Tile Redi Shower Pan REAL TIME Install, Less Than 20 Minutes

No video

Tile Redi Shower Pan REAL TIME Install, Less Than 20 Minutes

Рет қаралды 56,815

Күн бұрын

Some people don't believe our product can be installed in 30 minutes or less, so we filmed a real time install of the Tile Redi shower pan, being completed by 2 installers in 19 min 24 sec.
Tile Redi offers the ONLY leakproof, one-piece shower pan with integrated drain on the market that's ready for tile!
Made in the USA 🇺🇸
Feature List
✅ Leak Proof - Manufactured as one piece with integrated drain to ensure water proofing.
✅ Pre-Pitched - No need to worry about making sure your mud bed is pitched, we've got you covered.
✅ Integrated Drain - Peace of mind that the drain connection won't leak.
✅ Customize - With Redi Your Way®, any size, any drain location, as many or few curb(s), one entrance or multiple entrances, raised or lowered splash walls, basically, if you can dream it, we can build it!
✅ ~8x Faster to Install - 30 minutes or less is all you need, compared to hours with our competitors.
✅ Easy & Lightweight - Carried and placed by one person, reducing the total time needed on site.
✅ USA-Made - Made and warehoused at our factory in Indiana with no supply chain issues.
✅ Fast Shipping - Order today and It's shipped within 3 days on most products.
✅ Complimentary Products - From benches to niches and ledges to drains complete your shower easily.
Learn More at
tileredi.com/

Пікірлер: 50

@johnh4679 10 ай бұрын

You might not like it, but this what peak male athleticism looks like.

@mrs.i.one12 4 ай бұрын

Me and my husband installed one in our spare bathroom yesterday . Followed the directions and today it’s solid as a rock! Thank you so much. I will recommend this to everyone I know!!

@TileRedi_US 4 ай бұрын

Great to hear!

@querty292 3 ай бұрын

We really need one that doesn’t require the mortar mess

@SMS38i Ай бұрын

Based on their most recent video, they have one. The custom and commercial ones are flat bottom, set in thinset, based on the new video

@mightyluv Жыл бұрын

I was a bit worried about doing the mortar part of the installation; thanks for posting this.

@paulmeyer7530 11 ай бұрын

Amateur here ... not a pro. I might have added some foam blocks between the studs and a temporary curb to sort of 'contain' the mud, but it looks like it didn't flow off the pad the way I thought it would. Nice!

@thedon98677 Ай бұрын

Now grab some DIY guys, and have them do this on a concrete subfloor with the need to be 100% precise and fast as crap to get the drain connection done before the glue set up!

@wc6975 10 ай бұрын

how do you install the drain connection if you do not have access from below?????

@davidgapp1457 5 ай бұрын

It means you have to get the drain pipe lined up precisely with the hole in shower pan BEFORE you lay down the mortar. So typically you do this before laying down the floor on a new install, but if you're upgrading your shower and the new pan does not align with the old drain, then you'll need to access the drain piping (typically by removing sections of the floor which you'll need to replace later). I would not use the method shown in this video for creating the necessary mortar bed.

@garybaugh8302 Жыл бұрын

If so how many 80lbs bags did it take?

@IPlead5 5 ай бұрын

Um, this is the simple part. How about connecting the drain that would be stubbed through the floor?

@TileRedi_US 5 ай бұрын

It's not difficult. You can view TileCoach's video on the drain connection here: kzfaq.info4yoJbod1mUE?si=lAtRdiCbSLYrzUTx

@ikediamond 6 ай бұрын

That’s a big step into the shower

@TileRedi_US 6 ай бұрын

Our curbs are usually 4.5" high. If you prefer a zero entry shower pan we also offer our Barrier Free pans. We can also accommodate custom curb heights if desired using our Redi Your Way shower pans.

@brentdreisbach6829 6 ай бұрын

@TileRedi_US I have a question re: your instructions. My maximum rib depth is 2" at the end away from the drain. Instructions say mortar bed should be max depth (2") minus 1/2". Question is, should the mortar depth be 1 1/2" all the way to the drain, or should the mortar bed be sloped to match the rib depth minus 1/2" all the way to the drain? Near the drain, the ribs are only 1/2" deep, so a 1 1/2" mortar bed won't allow for the pan to set level.

@TileRedi_US 6 ай бұрын

The mortar bed should be ½ inch less than the deepest rib under the entire pan except for under the drain, staying 1 inch away from the side walls. Only put ½ inch of mortar under the drain where the ribs are shallow (from the front of the drain to the wall). Feel free to call us if you have additional questions: 954.323.0125 ext. 212.

@DavidLee-vu2bc 10 ай бұрын

What is the black sheeting you are putting down onto the plywood before installing the mortar?

@TileRedi_US 8 ай бұрын

It's a layer of black tar paper on the subfloor.

@jeanettecrabb1713 4 ай бұрын

I see the two bags i got wont be nearly enough

@sthrnvoice3198 Ай бұрын

I’m not trying to be stupid here, but what exactly is the purpose of checking level on random wall studs three feet up from where the pan is going to be? I’ve seen it in two different videos… I am officially bewildered

@TileRedi_US 6 күн бұрын

It's to make sure that your entire shower stall is level and plumb. The pan is the first step in the installation and the walls follow. If you now need to shim the walls to make them plumb, it's best to do before the pan is in.

@garybaugh8302 Жыл бұрын

What was the size of pan 72"×36" ?

@jeanettecrabb1713 4 ай бұрын

Are the screws going above the pan to temporarily hold it in place?

@TileRedi_US 4 ай бұрын

Yes, they should be screwed above the splash wall and not through the pan. The idea behind this is to hold in place so the pan will not shift as the mortar cures.

@bgBlea 7 ай бұрын

why is the tar paper needed? can't you use a damp sponge on the plywood before setting the mortar or would the plywood absorb too much water regardless?

@TileRedi_US 6 ай бұрын

Roofing paper is recommended so that the subfloor doesn’t absorb moisture from the mortar bed.

@davidgapp1457 5 ай бұрын

@@TileRedi_USIt is also a good idea to decouple the shower pan from the floor. Tiny movements induced by thermal stress and flexing are relieved by decoupling the subfloor from the mortar. Plus, should you ever need or desire to replace your shower, a decoupling layer will make replacement much simpler.

@mrs.i.one12 5 ай бұрын

What kind of mortar mix is it I can’t tell please name what kind you’re using.

@TileRedi_US 5 ай бұрын

Type N or Type S Mortar needs to be used to set the pan.

@dubi7879 7 ай бұрын

sorry but i dont see a 20 minute install. i see two guys with all pmaterials prepped and stocked. at bare minimum its labor x2 for time. decent video though. did you charge 20 minutes for the install or how did you work your labor ticket?

@mrs.i.one12 5 ай бұрын

Is it mortar mix or what mix are you using I ordered a shower pan and am ready to install but I don’t know what you’re using thanks in advance

@TileRedi_US 5 ай бұрын

Type N or Type S Mortar needs to be used to set the pan.

@sanjivpatel6866 10 ай бұрын

So, I watched the video and noticed that there seems to be a black, thick substance before the cement steps. Do you think it could be the shower pan liner?

@TileRedi_US 8 ай бұрын

It's a black tar paper used on the subfloor.

@midwest9757 7 ай бұрын

@@TileRedi_USwhat is the purpose of doing that?

@kenhoward127 6 ай бұрын

@@midwest9757 To prevent the wood subfloor from absorbing all the moisture from the mortar.

@JPTX80 6 ай бұрын

@midwest9757 A vapor barrier to separate the moisture from the mortar bed and the wood subfloor

@ByronPoindexter-un8vh 6 ай бұрын

@@midwest9757it keeps the water from the mortar from soaking into the subfloor and causing the mortar to dry too fast and not cure properly.

@mrs.i.one12 5 ай бұрын

What size drain?

@TileRedi_US 5 ай бұрын

Our drain hub fits into a standard 2" drain pipe.

@jl456 7 ай бұрын

Why such a large step to get into the shower seems like too much

@TileRedi_US 6 ай бұрын

The height of our standard shower pans curbs are 4.5" high. Zero entry pans can be found on our website under Barrier Free shower pans. We can also accommodate any desired curb height with our custom Redi Your Way pans.

@h2oespi541 Жыл бұрын

So tile redi first then backer board / cement board?

@brehoffm Жыл бұрын

Yes, pan first then backer board per the instructions. The outer edge of the pan is .5” to accommodate the backer board, then your tile will go over both seamlessly.

@TileRedi_US Жыл бұрын

Yes, your wall boards will go mounted on the pan splash wall.

@jacobcairnes521 Жыл бұрын

Now, what goes on the walls?

@TileRedi_US Жыл бұрын

We've recently launched our new product Redi Wall which are waterproof wall boards that sit on the shower pan splash walls.

@charlesbutterfield995 6 ай бұрын

This this is a really BAD video. There is no audio commentary and no captions so much of the activity is just puzzling. For example is the mortar bed supposed to be flat or sloped. The written instructions that come with a product are confusing on that point and a silent movie of 2 guys in hurry doesn't provide any answers

@TileRedi_US 6 ай бұрын

Thanks for your feedback. This video was posted on KZfaq to simply provide some backup to our statement that a shower pan can be installed in 20 minutes. We have our other installation videos that provide complete audio commentary with tips along the way for proper installation. We apologize if this video caused some confusion, the general idea was to show the entire process from beginning to end.