Bed liner will peel off. I tried it on my deck held up for a year. Use paint with sand mixed in it.

Eddie you can get white and black reflective tape to replace the red and white

Eddie although that trailer looks sick with all the the lights done the side but FYI all lights from rear axle back must be red and all lights front of axle amber/yellow

Check out mag drill bits. They themselves are badass little machines, can drill horizontal with ease through thick thick metal.

I added marker lights down my 24ft equipment trailer as you did. A few of the amber lights I made work with my blinker. 3 per side - so approximately every 8 ft. Somebody driving a lane over on a highway can see I'm coming over from anywhere along the vehicle and trailer. I also tricked it out with some underlighting which helps immensely with knowing right where the trailer is at night when backing up and the cool factor of changing colors (can even make them flash amber for roadside emergency). I also, added a 48" light bar mounted underneath on a 5ft x 3" pc of channel for protection.and stability, operates from a switch for lighting up the back and behind my trailer for night loading and that lights also when i place mty truck in reverse. My trailer is 102" w so I mounted 2 36" light bars at the front for night loading and lighting the deck. Also added spiked neo chromed lug nuts lol.

DOT wants amber in front of the axles and red behind them, looks good though!

You're an absolute tools addict hahaha i love it man, great vid!

What did you use to wiring the clearance lights together

Looks good man

Got pulled over hwy patrol has to be red from back of rear axle to rear he was cool gave me a fix it ticket

Good job Eddie 👍🏻 that’s a badass trailer !

Do you need truck taillights ?

A few too many for my liking but still looks good. Amber goes in front of the axle and red in the rear btw

I am doing the same thing to my trailer, were you worried about adding all the lights to the trailer without a fuse or anything?

How exactly did you wire those lights ? All the led tap into the the trailer harness and every single one has a ground ? I’d like some info

Red and white stickers are cool they will grow on you. I want to put some on my they old they look nice at night

What brand are the drill bits and step bits

Just a heads up. But here in Texas where you put the yellow marker lights toward the back would be a ticket. Idk if California is the same but wouldn't be surprised if they were.

Jamming that Aldean though on the KZfaq 👊🏻🟥⬜🟦🍻

Do you have any pictures on how you wired the lights together?

I want to do the same but I’m hesitant about structural on the trailer. Do you think Swiss cheesing the frame would weaken it ?

Milwaukee is a good brand but there drill bit suck I burn them to fast or they broke I went to dewalt no complian

Where has Efren been?Sure do miss that guy.It's been a year ➕ since we have seen or heard from him.

Never enough chicken lights!

Hopefully you have your class a cuz I know that trailer is more than 10,000 GVWR 👍🏽 but yes sir you got chicken lights on that trailer now 10-4 keep on trucking 👊🏽

TIME TO UPDATE THE GARAGE LIGHTS

Ryno 2.0 lol

Looks like a christmas tree

If trailer gross is over 10,000lbs you have to have cdl it sucks but the law now!

Truck under 26K no cdl. Truck GVW over 26K CDL. Add trailer over 10K CDL A. Criminal offense. Cop will ticket you. By the time you go to court you will have needed to go to a CDL Class A driver school and pass. You will pass. Easy drive test is with a Day Cab Semi single axle with a short 43" trailer. EZPZ. Go to judge. Ticket dismissed. Bonus: State Police respect Class A drivers because they absolutely must keep the DL clean.

You just discovered step bits? Haha

God Bless in Jesus Christ Name Amen.