Thule Velocompact 926 Unboxing and first installation on Hyundai Tucson.

Рет қаралды 155,746

4 жыл бұрын

3 Bike Carrier Towbar Thule VeloCompact 926 13 Pin Review and Unboxing on Hyundai Tucson.
How to install Thule bike rack on the towbar of your car? This video will show you step by step how to do it.
To increase the load capacity to four bikes by adding a 4th bike adaptor Thule 926-1 I will show soon it in next video.

Пікірлер: 49

@shepherd_flock 3 жыл бұрын

Thanks for this video. It reminded me how to install the bike rack .. The trick was that +/- screw to get the handle down. I forgot about that. 🤩

@gilmarques2362 3 жыл бұрын

The pet we needed you just passed man...

@christinadavis3863 Жыл бұрын

*I was expecting a lot of shortcuts to be taken at this price. I was wrong. Decent quality **Latest.Bike** raker . Easy on easy off.*

@Threadneedle1969 Жыл бұрын

Gutes Video, sehr instruktiv.

@jp-yw4gz 4 ай бұрын

Merci pour la vidéo

@johnnyw480 2 жыл бұрын

Very useful video! Thank You! I would also like to see turning lights to be precise their colour red or orange

@bladyatl5071 2 жыл бұрын

Turning lights are orange.

@michaelleitz4832 4 жыл бұрын

When will be your second video online?

@FOTORAFIKPL 3 жыл бұрын

Dzięki za świetny film. Czy platforma Thule Velocompact 926 mieści się w bagażniku Twojego Tucsona, położona płasko, czy trzeba trochę kombinować?

@bladyatl5071 3 жыл бұрын

This Thule Velocompact 926 fit perfectly flat in the trunk even with adapter for additional 4th bike ( Model: VeloCompact 4th Bike Adapter 9261 )

@airforce3544 3 жыл бұрын

👍👍👍

@evinmartin 4 жыл бұрын

Hi Thanks for video. I would like to buy same bikes holder and I have same car as it is on video (Hyundai Tsucon). Yesterday I went to on of the authorized shop here in my town to check how its fits on my car. We found out that this U back part, better say top of this part of holder is really close to back door And we didn't have installed tis small holders which holds bikes. On the end of the video you are shaking holder. My question is if the holder is not hitting back door. Because we experienced it during our installation test. Thanks for answer.

@bladyatl5071 3 жыл бұрын

The holder is not hitting back door even I try very hard shaking. When driving, it does not shake as shown in the video.

@yujinseo3237 Жыл бұрын

Hi, Do you think it’s compatible with 16inches kids bike? Thanks in advance!

@bladyatl5071 Жыл бұрын

I think that 16 inches bike will fit.

@kamilchmielewski9251 Жыл бұрын

I noticed that between 3:24 and 3:26 there is a gap, which is crucial for me :) How were you able to intall the bike rack finally? I am experiencing exactly the same issue, as I am not able to close the resistance knob. As far as I noticed initially you also were not able to close this knob but finally you managed. My question is how? :)

@bladyatl5071 Жыл бұрын

I had to put the camera aside because I had a problem with it too, that's why there is a gap in the film. You have to use a lot of force there to close it, but before I did it, I set the extreme positions of the knob that you can see in 2:54 . Besides, I moved the whole thing up and down to set right position to close it. This little knob under the handle regulates the closing force.

@konradjezierski3683 Жыл бұрын

Hej, czy udało ci się zamknąć ?) Mam ten sam problem

@mirkobevilacqua9841 3 ай бұрын

@@bladyatl5071ciao! Ma alla fine la rotella come l'hai regolata? Il mio gancio ha un diametro di circa 3-4 cm sotto la testa. Grazie

@bljr2013 2 жыл бұрын

What size ball hitch mount?

@bladyatl5071 Жыл бұрын

50mm

@andream.464 2 жыл бұрын

The bikes shouldn’t wobble! Tighten them at the wheels!

@donnaboniface880 3 жыл бұрын

Can someone tell me what size lowball is needed for this rack?

@ilona4500 3 жыл бұрын

Lowball size is 50mm

@donnaboniface880 3 жыл бұрын

@@ilona4500 Thank you very much

@TomaszMarcinkowski Жыл бұрын

Do you have any issues with the U-shaped lever slanting away from the car when driving as fast as 100 kmph? (doesn't happen with lower speeds) It doesn't matter how strong you tighten the knobs. Seems like a common problem among users.

@bladyatl5071 Жыл бұрын

I do not notice any slanting U-shaped lever while driving. I will be paying attention from now on and will do an update on this post soon.

@jasieniek983 Жыл бұрын

Unfortunatelly I have the same problem. Did you find a solution?

@jasieniek983 Жыл бұрын

Cześć, czy znalazłeś rozwiązanie? Niestety mam ten sam problem, rama składa mi się podczas jazdy a rowery się odchylają od samochodu. Musiałem już się kilka razy zatrzymy żeby je poprawić. Byłbym wdzięczny za odpowiedź:)

@TomaszMarcinkowski Жыл бұрын

@@jasieniek983 nope, I haven't. I'm thinking about mounting the lever the other way around - contrary to what the manual says.

@jasieniek983 Жыл бұрын

@@TomaszMarcinkowski , I've also considered mounting it the other way round. Unfortunately, because of the profile of the U- shaped frame it won't work. Moreover somehow I think it s done on purpose from Thule that is moving a bit. Otherwise it' d break by stronger powers. When I open a trailer it also moves back. I photographed it and I'm planning to send an email to Thule asking for support. Greets, Jan

@ValeTekZwa 2 жыл бұрын

Hi, what is the size of the 2 small bikes ? 20 or 24 inches ?

@bladyatl5071 2 жыл бұрын

24 inches

@ValeTekZwa 2 жыл бұрын

Thx, will they fit 20 inch bikes also?

@bladyatl5071 2 жыл бұрын

@@ValeTekZwa Yes, they fit too.

@savvasvamvakidis8412 3 жыл бұрын

I can't get the handle down. What's the trick?

@bladyatl5071 3 жыл бұрын

This same problem its show at 2:40 . Below handle bar you have knob for adjusting the force with which the bicycle rack is held on the hook. If its too tight you can't get the handle down.

@savvasvamvakidis8412 3 жыл бұрын

@@bladyatl5071 That's what i already did, but still.......

@bladyatl5071 3 жыл бұрын

@@savvasvamvakidis8412 What its your lowball size? ( should be 50mm)

@savvasvamvakidis8412 3 жыл бұрын

@@bladyatl5071 it is 50mm.

@bladyatl5071 3 жыл бұрын

@@savvasvamvakidis8412 It looks like you have broken adjustment or set in one position where this knob can't change. If this new one go to seller for support or use hammer to check if this regulation its not blocked.