TIMING BELT AND WATER PUMP SERVICE ON A V6 HONDA

TIMING BELT AND WATER PUMP SERVICE ON A V6 HONDA :: 2014 HONDA ACCORD J SERIES

Рет қаралды 6,464

Күн бұрын

In this episode I film a little preventative maintenance on this Honda Accord. It only had 35k miles but being about 8 years old, the timing belt service is due. We replace the t-belt, water pump, t-belt tensioner, front crankshaft seal, serpentine belt tensioner and the customer requested we replace the serpentine belt tensioner.
Amazon Affiliate links to some of my favorite tools, I make a small commission but at not extra cost to you, it helps support the channel and the hard work that goes into making weekly videos, thanks! These are not the cheapest tools but dang are they good! And have very good warranties, some of them lifetime:
Milwaukee M12 3/8" Ratchet with Battery - amzn.to/3VpvBe9
Milwaukee M12 3/8" Ratchet Bare Tool - amzn.to/3Wux6cu
Milwaukee M12 Stubby 3/8 Impact Driver with battery - amzn.to/3C7Ijr4
Milwaukee M12 Stubby 3/8 Impact Driver Bare Tool - amzn.to/3vhntlv
Sunex Metric Impact Socket Set (My absolute favorite sockets, especially the swivels!) - amzn.to/3Wuxmbs
Vessel Impacta Screw Driver Set (Best quality screw drivers for the money!) - amzn.to/3Z61YBV
Knipex Plier/Cutter Set - amzn.to/3viZ7rq
High Leverage Ratcheting Wrench Set - amzn.to/3WMoZYl
0:00 Intro
0:42 Drain Coolant
1:02 Disassembly
5:21 Timing Cover Removal
6:18 Set TDC
8:22 Timing Belt Removal
9:41 Crankshaft Seal Removal and Install
11:35 Water Pump Removal
13:08 Reassembly
13:49 Timing Belt Installation
17:55 Coolant Bleeding Process

Пікірлер: 36

@SkillCollectors Жыл бұрын

Love doing these jobs, as long as there's no surprises, it's always quick and easy.

@droid2816 Жыл бұрын

That was a lot of work... even with the right tools. HONDA messed up putting a timing belt instead of a timing chain on the v6. Thanks for the video

@SkillCollectors Жыл бұрын

Glad it helped.

@khanhdang8342 4 ай бұрын

Excellent skilled tasks. I wish I am younger again to try doing that jobs for my 2014 Accord V6. Only 76653 miles so far.

@CesarsCarCorner Жыл бұрын

It looks like it went smoothly! Great work!

@SkillCollectors Жыл бұрын

Thanks dude, no hiccups thankfully 🙏

@atanashurkin7851 Жыл бұрын

This was perfect for what I gotta do for my car!

@SkillCollectors Жыл бұрын

Glad it was helpful

@ua7pyro591 Жыл бұрын

Love the music, love the videos 🔥

@SkillCollectors Жыл бұрын

Thanks 🙏

@TaMaSouLjAh 6 ай бұрын

Great video.

@shanetseng6040 5 ай бұрын

What tool setting did you use to take off the 10mm bolts on the upper timing covers? I am having hard time doing that. Maybe because I haven't taken off the engine foot mount section?

@MrSamPhoenix Жыл бұрын

Love this video, will you be doing a valve cover gasket job on this vehicle?

@SkillCollectors Жыл бұрын

Not this car specifically but if I get one scheduled for me, I'll be sure to film it.

@ericrollins4607 10 ай бұрын

A couple of questions: Do you have to change the crank seal, is there a jack under the engine before removing the motor mount?

@SkillCollectors 10 ай бұрын

Negative on the crank seal, we just do it since we're there as preventative maintenance and that passenger side mount does not really support much weight so I remove it without a jack under the oil pan. If it seems like it's sagging excessively though, it wouldn't hurt to put a jack under there to support things until you remove it.

@pall5114 Жыл бұрын

Great video. I have the same 2014 Accord V6 with 83k. The dealer told me it was time for a timing belt based on years(7yr). Have you seen many timing belts break based on 7-10 years? I live in the Northeast NY area so not sure if the weather plays a big role. I was hoping to wait until 100K miles. Also, how many hours are this job timing belt, water pump, and tensioner? The dealer wants $1900 including parts, which seems a bit high. Any advice is appreciated, Thanks.

@SkillCollectors Жыл бұрын

That seems a bit high. We recommend t-belts based on the same schedule though. 7 years or 100k-ish, which ever comes first. I haven't seen any J series belts break but I have seen teeth shear off. Don't remember the mileage on those but they were pretty old. I'd say you're probably ok but plan on doing it within the next 15k. This particular car was one of the easier J series timing belts I have done, takes me a few hours but I also have a lot of experience and can knock these out fast. I don't know our exact pricing but I think our shop charges $1200-ish for this job parts and labor.

@pall5114 Жыл бұрын

@@SkillCollectors Thank you!! that is helpful

@MartialMartian Ай бұрын

How much would this service typically cost?

@katolight Жыл бұрын

Do you need to replace the cam shaft seals?

@SkillCollectors Жыл бұрын

I only touch them if they're leaking or if I have to disturb the cam shaft (remove the cams), otherwise, I leave them alone, in my experience, J series cam seals almost never leak, even very old and high mileage ones.

@hatemalami2746 2 ай бұрын

did you have to do crank relearn procedure?

@SkillCollectors 2 ай бұрын

In my experience, after a timing belt job, I've never had to do that. Usually that's done after replacing the sensor.

@shanetseng6040 5 ай бұрын

Does the engine need support after you take the engine mount off?

@SkillCollectors 5 ай бұрын

No, it only drops about an inch or less in most cases.

@ReneharryValdiviaquiroz-lt3ck 6 ай бұрын

Que marca es ese rachet

@atanashurkin7851 Жыл бұрын

Does the car need to be in drive or neutral to turn the crank bolt to tdc?

@SkillCollectors Жыл бұрын

If it's a manual, it has to be in neutral, otherwise, just leaving it in Park is fine.

@atanashurkin7851 Жыл бұрын

Thanks for the clarification!

@fzr1000981 2 ай бұрын

Assume you meant water pump not oil pump

@vicentegonzales3852 Жыл бұрын

How many miles have to replace timing belt on that car ?

@SkillCollectors Жыл бұрын

Usually around 100k.

@GKirkland1 2 ай бұрын

Looks like your removing tensioner pulley, tensioner etc. from underneath the car while it’s in the air. How did you support the engine after you removed the motor mount?

@Jimmyxsx Ай бұрын

Put a floor jack under the oil pan

@daveclark8337 12 күн бұрын

There's 2 other motor mounts still supporting it, so just removing that one doesn't allow the engine to move much.