Ya. Love the er boom. Yes this crew chips the smaller trees and tree tops.

Most of the time they are there. I'm cutting for 5 different crews so it's hard to do a job without them being there now.

Landowner wanted to leave those spots.

Tigercat 8-9 and timberpro 10.5 to 11.5 gallons per hour.

Thank u. Appreciate some real world info.

Don't worry it's only 6 acres. I only had 7 hours in this small job. I'm in a 108 acre job now. Big timber and steep. Alot of messing around with topping and shoveling trees.

@@patreekiller Shew man.... that's me everyday... that's why I went with a 37 inch dangle and not a hotsaw.... be safe!!

@@timberslasher4899 I had a barsaws. Works ok but I can cut a bigger tree with my hotsaw and less down time and cheaper to run. Bars and chains suck. I get more done with the hotsaw.

@@patreekiller I know you can beat me in average terrain and average trees. But when the average tree is 33 inches plus and the ground is super steep 50%+ I can out cut a hot saw all day and out shovel. I cut with a 765 Timberpro with a big hotsaw, not sure of the inches on a job recently, he said it was the biggest Quadco, and on the big trees on steep ground I can cut them and shovel them without turning a track. I embarrassed him on steep ground cutting and shoveling with my 350k machine vs. his 700k machine. He was struggling to track up and down to hit them from multiple sides while I was feeding the cable skidders cause the grapples could do nothing there. If you dig in to my videos I prove that I can smoke the hot saws in rough conditions with big timber. If one machine was the best at everything they would only make one machine. You most surely have an all around superior machine to mine but in the mountains of Appalachia at 3000 feet and above the dangles are king. Everyone has worked the flats but people who haven't worked where I have for 30 years don't know what they are talking about. And I can work several days without grinding a chain in those conditions and I can buy ten chains for what a set of teeth cost and I can get a year plus out of a bar. Those fixed bar and chain heads like Timbco and Timberpro use are pure junk next to a dangle. And to go with all that I can cut 4 days or a little more and cut 20 loads a day on 116 gallons.....

@@timberslasher4899 in nice open ground with the extra reach and a lighter head it would do good. An 855 with there dangle head would be nice. I would go threw 2 to 10 chains a day because of hitting rocks. I couldn't get a bar to last thar long. My bars wore out fast. Unless I would mess with cutting the Grove deeper where the chain rides. I would love to get a lowen 30 inch cut hotsaw head. Then I could push 32 or alittle more off the stump but I'm good with what I got. I can get about 30 inches off the stump with 1 cut with my 26 inch head. Soft wood it easily does it. I cut to much junk not to have a hotsaw. I get about 300 to 500 loads on a set of teeth. I just had to many years with a barsaw head and it's kinda annoying to run one now.

I sold the timberpro and bought this machine after getting my lx830c running.

Maybe someday. This only takes a second to setup.