If your bathroom faucet looks like this one and the turn on/off lever is coming loose, then this just might help. I believe this is a Moen Brantford as visualized at www.moen.com/s....
Пікірлер: 501
@hamiltonfish8105 ай бұрын
Ten years later, you are still helping people to repair this valve. Thank you, March 9, 2024
@LesterMartinATL5 ай бұрын
surely never expected that!!
@spudsmck15 ай бұрын
I was totally stumped until watching this video. The Moen system is very different than others I had used in the past. Thank you for making me a brain surgeon!
@DeeznutztheOG11 ай бұрын
Bro needs the medal of honor for this, this is my exact sink and I haven't seen anyone show this either, thank you!!!
@PAKraig14 күн бұрын
Thank you! Fixed my kitchen faucet tonight and your video was suggested below. Never even thought about how easy to fix my bathroom faucet could be too!
@LesterMartinATL10 күн бұрын
It is an amazingly weird design for sure!
@markkendall33084 жыл бұрын
Your diligence in making a video of this procedure has created a nation of grateful homeowners, and especially son-in-laws under the pressure! 🙂
@gabbym72199 ай бұрын
😂
@davidaguiar13873 жыл бұрын
Wow, I've been scratching my head over this loose handle for the last year. Now it's fixed in 90 seconds. Thanks much!
@paramjitsingh-lk4wr3 жыл бұрын
Me too. Thank you
@razamahdirizvi7562 жыл бұрын
Same here 🤪 Very helpful 👌👌👌
@drummerdaveh7 жыл бұрын
OMG, I've had this problem for a DECADE & have asked pros, plummers, big box salesmen, & friends, to no avail! Thanks so much for the solution!! Bravo! TIP: my bases were too tight & couldn't be loosened from below, so I slipped a piece of rubber bicycle innertube over the base & safely applied a wrench.
@LesterMartinATL7 жыл бұрын
nice tip to allow the wrench to get a bite on it w/o doing any damage
@Crflyputt Жыл бұрын
You’re a lifesaver, dude. I’ve been looking at this for 3 years trying to figure out how to tighten the levers.
@htowndroner91753 жыл бұрын
5yrs later and your video continues to give back! Thank you so much, I have this exact problem and could not figure out how to tighten, a quick youtube search and boom, my prayers answered!
@aaron53094 жыл бұрын
Just moved into a new house and found the loose handle. Had no idea the manufacture but it looked just like that sink and your instructions were perfect! Thanks!!
@johnfishero19588 жыл бұрын
After months of figuring what tool to use inside the cap on top, I watched your video and straightened the crooked handle in a minute. Thanks so much, and my wife thanks you too!
@lisabays66633 жыл бұрын
Thank you so much! This was the exact model we have and I was at a loss for how to take it apart since there are no visible screws or caps. Got ours all tightened back up thanks to your helpful video 😊
@bighuskermav71755 жыл бұрын
You rock dude! I almost had a panic attack when I couldn't pry off the cap and thought i was gonna have to disassemble the whole faucet. You made my day!
@janicefisher62056 жыл бұрын
Thank you, this video was a lifesaver! Read instruction manual inside and out several times and it does not show how to take the loose handle off for tightening. Felt for a set screw, tried gently pulling off, and finally went to internet! Jumped up and tried your fix while you were still talking and it worked. Now I am including these instructions in my manual for hopefully no future use. Your right, simple fix, but I still would not attempt brain surgery!
@donslade992 жыл бұрын
Left (hot) handle had worked loose after install 9 years ago. Couldn't figure how to tighten. Had to use a flat rubber jar lid untightener to get a grip on the lower 'cylinder' part. Your clear & detailed video helped me fix a 3 month old problem. Thanks !!
@stallionguns34946 жыл бұрын
Thank you for posting this video. I like many others was attempting to remove the caps off the top of the handles. I had a plumber install this particular faucet in my master bathroom and never had the need yet to tighten the handles until now. I couldn't find the instruction manual either to this particular faucet. You ready it was a lifesaver. Thank you so much!
@stallionguns34946 жыл бұрын
Your video was a lifesaver that is and prevented additional aggravation...
@frederickmaas13539 ай бұрын
Just wanted to say thank you for this. 5 years later and you helped me out so much. Thank you!
@karenpoppen94897 ай бұрын
Thank you, Lester. My faucet handle had totally come off. Thanks to your video, I was able to replace it, and it's working perfectly. Just a tip for others who also have handles that have come off--close the drain hole before you start so you don't lose the screw down the drain!
@LesterMartinATL5 ай бұрын
great tip about closing the drain hole!!
@Cowpoke034 жыл бұрын
Thank you so much for doing this video, My husband asked me to see if I could figure out how to tighten the handle and your video was the first I came across. He was very happy with how easy it was to not only tighten the handle but clean all the hidden dirt under the cover. Great help, Thanks :-)
@JM-mz7wx8 жыл бұрын
Thank you! My entire "cylinder" section was loose, not just the handle. I couldn't figure out how to tighten it down...I thought the problem was under the sink. After watching the video all I had to do was tighten the cylinder! That saved me an embarrassing call to my plumber.
@BowHunterNman773 жыл бұрын
As soon as you started disassembly I could figure out how to tighten the handle, tool free, that kept popping off. Simple and to the point. Thanks
@pamelaentrikin67267 жыл бұрын
My faucet looks different, but your repair worked! Thanks for sharing! I've been living with that jiggly handle for MONTHS. Took 2 minutes to repair. Thank you!!!!
@LesterMartinATL7 жыл бұрын
I guess this design is pretty widespread. It makes so much sense ONCE you figure it out and I'm thrilled this short little video has helped so many not pull their hair out. :-)
@michealodrisceoil65956 жыл бұрын
This is not the traditional handle cap design. Brilliant... you saved me from getting a chisel out to remove the cap and ruining the whole handle. Thanks!
@triglideadventure52354 жыл бұрын
Almost 5 years and still relevant. Thank You! I DO consider myself a handyman, but couldn't figure this one out until I watched your vid.
@erfanq3 жыл бұрын
Thank you so much for the hint. I have been fooling around for long time to figure out how to dismantle the handle of this faucet to no avail. I had to buy a new one and install it, but kept the old one to repair at one point eventually so that I can use it to replace others that may go bad in the future. Today, after watching your video I was able to open it up and repair it by cleaning the interior and replacing all the o-rings. It became new again and saved me a hundred dollars. Thank you again!
@LesterMartinATL3 жыл бұрын
Glad I could help!
@spencerwelch72544 жыл бұрын
Same brand, different faucet. Literally just had to hold the top and twist the base to tighten. Rare to have a first video solution. Thanks!
@karenbloch52964 жыл бұрын
We have this exact same faucet- THANK YOU so much for your demo Lester!!! We fixed it in less than a minute!
@texastoolstore84775 жыл бұрын
Awesome video. I'm sure it was a few plumbers who gave you the thumbs down. This video saved a lot of people from running their sink and needing to have it professionally replaced. Thank you for the post!
@LesterMartinATL5 жыл бұрын
You might be right about the few thumbs-down I have received. ;-)
@mgysgtusmcretired37322 жыл бұрын
I never would have known how to remove the lever without this video. Thank you for taking the time and effort to share this.
@seanmackey85525 жыл бұрын
Thanks, man! I'm a retired plumber and couldn't figure that out. You saved me a lot of grief!
@mikemelisky71396 жыл бұрын
I was about to try to chisel off that stupid cap. Thanks for the video. I’ve never commented on a You Tube video before but this was a huge help. Thanks!
@LesterMartinATL6 жыл бұрын
That's the path I was going down myself. Hehe!
@SPQR-Z5 жыл бұрын
You sir are the Facet whisperer. That loose handle on our Moen was driving us crazy trying to figure out
@LesterMartinATL5 жыл бұрын
I think I like that title... Hehe
@danieltrottier9704 Жыл бұрын
This video was so helpful! We had a loose faucet handle and we had no idea how to fix it. We really appreciate you sharing your knowledge with us!!!
@bolinmusic10 ай бұрын
Thank you! Have the same faucet and tried, as you did, from the top. I had tried the base earlier but didn't turn hard enough. After your demonstration, I did it again and was successful. So glad I found your video. Thank you for giving back!
@jerryg39288 жыл бұрын
Perfect Lester. Thank you for taking the time to figure it out AND post the solution. In my case the base did not unscrew. This is because the plumber/installer had been very enthusiastic in clamping the fixture to the counter top. A little loosening from below and it was just as you described in your video. Thanks again for posting.
@MrSmellsmoke6 жыл бұрын
that was fantastic, i watched your 60 second video and fixed mine in 30 seconds. you r the man.
@MNM14ful3 жыл бұрын
Thank you very much for your tutorial Lester. My handle began to be hard to turn and I wanted to fix but I just couldn't work out how to remove the handle. I felt around for a screw but there wasn't one. Then, I discovered your video and found out how easy it is to remove! So easy that even me, the non-handyman can do it. Much appreciated.
@alinadykman62066 жыл бұрын
Thank you so much! 30 seconds, and my faucet isn't wobbly any more! Worked like a charm for the Moen Mason.
@lawrencethal13879 күн бұрын
Thanks so much for your video !! I too would never have guessed they designed an upsidedown screw in there. I saw the threads and the bottom of the screw but didnt realize it was a bottom of a screw. Youve saved me days of frustration !!!
@LesterMartinATL8 күн бұрын
oh... there were more than a few days of frustration on my part! haha. i mostly put this up so I would remember how to do it again in the future. so awesome that it has helped so many!!
@kathyperry70567 жыл бұрын
Thank You, Thank You, Thank You!! I was going to call a plumber for my loose handle, but because of your video, I fixed it in 3 minutes!! I looked at so many videos just to find out how to fix my loose handle, couldn't find one & so glad I found yours!
@AKJeeper7 жыл бұрын
Thank you so much for posting this. I was just a second away from ruining the handle by attempting to remove the "fake" screw button cap with a knife! Even Moen's website isn't clear on how the handle is attached - the exploded diagram doesn't even show a screw in there! Good thing I thought to look it up on KZfaq before potentially destroying something. Thanks again!
@LesterMartinATL7 жыл бұрын
Don't think I didn't try to remove that cap a few times with a screwdriver!! Glad the video helped.
@timshel0113 жыл бұрын
I was going the drill through the cap with a dremel to get that @@@ cap off. Then pry that ### cap off...Thanks for video!!!!
@uncletoon20106 жыл бұрын
This was exactly what I needed. Thank you for taking the time to make this video and covering the problem so clearly!
@EdTate3 жыл бұрын
Lester, Thank you. I had wasted hours trying to find an answer. Your fix took minutes!
@Tracysop1 Жыл бұрын
You just saved me $150 plus shipping. Not to mention the aggravation of figuring out how to replace our faucet that I thought was broken. (That handle has been falling off for SIX years!😂)
@jamescashby6 жыл бұрын
Thank you for sharing your discovery. Very helpful and to the point for me and evidently for the other viewers who have commented. Yes, as you have guessed, the faucet is a Brantford 8 in. Widespread 2-Handle Bathroom Faucet.
@dcyoung49 Жыл бұрын
So glad you made this video. Thank you for giving back. Thank you KZfaq for making this possible.
@neilrogers2423 жыл бұрын
You helped me! I had the same problem and your video saved my faucet. The best part is I have this exact faucet. : ).
@Giz1202566 жыл бұрын
Thank you Lester. This was very helpful. Not an intuitive repair, so I'm glad I found your video.
@bookmobile7 жыл бұрын
THANK YOU FOR THIS VIDEO!!! I was going crazy trying to tighten my faucet handle and saw NO screws anywhere (also, no brand name/model number so...). Anyhow, tried your technique, had trouble gripping so used some shelf liner to help grab. Totally did the trick. Thanks again!
@keepcalmandplaydefense55265 жыл бұрын
I suspect that the 9 dislikes are the contractors who will lose hundreds, perhaps thousands over the years for no longer being able to perform this house call issue again. 😂🤣😂🤣. Love the video and I was literally on the phone with a contractor who wanted to charge me for just coming out two days before thanksgiving... I am truly grateful to you for this video. I did have trouble unscrewing the stem but that was before I found an old rubber wrist band to grip with and it came right off.
@LesterMartinATL5 жыл бұрын
You are probably right about the dislikes. LOL. So glad this video has helped so many folks.
@JohnHoffman65 Жыл бұрын
I approached the problem just like you did, initially. Thanks for this handy guide. I fixed it in less time than it took to find your video😊
@jayjudd6518 Жыл бұрын
Apparently it was a husband that had to fix something that the wife looked up . Ho Lee Chit!! Ha Ha !
@frankcirone4280 Жыл бұрын
Thank you.
@mchaelallen3 ай бұрын
Disliked for two reasons. Brain surgery can be 'easy', and demonstrating on the handle in back, instead of the obvious handle in front of the camera.
@doc95264 жыл бұрын
Wow. I’ve had a leaky faucet for a while. I turned off the water underneath until I could figure out issue. Today while under lock down, thought I’d look at KZfaq to see how it could be fixed by me. A plumber would be minimum $150 house call. Your video was the first I looked at and it seemed like my issue. One handle had too much give. The Kohler handle simply had the Phillips screw on top. Tightened it and checked other. Turned water back on and viola! Thank you for your video!
@walfod3 жыл бұрын
Thanks so much for sharing this. Moen's website had an exploded view of parts but no fix-it or installation instructions. I had the exact same problem, on the cold side too. Thanks to you it ended up being a 2-minute fix. Brilliant!!
@victorjohnson33887 жыл бұрын
Thank you Sir, it is almost embarrassing to know I could not figure that out. You saved me an enormous amount of time.
@gchachul8 жыл бұрын
OMG! I was driving myself CRAZY trying to figure out how to get to the screw so I could tighten it! Thank you VERY much, Lester!
@LesterMartinATL8 жыл бұрын
+Giselle Chachula I have to admit half of the motivation for posting this was that it would be an easy way for me to remember how the heck this weird thing works!! Glad it was helpful.
@annreeg23706 жыл бұрын
Still a great fix - I just fixed 3 of these in my house - all installed exactly two years ago - one handed had already fallen off. Thanks for posting - took 5 minutes for all 3
@aottaviano13 жыл бұрын
I have this faucet and was struggling with this. Thank you so much for the video!
@leslieormond73295 жыл бұрын
Thank you...this busy mom just fixed the faucet!!! Never could have done this without your clear video. Thank you so very much!!!! God bless you!
@ThomasSprouse6 жыл бұрын
Thank you for the post! I have a different faucet but the principal was the same... took me longer to find a magnetic pickup tool... after watching this video.
@patburroughs2604 Жыл бұрын
Really appreciate you posting this video - just what I needed to figure out how to tighten the handle on our bathroom faucet - so easy once you know how!
@Chiccp1013 жыл бұрын
Oh my gosh! I glad I found this video! Such an easy and quick fix. Thank you Lester!
@miguelpedroza80366 жыл бұрын
Man, thanks a lot... as many others, I have spent some time (weeks) thinking how to fix it... then, KZfaq came to my mind and I found you... the fixing was done in 2 minutes... thanks a lot.. I will look for you anytime I need to find easy solutions at home... All the best..!!
@br3jam4 ай бұрын
I noticed this video is 8 years ago. Just viewed it today and worked perfectly! Thank you
@LesterMartinATL3 ай бұрын
some things stand the test of time! ;)
@michaelmeehan95564 жыл бұрын
Thank you very much for posting this! Who knew it'd be so easy? I looked and looked for the allan set screw and once I realized it wasn't there, I was scratching my head. Then... I thought, KZfaq! Lo and behold, there was your video. Thanks very much! A honey-do list item that I was wondering just how long it would take turned into a quick two minute job. Wonderful! :-)
@paulbrungardt98233 жыл бұрын
Thank you! Mine was a simple need to tighten the handle. I would have otherwise tried to pry cap off of top. No idea that lefty loosey on handle was the way to disassemble it. I would have marred up surface. Thank you for taking time to make this video.
@Zoo1424-w7o3 жыл бұрын
Thank you! It was more difficult to search out how to fix this than it was to get it fixed. I appreciate you putting this up.
@MrJonathanWills5 жыл бұрын
Yep, Still helping people almost 4 years later. Thank you sir for the video.
@LesterMartinATL5 жыл бұрын
I never expected this video to get some many views; haha. I actual post stuff related to my job and have gotten no where near this number of hits. Maybe I need to change jobs!
@TimHorne5 жыл бұрын
Thank you for this video. It was a great help. While my faucet was a different model (the spout and handles are all separate) it was still Moen. The faucets are only a couple of years old so being the person I am, my loose faucet had to be fixed ASAP. I tried to figure it out but just as you first tried I went from the top down. Fortunately I decided to google it before going further. Much appreciated!
@LesterMartinATL5 жыл бұрын
It is surely weird. Heck, half of my reason to record the video is so I wouldn't forget how to do it again in the future! :-)
@craig7257 жыл бұрын
Thank you so much. I just moved into my new place a couple months ago and I am the worst handy man ever. You are a lifesaver.
@ronpaster17133 жыл бұрын
Thank you for posting this. I literally was seconds away from buying a whole new faucet and BAM!!! Problem fixed - yes sir.
@michaelcleary44194 жыл бұрын
I don't have the exact Moen faucet but this video saved me plenty of time and aggravation plus I didn't damage the top of the faucet handles
@pamelahegarty79582 жыл бұрын
Thanks! This has helped me twice now. It turns out my faucet bottom just needed tightening, but I wouldn't have figured that out without your help.
@Go1US1Marines5 жыл бұрын
Thanks. I just had a plumber here for other work, and he did the same. Many faucets are similarly designed. Also, he mentioned that Moen has a repair kit that deals with the same issue if it cannot be fixed as pointed out in this video. I suppose if it is worn past a certain point, the repair kit is the way to go.
@cog31648 жыл бұрын
Thanks so much for figuring out this problem. I also have a Moen Brantford for the bathroom sink and the handle was very loose. No instructions as it was assembled by our contractor who remodeled our bathroom a few years ago. We are a tightened now.
@LesterMartinATL8 жыл бұрын
+cog3164 sounds great; I'm just glad it was able to help somebody. I really scratched my head for a while and tried hard to pry the top of the levers off to no luck. heck, I put it on YT as much to remind me should I need to do it again! ;-)
@markjones25172 жыл бұрын
@@LesterMartinATL Lol, ok two beers!! 🙂
@sharonmckay99352 жыл бұрын
Thanks a bunch!!! Like others, hubby tried to take the caps off; then I turned to KZfaq and we both watched your video. Fixed both bathroom faucets in a matter of a minute. Yay!
@rody.69423 жыл бұрын
THANK YOU! I had to go through 5 different videos and yours finally repaired my loose faucet handle! Thank you!
@xsteel32925 жыл бұрын
Thank You. The lower part under the lever was wobbling after a year on mine. After seeing this I knew what to do. Literally 3 minutes for the search, watching and tightening. Good as new! Thanks again.
@dhlee6272 жыл бұрын
(3/20/22) This did it! My hot water faucet was leaking (left one), and I was looking for ways to take it apart when I ran across this site - was able to turn loose as described, disassemble, and fix the leak (had to play with the stopper and some 'banging'). Thanks much!
@krussiadad21453 жыл бұрын
Thank you! Been frustrated over a year now and just found this.
@pabloparis303 Жыл бұрын
Totally worked! I have been annoyed by my loose faucet handle for years now. Thank you!!
@user-vc5zd8pc9p7 ай бұрын
It's not my faucet, but it's similar enough that it's the same concept. Thank you so much!
@geraldblack33864 жыл бұрын
Thank you! My faucet was a Moen Boardwalk faucet instead of a Moen Brantford faucet, but the two models are designed the same and the solution in the video worked perfectly!
@jrflyer9308Ай бұрын
Thank you. Perfect explanation! A five minute fix for an issue that had been bothering me for years.
@planetmaxwell4 жыл бұрын
Thank you! Was trying to pry the cap off...and your video saved me from ruining my faucet!!!
@lawrencemiller4041 Жыл бұрын
Thank you also... very helpful instruction indeed. I did however have to apply done WD40 to the seem of the turning mechanism of the faucet, which removed the stiffness and the movement returned to normal. This video however provided the knowledge on his to remove and replace the faucet easily... thx again!
@Dennis-tu5gw3 ай бұрын
You are a life saver...Think how much $$ to call a plumber to fix this loose handle...I thought for sure what you had initially thought. Thanks for showing me the "easy peasy" way.
@LesterMartinATL3 ай бұрын
Glad to help
@BrianSnyderPhotography6 жыл бұрын
Thank you! I have the same faucet and a loose cold water knob also but could not figure how to tighten until I saw your video... and it is now fixed.
@dukebacher12162 жыл бұрын
THANK YOU! I had one valve clogged, and I couldn't find instructions how to remove the handle so I could clean the stem. Thanks to you, I have hot water at my bathroom sink again!!!
@leroynorville4129 Жыл бұрын
Thanks for your help I was able to tighten up a really loose handle. This video helped me alot. I was like you in the beginning, when you mentioned about uncapping the little thing on top of the handle. I realized that I couldn't do that. That's when I found your video. Thanks again for posting this.
@TomFlak4 жыл бұрын
I was scratching my head on this one...and your video solved it for me in a couple of minutes - well done!
@timvandyke81654 жыл бұрын
Wow, a 1 min 48 sec. Video with a great tip. I have been trying to get the top off as well. And I see so many others have been helped and are commenting after 4 plus years! Thanks!
@eileenschneider79543 жыл бұрын
You are a lifesaver! I was going crazy over how to fix the loose handle. Thank you so much!
@Mpc09192 жыл бұрын
Just moved into a rental and this video was exactly what I was looking for. Thank you for posting.
@bilbothejust5 жыл бұрын
You just saved me a lot of fiddling around. FIxed two sinks in a minute! Thanks.
@thepthealer Жыл бұрын
just what I needed. plumber came over and said we needed to buy this part and that part. What he needed to do was to watch your video.
@brettludden98102 ай бұрын
Thank you! It does indeed feel too obvious now. I looked at it for months. I appreciate you, whoever you are.
@LesterMartinATLАй бұрын
YW; I'm just your Friendly Neighborhood Faucet-Man (ish). Glad it helped!!
@robforrest20696 жыл бұрын
Thanks for posting this. I was just about to pop that button off the top! Thankfully you showed it was even easier than I thought! I would have never guessed that's how you remove it to tighten it. Thanks again!!
@nancy96558 жыл бұрын
I've been stumped for some time about my loose faucet; watched one other but then saw this one that closely resembles my own...now I'm going to run home to give it a try...I sure hope it works because it looks easy, peasy! Thanks for the insight!
@LesterMartinATL8 жыл бұрын
+Nancy Crane good luck
@nancy96558 жыл бұрын
update...I did exactly what you have on this video and it worked! My faucet handle is now secure...thanks!
@jaysheaffer439 Жыл бұрын
Thank you so much…. I have a different Moen faucet, but it’s designed the same way. No way I’d have figured this out on my own.
@jayjudd6518 Жыл бұрын
Brother I feel the same way. Crazy
@danduhman195511 ай бұрын
Just like you, thought a Phillips or Allen wrench would fix it. 5 min of model # research and specific issue repair, and I land on your vid. 👌 🙏. You are the man. 👍
@bam111965 Жыл бұрын
Thank you! I"ve been trying to figure that out for weeks! My tub faucet is just like that. It worked perfectly!
@prakaashselva6437 Жыл бұрын
This is Moen 6610ORB faucet model. Thank you very much for sharing this video