How to Program Allen Bradley PLC Training for Beginners
Рет қаралды 440,729
Күн бұрынThe basics of Programming an Allen Bradley PLC including Allen Bradley Controllogix, Compactlogix, Micro820, Micrologix, and SLC 500 PLC products. This is based off of our popular Allen Bradley PLC Training Course. We will go through selecting your cable, configuring your communications drivers, uploading and downloading a PLC program, and starting to write your first PLC program. In this PLC programming lesson, we will use Rockwell Automation's Studio 5000 / RsLogix 5000 and Connected Components Workbench.
Get the full details of this lesson at twcontrols.com/plc-lessons
Items used in this video:
PLC Trainer twcontrols.com/plc-trainers
The above links make these videos possible. Please use them!
Support these videos while you you learn: courses.twcontrols.com/
Subscribe to our channel kzfaq.info...
00:00:00 Introduction
00:04:33 Allen Bradley PLC Software
00:05:54 PLC Programming Cables
00:10:13 RsLinx Serial Driver Configuration
00:17:52 FactoryTalk Linx vs RsLinx Classic
00:18:20 RsLogix 500 Upload, Download, and Go Online
00:23:57 Connecting over USB with FactoryTalk Linx
00:26:06 Studio 5000 Upload, Download, and Go Online
00:32:22 Connecting over Ethernet with FactoryTalk Linx
00:58:46 Unrecognized Device in RsLinx Fix with EDS File
01:05:36 Connected Components Workbench Upload, Download, and Go Online
01:10:06 Basic Ladder Logic Instructions
01:29:25 Programming a Start Stop Seal In Motor Control
01:34:21 Studio 5000 Alias Tags
01:37:35 Studio 5000 Online Editing
01:45:14 RsLogix 500 Native Addressing to Studio 5000 Tags
@TimWilborne 10 ай бұрын
Subscribe to Become a Better Technician kzfaq.info
@sridharpathipaka 2 ай бұрын
Can you provide me the hardware kit for my self practise. If so how much do you charge for setup in the above video?
@longlivelinux90 5 ай бұрын
Thanks man, just got hired as a PLC Programmer - I start tomorrow. Your video was extremely helpful, and I feel much more confident walking through the door tomorrow.
@TimWilborne 5 ай бұрын
Best of luck!
@michaelknight4041 4 ай бұрын
Hey bud, can I ask do they have Allen Bradley PLCs at your new job? Hope things are going well with it btw! I did shift maintenance at an OSB mill for Weyerhaeuser for about ten years. Alot of plc work almost exclusively Allen Bradley. They had PLC 5s, SLC (slick) 500s, micrologix, contrologix, im probably forgetting a few but you get the idea. The most fun job I've ever had troubleshooting and programming PLCs, VFDs and all kinds of other stuff.
@longlivelinux90 4 ай бұрын
@@michaelknight4041 yeah we use allen bradley exclusively. We build custom panels/skids and install asi networks, hmi's, anything the customer wants. I have SO much to learn, but i can tell my company is really invested in me. I am being trained on the whole process to be a controls engineer. And i will finish my bachelors of controls/automation engineering in about a year. So far ive helped set up a pasteurization line for the dairy industry, connected hundreds of devices to an asi network in an applesauce plant, replaced and programmed a vfd, written some I/O routines. Im starting to work with ladder logic and HMI panels now. Life is good. I love it.
@technicaleset5313 2 жыл бұрын
The amount of detail you have put in this video is absolutely amazing. Loved it. Definitely going to dig in more of your videos. great stuff.
@TimWilborne 2 жыл бұрын
Awesome, thank you!
@penfredrickson5888 Жыл бұрын
Thanks so much for this. Been working as a water treatment operator for almost a decade, have created my own SCADA in python. It used raspberry pi with a breadboard to display green and red lights for on/off operation of motors/pumps. I wasn't sure the direction I wanted to go, but as soon as I discovered plc programming, I really felt like this is for me.
@TimWilborne Жыл бұрын
That is great to hear Pen!
@dannywhite4574 2 жыл бұрын
Tim and Amber, great video. Some of it I knew, a lot of it i did not. Thanks for your time
@TimWilborne 2 жыл бұрын
Glad you learned something new Danny. Thanks for watching!
@mattmcgough3381 2 жыл бұрын
loved this video and love all the content you put out. As a maintenance tech dealing with allen bradley plc's at a high pace distribution center your content has really helped. keep it up!
@TimWilborne 2 жыл бұрын
Glad to hear it Matt!
@jeremymcdonald5281 2 жыл бұрын
Thank you so much for this channel and your time! You are literally making my life better and i am extremely thankful! in the years to come, when my knowledge and experience will suffice, i will pay it forward by teaching the same as you have. This channel is truly a gift and a wealth of knowledge that is priceless! Thank you, again, Mr. Tim Wilborne!
@TimWilborne 2 жыл бұрын
You are so welcome Jeremy! Thank you for your kind words!
@TanWinner Жыл бұрын
1:53 1:54
@johnkoury1116 Жыл бұрын
This is awesome. I am a chemical engineer and I come across PLC's all the time. I just never had the time to learn to program them. This is so cool.
@TimWilborne Жыл бұрын
I'm glad you like it John!
@johnkoury1116 Жыл бұрын
@@TimWilborne Absolutely my friend. I need to watch more to get my PLC "fix" for the day but it is helping me to understand how these things are programmed. thanks again.
@r-o-r293 Жыл бұрын
I'm definitely about to Binge all hours of you guys videos
@TimWilborne Жыл бұрын
That is great to hear, thanks for watching!
@sahand944 9 ай бұрын
Thank you so much for this channel and your time! You are literally making my life better and i am extremely thankful!
@TimWilborne 9 ай бұрын
You are so welcome and thanks for the comment. You made my day!
@izlo5176 Жыл бұрын
thank you tim. watched the whole video tonight and will be going into day 3 of working with the trainer tomorrow with a lot better understanding of what is going on. have been using a laptop to connect with an awful right click function i’ll have to get a mouse to connect as that tip is essential
@TimWilborne Жыл бұрын
I am glad you found the video helpful.
@SuperDoom4000 2 жыл бұрын
Thank you! This was very helpful!
@TimWilborne 2 жыл бұрын
You are so welcome!
@lutorres2003 Жыл бұрын
Tim all your videos are great.
@TimWilborne Жыл бұрын
Thank you!
@navinsookram 2 жыл бұрын
Excellent teaching technique Tim, hello from Toronto
@TimWilborne 2 жыл бұрын
Thank you!
@LearningInVR 2 жыл бұрын
Always learn something Thanks!
@TimWilborne 2 жыл бұрын
You are welcome.
@dumbtex6107 10 ай бұрын
Appreciate the video it really helped me understand what exactly plc programming is and actually made the whole thing seem really simple. Now to dive into your other videos and make stuff start happening !
@TimWilborne 10 ай бұрын
I'm glad it was helpful!
@cosmosprincess20 Жыл бұрын
Omg thank you for explaining download vs upload! I've literally overwritten all my logic and thought it would be really embarrassing to ask for help at work... Only to realize I just didn't understand what downloading meant. Ah I definitely learned the HARD way
@TimWilborne Жыл бұрын
Unfortunately many of us did!
@mohammedabdaziz272 Жыл бұрын
brilliant work, thanks a lot
@TimWilborne Жыл бұрын
You are welcome
@TheHexxxtor Жыл бұрын
Thank you so much Tim
@TimWilborne Жыл бұрын
You are very welcome
@techtopics5782 2 жыл бұрын
Just as a note at 38min in, to find an IP address. I use an IP scanner to find the address of a PLC. Most show a description and it will say something about AB... Product etc. Most modern routers have firmware improvements that reserve IP addresses matched to device descriptions so if you connect a device often it will "reserve" that IP for that device. Thought that might help.
@TorontoTea Жыл бұрын
Thanks for the Video!
@TimWilborne Жыл бұрын
You are welcome!
@LearningInVR 2 жыл бұрын
Will watch again and learn something different later.
@TimWilborne 2 жыл бұрын
Thanks for watching!
@jessekoontz Жыл бұрын
really like your program.
@TimWilborne Жыл бұрын
Thank you!
@bunnyman6321 Жыл бұрын
Thanks Tim
@TimWilborne Жыл бұрын
You are welcome.
@craigtudor8708 7 ай бұрын
Morning sir, and thank you for providing this , nice refresher if ya been out if the field some time......
@TimWilborne 7 ай бұрын
You are welcome.
@electric-nl3fs 24 күн бұрын
Great video, thanks.
@TimWilborne 24 күн бұрын
You are welcome!
@Hewagej Жыл бұрын
Very intresting video Thanks for share
@TimWilborne Жыл бұрын
You are welcome
@francisazaglo1062 6 ай бұрын
Hello Tim, you are doing great
@TimWilborne 6 ай бұрын
Thank you!
@williamhoward6827 2 жыл бұрын
William Howard Chicago's Southside up and coming evolving PLC tech with your Help
@adammustapha4150 3 ай бұрын
Thanks for this Tim. You Rock it.
@TimWilborne 3 ай бұрын
You are welcome 😁
@adammustapha4150 3 ай бұрын
@@TimWilborne can you share me more link on introduction to Allen Bradley and how to translate instructions on Allen Bradley. I'm currently doing PLC in this semester and it's giving me a big headache but with the first video I watch, I believe I have a edge over it now. Thank you.
@TimWilborne 3 ай бұрын
Here is another good one to think though the problems when you run into it. kzfaq.infox_GD2c11tX0
@adammustapha4150 3 ай бұрын
Thanks Tim👊
@technicaleset5313 2 жыл бұрын
Thank you Tim for this brilliant work. Could you please also tell about retentive tags?
@TimWilborne 2 жыл бұрын
All tags in the Controllogix and Compactlogix are retentive.
@technicaleset5313 2 жыл бұрын
@@TimWilborne Nice Thank you.
@rorozco70 Жыл бұрын
Thanks!
@TimWilborne Жыл бұрын
You are welcome.
@jarude5009 2 жыл бұрын
By chance do you have a video about the HMI side of this? I can't seem to find a proper one. I'm using RSL 500 with a AB Panelview 600.
@TimWilborne 2 жыл бұрын
Check out this playlist on the Panelview 800. kzfaq.info/get/bejne/iMCGd9h1qte6lnU.html
@tahaeng4389 2 жыл бұрын
Thanks a lot my best teacher . I am need wire less control system for Allen Bradley software Scada system
@OkurkaBinLadin Жыл бұрын
Subscribed, Mr. Wilborne (y)
@TimWilborne Жыл бұрын
Thank you!
@timgascoigne2248 Жыл бұрын
Great Channel and video. At the beginning of my PLC journey. What cable do you need to connect to the Allen Bradley SLC S/04 system?
@TimWilborne Жыл бұрын
The bottom port is a 1747-CP3 90% of the time but could be a 1747-UIC depending on the configuration.
@ohuuangkhoa9967 Күн бұрын
Hi Tim, I'm from Vietnam, and an international student studying at college in Canada. My next term includes an Allen Bradley Micrologix 1200 PLC course, so is it possible for you to do some Allen Bradley Micrologix 1200 PLC training video instructions, this video helps a lot with PLC concepts for my program studying, so hope you consider my request. Thank you for helping me gain some knowledge of PLC.
@TimWilborne Күн бұрын
Here is a link that will help you. Good luck! courses.twcontrols.com/courses/allen-bradley-rslogix-500-plc-programming-lessons
@ohuuangkhoa9967 6 сағат бұрын
@@TimWilborne Thank you, Tim, I appreciate that
@dinotom1 2 жыл бұрын
Anyone know if Controllino works with Sure Step steppers from automationdirect?
@ethangarrett4193 2 жыл бұрын
Your channel is amazing. Is there any chance you work with Wonder Ware? If so would you do any Archestra videos?
@TimWilborne 2 жыл бұрын
Thanks Ethan. I work with it sometimes but it isn't on the list to make videos about.
@rentrahs 2 жыл бұрын
Greetings mr Wilborne. May you suggest a good and affordable 4 to 20mA signal generator model?
@TimWilborne 2 жыл бұрын
See link below. plctools.com/products/plc-tools-sim-alp2-4-to-20ma-analog-simulator-and-0-10vdc-generator
@benedalati1527 Жыл бұрын
Could you please do a video showing how to create an internal relay in Studio 5000. I can't not find anything in KZfaq that actually shows that. A simple ON/Off would be great. Thanks BenE
@TimWilborne Жыл бұрын
Just create a BOOL tag and follow this video, it works the same as an input or output. kzfaq.info/get/bejne/ouCAqLh8s9y1cWw.html
@sunilsisodia51 11 ай бұрын
Thanks you are explaining very good I want know about knitex 5500/5700 communicate with hmi
@TimWilborne 11 ай бұрын
I'm actually working on a custom Kinetix training right now 😁
@kgauravb 2 жыл бұрын
Sir I have a very silly question, how to check in studio 5000 in my case V29 which analog input / channel is free to use, and if I found one how to use that? Sorry for the silly question as I'm new in Allen Bradley plc.
@TimWilborne 2 жыл бұрын
Great question, right click the parent tag... As in before you specify CH0Data for example.... And select cross reference to see which ones are used.
@rick53able 2 жыл бұрын
hello Tim is there an online course I do not master English with a good teacher like you I think I could master both
@TimWilborne 2 жыл бұрын
You can learn a lot with the videos on our channel, check out the Connected Components Workbench videos.
@sukumwit 2 жыл бұрын
It will be great if you post a video explaining Closed Loop PID Control using ML1400 for Speed Control. Thank you in Advance!
@TimWilborne 2 жыл бұрын
Here is a start. kzfaq.info/get/bejne/j6l-gLl2lbGsfYk.html
@stationfarm7561 2 жыл бұрын
wow.hi hellow ser.example project you so good.
@TimWilborne 2 жыл бұрын
Thank you very much
@johnwade3476 10 ай бұрын
Always put the software on a usb fastened to the panel somewhere it's so cheap to do just do it !
@TimWilborne 10 ай бұрын
I agree, that is a great practice!
@priyankasaini8184 Жыл бұрын
good
@TimWilborne Жыл бұрын
Thanks
@baldeval2851 2 жыл бұрын
I'm thinking of becoming a PLC programmer what type of laptop are you using and does it need a ethernet cable or inlet thank you
@TimWilborne 2 жыл бұрын
See if this video helps. kzfaq.info/get/bejne/gp11p7Vov53Nep8.html
@automationpk6720 Жыл бұрын
You also make video of fatek plc and discuss all troubleshooting skills thanks from Pakistan
@TimWilborne Жыл бұрын
Never seen one of those.
@automationpk6720 Жыл бұрын
You don't know fatek
@TimWilborne Жыл бұрын
I think that's what my previous reply said 🤣
@carlosgarciaborrego 2 жыл бұрын
I am having a problem with Studio 5000, My toolbar is cutting the symbols for the language elements. Can anyone help me with this? really appreciate all the help. I tried to adjust the resolution I'm using windows 10 I already look in the internet but I can find any explanation.
@TimWilborne 2 жыл бұрын
I recently have had the same problem. I haven't had time to dig into it so let me know if you figure it out Carlos.
@user-rw1pp3nh9e 2 ай бұрын
Tim I have a PLC-5and it came with Allen Bradley 6200 software. I wanted know what it would take to convert from the DOS format to Windows format. Do I need a copy of RSLogix 5? And what adapter?
@TimWilborne 2 ай бұрын
RsLogix 5 is the Window's equivalent to 6200 but for one PLC, it may not be worth the money if you are not going to have to connect to it often. Another option would be a virtual machine such as Virtualbox to emulate a DOS session on a modern computer.
@stevemanning4236 Жыл бұрын
The x did not dispenser on the diver when you plug it back in
@TimWilborne Жыл бұрын
I'm not following your question. If the X doesn't go away then you need to check your communications and cabling
@ericespino7361 Жыл бұрын
can you use usb overol ip?
@TimWilborne Жыл бұрын
I'm not following your question Eric.
@jeffbodovsky1199 2 жыл бұрын
Do have any videos that I can purchase? CDs or on Flash Drive?
@TimWilborne 2 жыл бұрын
No, everything we have is right here. Anything in particular you are looking for?
@jeffbodovsky1199 2 жыл бұрын
@@TimWilborne Most anything you have for AB series 800 (810, 820,). Wiring, setup, but mostly programming.
@TimWilborne 2 жыл бұрын
@@jeffbodovsky1199 Here is a good playlist on the Micro800 kzfaq.info/get/bejne/bMuPZbepm8jRnYE.html
@angelalicea4753 Жыл бұрын
Excellent video Tim. I have a question, When I created startbase tag, it wasn't in the Controller Tags with Scope to the whole project, however it was in the drop down menu for tags in the instruction and when I changed the scope to main program in the controller tags. Why that happens and if there any problem to let it in that way?
@angelalicea4753 Жыл бұрын
Ok, I think that I figure out why it only appears in the main program. When I created the tag, the scope was set to main program only. I have no idea if that can affect the logic of the program or not.
@TimWilborne Жыл бұрын
Controller tags are accessible from anywhere in the PLC, program tags are localized to the particular program. Make sure they are controller scoped if you want to span programs or read from another PLC or HMI.
@angelalicea4753 Жыл бұрын
@@TimWilborne thanks a lot for that tip.
@TimWilborne Жыл бұрын
You are welcome!
@Junder2982 6 ай бұрын
what laptop make and model do you use in your training classes?
@TimWilborne 6 ай бұрын
Various ones but you don't need much to start programming PLCs. This is an older video but I think most of it still holds true. kzfaq.info/get/bejne/gp11p7Vov53Nep8.html
@CanisValleyMaple Ай бұрын
Great video so far. Can some or all PLCs communicate with both 485 & 282 simultaneously? For example, I haven't found a water flow meter as of yet that can do 485 and it seems that most digital devices out there use RS485 protocol.
@TimWilborne Ай бұрын
485 is an older protocol but still fairly common. Many PLCs still support it
@CanisValleyMaple Ай бұрын
@@TimWilborne gotcha. Can PLCs connect and communicate with both or would i need to get a translator so they report back in the same language?
@TimWilborne Ай бұрын
It is very dependent on the PLC
@CanisValleyMaple Ай бұрын
@@TimWilborne Thank you. Really appreciate your quick replies Tim.
@gieviernes8005 2 жыл бұрын
Hi sir i really want to learn plc programing but i dont know how to start..can you plss help me how to start from the start...thank you
@TimWilborne 2 жыл бұрын
What is the most popular PLC in your area?
@gieviernes8005 Жыл бұрын
@@TimWilborne allen bradly sir
@francoistitti6094 Жыл бұрын
Do u offer in presence training ?
@TimWilborne Жыл бұрын
Don't know what presence training is.
@francoistitti6094 Жыл бұрын
Student show up at your local /class
@mississippihuas Жыл бұрын
Where is your class ?
@TimWilborne Жыл бұрын
Roanoke, VA
@joeshmoe8952 2 жыл бұрын
I’m trying to become a electrician, I want to do residential & commercial. Do I need to learn PLC if I want to become an electrician?
@TimWilborne 2 жыл бұрын
Hi Joe, not for residential and light commercial.
@joeshmoe8952 2 жыл бұрын
@@TimWilborne Ok cool, thanks.
@sasimastreeranai8922 Жыл бұрын
What program do you use to write
@TimWilborne Жыл бұрын
It depends on which hardware you're using.
@sasimastreeranai8922 Жыл бұрын
@@TimWilborne thank you
@bigt95nt011037 4 ай бұрын
What is the best lowest cost A&B trainer?
@TimWilborne 4 ай бұрын
The Micro800 PLCs. Here is a video I did on selecting a PLC when starting out. kzfaq.info/get/bejne/hJ5yqdCpmLnWYmw.html
@bogdandjcross 3 ай бұрын
hy from roumania
@TimWilborne 3 ай бұрын
Hi!
@mydollarsrnland7003 Жыл бұрын
Running into alarms code
@user-nx5kd6em3m 7 ай бұрын
Stephen from Uganda
@TimWilborne 7 ай бұрын
Hi Stephen!
@luvordub 2 жыл бұрын
31:01
@icanreadthebible7561 2 жыл бұрын
"The Cable Fairy" will always creep into your cable storage area and tangle your cables when no one is watching. (Faster than CLX5K scan time.)
@TimWilborne 2 жыл бұрын
You got that right!
@mvmega1934 4 ай бұрын
hi tim wilbome good am new here
@TimWilborne 4 ай бұрын
Welcome!
@Rx7man Жыл бұрын
No other software has frustrated me more than RS500/5000 and RSlinx, SOOO many version specific dependencies, licenses, etc.. That was 15 years ago, I'd hope it would have been improved by now but I am a pessimist and it probably has only gotten worse
@TimWilborne Жыл бұрын
Or maybe you need more practice 🙄
@Rx7man Жыл бұрын
@@TimWilborne Thanks, I'm good :P I've gotten over the recurring nightmares of being out on a service call and in my whole bag of cables I didn't have THAT one, or a license expired, or someone updated RSL500 but not RSlinx and they would refuse to talk to each other. RSL5000 was much nicer to use, for one, it would remember symbol names on the PLC and you didn't need to have the original file, that was a really big help These trayformers are what I used to build kzfaq.info/get/bejne/o7elnttjrt_dfGQ.html
@TimWilborne Жыл бұрын
So you rant to the guy who is trying to help you?
@Rx7man Жыл бұрын
@@TimWilborne I didn't mean it that way at all, great vid that I wish I'd have had back then.. take it more as comiserating with you for the poor design of AB software :)
@elizeusimoes490 2 жыл бұрын
🥳🥳🥳🥳👏👏👏👏👏
@user-xj4hq3md3n 8 ай бұрын
I think green should all ways be ONLY used as ground wire this should be a universal practice. as an electrician it all ways bugs me to see green used under power in other applications even low voltage
@TimWilborne 8 ай бұрын
Interestingly green for ground is the only wire color specified for UL 508A control panel.
@vishaltomar7447 8 ай бұрын
How can we learn free programing
@TimWilborne 8 ай бұрын
Check out Connected Components Workbench courses.twcontrols.com/courses/allen-bradley-micro800-plc-training
@ArioGraham 11 ай бұрын
💣💜 💜 💜
@1234Tubie Ай бұрын
After a long 26' I still have NO idea exactly what the heck he was trying to show
@TimWilborne Ай бұрын
Long 26 feet? I think you wandered off onto the wrong video
@jessekoontz Жыл бұрын
some reason i cant get on chat
@TimWilborne Жыл бұрын
This is an old live stream. We are live every few weeks so subscribe to know when we hope on.
@Eliasgeta1 Жыл бұрын
Hi I am Elias, please I need an individual class for PLC hands-on, can we arrange this and how can I communicate with you, Email or phone no.
@TimWilborne Жыл бұрын
You can learn more about our hands on training at the following link. twcontrols.com/allen-bradley-plc-training
@march11stoneytony 10 ай бұрын
I thought this was Doug Benson for far too yoo long
@TimWilborne 10 ай бұрын
I have heard that before :)
@shaggygangst 2 жыл бұрын
coming from siemens this seems a lot of mess.. am'i missing something?
@TimWilborne 2 жыл бұрын
Sounds like you should stay with Siemens then....
@shaggygangst 2 жыл бұрын
Ahah i didn't mean to offend you Tim, but if this is a latest way of developing for Allen Bradley then Siemens is in another world..
@TimWilborne 2 жыл бұрын
@@shaggygangst You are not offending me, I don't work for Rockwell, but I hear the same comment from Rockwell users who try to transition to Siemens and I tell them the same thing. You have two choices, stay in your world or broaden your skillset. But don't use my videos as a platform to complain about what you don't like about one or the other.
@rogueninja1685 2 жыл бұрын
Just learning PLC, but an hour and a half to get some code on the screen after fighting windows, bad programming logic, and stepping around landmines where you can kill a whole companies operations sounds like the worst system ever invented. From a laymans view, this looks like an absolute cluster f. I have extensive Java programming and a machining background so I'm not totally new. Maybe I jumped ahead a bit on the subject but from my understanding, AB is an industry leader so I was expecting a completely different experience when watching a video describing to beginners how to talk to their systems
@TimWilborne 2 жыл бұрын
Java programming still puts you in the newbie category, have a look at some of our lessons series. twcontrols.com/plc-lessons
@chriscockrell9495 7 ай бұрын
Shouldn’t be open cabinets for safety Controller tags vs program tags. Download and upload are from the plc perspective. NOT your perspective. USB only good under 6 ft
@joelcarpenter167 2 жыл бұрын
Awful nice to see someone giving away information that taxpayers paid for
@TimWilborne 2 жыл бұрын
Taxpayers? The government must have forgot to send me my check 😂
@danielgarcia19 Жыл бұрын
Thanks!
@TimWilborne Жыл бұрын
You are welcome 😁
The Engineering Mindset
Рет қаралды 1,9 МЛН
Scantime Automation & Training
Рет қаралды 157 М.
SolisPLC
Рет қаралды 33 М.
SolisPLC
Рет қаралды 262 М.
business Us
Рет қаралды 11 МЛН
Wylsacom
Рет қаралды 356 М.
EZ-GLAZ
Рет қаралды 37 МЛН