TIMING BELT WATER PUMP SERVICE ON A V8 TOYOTA : 2004 TOYOTA 4RUNNER 4.7L SR5

No video

TIMING BELT WATER PUMP SERVICE ON A V8 TOYOTA : 2004 TOYOTA 4RUNNER 4.7L SR5

Рет қаралды 7,981

Skill Collectors

Күн бұрын

Пікірлер: 21

@AL_0401 3 ай бұрын

Money is tight right now for me so I’m going to attempt to do it myself. I hope I don’t screw it up😂

@Do-iz6qd 3 ай бұрын

ditto!

@SlimNubster Ай бұрын

Hey bro, how'd it turn out?

@marksimmons3801 Ай бұрын

breaker bar 7/8 short socket and starter will break the crank bolt loose

@SkillCollectors Жыл бұрын

That crank pulley bolt was ON THERE.. phew

@joec6746 3 ай бұрын

Great video. I see the tools used but, do you have a list of part numbers for water pump, gasket, associated seals required....? Thanks

@CesarsCarCorner Жыл бұрын

When did 4Runner get a V8? It looks like the old 4.7L that came in the old Tundra! Great video!

@SkillCollectors Жыл бұрын

That generation is when it started. It’s the exact same engine as the tundra and sequoia!

@carlosguzman7207 Ай бұрын

That's the only 4runner came out v8 very good car

@ronaldo77782 Жыл бұрын

Why is important not to line up the timing marks to the T ?

@SkillCollectors Жыл бұрын

Because those are not the proper timing marks for timing belt installation per the service manual. Not sure what those marks are to be honest. Someone mentioned they are ATDC marks (After Top Dead Center) but I don't know.

@ronaldo77782 Жыл бұрын

@kristofflutchman I did research it ,so after aligned all of the marks at TDC, they should be move to the T marks so it will be out of tension and prevent the belt to jump backwards.

@Koala_z06 Жыл бұрын

Fly you out for a head swap and clutch install on a z06?

@SkillCollectors Жыл бұрын

Yikes, no experience with that haha

@valtierrafamily8176 7 ай бұрын

Hey bro u didn’t have to rotate the crank pulley twice to verify ur timing marks because everything was on tdc?Just asking cause everyone always seems to turn it after they install the belt.

@SkillCollectors 7 ай бұрын

OEM belts have marks on the belts, if they all line up with the gears, it's in time. Toyota makes it really easy.

@Do-iz6qd 3 ай бұрын

So you changed the timing belt at TDC and didn't advance 50 Degrees? This is doing my head in....who's right?

@SkillCollectors 3 ай бұрын

Not sure what you’re referencing but for what it’s worth, I’ve done dozens of these timing belts this way at this point in my career and they’ve all been in time when finished with the jobs.