If you want to trim the metal on the roof properly, get a tool called a nibbler. It is made for cutting across metal panels. The only thing you need to be aware of is that it cuts little nibblets of metal that will fall to the floor of the trailer and possibly the ground. So you will want to put down a drop cloth to catch them. Otherwise, add more screws to the seams as other people have said. You can also get a strip of foam that is shaped like the metal and use it to seal the edges of the roof metal and above the windows. It will stop rain and bugs from getting under the ceiling metal. But for a first time metal worker, you did a great job!!

Unless you seal the edges on the roof. Water is going to seep through when you’re driving it down the road and stay in between the steel roof and your wood roof with possibility of mold. Because there’s nothing to dry it in between the steel roof and the original roof.

You did a fine job, young lady. You can always paint the roof red. I liked your choice in stain. My only suggestion would be to buy a couple more boxes of the self tapping screws and really go over the seams. Going down the road, it will incur more wind than a normal house. Can't wait to see ya fishing and camping out of it.

12:58 Ahh great idea with the tape!! Saves time with the pens and you KNOW it's gonna be STRAIGHT!! 👍👍 ...ok back to it! 😊

Love this! So I just found your channel and binged watched several vids and subscribed. I’m so excited too because after spending MONTHS watching similar content with mainly men doing the things… well let’s just say ur my new spirit animal. I love it!

Great job, Becca, on the redo of your tiny home! You are just SO awesome with doing all these DIY projects! You see the result in your mind’s eye, and then are able to create the reality of it. 😊. We’re all very proud of you, so give yourself a round of applause from us!! 💕

I just stumbled onto this video and I do carpentry for a living and I’m seriously impressed. It is awesome and inspiring seeing a young woman like yourself not be intimidated by learning some new skills, processes, and techniques. You are doing an awesome job! Some of the people commenting were talking about space for the roof to dry out behind the metal. When we put put a metal roof on a house we lay down a couple rows of wooden strapping about 2 feet apart, the strapping is 3/4” or 1/2” but it provides an air space between the metal and the plywood that is covered in ice and water shield or roof wrap. It is just an air space tho. As for cutting the metal and flushing up the ends, if you want to do it quick I always just take a circular saw and put the blade on backwards and then it will cut metal or vinyl siding like butter but please be careful and hold on to the saw, but it is a very efficient and effective way to cut metal siding or roofing or vinyl as well. Make sure to set the depth On the saw so that you don’t have more blade than necessary out. Great job keep up the great work!

It’s beautiful I love it. I love the metal siding.

Pool noodles attached with zip ties could make a cool and colorful band around the edges of the roofing material.

_For the roof, you could get those shears and cut sections inward ✂️ Then bend and screw down the metal._ *The tiny house looks amazing.* 🤘🤘💯💯

Camco Camper/RV Vent Insulator and Skylight Cover. I use them in my rv skylights with damprid moisture collectors and they work like a charm.

It looks awesome! You did that woman!!

Great job girly! Seem like we kinda grew up the same way, with an absolute passion for nature's most wonderful adventures. So super proud of you for owning the damn thing!! Your great good luck and be safe.

BECCA POWER!!!!!! HECK YESSSSSSSS!!!!!!

I actually like the green roof. It looks more nature like and blends in with camping and such. Looks great Becca. :)

Hey Becca awesome job on the tiny house it looks really nice with the wood trim and the metal siding makes it look like professional job. And you are getting really skilled at building , working with tools and putting it all together. Great job. Congratulations. Thanks for the video.

Tiny House coming along nicely Becca

Hi Becca, I haven't added a comment in a good while, but I just had to this time. Girl, you did an amazing job! You just keep getting better and better on your projects. Can't wait to see winter camping in the tiny house. I wish I was fit and young, like you to build by my own tiny home, but I'll definitely live my adventures through you and your awesome videos. Take care and stay safe.

The green with the stained pine looks rad dude 🤙🏼 keep it up!

Good 👍🏻 rebuilding mini trailer house Becca. Next time make it float on water with an outboard motor.

The tiny house looks absolutely great. I like the metal siding and the green roof. If you really have your heart set on a red roof, you could always paint it red. ❤️😊

I've been enjoying your videos. Actually you remind me of an older version of my grandbaby. I dig the new tiny home! I live outside of Durango Colorado. I own 2 acres of land fully off-grid a mile snowshoe back onto the mountain top in the winter and on one acre I have an RV. I have several great fishing lakes around me, one of which is located in a subdivision below me which no license or fee is required to fish on for the residents and it guests. If you ever get a chance and get this way You're more and welcome to park and enjoy the area. Safe travels! 😎✌️

Girl : You Did a Hell Of A Job. And It Look Awesome

Becca the tiny house looks amazing girl, another video from Becca, just what I needed ❤ say hello to Lila and skye for me

Love your videos,invest in a grinder for future projects,it cuts through metal like butter

For future projects when cutting metal siding, you can use a skill saw with the blade turned backwards.

I just bing watched the entire project! Sweet job!

Beautiful build i really love the tin with stained wood look i am going to do this on making privacy fence thank you for video i love to build also ' enjoy your tiny home love it

Don't you just love all the construction lil rhody is gracing us with! Uggggggg Getting my daughter at tg is so fun lately!

Hey Becca! Love the tiny house. My husband works with airstreams and he said the sheet metal will help with insulation. Thanks for the awesome content.

So proud of you great job The only thing I can recommend for you is to get an angle grinder Matabo brand or Milwaukee and use a cutting disk to cut all your metal much easier and less cuts on finger . But great job you will be a great builder one day

Looks amazing!!! Have you ever thought about a built-in bed? I’d love to have something like this. Great job as always!!!

Hey love your video's and fishing camping I love doing stuff like you do.

Amazing job, love the wooden accents!

I think you should build out the decking area by the front door.. stained the same red wood color.

If you ever work with Corrugated Roof Panel again. T square works, but use a cut piece of panel, lay over piece to be cut, mark & cut.

The wood looks nice!

Heck ya. You crushed it!

The tiny house looks amazing. Long loop handle tin sheers tend to work better than straight snips.

I would have tended to tar paper the entire building and seal it, including sealing the seams and the screw entry points. Overall it looks great. Great job, Becca keep up the great work.

Dang! You go Girl! So Impressed!

Looks great! Suggestion: sealing the ends of wood is key defense of weakpoint. I am not surprised people are watching you drive bg...going to be great for your trips! And really upped the cuteneas of the tiny house. Love the suggestion someone gave in comments of buying plastic inserts that fit along edge of curves and roof, to defend agnst rain and bugs on the road; to add to confusion, keep in mind some venting is as impirtant as sealing for mold protection. Travel strong! Looking firward to next adventures.

Also, it looks amazing!!!!!! Love it!

A $20 angle grinder from Harbor Freight and a pack of cut off disks. I used it to trim up the roofing on my cabin and a well house. Works so much faster than snips and you can go across the ridges easily.

Looks great hopefully no more leaks looking forward to the next one!

Looks awesome becca always enjoy your videos keep it going

Hi Becca Old RV tech here You need rubber membrane for your tiny house Go look up local roofers who do rubber membrane work and they always have cut offs Even if you had to do your roof with 3 strips if you have the rubber overlap the edges and then use trim with buttel tape and that baby won’t ever leak

Its looks soo good!! Proud of you 😊

Better get you a couple screws in that tin on the sheet by the wheel wells or if the wind gets under it will rip it off. And also they make a piece of ridged foam to seal the humps on the edge of your roof. Just loosen the screws slide it in and screw it back down. Good luck 👍 looks good good job

Love the new look.

looks really cool with the metal on there good thinking its nice 👍

We used to take a electric hand saw and turn the blade backwards and cut aluminum years ago ! It was noisy but it cut !

Heck yeah proud for you ,it looks great.

Looks awesome!! My favorite!!

Looks great! love the look. Doing it yourself definitely makes it better. Cuts do suck from that but battle scars of learning lol

Nice Build Becca ... You Need A Hanging Disco Ball inside to top it off. Nice Build

Sup Becca, looks good 👍, bought a lot of right things, there's a special caulk can use on seams, isn't cheap but works, when good weather is remove the roof, let wood dry, and use a roofing rubberized coating after seal seams, ten replace the green panels and caulk the seams, the edges can get a grinding attachment for that osculating multi tool? If not for that brand then an angle grinder, there's different discs. I know I have them or did? Been giving everything away because of health, I can't use anymore. Ik have all 3 sizes nail guns, boxes of nails in different sizes, compressor, every air tool can imagine, acute off tool would've cut that fast with no blisters, think have left handed snips still and I used right handed most.. wish would've raised basement months ago, but know all air tools and most all electric tools still there, and what's in the tool chest still have... Be watching, NY was nice👍, tyvm tc 🎣

I recently used a circular saw with a diablo blade from home depot to cut my metal roofing. It cut super clean in both directions.

It looks great.

Side grinder with a cutting disc. Could help with your edges.

Wow Becca beautiful house

Hi Just resently found you. YOUR AWESOME!!! Thanks for sharing your adventures 💜

It look awesome! Good job! 👍🏻

Looks nice, learning skills is a lifetime experience, so keep at it, you are doing great 🙂. When cutting metal, if there is any chance of shards, lay down a catch cloth or tarp to keep your feet and your cut doggie's feet safe. You might experience some wind resistance on that roof while you are towing since you made the ridges of the metal run left and right rather than the traditional up and down (or in this case from front to back with the roof lines) which most efficiently drains the water from high point to low point of the roof. I can see where you would not want the wind of towing to pull up the metal edges while driving down the road if you had placed the metal front to back. I you ever decide to rework which way the roof metal is running, I would bend the edges of the metal down on the front of the house so the wind would not place an upward force on them and would instead place a downward force while towing. I can't tell if you added a ridge cap to your roof, but I hope you did to help keep out the water. You might even cover the entire roof in the sealant tape you used around the vents, the advantage of a cozy space is being able to "overbuild" on a tight budget. Again, nicely done, way to encourage others to get out there and just put in the effort trying out new things. God bless 🙂

Omg so much work. Crossing fingers on no leaks. Love the look of it. Great job.

That turned out really nice ❤❤❤

Hey Becca, Love watching your episodes and your so so rad for living the dream,wish I could rock life like you do.love my fishing but I’m in hospital and been here for 14 months getting treatment trying to get better so I can go fishing again hopefully. Anyway keep it up cos it’s making my day a little easier Much love from Toddy in Australia 🇦🇺

While I doubt it will leak much, I would caulk the seams around all windows. You may have, but I missed it! Additionally, for all screws, caulk them as well. Water is so good at finding the opening! You did amazing! I was thinking this while i saw you were working!

Amazing job becca!! ❤

Looks great! As long as you're having fun and you like it, that's all that matters.

Good idea that looks awesome thanks for sharing ❤

Nice! DIY Becca😊

That darn rain!

Looking good😎very nice job !

That looked a hundred percent better

Your camper is awesome ❤ it

A Sawzall with steel cutting blade a few clamps and a 2x4 will cut everything fast and can cut 10 sheets at a time so the job is way faster and safer plus no blisters and silicon the ends of tin or leaks will diffently happen I know by living in a tin shed for 5 years and I'm getting ready to move back into it and do a bunch of upgrades in spring when I have money to by all I need about 1200 and scrap

I would use a 4 inch angle grinder then seal the cut edges of the metal with paint. Looking good to me.

Looks awesome becca keep it up

Since we use corrugated (galvanize) sheets to cover our roofs, so I know for sure when I say you should have layered the pieces over each other. Makes it more water proof and I hope you did use the corrugated kind because it helps with the rust.

They have like glue strips you put down under the metal to seal the ends. Also you might put some caulking on top of the roof where the metal meets. I know they over lap so maybe you don’t need it.

Just make sure you seal around all the edges of the wood and as far as the metal hanging off the sides you could just fold it over put the wood on top and re-screw it in just to have more protection around the edges

You doing a great job I love it ❤️💯❣️💯

Like the new color

U hvae done a very good job.. .well done

I've never heard of Googan but I'll def give them a try now :)

Angle grinder with a cutting disc 🤘🏼

It looks great hope it's not to noisy in the rain,as long as you stay dry

You do good work Becca .. Nice Video 👍

Awesome job.

10:42 Becca flicks us off LOL. I HATE using tin snips. Luckily I can use air tools at work.

Good morning Becca, Leila & double ear rubs Skye ! What an amazing job on the upgrade ! That look really sticks out ! I hope everything works the way you want it to, eager to see what adventures are coming our way ! Safe travels & keep smiling !

Awesome build.

Cutoff wheel to cut the sheets and a flap disc to sand the rough edges.

What's up, Becca, I was just watching FailArmy, and a video clip popped up of when your boat pulled the back widow from your truck frame. I got excited when I saw it lol. Just thought I let you know 😊

I love the green roof with the redwood trim! Good job!

Another awesome video!!! Thanks Becca❤!!! I love the redo of the tiny house!

Looks great Becca ,you are such a hard worker its great how you try to do things even if your not sure how things will turn out 😊

Gloves... and reinforce your seams where the metal comes together with extra screws. a gust from a semi could catch under one of those seams... Looks great though.

Great job 👏 👍 love it