Can we get this Fluke 87 DMM back working?

Рет қаралды 21,734

2 жыл бұрын

In this video let's see if we can get this Fluke 87 DMM back working. It is not powering on and instead we can hear it making a Low clicking sound from the buzzer with no display at all. This is the second Fluke DMM in a row that was a really easy fix and I hope you find it interesting. Many times the 87 series will have zebra strip (elastomeric edge) issues or even a LCD issue. Sometimes they also have a bad or loose wafer switch or broken solder joints on the jacks. I thought I would go ahead and share some of these easier fixes in case it helps someone else. Thanks for watching!
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Weller 200W Iron if needed: amzn.to/30nzhT2
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Similar to Drok DC-DC Converter if needed: amzn.to/3eUJZYk
Jewelers Screwdriver set if needed: amzn.to/3THDqwd
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
150W Load Tester if needed: amzn.to/30i8sn8
Board Holder if needed: amzn.to/3881akA
Northridge Fix Affiliate Links. Any purchase you make with below links helps support the channel. Thanks for your support!
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amt...
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low...
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/pre...
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dua...
NF Mechanic Tweezers if needed:
northridgefix.com/product/mec...
Solder wire 100g 60/40 if needed:
northridgefix.com/product/bes...
NF.Mini Soldering Pen if needed:
northridgefix.com/product/por...
NF V2.3 Microscope if needed:
northridgefix.com/product/mic...
NF Universal Board Holder if needed:
northridgefix.com/product/uni...
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hep...
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/att...
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/gri...

Пікірлер: 40

@ElectromagneticVideos Жыл бұрын

I had never heard of Rheo Lube - looks like its perfect for switches like that. Its always great watching someone else fix for built stuff because you always learn something!

@georgedavall9449 6 күн бұрын

Thrifty Tool Shed on another level

@ThriftyToolShed 5 күн бұрын

Thanks for your kind comment!

@ThriftyToolShed 5 күн бұрын

Thanks so much for your kind comment!

@jonathanridder 2 жыл бұрын

Great video. I use that exact model as my main DMM. Luckily no problems with it for the last ~20 years.

@AlbertMartinez11 Жыл бұрын

Excellent and to the point troubleshooting, diagnosing and repairing.

@LilasTools 2 жыл бұрын

Great work as always, so many times electronics just need a little cleaning and good to go! 👍

@Tonyplat98 Жыл бұрын

Love these Fluke 87 meters they last very long time if you treat it right. I too have the 87 version 3 like yours it's a fantastic meter.

@offgridwanabe 2 жыл бұрын

You make troubleshooting look easy.

@ThriftyToolShed 2 жыл бұрын

Thank you for your kind comment! I really enjoy working on tools and items!

@MrMexanik066 6 ай бұрын

@@ThriftyToolShedhi man I have fluke with issue no high voltage measuring AC/DC .can you share circuit board diagram ?

@ThriftyToolShed 6 ай бұрын

@@MrMexanik066 If it is a fluke 87 you are in luck since Fluke shared the service manual with us. Some of the newer meters they don't. Here is a link to fluke for 87 for example. www.fluke.com/en-us/search/fluke/?query=Fluke%2087%20manual

@mtkoslowski 2 жыл бұрын

Good job. I have a Fluke 87. If it ever farts in church like that one, I’ll now know what to do.

@walakotv7451 Жыл бұрын

Thanks for this vid.Sir 💪

@juancarlosguevaramunoz2813 3 ай бұрын

Saludos desde Venezuela 🇻🇪, video genial

@georgedavall9449 6 күн бұрын

Excellent!

@electroddxful 2 жыл бұрын

Great repair🙏👍🙏👍

@mambrake 2 ай бұрын

I have the Version 4 and shows 75kohm always and the voltage is below by 5 volts. I noticed two of the K575 Varistors burnt.

@4693howe 2 жыл бұрын

We had some one use our fluke 726 process calibrator (30V limit) to try to read Hz on a VFD running on 240V. Needless to say it didn’t turn on any more. Started heating up until we removed the batteries. It was under warranty thankfully, or I would have at least tried to open it up and see what all had fried. They ended up having to send us a brand new one as the old one was so damaged.

@ThriftyToolShed 2 жыл бұрын

It was really good it was under warranty for sure! Thanks for sharing. Hope you are doing well Chris!

@franciscomendoza6192 Жыл бұрын

Donde compro el display para mi fluke 87 true rms

@E85_STI 2 жыл бұрын

My fluke has no sound or backlight but the board has some corrosion so maybe I can find the parts online because I cleaned them up and no dice.

@ratah405 Жыл бұрын

Hello, I need a 187FLUKE-187 True rms Multimeter chart, thank you very much, or where can I find it shematic

@peterharizon8390 Жыл бұрын

I had fluke87v accedintally damage when i change same value of these two fuse its work not accurately reading in all range on setting

@ELECTROxigeno76. Жыл бұрын

Exelent vídeo,..

@daviddevillers6790 2 жыл бұрын

Probably 25-30 years old? A quick lube job and it is ready for more. Well done!

@osamagamal-hf9ri Жыл бұрын

to : thrifty tool shed can you make a video about making fluke 87 multimeter .

2 ай бұрын

I have a fluke 83 that everything works on it works but the capacitor tester option. It just does not read anything when checking a capacitor. Any idea what would be wrong with it? Thanks John

@ThriftyToolShed 2 ай бұрын

The first thought in my mind would possibly be the range switch not making good contact and causing that. I should also mention that the early flukes like the original 85 and 87 models did not have a very high capacitance range at all. The 83 maybe similar. I have been told many times over the years that a older Fluke DMM was bad and not reading capacitors and it ended being that the cap was too large a value to even show any reading just OL. The older Fluke Cap range was almost useless for many of us. The newer DMMs are much better starting with the 87III if I remember right and the 87V is even better.

@jdmccorful 2 жыл бұрын

What brought you to consider the problem was contacts being dirty?

@ThriftyToolShed 2 жыл бұрын

I have seen the contacts cause issue before even though not acting exactly like this one. Also, once I took the cover off and turned the switch around a couple times it started working on uA mode and it wasn't before. I also had the issue with the last fluke I worked on with the Microcontroller chip or ASIC chip was the issue as far as cleaning it well got the meter back working. That's why I went ahead and cleaned them both and the jacks while I was spraying. Thanks for your comment!

@autolancegega599 11 ай бұрын

Anyone knows where I can get the lcd screen for this meter. My meter screen got blotched ( black patch ) , need a replacement .

@ThriftyToolShed 11 ай бұрын

I do not see a 87 LCD for sale these days. You can find the 87V still available. Not sure how backward compatible they are though! www.ebay.com/itm/266136252993?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=-vb0EET_SWy&sssrc=4429486&ssuid=D_qZMHXJQNK&var=&widget_ver=artemis&media=COPY

@ThriftyToolShed 11 ай бұрын

I see this one now also... www.ebay.com/itm/325246531976?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=md8J9gHORN2&sssrc=4429486&ssuid=D_qZMHXJQNK&var=&widget_ver=artemis&media=COPY

@piccadillypainting2826 2 жыл бұрын

Yep sometimes it's just a fluke! 😉

@Swenser 3 ай бұрын

The plastics fluke used was so bad. Two of.my flukes are hanging together with 50 tubes of super glue.

@ThriftyToolShed 3 ай бұрын

🤯

@mp1454 2 жыл бұрын

😀👏♥️👍👍👍👍👍

@northyland1157 2 ай бұрын

Flukes have lifetime warranties.

@ThriftyToolShed Ай бұрын

IF the failure is from the manufacturer's defect. IF model is still in production (not your lifetime, the meters availability). IF you are the original owner. Fluke has been known to honor some of repairs in the past in spite of this though for sure! That's good of them. The original 87 I would not expect them to. I see the meters come back unrepairable and end of product life and an estimate for the newer replacement model. Fluke also does not have a lifetime warranty on all meters.