 жыл бұрын

Will be sure to get back to yall about it, things are looking more positive now

@badoldbiker368 2 жыл бұрын

Hey Skids, looking forward to seeing how you sort this one out!

@SKIDSnSTUFF 2 жыл бұрын

Here's to hoping it's positive!

@badoldbiker368 2 жыл бұрын

@@SKIDSnSTUFF Yeah if you get it sorted it will be a very cheap addition, if not just chuck it in the shed, eventually it'll come in handy for something.

@tungstentwohundredandtwent7007 2 жыл бұрын

The colour on the large washer is more indicative of cad plating or passivating than heat treatment. I’m intrigued by how the adjuster screws are unwinding. Are the threads jumping or stripping? I went with the Cogent version a few months and they’ve been flawless, but significantly more expensive obviously. It’s amazing how much tuning is achievable with a few turns of adjustment.

@SKIDSnSTUFF 2 жыл бұрын

I can only guess without disassembling to check but I don't believe it has stripped the threads at all. Screwing action is still smooth. I'm under the impression the spring is spinning or the vibration is the culprit. Thanks for the explanation 👍

@rupertsuzuki3376 Жыл бұрын

Same thoughts, I bought the Cogent as well and have zero issues with anything relating to them. Theirs takes a 12mm wrench, have 6 bars of height adjustment and you don’t see the threads like on yours - might not have any bearing on this but those are differences I noticed. No name Chinese products are known for wildly ranging quality though, some are great, some a hard no…for the same thing. An indexed lock washer or safety wire could fix your wind out issue but what a PITA. Good video, thanks for the review.

@adamms96 2 жыл бұрын

3:06 made that look so easy lol....

@armyretired28 2 жыл бұрын

I use Cogent one's on my pig, never had them ever back out!

@SKIDSnSTUFF 2 жыл бұрын

These don't back out any more either.

@DeadRoman 2 жыл бұрын

The coating on the washer is called alodine. It’s a chemical bath.

@SKIDSnSTUFF 2 жыл бұрын

Thanks Ceaser. After some locktite the caps have been great for fine adjustment and ease of balancing the bike out when loaded.

@DeadRoman 2 жыл бұрын

@@SKIDSnSTUFF I snagged a set for the Harley. We will see how it works out.

@DeadRoman 2 жыл бұрын

Interested to know how these ended up working out.

@SKIDSnSTUFF Жыл бұрын

Coming at ya next week!

@Dastardly_X Жыл бұрын

🤘🏻 🏍 🤘

@justgjt 2 жыл бұрын

The gold colour is just a passivation coating to limit corrosion. Just wash your hands arfter touching it and before you eat, smoke etc.

@SKIDSnSTUFF 2 жыл бұрын

I will eat passivation coating all I like, you're not my mum. Thanks for the insight 👍

@carletto_au 2 жыл бұрын

mounted on my transalp 650 - no problem so far

@SKIDSnSTUFF 2 жыл бұрын

Thanks for the feedback Carlo

@bigjj974 2 жыл бұрын

Sorry if I missed your follow up video to this product evaluation. What do you think about the product and did the issue with the bolt get resolved?

@SKIDSnSTUFF 2 жыл бұрын

Still haven't finished the vid. The caps are fine, loctite or thread tape stopped the spinning

@Ramjet257 2 жыл бұрын

I was about to ask if the internals of the adjuster was notched with a spring loaded ball bearing to retain its setting, but I think I can now assume not.

@SKIDSnSTUFF 2 жыл бұрын

I will disassemble and check that during testing when i get a chance. Will definitely need to do something about it.

@nuttynut722 Жыл бұрын

Wow, Owen Wilson's brother?

@SKIDSnSTUFF Жыл бұрын

Wow

@FelixCarrasquel 2 жыл бұрын

Nice video, any update on these caps ? Did you solve the unwinding problem?

@SKIDSnSTUFF 2 жыл бұрын

Loctite and thread tape seems to have stopped them unwinding

@FelixCarrasquel 2 жыл бұрын

@@SKIDSnSTUFF Thanks for the update

@KS-sh4xn 2 жыл бұрын

Did you ever resolve the issue with it backing out on it's own? Do you recommend these?

@SKIDSnSTUFF 2 жыл бұрын

Locktite seems to have worked, or maybe it was the thread tape. I like being able to make fine adjustment between loaded and unloaded

@Davett42 2 жыл бұрын

What i wonder is how well it is sealed? like the chance of water ingress?

@SKIDSnSTUFF 2 жыл бұрын

They seem to be air tight so water ingress should not be a problem but will keep an eye on it for the final review. Thanks for the suggestion

@LetsrideJ 2 жыл бұрын

got a set of these sitting on my bench i bought and never used we'll see how they work or can be fixed by ya

@SKIDSnSTUFF 2 жыл бұрын

Will get back to ya after a thorough frolicking

@paralna7755 2 жыл бұрын

After the muffler and this preload piece i am starting to think the cheapest option can be more expensive in the long run lol. I have a set of fork preload adjusters for a harley dyna (Roland Sands) sitting on my shelf so had a quick look at them to see if the spring could turn them but they have a ridge and a groove to stop them spinning. Rough and ready lock wire the centre adjuster lol ps i think the gold washer will bend to a bowl shape eventually

@SKIDSnSTUFF 2 жыл бұрын

Haha buy cheap buy twice! That's interesting the dyna adjusters have measures in place for this problem, I will have to double check these. I also expect that washer to cup over time (one of the original reasons for the test)

@LoganTech98 2 жыл бұрын

Did you do this to a dr650? Was it worth it? Or is it better to buy all new springs?

@SKIDSnSTUFF 2 жыл бұрын

@@LoganTech98 depending on your weight, uprated springs are the way to go with valving to suit

@LoganTech98 2 жыл бұрын

@@SKIDSnSTUFF ok I’ll probably have 170 including gear, would you recommend new springs or the preload adjusters?

@SKIDSnSTUFF 2 жыл бұрын

@@LoganTech98 springs and valving. The preload does a completely different job

@aussiefarmer8741 2 жыл бұрын

I will watch with interest to see how they go. I thought std fork oil was 10w for DR's ??

@SKIDSnSTUFF 2 жыл бұрын

Something like that. I prefer a little lighter

@aussiefarmer8741 Жыл бұрын

@@SKIDSnSTUFF Ok I finally got around to changing my fork oil. Bike has done 12.000ks. Rather than go the adjustable route. I turned some industrial Acetal to 25mm and made spacers on the lathe, so we will see how that goes. I can always remove them. I dont have the 6mm spacers like you showed, only the std metal sleeve. However 25mm preload will just take out the slump when you sit on it and just take that light skipping feeling when riding I suspect. Thanks for the idea of self modification as I wanted to do something but had not made up my mind. Next step rear shock, new spring minimum mod. What are your views on the rear??

@SKIDSnSTUFF Жыл бұрын

@@aussiefarmer8741 if you're too heavy (or loaded) for the standard spring, like most of us, then you will also need a revalve

@mihirshah3151 Жыл бұрын

Hey bro where did you find the fork oil? I can seem to find it anywhere online

@SKIDSnSTUFF Жыл бұрын

I bought from ebay before but usually from an auto or moto store

@peterbeard5362 2 жыл бұрын

Ordered a set for a gen 2 klr. Wrong size too small. They said they were the biggest size they’ve got. Got a refund. Apparently the 14.5 klr got thicker forks. Just beware they’re advertised to suit 2008-2018

@SKIDSnSTUFF 2 жыл бұрын

Good advice thanks for the heads up Peter!

@robjones6741 Жыл бұрын

Hello, mate. What was the long term verdict on these ? Yay or nay ?

@SKIDSnSTUFF Жыл бұрын

Got the video in the can now. Yay

@robjones6741 Жыл бұрын

@@SKIDSnSTUFF Superb mate. 👍

@BillySBC Жыл бұрын

The problem I can see with this is I have dropped my forks down in the triple-trees so they are just about touching the handlebars in order to lower the bike in the front a bit, so if I installed these I would have raise the front end back up again.

@SKIDSnSTUFF Жыл бұрын

The forks can be more readily lowered internally

@BillySBC Жыл бұрын

@@SKIDSnSTUFF Shorter springs you mean?

@SKIDSnSTUFF Жыл бұрын

@Billy SBC no, spring length does not matter. The correct way to lower the fork has a spacer installed below the spring

@BillySBC Жыл бұрын

@@SKIDSnSTUFF You remove the spacer below the spring?

@SKIDSnSTUFF Жыл бұрын

@Billy SBC you Add a spacer underneath the damper rod spring www.advrider.com/f/threads/factory-lowering-a-dr650.176223/