Tingle Tension System

Рет қаралды 23,058

Күн бұрын

For those of you that have brought or are looking to buy a Tingle Tension System from Bulkman3D for your Workbee CNC follow along as I walk you through the installation.
Link to the New UltimateBee by Bulkman3d: s.click.aliexpress.com/e/_DeH...
Get your Tingle Tension System here: s.click.aliexpress.com/e/_Bfh...
Thank you again to Bulkman3D for providing me with this kit to do the installation video.
The Workbee kit I have (disclaimer affiliate link): s.click.aliexpress.com/e/sGS1tOak
The embarrassing part: If I have helped you out and you would like to support my channel any paypal donations to bit.ly/3cnI37L will be very much appreciated but not expected!
New upgraded kit with Linear Rails (disclaimer affiliate link): s.click.aliexpress.com/e/_AmOfAa
Link to the exact kit I ordered (disclaimer affiliate link): s.click.aliexpress.com/e/sGS1tOak
Thanks to Ooznest and the Openbuilds for their design.
Music Thanks To!
--------------------------------------------------------------------------------------------------------
Adventures by A Himitsu / a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
Free Download / Stream: bit.ly/2Pj0MtT
Music released by Argofox • A Himitsu - Adventures...
Music promoted by Audio Library • Adventures - A Himitsu...
--------------------------------------------------------------------------------------------------------
Flying High by FREDJI / fredjimusic
/ fredjimusic
Music promoted by Audio Library • Flying High - FREDJI (...
--------------------------------------------------------------------------------------------------------
Lights by Sappheiros / sappheirosmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/LightsSappheiros
Music promoted by Audio Library • Lights - Sappheiros (N...
--------------------------------------------------------------------------------------------------------
Song: Chaël - Sparks (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
--------------------------------------------------------------------------------------------------------

Пікірлер: 36

@bulkman3dmedia485 3 жыл бұрын

Great video, as always an excellent tutorial from the team at I'll Do It Myself! Look forward to seeing more from you in the future!

@IllDoItMyself 3 жыл бұрын

Thanks guys really appreciate it!

@graveurgraveur2691 3 жыл бұрын

Thanks for sharing.

@peggyensley4278 3 жыл бұрын

Great videos. I got the Bulkman 1010 about 4 months ago. Great COVID relief! I love the machine and i’m always impressed with accuracy and reproducibility. I do have a problem though that is infuriating. Every once in a while, unpredictably, it goes nuts. This always happens at the end of a process. At the end of a drill operation or a 2D contour or 2D adaptive clearing the spindle will retract and plunge into the spoilboard. Also restarting from a specific line in the g-code is problematic. After the warning about the transition to the new cords. My machine will go to negative z and the dig a channel to the start cords. These problems are not g-code problems and I suspect it is the VNUM. What do you think

@accentpoint6567 3 жыл бұрын

Bought my first WorkBee CNC from Bulkman last June and it has been amazing project for quarantine . Your videos totally saved me when assembling. Would love to know your final motor tune and micro step settings on the TB6600's, Thank you

@IllDoItMyself 3 жыл бұрын

Sure I'm going to do a video on that shortly. But in brief I'm running 1/8 stepping at 3.5amps so that's 200steps for this machine.

@fredericm3503 3 ай бұрын

Superbe vidéo et merci pour cette astuce. A+

@ulkesh78 3 жыл бұрын

This is exactly what i've been waiting for. I can finally run my 1500x1500 at a decent speed without as much WHIP!

@korcsigaming2643 3 жыл бұрын

hello! what kind of router / spindle do you use on your 1500x1500? i read it for that machine size there are problems with heavy routers. i planning to buy a machine, but i am so uncertain about it with these informations :(

@rollthetape88 3 жыл бұрын

@@korcsigaming2643 what do you mean by problem with heavy routers?

@aircooledvw3043 3 жыл бұрын

@@rollthetape88 the heavier spindles 5kg's Air & 6kg's Water create a bow and twisting forces on the Z Axis. The dewalt router weighs just 2kg's

@jamesmanning2711 3 жыл бұрын

I can't wait to get my workbee! I plan on ordering from bulkman as well. Any particular reason for going with the NMVU mach 3 vs the other controller they sell?

@francispaquette104 3 жыл бұрын

mach 3 it's use in professionnal workshop so it's more easy to get info and help on that, other wise its GRBL base you have the freedom of many opensource software but the community is dispatch between them, Also many free GRBL software are really basic and easy to use on the other side Mach 3 have it's learning curve but can serve you for more purpose in the future

@davidbaldry5516 3 жыл бұрын

I have a 1010 Lead CNC kit from Bulkman. Just finished assembling it and I followed your build videos which made life easy, thank you. Would you recommend the tingle tension system for a 1010 or is it overkill? Great Videos man!

@Levisgil47 3 жыл бұрын

Hello, Could you please tel me how long is the new X axis lead screw? Is this 1031mm or 1057mm ? Thanks

@DanMcKennaPhotograph 2 жыл бұрын

Hi great video. One question, Do you think you can just fix the flexible coupler Straight to the thrust bearing? This would prevent the need to add longer bolts and spaces between the motor and the plate !

@user-ve5jj9fn1o 3 жыл бұрын

where do you connect to the dust collector, and how to settle down the pipe of air and dust, this 3d printer parts can you share with, there is not enough room for those. thank you.

@davidtingle6 3 жыл бұрын

No except you will save yourself alot of frustration by using dm542s or dm556s drivers with either syystem. The dvr drivers are nena 17 drivers. A little bit of research will show you you can easily use some quality drivers with either board.

@steveedwards2889 Жыл бұрын

Do you need longer lead screws to fit this system?

@eddiesalas4262 Жыл бұрын

nice vid.. ! i also wanted to buy work bee . but i want to replace the lead screw with ballscrew.. is it possible?

@CNCnStuff 2 жыл бұрын

Could I just ask, please: Would a clamp be better than the locking rings? I was thinking of cutting the clamp end off some spare flexi-couplings and using them as clamps. Thanks

@PaganWizard 3 жыл бұрын

Confession time.............I just binge watched this entire playlist. You need to get a job at Bulk Man 3D, because you have just sold me on this machine, I'll be getting the 1500x1500 though.........just as soon as I have the funds massed up.

@IllDoItMyself 3 жыл бұрын

Haha way to go

@micultimy91 2 жыл бұрын

Instead of that bushing with set screw, use a PETG 3D printed nut with the trapezoidal threading inside and split on one side and clamp that nut with an appropriate hose clamp. I do not trust those bushings with set screws after having few of them broken because of too much torque on the screw.

@gg23g53 3 жыл бұрын

Installed my kit but after 5-10 minutes it loosens up causing the axis to run rough - any ideas? Don't want to over tension.

@IllDoItMyself 3 жыл бұрын

I would suggest getting don't loctite on the set screw as that's what keeps the whole thing tensioned. Done print file it to a point but I have not needed to.

@foxtrot1787 3 жыл бұрын

and for those whos leadscrew doesn't pass through the plate?

@IllDoItMyself 3 жыл бұрын

Follow the link in the description that's the kit which include the longer lead screws.

@johncherry7693 3 жыл бұрын

For some reason my machine is not working correct ive squared it and fir some reason the Y axis shift and makes a terrible noise and the Machine pretty much stopped also on the x-axis it does the same thing trying to home the machine does not work.It keeps going out of square with the whole machine and start to shift I squared it I don't know what else to do I followed all the instructions and ill it does is make terrible noise the x-axis will. Not got side to side with out stopping in think ive tried just about everything to make it work when I. Move the y-axis one side is about 5 or 6mm off from the other side measuring from the backplate to the inside of the y axis plate please help

@IllDoItMyself 3 жыл бұрын

There are many things that can cause this. Make sure your motors are both going the correct direction. Check for binding if you move it by hand. Make sure you have not over tensioned your leadscrews. This almost always is caused by binding or bad motor wiring

@johncherry7693 3 жыл бұрын

thanks for the information

@ulkesh78 3 жыл бұрын

Holy crap the shipping doubles the cost of these!

@IllDoItMyself 3 жыл бұрын

Yeah sadly covid has made the shipping so expensive! I would say try the Bulkman3d site and see if there is a better shipping option for you.

@Jonny_O 3 жыл бұрын

Check all the usual sites (eBay, AliExpress, etc.), as Bulkman prices seem to fluctuate depending on the site. The savings can be substantial.