You don’t wear gloves, but a chemical mask😂😂😂😂😂

I like the simplicity and organic look of these.

Great job! I just love the way you work with no plans, just see how things go with the tools and materials that you have. It's my preferred way of working too.

Nice. I particularly like the interesting planters.

Good work matt I love how these look. Especially the planters

They are so lovely . Succulent plants are my favorite and i really liked the idea that the pots are from firewood and who doesnt love tea light holders and the board can be used for more than one purpose !!!! Great job !!!!!

I couldn't pick one over the other... all three very nice, warm and with their very own character! Great job!

I will try some of these. Thanks for the ideas!

Got to love the scrap bin for such a project as making unique gifts. 👌🏽 They all look great, nice work, mate. 👍🏽

Simple but VERY effective matt , job well done.

Nice work fella. Good to see off cuts and leftover bits of wood being used too 👍

Interesting way to make the planters! Thanks for sharing 🍻

Ah ha!! Now I know what to do with those oak flooring cut-offs. Cheers Matt.. Excellent as always. 👌🏻

I love all 3 ideas. Now I need to find some nice oak :) Especially liked the geometric flower pots

You're a natural mate - at all of it - the creativity, the carpentry, the production, the presentation....all of it. Nice one fella!

Really like how all three of those turned out.

Thanks Matt. Actually challenged me to do something very similar as this is going to be very much a budget Christmas. Cheers!

And I really like all your tools and machines 👌🏼 one day I’ll have some of them 😊

Really nice job mate. Well done 👍🏼

Nice gift ideas; I'm sure they will be very well received. Think I'll be heading to the off-cut bin at the weekend to give them a try for myself. Thanks for sharing. Best wishes.

Great job as always 👍

Really like those geometric plant holders!!! 😍

Nice work Matt!

Dang it! Wish I would have found this earlier. Good ideas all around. Nice K.I.S.S. principling it. Keeper video!

Love them all! Merry Christmas 🎄

Very nice and easy gifts. Thanks!👍

Nice jobs, hope they like them, which I'm sure they will Matt !!!.

thanks for sharing

A good selection of little projects, Damn I have no excuse now!

very nice ideas, nice video, and nice results. Thanks for this!

May i suggest that you take the central point to the bench grinder, and make it in to a brad point

Lovely little projects/gifts. The brass candle inserts - brilliant idea - but all I can find is a 38mm Forstner bit. When I tried to make the holes in a slice of tree trunk [thought the bark 'live edge' would be cool] the pillar drill kept sticking, so I'll be using cut timber in future, maybe in a 'species sandwich'. I like the random geometric planters, and I think they could also look good done, Shou sugi ban style too. Did the 'spill' of black epoxy proove a little tough to remove - think i'd have shoved it through my thicknesser. But its true, a bit of Danish oil and bob's your auntie!

Lovely ideas. I have always wanted to try my hand at woodworking but never took the plunge. Perhaps 2020 will be the year. Thanks for sharing!

I took the centre point out of the dewalt forstner bit and replaced it with a snapped off cheap hss bit. Acts nicely to centre and pilot but removes the original grabbing action

Very nice ideas for Christmas gifts. Thanks for sharing. I recently started to make to things out of firewood. In the mean time I found out that my bandsaw isn't the best buy which I ever made. It's too small (I can go only up to a height of only 8 cm), not very powerful, the elevating mechanism clogs up very easy (and it's difficult to clean it, takes a long time) and the worst part of all is that I'm constantly breaking my saw bands. That's probably my mistake but I don't know how to avoid it.

Very cool gilts

Hello Matt , I really enjoy watching your projects being made . Especially the recycled or waste wood items. But please Can you put the crown guard on the circular Better safe than sorry. Regards. Adrian

Thanks Matt

Nice

It would have been nice to match the grain on the plug for the succulents block. I know on the bottom you wouldn't see it very often but still. Good job!

video mentiond a link in the comments for the inserts for the tea lights - 3m 50s. but cant see a link. Could you post it thank you!

Love that restored table saw. Glad your using it. I’m doing a restoration of a an Craftsman’s saw now.

Nice 💪

One of each for me please - one month to go!! x

Hi Matt, need your advice please. I need to invest in a bench top drill press and ideally a band saw, what would you recommend without breaking the bank but one that won’t break after a couple of weeks - thanks 👍

After that first one I was worried there wasn't going to be any brass!

How do you power your Chamfer Bit under the table? Do you use a normal Power Drill upside down or is it a special table? Thank you.

Food for thought, nice idea's and as others have said good time to raid the scrap box 👍👍

By the way, @ 1:52 you can use a vacuum to suck the glue into the tighter spots.

Where do you buy these insets (inlays? -- don't know how to name it) for the lights? thank you

Hi Matt what tube bending tool is that mate & where did u acquire it..🤔😁Ta

Ah Matt....you shouldn't have!! I look forward to u wrapping them at Xmas 😁

Cool projects but why is the shop so dark.

Why not a big Forster bit? Save a load of work ...

Do you have the link for the brass tealight inserts

Great ideas Matt. Where do you get your brass rod from?

What bandsaw is that bud?

Con esas luces, el taller parece casa de maracas 😂

😃👍🏻👊🏻

You’re sure you have my correct address to send them to? 👍👍👍

Lovely. I'm totally copying your ideas......two years later. :) Thanks, mate !

I have noticed that with a lot of your videos the volume seems to be quite low in comparison to other videos. Hope you don't mind the feedback

Hi Mark great job I hope these are not for your family at least if they watch KZfaq anyway It Kinda spoils the surprise 😯

en.wikipedia.org/wiki/Charcuterie

You only put three candles in. 😆