For old times sake, I would enjoy one of your refurbishment, restoration, repair, renew projects on a sad, sorry piece of furniture that is begging for your special touch, attention to detail, concise explanations! 💜💜💜
@mrwood45572 жыл бұрын
Yeah miss those videos
@RagnBoneBrown2 жыл бұрын
Dressing table and two wardrobes still on my to do list and in storage waiting ...
@yoelai2 жыл бұрын
One piece of advice: When you try to do use the router on such a thin piece, clamp another piece flush with the first piece to increase the surface area your router rests on. It's much safer and your cut will be cleaner because the router will be more stable.
@Cradley6842 жыл бұрын
Doin a good job Keith all the best with it, have a nice day Mate !!!.
@RagnBoneBrown2 жыл бұрын
Cheers Brian
@PabloBD2 жыл бұрын
Always love reclaimed wood projects!
@RagnBoneBrown2 жыл бұрын
Thank you
@ValgniTehki Жыл бұрын
Nice job! I once tried DIY, I hit my thumb with a hammer, stood in a paint tray, and nearly cut my fingers off with a jigsaw. That was all in a few hours, and that was when I realised it wasn't for me.
@jonbishop13852 жыл бұрын
Loved every second , a Great tutorial
@fredsmith67252 жыл бұрын
Yay the yellow boxers are back!😆. Great video Keith thanks, your explanations are always easily understood.
@christopherinteriors65212 жыл бұрын
A great video once again. One tip I would give is to order an extra fence for the router from their spare parts list, then you can use both fences at the same time, one on either side of the work piece. I know this works on a lot of routers however it is worth checking first that the rods are long enough and if there are holes on both sides of the router base.
@clickster18832 жыл бұрын
Great use of masking tape to illustrate cut locations and direction (5:30). Very effective way to illustrate what you’re explaining.
@RagnBoneBrown2 жыл бұрын
Cheers
@johnsmith-fz3qk2 жыл бұрын
love a good salvage! 👌🤓
@jeffroberts7602 жыл бұрын
Hall of fame nephew
@stevewoodw2 жыл бұрын
I ruined a screwdriver I'd had for yeras taking out rusty screws that had been in some fence wood I was salvaging - using a pair of pliers or a vice grip is a good idea. Good video.
@3anksy2 жыл бұрын
Thanks Keith
@Rimtatvora Жыл бұрын
Personally i Use rachet strap to replace long clamps works well.
@awantamta2 жыл бұрын
Great job with salvaged wood.
@ianvicedomini26482 жыл бұрын
Very nice joinery there Keith, your auntie will be over the moon with them gates mate 👍🏻👍🏻
@RagnBoneBrown2 жыл бұрын
Thank you
@pteddie69652 жыл бұрын
Keith, you taught me some good, practical stuff in this video. I really enjoyed it. Thanks for sharing this video with us.
@RagnBoneBrown2 жыл бұрын
Thanks
@cazee1002 жыл бұрын
Them yellow shorts again! Gonna have to have a word with Ria about them getting “lost” when she does the washing!! Nice job on the gates though, looking forward to seeing them hung. Stay safe x
@RagnBoneBrown2 жыл бұрын
Wood Preserver amzn.to/3IxOqah (Amazon UK) geni.us/4xWgU9 (Amazon Worldwide) this is my favourite preserver as it protects against loads of stuff - unfortunately I couldn't get it at the time I did this project so you'll see I'm using a different one in the video Polyurethane Glue amzn.to/3uLKgWJ (Amazon UK) geni.us/BW7aV (Amazon Worldwide) Ronseal Fence Life Plus Dark Oak Stain amzn.to/3PjucTM (Amazon UK) geni.us/8a6hbc9 (Amazon Worldwide) 🔨 MY TOOLS 🔨 For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn a small commission from qualifying purchases UK affiliate store: www.amazon.co.uk/shop/ragnbonebrown US affiliate store: www.amazon.com/shop/ragnbonebrown 🤝 HELP SUPPORT THE CHANNEL 🤝 Support with KZfaq channel membership: kzfaq.info/love/VyE_6jEtVZGmYGXtUOL5FQjoin Support with Patreon: www.patreon.com/ragnbonebrown Support with PayPal paypal.me/ragnbonebrown Shop With Amazon using my affiliate link: geni.us/iWD3K 💰 SHOP 💰 Etsy: www.etsy.com/uk/shop/KeithBrownMaker teespring.com/stores/rag-n-bone-brown-merch 🎧 WORKSHOP BANTER PODCAST 🎧 kzfaq.info Also available on Spotify, Apple, Google and most other podcast platforms 🔗 LINKS: 🔗 Website: www.ragnbonebrown.com Facebook: facebook.com/ragnbonebrown Instagram: @ragnbonebrown Twitter: twitter.com/ragnbonebrown Email: ragnbonebrown@gmail.com Second KZfaq Channel (non woodwork videos): kzfaq.info
@tonyworkswood2 жыл бұрын
The gates look very nice in the finished photo Keith, great use of the reclaimed decking. The diagonal braces let into the wood look impressive as well as being stronger. Tony
@RagnBoneBrown2 жыл бұрын
Cheers Tony
@moragmontgomery2 жыл бұрын
Thanks
@RagnBoneBrown7 ай бұрын
Thank you so much!
@pangrac12 жыл бұрын
Good points and explaining. 👍
@sumosprojects2 жыл бұрын
Onya Keefy 🎉
@rfriday95322 жыл бұрын
Delighted the yellow shorts got a run out. Not seen them for a while
@stevebettany87782 жыл бұрын
Keep on making.
@theswime9452 жыл бұрын
Nice one, thanks for sharing the nifty design cutting the braces into the centre rail. Much as I'm enjoying my foray into woodwork, I'm not yet very good at conceptualising joinery, so I find explanations like that really helpful... On another note, I see the battery in your drill lat 12'07" looks suspiciously similar to the dimensions of Parkside's 12V, so I wonder... On another another note, shelled out £140 inc. VAT & delivery for 20 decking boards 140 x 28 x 2400 mm from Wickes (I know, I know) last week. Cheers.
@michaelwillson68472 жыл бұрын
Great video again kieth. Been after some gate inspiration as it were for wee while. They look good. Can't wait see the fit and the other upcoming projects 👍🏴
@Professional_Youtube_Commenter Жыл бұрын
i made a huge misrake with "expansion gap" on the claddingf on my shed. it never expanded it shrunk.
@frankslittleworkshop2 жыл бұрын
😁 Thanks Keith. Another great video. I've just received a massive haul of deck boards for a couple of projects so this was a well timed video 😁. Thanks again... wait a minute... where is Mickey ??? 🤣🤣
@joroyle81082 жыл бұрын
Lovely old job 👍
@TheWardagh2 жыл бұрын
Great job. Love this type of video 👍🏼
@veronica58962 жыл бұрын
Thanks for sharing!
@moelmakrani71162 жыл бұрын
Well done man 👏
@MCsCreations2 жыл бұрын
Pretty nice work, Keith! The gates look fantastic! 😃 Stay safe there with your family! 🖖😊
@RagnBoneBrown2 жыл бұрын
Thank you
@simonlunt3532 жыл бұрын
Great little video mr and too see you use reclaimed timbers a lot of work stripping down but l think it’s worth it good too see you use the router l love my Milwaukee m18 router but I must admit I have not used the spiral bits l must look into them take care 👍👏👏
@RagnBoneBrown2 жыл бұрын
Thank you
@kevin-the-carrot2 жыл бұрын
Great video.I really like how you are able to build something new out of recycling old timber.The gates are looking really good and the way you think things thru like the bracing of the larger gates as the timber was not long enough is excellent.Look forward to episode 2.Thanks for the link to the wood preserver i deffo need some.As for favours to the wife i think you should clean the oven and do the washing up for a week.lol 👍
@RagnBoneBrown2 жыл бұрын
Thank you! Not sure about oven cleaning though 😃
@PhillWyattProjects2 жыл бұрын
Excellent video Keith 👍🏼
@RagnBoneBrown2 жыл бұрын
Thank you
@BischBaschBosch2 жыл бұрын
Nice bit of repurposing again there mate. Good to see you trying to get on with the router. Keep at it. 😉👌
@RagnBoneBrown2 жыл бұрын
Thank you mate!
@benjaqsonworkshop99742 жыл бұрын
Great video Keith and lots of useful info on the design. Always good to see wood being reclaimed and reused. The links are really useful - too shame there wasn't a link to those shorts.
@bluecurlygirl2 жыл бұрын
Ok. So I'm gonna have to go back and watch this again. Really nice build. Love the use of the decking boards. Which has inspired something else for me.. I cannot find anyone local to make gates. Live in a council house and there were no gates on the driveway. I looked for years and couldn't find anyone. I don't have the money to get someone to do it now but I'd still like some. Ours would be way smaller than the ones you made. Just for a driveway. Yeah definitely churning ideas with those decking boards now. Defo have to go watch again and pay proper attention. Thank you so much. Have you ever made a screen door? That's a project I want to tackle soon. Really soon with this great weather and two kittens who are only getting vaccinated next week! I'm melting!
@RagnBoneBrown2 жыл бұрын
Thanks very much. No I've not made a screen door yet
@cliffcarlo1802 жыл бұрын
Hi Keith Just out of curiosity, I was wondering which wood filler you used to fill the holes. Also, if you had to cut the old gates in half to get them to your workshop, how are you going to get them back to your auntie. Great little project and the gates turned out really good.👍
@milkod20012 жыл бұрын
He will cut them in half when finished 😜 😉
@RagnBoneBrown2 жыл бұрын
Great questions. The filler was just a test mixed one, it said exterior and interior on the tub but realistically I'm not sure how well it will hold up, it'll be interesting to find out. It's somewhat protected by the stain so maybe it'll do ok. Luckily my auntie's neighbour was able to pick up the gates, which saved a lot of hassle, couldn't have got them on my roof rack, so hiring a van was going to be the plan but now sorted
@cliffcarlo1802 жыл бұрын
@@RagnBoneBrown Thank you for your reply. Glad you got the gates sorted👍
@erictheviking6722 жыл бұрын
Really good, I've used decking timber on some fencing, doesn't look too bad and much cheaper.
@c.a.g.19772 жыл бұрын
Nice project, Keith! I made a small shed once using tongue and groove boards, didn't line up as neatly as your boards, haha!
@RagnBoneBrown2 жыл бұрын
Thank you
@NomadMakes2 жыл бұрын
Pinapple shorts! :D But no, I actually have a serious question/discussion point. Perhaps an idea for the podcast. When you say that using salvaged materials made for a substantial saving, I guess you haven´t factored in your time spent salvaging/preparing the materials. If you were to "pay yourself" a decent hourly rate for it. Would it still be a substantial saving? I find that kind of hard to belive, even with timber prices as they are now. Of course some types of material are easier to salvage than others. And don´t get me wrong, I all for the environmental aspect for using salvaged materials. Cheers and thanks for a great video.
@RagnBoneBrown2 жыл бұрын
That would make for a great topic! I will have a think about it and try and figure it out. Thank you!
@samsboringchannel2 жыл бұрын
Another great video mate, ive been dreaming up some small gates for part of my garden, and this video has definitely come in handy. Will have to rewatch it closer to our summer here though haha! Cheers
@RagnBoneBrown2 жыл бұрын
Thanks mate
@sebastiantreloar60452 жыл бұрын
Depending on nothing getting in the way if you drop the broad at 2:00 flush to the workbench your have loads more reference surface and you can run your router fence against your vice jaws.
@RagnBoneBrown2 жыл бұрын
Great idea
@Garywxm12 жыл бұрын
Someone been watching Gid 🤣
@Sly_Wolf_12 жыл бұрын
Good job thanks for sharing....... Now the devil in me was waiting for you to say "after finishing the gates I had to cut them in half to deliver them back to my auntie" 😂😂 Oh by the way, thank you Keith for recommending Ben's channel Hew and Awe.
@RagnBoneBrown2 жыл бұрын
Haha!!! Thank you
@paulfarman2939 Жыл бұрын
Love you video....wondered what camera and editing software you use. Thanks
@RagnBoneBrown Жыл бұрын
Thanks. See here for info kzfaq.info/get/bejne/mbV4fcR0x9O0Y4U.html
@Pete.Ty12 жыл бұрын
👍👍👍
@Viken43 Жыл бұрын
Would half lap joints work with gates that are not so large... Say around 2M opening. Or even dowels?
@RagnBoneBrown Жыл бұрын
kzfaq.info/get/bejne/o76CjK93r8vdZ40.html I used them here..
@PeterOConnl2 жыл бұрын
I'm building gates next week, 2 driveway and 1 side gate, can't say im looking forward to it. But will be half lap joints, are the other gates you made holding up okay?
@RagnBoneBrown2 жыл бұрын
Yeah half lap gates holding up just fine 👍
@rusty6332 жыл бұрын
Routers cannot use them for love nor money
@df91772 жыл бұрын
Routing the m&t? Should have got your domino out, would have been much quicker and easier.
@RagnBoneBrown2 жыл бұрын
Not enough depth of cut for gates this big, hence using the router
@mikedeman53512 жыл бұрын
Nice project so far. Looking forward to seeing how you go about hanging these gates. I've hung two large gates on two occasions and I have a 'trick' of my own for doing it :) Mind you, it was just two gates, not three . . . . . . . :)
@RagnBoneBrown2 жыл бұрын
Cheers
@SosiskaTheHorrible3 ай бұрын
Noooo! Not the wood preservative!!! Don’t do it Keith!!!!! Nooooooooooooooooo……….
@RagnBoneBrown3 ай бұрын
🤣 more money down the drain
@sarl21212 жыл бұрын
Who read it as "Bill Gates" and sighed?
@byronservies40432 жыл бұрын
I thought you bought a Domino? Did you decide to sell it?
@RagnBoneBrown2 жыл бұрын
Not enough depth of cut for this size of gates unfortunately, unless you have the big domino