TIME RXS pedal rebuild (bearing replacement)

Рет қаралды 4,820

Darrel Stickler

6 жыл бұрын

A link to the web posting I reference is: www.bikeradar.com/forums/view...

Пікірлер: 14

@reinholdachleitner2069 4 жыл бұрын

Thank you hugely for the awesome Time RXE pedal bearing replacement video.I've had my RXE's for year's and was baffled on how to service them.Thanks again.Cheers.

@PaulGreenberg911 5 жыл бұрын

Thanks! I love my RXS pedals and this will extend their life.

@reinholdachleitner2069 4 жыл бұрын

Howdy Paul,Time make the best Pedals,road or MTB,they last forever.This video is the best,Cheers.

@katsumisasaki3651 Жыл бұрын

How to adjust the clip out of it like adjusting it from easy to release and hard to release

@Itstinner Жыл бұрын

Hi thanks for the demonstration. One question, when you tapped the new bearing back in I presume you are in contact with the bearings race as you mentioned that you shouldn't make contact withe bearings rubber seal?

@darrelstickler Жыл бұрын

The brass nipple I found matches the diameter of the inner race, so you don’t push on the seal at all. I wandered around Home Depot with calipers looking for a cheap solution since I don’t have a lathe to make one. It’s also nice the nipple is brass (soft), lessening the chance of nicks or dents.

@galbraithian 3 жыл бұрын

terrific thanks!!!

@learnalanguagewithleslie 4 жыл бұрын

Question: are these hollow axles? If so, do you know what the diameter of the internal hole is? Can't find this info anywhere. Thanks.

@darrelstickler 4 жыл бұрын

Solid axles

@rossdonaldson5545 3 жыл бұрын

Are the bearings you found not from Time themselves? Eg - were they just the right size but found elsewhere? I’m in the U.K. and would like mine done but Time don’t do a service kit unfortunately 🤦🏻‍♂️

@darrelstickler 2 жыл бұрын

Bearings are purchased-not manufactured-by Time. I found the spec on line, researched different bearing mfrs, picked my favorite country of manufacture, and bought them. High quality bearings are more expensive, but trivially so for an application like bike pedals. It probably isn’t an accident Time didn’t have the mfr label the bearing, but it’s actually a standard bearing and easily found if you have experience from work or whatever. Just buy what I showed. High quality. Worldwide availability.

@rossdonaldson5545 2 жыл бұрын

@@darrelstickler I bought Hope bearings for mine

@Itstinner Жыл бұрын

@@rossdonaldson5545, would like to get Hope bearings and only found one bearing size for Hope pedals... are they the Hope mountain bike flat pedal bearings?

@darrelstickler Жыл бұрын

@@rossdonaldson5545 interesting. I wonder if Hope makes bearings or if they have a vendor white label bearings. The world’s best bearings are only made by maybe three companies (two from Japan and one from Germany). Perhaps Hope is owned by one of them?