TIG Aluminum Weave with HTP Invertig 221

Рет қаралды 92,668

5 жыл бұрын

TIG Aluminum Weave with HTP Invertig 221 In this video I show you all the steps and methods that I use to weave on aluminum. I have good clear arc shots so you can see exactly what Im doing. Consistency is key on these weaves. Take your time and learn them correctly.
In this video I show a root pass, regular double weave and the tri weave. Thanks for watching and let me know what else you would like to learn!
For Fabrication Inquiries, or for one on one Welding lessons email me at 5thstreetfab@gmail.com
Check out my Patreon account at / 5thstreetfab
Or visit my website at 5thstreetfab.comUse My coupon code to get 5% off of HTP Welders! (except Invertig 313) FIFTHST5%
Here's my Affiliate link for the My HTP Invertig 400! The best TIG welder I've ever used!
usaweld.com/collections/htp-a...
My HTP Invertig 221! Best machine for the home hobbiest
usaweld.com/collections/htp-a...
usaweld.com/collections/htp-a...
HTP Invertig 313!
usaweld.com/collections/htp-a...
MYe HTP Pro Pulse 220! Crazy pulsed MIG welder!
usaweld.com/products/pro_puls...
here's my affiliate link for the welding coupons!
weldmetalsonline.com/?ref=5TH...
coupon code 5THSTREETFAB at checkout for 10% off. You can use this code for any order, not just a one time use!
Here's a list of my Affiliate links! They don't cost you any extra but Amazon sends me a kick back of anyone that buys something through me. These are all tools that I personally use or have used and definitely suggest!
HTP's Welders
usaweld.com/?ref=omsa2idyypk
Evolution saw amzn.to/3fM5lYg
Bandsaw amzn.to/39qeNQ0
Optrel welding hood amzn.to/36iPYDx
Speedglas Hood amzn.to/33uFrn4
Jackson Fixed shade hood amzn.to/2HNGIxM
123 blocks amzn.to/36kI7pc
4" belt sander amzn.to/3mma5WZ
Stripping wheel amzn.to/2KapN4x
F Clamps! amzn.to/2JcdeKS
40 Grit flap discs amzn.to/39teQKK
Speed Square amzn.to/3lk7M5i
Automatic center punch amzn.to/3o2YFIf
My favorite Angle Grinder amzn.to/37flZMc
Welding pliers amzn.to/2Jinpxn
Bench Grinder amzn.to/3o7uShv

Пікірлер: 242

@5thStreetFab 5 жыл бұрын

Thanks for watching guys. I tried to explain everything the best I could. If you have any more questions just comment and I'll get back to you.

@niwachien 5 жыл бұрын

What are you hiding from?

@pontoonrob7948 5 жыл бұрын

Some pics of the results after the arc shots would be nice. New camo antifa or just cold? Lol

@5thStreetFab 5 жыл бұрын

The cold!!!

@5thStreetFab 5 жыл бұрын

I know I had the camera dialed and didn't want to move it haha soon I'll have a second camera. Antifa! Haha no just freezing my ass off! Although I am near Eugene haha

@TheRitchieLeeShow 5 жыл бұрын

Dude someone needs to send you a heater to DEMO. Try TSC.@@5thStreetFab

@luisvega1294 4 жыл бұрын

miller syncrowave 200 amp ac/dc only been tig welding few months.. your videos help tremendously thank you for sharing your skills! aluminum so far has been the funnest to weld for me I have long way to go yet before I will ever be as good as you but I sincerely thank you for helping me become a better welder with your teaching..love Jody and Tony too.. you guys are the best!

@sethstrohm7877 5 жыл бұрын

Your aluminum videos has helped get back to where I was 4 yrs ago haven’t tig welded since until 3 months ago at work an it improves a lot after watching ur videos. U r an animal on aluminum thks for the videos keep it up

@5thStreetFab 5 жыл бұрын

Right on dude! Glad I could help and thanks for watching

@danl.4743 5 жыл бұрын

You are a really good teacher. That's a tallent not too many have. Thanks. Your videos help me a lot.

@joshharroun2004 2 жыл бұрын

Man I wish I could weld like you. Your movements look so robotic. I’m jealous of the steady hands.

@israelnieves2817 5 жыл бұрын

Thanks for taking your time to teach some of your skills and style.

@5thStreetFab 5 жыл бұрын

No problem bud thanks to taking the time to watch it 👊

@garylsmalley 5 жыл бұрын

You are very clear with your explanation, easy to understand, especially with the video close up, which is also easy to see. Good job. I have stick welded ac and dc since high school. I'm now 70, and considering a multi purpose machine. I have never mig or tig welded, so I'm watching videos on both process, plus making a decision on what machine to buy. Enjoyed your video

@5thStreetFab 5 жыл бұрын

Thank you very much! If you want to TIG welding Aluminum make sure its and AC/DC multi purpose machine. Good luck! And thanks for watching

@alexadames9390 5 жыл бұрын

Great videos , thanks for sharing your welding skills and wisdom. I'm new at tig, using inverter Primeweld 225.

@southmaplegarage 5 жыл бұрын

Your videos have helped my ac tig in so many ways, thanks for taking the time to teach so many of us. Iv upgraded from an eastwood tig200 to an Everlast ext210. Next upgrade is a watercooler .

@5thStreetFab 5 жыл бұрын

Right on dude. I'm glad to hear it! How is that ext 210? I've never ran one. Yes water coolers are amazing especially on Aluminum!

@southmaplegarage 5 жыл бұрын

5th Street Fab Its great, so many settings to dial in, blows the syncrowave200 I use at work away.

@alekseygrun2315 4 жыл бұрын

Very good job! Perfect explanation of detailes! Nice pofesional Video!!!

@garypostell5268 2 жыл бұрын

Awesome job HTP Is doing a very fine job just outstanding performance 💯🇺🇸💪❤️

@timothyprochilo4840 5 жыл бұрын

Great stuff as usual. Very simple and well explained. Thanks.

@5thStreetFab 5 жыл бұрын

Thanks bud! I appreciate it 👊

@dalibortrkulja9582 4 жыл бұрын

glad u got a free welder, u deserve it

@5thStreetFab 4 жыл бұрын

Thank you! I really appreciate it and its been doing great!

@bellofello1 5 жыл бұрын

I run an everlast inverter machine. Thanks for the videos, looking forward to putting your tips to practice to improve my welds!

@5thStreetFab 5 жыл бұрын

Right on dude and thanks!

@ktcgarage8572 5 жыл бұрын

I’ve been watching your old stuff thinking you needed some camera gear but it looks like you have done that. I love watching your vids. I don’t tig so I’m limited to the mig vids for my education but you have taught me a lot. Your mig beads are goals for me!

@5thStreetFab 5 жыл бұрын

Thanks dude 🍻 ya all I had before was my phone. Haha not the best but it got me through

@ktcgarage8572 5 жыл бұрын

5th Street Fab haha yes I get it I didn’t even hold my phone sideways my first three videos. They were terrible Now I have a high def camera and mics and light. It takes a while to get going

@gonzosweldinginc2922 5 жыл бұрын

Great video keep them coming! Drawing it out makes it much more understandable.

@5thStreetFab 5 жыл бұрын

Glad to hear it

@charlesnorton5134 4 жыл бұрын

Wonderful video ,,it was like being in welding school .

@nataliejustinmurphy2671 3 жыл бұрын

Miller Sync 250 HF. Nice welds, thanks for the detailed explanation, helpful!

@liviuvasiu282 4 жыл бұрын

You're doing a great job ! Awesome ! Thank you !

@willbraswell7425 5 жыл бұрын

Your sketching with explanation really helped me!

@5thStreetFab 5 жыл бұрын

Good I wasn't sure if it would make sense to people so I'm glad to hear it!

@garypostell5268 2 жыл бұрын

Thanks keep them coming love ❤️ it!

@YakobShtern 5 жыл бұрын

Супер. Молодец парень . Настоящий сварщик , наше Братство !

@thatguythatdoesstuff7448 5 жыл бұрын

Swap the torch for a CK Flex and that's my dream setup. It's awesome HTP sent that to you. Well deserved. I'm on an Everlast inverter.

@5thStreetFab 5 жыл бұрын

Ya I had CK flex head #9 but man does it not stand up to Aluminum. I might get a #20 sometime though! I've heard good things about the Everlast tigs. Thanks bud

@dlewis4647 5 жыл бұрын

I have the exact same TIG setup. Keep the vids coming. Great content!

@5thStreetFab 5 жыл бұрын

Nice dude I love this setup!

@kalita210 Жыл бұрын

Beautiful welds

@joelwilliams3790 4 жыл бұрын

Well Done young man and thanks for ur great helpfull tips.

@5thStreetFab 4 жыл бұрын

No problem thanks for watching

@ThisOldTony 5 жыл бұрын

beautiful work. I have the same 221 but my welds don't look like that. Wonder if I got a bum one? ;)

@5thStreetFab 5 жыл бұрын

Haha that must be it Tony! 😉 Thank you

@ryanjones9305 5 жыл бұрын

This Old Tony bum is as bum does there, ToT.

@l.p.5259 5 жыл бұрын

Definitely the machine...in 20 yrs of welding and working with hundreds of weldors(men), I can’t think of one single time when something turned bad and it was their fault.... always the machine, rods, gas, helper, weather, rotational axis of the earth, etc..

@ashton6478 5 жыл бұрын

L. P. Lmfao

@anthonymontey4615 5 жыл бұрын

@RR3EURO 4 жыл бұрын

Great tips, thanks

@Ryan_1997 5 жыл бұрын

Looks good 👍 I'm using an inverter. No big name brand but have made some good welds with it. Just need to buy more consumables and tungsten. It's a lotos. Pretty good I'm happy wit it since I'm a beginner.

@5thStreetFab 5 жыл бұрын

Nice. Just make sure you buy name brand consumables it really does make a difference!

@ls2005019227 5 жыл бұрын

Great info- I use a Miller Syncrowave 210 (inverter). I agree on the annoyance of high frequency, & only get around 150 if needing a lot of focus (along a thin edge). Around 60hz is much more pleasing, & I use on thicker pieces, castings, etc.

@5thStreetFab 5 жыл бұрын

Definitely! 60 Hz is what my machine runs at work and I don't feel like shooting myself by the end of the day haha

@JSC-c 5 жыл бұрын

I'm from Australia and have the Esab 2200i tig been a great machine, would like to see these HTP machines over here in the future they look really good quality and everyone on here seems to be using them now

@5thStreetFab 5 жыл бұрын

Nice I know a lot of people like those esabs. I don't know if HTP has welders over there but in Europe they do but they're called Stel could try looking for them

@veloztec 5 жыл бұрын

beautiful work.

@CarlosReyes-ui6pe 5 жыл бұрын

TIG Master work right there.

@5thStreetFab 5 жыл бұрын

Thank you

@milsgarage 3 жыл бұрын

Great video. Thank you. Subbed. 👍

@destro513 5 жыл бұрын

I have an htp 221 and Lincoln sp185. I use a big miller tig at work

@mountainsprings3303 4 жыл бұрын

Great Tutorial...thanks.

@jeffuthoff8622 5 жыл бұрын

Very nice work, friend!!

@5thStreetFab 5 жыл бұрын

Thanks bud!

@Mikael5732 4 жыл бұрын

Just got my Invertig 221 today. Going to start setting up tomorrow. Selling my Miller econotig 150A. Just used it for stick anyway.

@5thStreetFab 4 жыл бұрын

Thats awesome! Let me know how you like it!

@davidcizek4024 5 жыл бұрын

Great Video as always…i have to try it once ! You are so steady and precise ,my hands are a little shaky 😟Thanks and have a nice day David from Austria

@5thStreetFab 5 жыл бұрын

Thanks David! Give it a shot and let me know how it goes. Thanks for visiting!

@Broski87844 4 жыл бұрын

Good shit man.

@g-mane7497 5 жыл бұрын

New sub. Thanks for the info bro

@ashleymillard3207 5 жыл бұрын

Just discovered your channel. Great content. Lots of good guidance. I really like the detail especially where you can get into trouble. Aluminum is different than other metals when tig welding. Your videos are great. I think even better than the much loved Jody or weld.com guys. You cover settings but I would like to see more. Not a video on settings but when welding describe what your settings are and why you’re using them.

@5thStreetFab 5 жыл бұрын

Thank you! I don't know if they're that good haha but I appreciate it! I try to include the settings but it's always an after thought haha I'll try to remember for you!

@ilnitrox 5 жыл бұрын

Hi, nice job my friend. It's nice weld aluminium, I try to do it better, because it's difficult. However TIG welding need more practice to be control the puddle and make good welds. You have a good channel and I like it. Regards from Spain

@5thStreetFab 5 жыл бұрын

thanks bud!

@xj98cherokee 5 жыл бұрын

Good job 👍

@JeepingMo 2 жыл бұрын

Good video

@Urchfab 5 жыл бұрын

You got some serious skills bro! Looks like a sweet Htp setup you got there, You don't see that kit over here.

@5thStreetFab 5 жыл бұрын

Thanks Matt! Ya I think they call them stel welder's over in Europe. HTP is their American version.

@armenvegas 4 жыл бұрын

Nice welds, very nice equipment, wish I had $3k. I want a ac tig machine soo bad

@setnbronco4932 5 жыл бұрын

Miller Dynasty 200DX inverter. Good vid

@5thStreetFab 5 жыл бұрын

Nice!

@scotthorn4580 5 жыл бұрын

I use the htp 221 tig to like to see some more videos since I'm learning as a hobby

@5thStreetFab 5 жыл бұрын

Awesome perfect because I'm just starting to dive into this machine

@scotthorn4580 5 жыл бұрын

U should do some videos how to use pulse in ac and dc with some basic settings

@5thStreetFab 5 жыл бұрын

Ok sounds good dude!

@Racerboy535 5 жыл бұрын

Subbed so I can beat myself up trying to match your skills.

@marcellemay7721 5 жыл бұрын

I use an everlast 250ex inverter machine. It's been a great machine but the torch that came with it sucked. I just recently installed a ck20 water cooled torch and the difference is night and day. My water cooler is a home brew that I made using a pump and a transmission cooler, the reservoir is a 1 gallon gas tank, and I use a 50/50 mix of water and antifreeze for the coolant. No fan. The tranny cooler works so well that the fluid has never risen more than 5 degrees over ambient temperature and no fan noise. It's been that way for 5 yrs with no issues.

@5thStreetFab 5 жыл бұрын

right on. Ive heard good things about the 250ex's and Ive seen people use those water coolers like youre saying! thats awesome they work so long

@marcellemay7721 5 жыл бұрын

@someone else distilled water freezes, it just be mixed with something to keep it from freezing. Antifreeze has anti corrosive additives in it. It's been going strong for 5 yrs now, I think it'll be just fine. My mixture is distilled water with antifreeze.

@mainstreetmachineworks651 5 жыл бұрын

@Marcel Lemay, would love to see a video of the water cooler. Interesting setup...you still in TN? I need to come back by and see ya. You turned some Ball Screws down for me years ago. Id like to come check out the shop!

@marcellemay7721 5 жыл бұрын

@@mainstreetmachineworks651 Hey, I remember you! I'm still at the same spot.

@robertwaltersagbayyumbla7150 4 жыл бұрын

muchas grcias muy buena la esplicacion pero esta forma de soldar si esta respetando las normas legales e la soldadura muchas gracias maestro saludos desde Italia

@steakandchips9046 5 жыл бұрын

Nice work mate Wish you had of shown the finished results after each pass 👍

@5thStreetFab 5 жыл бұрын

I know! I had the camera setup nice and didn't want to move it haha. Im getting a second camera setup soon so i can show things like that and the machine amperage as Im welding

@steakandchips9046 5 жыл бұрын

@@5thStreetFab great 👍 What gas pure argon or argon helium mix ?

@5thStreetFab 5 жыл бұрын

Pure argon

@trailerpark187 5 жыл бұрын

That htp runs way better than the ahp. Never did a triple but I will be trying it soon.

@5thStreetFab 5 жыл бұрын

Dude it's night and day! So freaking nice. Now I actually want to use it at work

@FrustratedBaboon 2 жыл бұрын

Great steady hand you have. Can you edit this video to show the results? Did I miss it sorry?

@wdj935 5 жыл бұрын

Thanks for the video. I bought this machine about 7 months ago and haven't had time to use it. Please show videos with 1/8" 6061. Please show with detail how you set up with the machine as well. Thanks again

@5thStreetFab 5 жыл бұрын

Right on bud! Ya if I get my hands on some 6061 I will. It's pretty much the same but likes more heat

@wdj935 5 жыл бұрын

@@5thStreetFab I noticed from another vid that you are using the same belt sander as mine. What kind of belts are you using? and how are you using it? I tried using a nice nylon mesh belt but that belt sander refuses to move with it on. Thanks

@pajapajic8809 4 жыл бұрын

Bravo

@Goalsplus 5 жыл бұрын

Thanks very much. What I would like to see or hear is more "basic" information. My mig doesn't have a chart and I didn't pay the fact much attention. On various KZfaq videos I learnt about balancing wire feed speed and amps BUT it took me a year to figure out amps are related to material thickness. Maybe someone mentioned it but some basic information needs to be repeated over and over again to enable learning. Thanks for listening.

@5thStreetFab 5 жыл бұрын

ya that takes some time if you were never taught it before. Im planning on doing a begginer tig series but might throw in some MIG also

@Goalsplus 5 жыл бұрын

@@5thStreetFab that'll be terrific. Thanks.

@motoxjim929 5 жыл бұрын

I use both my inverter is an everlast my transformer is a hobart and the miller at work is a transformer.

@5thStreetFab 5 жыл бұрын

Nice that's close to the same setup I run!

@MrBuboyangeles 4 жыл бұрын

Is it posible to tig a crank case ex.( from a motor cycle) using tacoma imverter dc tig/arc and argon gas? A/c tig/arc machine are very expensive.

@jshpaint 3 жыл бұрын

Your videos are so helpful. Thank you so much for sharing. When I weld inside corners I can’t seem to get my arc down into the corner. It tends to bounce between the flat plains of the two pieces. Do you have a tip for that?

@5thStreetFab 3 жыл бұрын

Ya it usually will do that until you dab some filler in there to join them together. After that it should be smooth sailing! If its doing it afterwards its possible that your gas has too high of a flow rate

@jshpaint 3 жыл бұрын

5th Street Fab thank you so much!

@groushkolb 5 жыл бұрын

Dynasty 280 good video

@5thStreetFab 5 жыл бұрын

Ooh you lucky dog!

@BlacharzOstatniejSzansy 4 жыл бұрын

How do you record your welding process? It looks so clear

@5thStreetFab 4 жыл бұрын

i use a camera with an ND filter and turn the iso to 100 and f stop to 32

@MatthewScott 5 жыл бұрын

I'm running an inverter. An Eastwood Tig 200 acdc. No freq adjust. I wish. At work I use a Miller transformer based synchrowave 300. I think it's a 300. Been a while since I looked. Tig every day. Love the videos. I messaged you a while back on IG. Keep it up dude! (Laidoutsierra at IG)

@5thStreetFab 5 жыл бұрын

nice. thats kind of the set up i have. an inverter at home and syncrowave at work

@mainstreetmachineworks651 5 жыл бұрын

Everlast inverter, and just picked up a PrimeWeld Inverter Machine. Would love to see some AC pulse for an edge weld. Curious to know what settings you like to use Keep up the great content!

@5thStreetFab 5 жыл бұрын

Nice! I usually don't use pulse on AC but I do want to mess around with it

@ronaldgenendlis6423 5 жыл бұрын

I got the everlast 325 ext. water cooled. I have not done a lot of aluminum on this machine. But it’s a good machine. Nice video

@5thStreetFab 5 жыл бұрын

Wow didn't know everlast made machines that big. That's cool

@ronaldgenendlis6423 5 жыл бұрын

Yep everlast powertig 325 ext.

@Dbzlover69 4 жыл бұрын

Badass👍

@leebarnhart9725 4 жыл бұрын

You got pretty good arc shots with your camera. I'm sure it don't come out of the box ready to film a welding arc does it? Any way, good job! Good video.

@kevinklotzbier7301 5 жыл бұрын

im using a transformer, Miller 250HF, any tips and you will have my attention

@5thStreetFab 5 жыл бұрын

Awesome really good machine!

@strangerdanger1449 5 жыл бұрын

lincoln invertec v205-t ac/dc. Videos are great.How do u not have trouble with heat going so slow, is that all from foot control? I talked to u a while back about my aluminum falling away when I tried to do a butt weld and it was cause of heat saturation starting to slow.thanks

@5thStreetFab 5 жыл бұрын

Ya it takes a bit of practice id try using larger pieces to practice on or clamp it to something thick to help

@kieren7763 5 жыл бұрын

You make this look way to easy but in reality it's like rubbing your stomach and patting your head at the same time while balancing a football on your foot my tungsten would be more aluminium than tungsten if I tried that lol great work

@5thStreetFab 5 жыл бұрын

Haha it's more like driving just gotta get some practice

@scottcarr3264 5 жыл бұрын

At work I have a Tokentools 315 DX ( identical to the Everlast 315 ac/dc, except it's Red instead of Green) I don't get the "round" definition of the dabs as much, mine seem to ripple as though I have more heat in the weld zone, what am i doing wrong.

@5thStreetFab 5 жыл бұрын

Id have to see a picture otherwise im not sure.

@alexweeks4203 4 жыл бұрын

Inverter at home, Synchrowave transformer at school. I like inverters a little better though.

@jessehigley5283 5 жыл бұрын

At work I use a transformer based welder. At home I use an inverter type welder.

@dougalan5614 5 жыл бұрын

How do you get those clear arc shots? Fantastic.

@5thStreetFab 5 жыл бұрын

I used a low ISO a high f stop and lense filter

@lateatday9826 4 жыл бұрын

Is use a invertig 221 so inverter

@shitbox7413 5 жыл бұрын

I have a 200 amp transformer welder that shall remain nameless, it’s amazing for steel, but it’s not great on AC. 😕

@2WildRazn 4 жыл бұрын

I use a Everlast 250 and I can’t run my balance at 75% it heat the tungsten up red hot all the way to the gas lens

@MonkeyFabGarage 5 жыл бұрын

Very well explained. I always learn a ton from your videos. What’s up with the terrorist look tho? “This is 5th street, we’ve taken your tungsten hostage. Send money or else” 😂

@5thStreetFab 5 жыл бұрын

thanks bud! haha ya I just dubbed over an old al queda video with my voice haha

@MonkeyFabGarage 5 жыл бұрын

That would actually be hilarious

@MuhammadAkhtar-ck9lz 4 жыл бұрын

Bro .I want to training welding tig welding .ss where are u training center plz reply???

@johnnymissfire8464 5 жыл бұрын

Everlast inverter, still trying to figure out how to get a consistent bead on ac.

@5thStreetFab 5 жыл бұрын

Nice. I think a good way is to scribe lines as thick as you want the bead and then adjusting as you weld to stay in that zone

@johnnymissfire8464 5 жыл бұрын

@@5thStreetFab thanks i will give tht a try.

@mojomarine230 5 жыл бұрын

Rad looking work and thanks for the tips. Do you run your machine on 120 or 240V?

@5thStreetFab 5 жыл бұрын

Thank you I'm running on 220

@mojomarine230 5 жыл бұрын

Thanks@@5thStreetFab

@doitallgaragetx 5 жыл бұрын

Are you using a different lens or filter when you shoot the actual welding footage? When I use my camera, the light is way too bright and you can't see my welds. All you can see is a bright light. Those welds look awesome by the way.....Thanks.

@bellofello1 5 жыл бұрын

Does your helmet have an adjustable lens? Sounds like you need a darker shade

@doitallgaragetx 5 жыл бұрын

@@bellofello1 my helmet is a Lincoln adjustable shade auto darkening. It goes to 11 or 12.

@5thStreetFab 5 жыл бұрын

Ya I'm using an adjustable Nd filter over my camera with the iso all the way down and the f stop at 32 I think

@garypostell5268 2 жыл бұрын

That’s a two dap or three dap weave ?

@Rollie396 5 жыл бұрын

Had a Miller 180 sd for years. Bought an everlast 200dv 3 years ago to try out an inverter. I won’t go back to a transformer machine.

@5thStreetFab 5 жыл бұрын

Ya I know what you mean I've been trying to talk my work into inverters for a long time

@dirtyford633 5 жыл бұрын

I'm thinking heat in that garage should be the next project. :)

@ashton6478 5 жыл бұрын

Who needs heat when you can just weld

@sgt-willkillu 5 жыл бұрын

Do u prefer to mig or tig weld?

@5thStreetFab 5 жыл бұрын

I like TIG the most

@milesmoore5422 3 жыл бұрын

Amp Setting ? " Constantly letting off the pedal as you go " ? ?

@icn3d 5 жыл бұрын

AHP 200X tig inverter just like yours.

@5thStreetFab 5 жыл бұрын

Right on bud!

@icn3d 5 жыл бұрын

@@5thStreetFab I had the AHP long before I found your channel but thank you so much for the review on the Evo 380 metal cutting chop saw. I got one and love it.

@5thStreetFab 5 жыл бұрын

Ya man that saw is just awesome! Well worth the money.

@thedookster2 5 жыл бұрын

Same here. I use the AHP 200X. When I decided to return my Harbor Freight machine, your aluminum welding videos sold me on the AHP!

@leeackerson2579 5 жыл бұрын

Eastwood inverter. I can see your next big purchase is going to be a workshop heater.

@5thStreetFab 5 жыл бұрын

Haha ya it should be!

@abenesh1 4 жыл бұрын

how to start im a beginner to welding

@cowboybrad6288 5 жыл бұрын

Kool

@4speed3pedals 5 жыл бұрын

Old P&H Transformer, 60Hz only. Thanks.

@5thStreetFab 5 жыл бұрын

Cool! That's what I mostly use! What kind?

@4speed3pedals 5 жыл бұрын

It is a P&H AC/DC welder with a water pump for cooling the TIG torch. Most people used to call them Heli-arc welders. Mine looks like the one here: www.tristatemachinerydismantlers.com/WISCONSIN/Motors-and-tools/New/Heliarc-welder-p-h-300-amps-output-the-beast.jsp

@thomasandkimcowieson8340 5 жыл бұрын

Lincoln Electric Precision Tig 275 transformer

@JesseWright68 5 жыл бұрын

Lincoln Square Wave TIG 355 for me.

@5thStreetFab 5 жыл бұрын

Sweet machine dude

@JesseWright68 5 жыл бұрын

@@5thStreetFab Thanks. It's a big one. 410 amps. I'd like to see more videos on what can be done with older machines like mine with no frequency adjustment.

@5thStreetFab 5 жыл бұрын

I'm planning on setting mine up so it acts just like my transformer at work so I can show those techniques

@w46try7 5 жыл бұрын

Amazing welds as usual. Looked like you just keep your foot pedal fairly steady, rather than manipulate the pedal as you dip filler rod. Also, I noticed that you sorta tap down onto the pool with your filler rod , rather than jab into the front of the pool. I need to change my technique I guess.

@5thStreetFab 5 жыл бұрын

Thanks I like a consistent foot pedal unless it's thick material that's not preheated. That seems to weld better with pedal pumping.