TinyHawk III HD RTF Kit // No Fuss Starter Kit
Рет қаралды 30,583
9 ай бұрынEmax's Ready to Fly kit is dead simple to get started enjoying FPV. The Tinyhawk III is also available separately.
TinyHawk III FreeStylePlus Ready to Fly Kit - tinyurl.com/ycyd47yf
TinyHawk III FreeStyle Plus Quad Only - tinyurl.com/22u2ysru
TinyHawk III FreeStylePlus From RaceDayQuads - tinyurl.com/ub54uajy
TinyHawk III FreeStylePlus From PyroDrone - tinyurl.com/4cdx63jy
Magnifying Headset - tinyurl.com/mr2cn6xx
🔥Daily FPV Gear🔥
► HDZero Goggle - tinyurl.com/mt7f6auw💣
► Radio I use RadioMaster Zorro - tinyurl.com/3d8emnyj
Zorro @ Amazon amzn.to/3uDFt8J
► Best All Around Micro Batteries!! 💯 GNB 💯
Banggood - bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) tinyurl.com/3d57xeyu
► Adhesive Welder amzn.to/2IpKKHj
► Motor Wire Tape amzn.to/3iJjTrT
► Magnifying Headset - tinyurl.com/mr2cn6xx
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► RaceDayQuads - tinyurl.com/4we9rpzp
► HDZero - bit.ly/3GABBfU
► WeBleedFPV - webleedfpv.com/NickBurns
► FlyWoo - tinyurl.com/3yyfu75w
► GetFPV - tinyurl.com/2nndzn3t
► Banggood - tinyurl.com/429re5uw
► RotorRiot - tinyurl.com/yc8cx8ws
► Caddx - tinyurl.com/yc6r2b82
► AliExpress - tinyurl.com/2p8rybr8
► Emax - tinyurl.com/muex8hyt
► RadioMaster - tinyurl.com/2p97vtsc
► NewBeeDrone -tinyurl.com/mrx7fb2c
► Amazon - amzn.to/3iJjTrT
► MakerFire - tinyurl.com/4xv4yk36
► BetaFPV - tinyurl.com/3t2mn76d
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc
@NickBurnsFPV 9 ай бұрын
Everyone I do have the Tinyhawk III HD as well. That review will be about 5-6 days yet, as there was an equipment failure. Don't forget if you need some vision assistance these are cheap - tinyurl.com/mr2cn6xx TinyHawk III Plus Ready to Fly Kit - tinyurl.com/mst2shfd TinyHawk III Plus Quad Only - tinyurl.com/37c8b9z4
@EniokiFPV 9 ай бұрын
I believe you put the wrong links here? Your links go to the Tinyhawk 3 (non-freestyle version)
@NickBurnsFPV 9 ай бұрын
@@EniokiFPV Sorry about that. I did get them corrected within a few hours of the video going live. Thank you for calling it out.
@kurtzFPV 9 ай бұрын
Those glasses are awesome and seem to make my hands a lot steadier, lol. 30% off at the moment. I just bought a backup because the place where the lens slides in on mine is getting loose after a couple of years.
@EniokiFPV 9 ай бұрын
@@NickBurnsFPV no problem! I figured it could have been a website error but wanted to let you know! Thank you for all that you do for our community Nick!
@BodyTransformerss 8 ай бұрын
First of all I would like to say thank you for your videos. I’ve learned a lot from watching you and also I just purchased bnf tiny hawk, 3 freestyle plus hd and the goggles but I didn’t get the radio. I have the radio master zorro 4 in 1 how can I bind that the hawk with my transmitter I’m a beginner new to the hoppy
@MoeFPV 9 ай бұрын
Great review Nick ! I loved my tiny hawk 2 freestyle. One of the ones I REALLY regreted selling - thought I ‘outgrew it’… now I’m looking at buying this one lol glad to see ELRS 🎉
@amin0_acid310 9 ай бұрын
Well dang, I was thinking of trying to hop up a FS II with HDZero, and here we are. Nice kit too, never thought about hitting switches (I'm a pincher) on this controler. Still, nice kit to get going with HDZero even. Looking forward to more info on the quad itself. Nice teaser showing the starter kit first ^_^ . Looks you deffinatley put it through the paces, thanks for the vid! Cheers
@MCsCreations 9 ай бұрын
Fantastic flying and review, Nick!!! 😃 It looks like a great kit for a beginner! Anyway, stay safe there with your family! 🖖😊
@shanemontgomery8846 6 ай бұрын
I know you probably hear this too much But your physical transformation since the early vids 🤯 Good job brother
@joelpearson8623 9 ай бұрын
Thanks Nick! Always appreciate your take on products. That radio is so close to being the best. I hope they listen to Kabab FPV because I would buy it immediately. The rest of the kit is really good too.
@joelpearson8623 9 ай бұрын
Back in the day I always soldered my motors up wrong. I remember switching the motor wires but always losing my props because the nuts were threaded the wrong way! My fix was to pull the c-clip and switch the motor bells 🤯. Those c-clips would always go flying and it was so stressful! 😅 Nick you really are my favorite reviewer. I hope you don’t ever stop. Thanks for everything
@NickBurnsFPV 9 ай бұрын
If you find your removing c clips in the future try it in a gallon sized zip lock back. This blocks the clip from many of its exit directions. Thank you for the kind words. Appreciate it.
@cubefpv 9 ай бұрын
The Tinyhawk II motors had a non-standard motor mount size. I hope this time they have gone with 9mm motor mounting. Great video Nick and as always good to see a review from someone who knows how to fly.
@kingkieck 9 ай бұрын
I'm so happy they finally brought a freestyle 3 to the table.
@johncarold 9 ай бұрын
Hi Nick, Great video and review of the Emax Tinihawk 3 RTF Kit. I like this kit, the Tinihawk 3 is a fun little quad. I found out that Emax has a 3in bottom plate that you can change for a 3in version. Yes I remember brushed F.C, I was lucky enough to start at the end of the brushed motors and CLEANFLIGHT. Thanks again for the video and information about this kit.
@NickBurnsFPV 9 ай бұрын
yes, they do. I failed to mention that in the video. Didn't get that option to try out.
@derrickcraddock2022 9 ай бұрын
Hey Nick. Good point...if you can't see you can't fly. But overall this is an excellent option for folks looking to try out the hobby. Thanks for this!
@NickBurnsFPV 9 ай бұрын
Yea I wish my eyes hadn’t “aged” but that is life. Lucky I can use goggles at all. Should be thankful 😁
@Nspecthergadget2010 9 ай бұрын
Good review. Nice dives
@gmivisualsjason3729 9 ай бұрын
Excellent as always
@NickBurnsFPV 9 ай бұрын
Thank you Appreciate it
@hit8926 Ай бұрын
great review!
@chickwithstick7695 9 ай бұрын
It's funny how every reviewer uploaded this same model in the last hrs...pushing sales
@NickBurnsFPV 9 ай бұрын
From the outside it may appear that way, Emax might be pushing sales this way. For us reviewing, emax implemented an embargo and set a release date. Both RTF kits have been delayed, not sure why.
@sovietraccoon6007 9 ай бұрын
Have you heard of embargos and review units?
@chalabama80 8 ай бұрын
KZfaqrs gotta make that money from videos and from companies… whether it’s a good product or not…
@sandys-channel 9 ай бұрын
interesting! Seems like an XT30 mod would be a big improvement
@michael1968-m9b 3 ай бұрын
I use my fat shark goggles as i can wear my glasses with that, great video
@MrCrowleyandhisdrone 9 ай бұрын
Great review, ty🙂
@NickBurnsFPV 9 ай бұрын
Thank you
@miquelmarti6537 9 ай бұрын
Althought the range is not spectacular, the video smoothness really is. Time to buy a new TH? No, but I'd recommend it to any beginner (only if they have changed the propietary stuff to standard measurements). The v2 was already stellar but I got tired of replacing flimsy motors.
@buddyadkins2432 8 ай бұрын
Do they HDZero goggles have an interface connector for the analog de-interlacing module?? Regardless of mounting, is there any provision for connecting the module??
@FrequentFlyerRC 9 ай бұрын
Wow, so this bundle IS real! I saw another channel show this kit about a week ago but the link did not point to the HD bundle.
@NickBurnsFPV 9 ай бұрын
ah yea, the date emax released the imbargo was in flux for what felt like weeks. How are you doing these days/
@Big_Balls_Network 9 ай бұрын
i was thinking of after I've learned the cetus pro to get this hd drone but the connector really annoys me because I'm confused on why the didn't include some 2s batteries and emax could've placed the battery at the bottom to stop bending the antenna
@joecachia2 9 ай бұрын
cool vid. Are the included Transporter goggles compatible with 'normal' HDZERO quads available as usual BNF ? Also from the various reviews I've seen , most footage has lots of artifacts even at close range. is this normal with HDZERO
@NickBurnsFPV 9 ай бұрын
yes, the compatibility is built into the firmware, the modes we can get are dependent on the camera we are running. not all hdzero cameras support all modes.
@igorfernandeslobo 5 ай бұрын
Nice vídeo!!, Did anyone make a change to the trhust linearization?I have been suffering from this problem, when zero acceleration the drone swings in the air
@boom7837 9 ай бұрын
Hey do you know if this drone uses spi Elrs or an integrated external module. Myne is coming in the mail and I am curious. I am asking bc I couldent find this info anywhere or the fc that is being used. Emax truly has garbage documentation where the drone is listed. I ask bc I just got the bnf analog version
@IsaacSchultz-lz8jc 9 ай бұрын
On my th 2 fr I use a dual bt 2.0 and it is just a good idea if you want to use 2 single cells and you can buy gnb a30 batteries
@NickBurnsFPV 9 ай бұрын
yes, either is better than ph2.0. It took this hobby several years to move from ph1.25 to ph2.0, we now have much better connectors to option to.
@haydenwestbrook7841 6 ай бұрын
this seems like good value, thanks for the review! earned a sub. can this transmitter be bound to other BNF drones? assuming they are using the correct receiver
@NickBurnsFPV 6 ай бұрын
Yes, it can be bound to other receivers. I do suggest getting the ELRS version for greatest control link and compatibility.
@hs7ehfheuezdhji 9 ай бұрын
Have the same white goggles.
@NickBurnsFPV 9 ай бұрын
The HDZero goggles or the Emax Transporter?
@FrogHopper23 9 ай бұрын
Hey Nick how did the image look in your HDZero goggles? Could you show the two different images with the cheap version and the inexpensive goggles?
@NickBurnsFPV 9 ай бұрын
That's a good question. That's a good question. I would fully expect the hdzero googles to have better reception as there are 4 antenna, but a side by side would be a good way for everyone to see what each has to offer or not.
@LockJawFPV 9 ай бұрын
Need to dona review on that he and hd goggles night time mode I think it has that were you can basically see at night bubby and drib just did a video and I was astonished at how well the view was in pitch black
@Master.Flames 9 ай бұрын
Will the controller and goggles be able to bind to other drones of the right receiver and channel?
@haydenwestbrook7841 6 ай бұрын
this!
@talksickFPV 9 ай бұрын
Hey Nick. Long time no talk. Hope you’re doin well. I think I’ve heard you mention this before, but what rates do you use for indoor whoop flying? I could have swore I heard you mention one time that you run stock, but just wanted to verify? Thanks. Great video, per usual!
@NickBurnsFPV 9 ай бұрын
I am doing well. Keeping all the wheels moving :) I don't fly stock but I do have a video on my rates/setup kzfaq.info/get/bejne/otKge8aItt6coWw.html
@xxmgz331 6 ай бұрын
Nice video, question what batteries you was using in that first flight, I’m using the normal battery 650 and the drone goes very slow, when I do flips it doesn’t have that enough power , I don’t know if I have to tuned the drone on bettafly?
@NickBurnsFPV 6 ай бұрын
I used the batteries it came with or some I had on hand of the same spec. I think what your looking for is faster rates. The rates control how quickly the quad responds to our stick inputs. I have a video on my rates here kzfaq.info/get/bejne/otKge8aItt6coWw.html
@xxmgz331 6 ай бұрын
@@NickBurnsFPV thx
@benjaminevert8720 3 ай бұрын
I’ve seen another option for a frame type for this drone. I’m curious if there’s any difference in the parts of the drone or if it’s just the frame? And also which frame would you recommend?
@NickBurnsFPV 3 ай бұрын
I couldn't talk about compatiblity there is no reference to any other frame and I have gone looking for another frame for it. The biggest issue can be the motor mounting hold pattern and dimensions.
@andreastornesel8404 9 ай бұрын
Hope it commes with walksnail, i like my analog version, exept for the frsky
@NickBurnsFPV 9 ай бұрын
No word on that option at this time
@mwmwstone3212 9 ай бұрын
Thanks a lot for the review. I’m thinking about getting this kit as a beginner. I would like to upgrade the quad in the future with the same goggles. Can we use the transporter 2 HD goggles with another HDzero quad also?
@NickBurnsFPV 9 ай бұрын
yes, the hdzero goggles whether the transporter or others compatible with other hdzero vtx and cameras.
@mwmwstone3212 9 ай бұрын
@@NickBurnsFPV thank you for the answer. 👍
@scu-dub 9 ай бұрын
Nice kit I just think the ph2 connectors is horrible however I was wanting those gogs to try out hd zero before I got the hd zero gogs it's good to have a detachable monitor especially with the regulations is the receiver elrs or frsky🤔
@NickBurnsFPV 9 ай бұрын
my receiver is elrs. They might have an frsky option, but I haven't looked at the product page yet.
@scu-dub 9 ай бұрын
@NickBurnsFPV awesome I was hoping for elrs😁👍🏼✌🏽
@user-xw4gr9qb8g 2 ай бұрын
Im looking to buy my first fpv drone and it’s between tinyhawk and cetus which one would you recommend
@NickBurnsFPV 2 ай бұрын
I suggest the tinyhawk, it has been more popular with those starting out. The cetus is more for indoor starting out.
@BodyTransformerss 8 ай бұрын
@nickBurnsFPV hey I just got into the hobby and I wanted to buy the tiny hawk 3 freestyle plus kit but there out of stock so I pre ordered the HD without the kit can I bind this to my radio master zorro ? Also what HD googles can I get to make my fist kit ? That’s not that expensive
@NickBurnsFPV 8 ай бұрын
if the zorro is elrs as well as the quad yes it will bind, but the version of elrs must be the same major versions on both. There aren't a lot of hdzero goggles. The emax transformers for hdzero, the fatshark scout hd are likely the two least expensive options.
@Shooting-Up 3 ай бұрын
This plus version is elrs?? then the e8 controller included is elrs also Have you tried binding that controller to other elrs drones or does it just work with emax?
@NickBurnsFPV 3 ай бұрын
I haven't tried to bind the radio to other elrs receivers. In premise it should bind with any other elrs receiver as long as both are on the same major elrs version.
@Shooting-Up 3 ай бұрын
@@NickBurnsFPV thanks. I’m going to order the draknight and see if it will bind
@alexwolfe957 9 ай бұрын
Hey I have a question about my jumper t lite, the system button has stopped working and I already updated the radio to the latest edge tx version, is this a common problem with the jumper t lite?
@NickBurnsFPV 9 ай бұрын
I have not heard or read of this issue.
@georgeaura 9 ай бұрын
What kind of range would you expect on this or similar setups?
@NickBurnsFPV 9 ай бұрын
it will depend greatly on environment. Clear line of sight.....more than a mile. I don't test range as that would break faa regulations. I have seen hdzero tested in video well beyond 10 miles.
@rcgoodtimes6657 9 ай бұрын
Ive always wanted an HD DVR RTF (I’m intimidated by custom building) is this what I’ve been waiting for?
@NickBurnsFPV 9 ай бұрын
depends on budget and how you see it.
@ahx1314 9 ай бұрын
Will there be a walksnail version? It would be a beast
@NickBurnsFPV 9 ай бұрын
No word on if walksnail will be a future option.
@KazanskyAlex 9 ай бұрын
Great Review of the greatest RTF fpv drone Is it possible to use dongle and use only one connector with 2S battery (I will buy separate) ???
@NickBurnsFPV 9 ай бұрын
I believe so but the performance will be very low, it will only be capable of flat slower flight.
@KazanskyAlex 9 ай бұрын
@@NickBurnsFPV Why ? It will be 2S battery Or it can't work on full power through the only one connector ?
@NickBurnsFPV 9 ай бұрын
@@KazanskyAlexoh sorry I missed the detail that it would be a 2s battery with using just one of the ph2.0 connectors. It should work normally with the typical ph2.0 limitations. I don't expect full 2s performance using a single 2s battery with one ph2.0 connector. That connector isn't rated for 8.4v (2s), and thus would be a energy limiting factor.
@KazanskyAlex 9 ай бұрын
@@NickBurnsFPV Thank you
@nnaemekankulume6341 9 ай бұрын
where would the bind button be located if i bought the bnf version?
@NickBurnsFPV 9 ай бұрын
binding instructions are in the manual. If you don't have the manual it can be located on the emax website.
@mummyscootmagoo4365 3 ай бұрын
Hi where is the bind button on this drone I can’t find it thanks
@NickBurnsFPV 3 ай бұрын
page 9 of the manual here drive.google.com/file/d/1DqgYbF8dpg1VKPmHhgF5KfuCYgggyHAK/view
@olivierf.4931 9 ай бұрын
no xt 30 is a bit cheap from max...
@mx118racer 6 ай бұрын
This controller weirdly interests me . Those gimbals look the same as the dji black v1 transmitter . Similar overall form factor too . These are elrs too correct ? This maybe an option for quads i run with o3 system , as its hard switching between different gimbal throw between systems . Anyone have input what range and usage of this transmitter is like
@NickBurnsFPV 6 ай бұрын
becareful. Whle better than a good many radios in starter kits, the gimbals aren't as smooth as more expensive controllers. Yes, it does come in and ELRS version.
@erikvf7 9 ай бұрын
Great review Nick. Unfortunately EMax seems to be stuck in the past with some of their product decisions.
@NickBurnsFPV 9 ай бұрын
Specifically the ph2.0.
@erikvf7 9 ай бұрын
@NickBurnsFPV Specifically that! I would mention the radio protocol, if it was ELRS or not, I didn't noticed if you mentioned it in the video. But on Emax website I confirmed it's indeed ELRS. 👌
@NickBurnsFPV 9 ай бұрын
@@erikvf7 your right I didn't clarify that. It is ELRS.
@The_Droner 3 күн бұрын
sweet
@mmmasterscross7915 7 ай бұрын
Nick could you tell what cable you used hook up to the computer ?
@NickBurnsFPV 7 ай бұрын
The cable should be included with the kit. There are some very cheap usb cables that are charge only, these won't work to connect a drone to a computer. The cable needs to be charge and data cable. We also have to install the drivers listed on the front page of the betaflight configuration applications in the lower left.
@mmmasterscross7915 7 ай бұрын
@@NickBurnsFPV Thanks
@shmurkles6652 9 ай бұрын
I was patiently waiting for the TH2 FS to go on sale since LAST NOVEMBER, earlier this spring I was excited to hear that a new TH FS was in the works. As someone on a budget (college), could you honestly recommend buying a new one of these over picking up a used kit? Is the performance difference between the HDZERO and analog really worth $200? It seems like digital transmission is the new big gimmick of this one, so I feel like I would be missing out. What's your recommendation for a $300 budget?
@NickBurnsFPV 9 ай бұрын
For those on a budget not interested in HD analog is going to be the way to go for price and performance. Now what do you chose kit or individual components. This will depend...how comfortable you are with computer stuff and how much patience you might have. If we have good patience and are fairly okay with computer stuff we can save on buying individual parts and will get something with more performance and/or durability. But if we are the opposite then paying for a kit will bring more satisfaction and ensure we actually get to fly. Now what to buy has so many questions. Inside, outside flight, performance or durability, how much space do we have or plan to have....?
@shmurkles6652 9 ай бұрын
@@NickBurnsFPV I always thought the tiny whoops were lame and kinda want it as a reason to fly outdoors. I'm in a smaller town so I definitely want it to be outdoors. I have a lot of experience with computers and have done some soldering. I've never had a drone or anything FPV, but I have played games with similar controls, played some sims, and flown an RC plane. I have time I could set aside to do these things (I have a project car and have potato cannons n things). Should I do some research on build guides?
@NickBurnsFPV 9 ай бұрын
@@shmurkles6652Building has a set of useful skills and knowledge that we gain during that process. It can be frustrating and test our patience as well. Generally building costs more than buying a kit or bnf, even if the building goes without us making a mistake or otherwise. With that it really depends on own own priorities and how we value them. A bnf will get us in the air faster and cheaper. Building will test us but build the troubleshooting and fixing skills. A BNF isn't without a knowledge gain, with it being built we essentially have it built correctly and if we need to make a repair we have a "wire map" at our disposal. Hopefully that helps some in making your decision.
@shmurkles6652 9 ай бұрын
@@NickBurnsFPV building being more expensive makes no sense to me. I guess they have their suppliers optimized to reduce consumer costs. If it's cheaper I don't have any issues not building it, and I feel fine doing repairs. Is it possible to get into the 2.5"+ freestyle hobby for under $300?
@NickBurnsFPV 9 ай бұрын
@@shmurkles6652 $300 total, goggles, radio, quad a battery or two and a charger? HD or analog?
@SunriseWaterMedia 9 ай бұрын
I realize you mentioned that you didn't fly with the RTF goggles, but did you notice the battery life? On Kelly's videos (Ready Set Drone) the battery life was between 25 to 35 minutes, depending on which physical goggle was used.
@NickBurnsFPV 9 ай бұрын
That certainly isn't the case. I charged them once and tried them out about 4-6 flights, then switched to my hdzero goggles. I have both freestyle RTF kits, I would say at least 50 minutes of run time. Could vary depending on the ambient temperature as they do have a fan and if the fan is running and running fast to cool with high ambient temps I suppose that could shorten battery life some.
@SunriseWaterMedia 9 ай бұрын
@@NickBurnsFPV Wow, ok. I guess there are large battery life variances. Thanks.
@NickBurnsFPV 9 ай бұрын
@@SunriseWaterMedia Yes, it could be the fan too, especially in direct sunlight. Many of the flights it was or near 90F.
@Master.Flames 9 ай бұрын
@NickBurnsFPV Will the controller and goggles be able to bind to other drones of the right receiver and channel?
@elchapo2440 9 ай бұрын
So Nick i was looking and comparing stats on paper from the tinyape and the th3 freestyle anolog and ut seems that the tinyape is still better im not sure if im correct but the runcam atom-w dosnt seem as good as nano 4 is that something tou can say or is the new th3 a better option kinda stuck.
@NickBurnsFPV 9 ай бұрын
I would agree the tinyape is a better performer as long as we get the better camera option. The only item I can't measure is customer support or product support.
@elchapo2440 9 ай бұрын
@NickBurnsFPV Also I've seen the stock 1s lipos are 57mm long you think a 64mm battery would fit on there I was planning on xt30 right away but was looking at 530mah and 550mah the 550s are 69mm so probably not those but I'm iffy on the 64 it seem it would fit or hang over there's not really to much pecifications on the length and stuff like that.
@NickBurnsFPV 9 ай бұрын
@@elchapo2440yes it will fit. 7mm isn't much
@elchapo2440 9 ай бұрын
@NickBurnsFPV sorry for all the questions but honestly do you think 69mm would fit it seems there a fair 0.5-1 cm gap from the edge and that's 10mm if it is 1cm and if that's true in theory you can fit 67mm battery's but I can't call it for sure the videos can be deceiving sometimes it could be bigger or smaller can you test fit a 550mah 2s to call it forsure I'm looking at the ruler and think that 57mm to 69mm battery could be possible but not fully sure. I'm just pushing for 550mah, there the smallest with 100c all 530mah have 90c or less.
@NickBurnsFPV 9 ай бұрын
@@elchapo2440 The battery can be shifted or longer and hang over the front end of the frame. At some length and at a high camera angle we might see the battery.
@jimmyfrattalone8224 9 ай бұрын
Is this better than the sub250 whoop16 RTF kit?
@NickBurnsFPV 9 ай бұрын
Its going to depend on cost and individual evaluation, and any sort of less than 20/20 vision one has. Also have to weigh how important inside flight is or the sort of flight performance one is wanting when starting.
@DanielSchnitzer-n7f 24 күн бұрын
How do I set up the TinyHawk to power up and fly on a 1S battery?
@NickBurnsFPV 23 күн бұрын
It can't. This is a 2s quad. it needs either 1 2 cell battery(modification) or 2 1 cell batteries.
@DanielSchnitzer-n7f 22 күн бұрын
@@NickBurnsFPV Wrong. It can fly on 1S, you just need to put the included "loop" plug into one of the two JST connectors. I just learned this the other day and it works perfectly fine.
@kaskalo2 9 ай бұрын
Are these goggles for HDZero only? I thought you would need deep pockets to buy HDZero (or any HD) goggles, and now they come as a part of a cheap kit? And I also see no one pays attention to that fact. Seems like I am back go square 0 on understanding the goggles world. Can these be used with any other system? Analog? Other HD?
@NickBurnsFPV 9 ай бұрын
Yes, the HDZero kit is for HDzero only. They do have an analog version available.
@kaskalo2 9 ай бұрын
@@NickBurnsFPV but isn't this like the budget version? Until this, my idea of any type of HD goggles is more than 500$. This is probably like 70 or something. How is this not a big deal? I know it's not that good of a quality, but 70$ HD goggles? How is this not a thing? 😳
@NickBurnsFPV 9 ай бұрын
@@kaskalo2 Yes, the cost of the goggle for hdzero is a good budget goggle for hdzero. Though its a better deal as a kit than buying alone, I see the goggles purchased alone is $239.99US
@BertoLaredo 6 ай бұрын
How do I know when the 1S batteries are charged? They have had a solid green light for 1 hour since I turned it on. Where there is no battery the green light flashes. Where I have both batteries installed it is a solid green light. When the charge is finished, does it turn a different color or does the green turn off? They have been charging for 1 hour
@NickBurnsFPV 6 ай бұрын
Not sure and the manual doesn't detail this. I suspect from the manual full charged is solid green light. a way to check battery voltage is to plug in the battery to the quad and look through the goggles at the on screen battery voltage, depending on version full battery would show something between 4.08 volts to 4.2 volts.
@BertoLaredo 6 ай бұрын
@@NickBurnsFPV 8.24v puts me on screen
@NickBurnsFPV 6 ай бұрын
@@BertoLaredo Okay, yes that is about right. I forgot this one uses 2 1s batteries, so the fully charged batteries would be 8.4 at most 8.45, but after we plug in some of the voltage is used to power the quad.
@BertoLaredo 6 ай бұрын
@@NickBurnsFPV So I have them loaded whole. When should I turn off the drone after flight when it drops to 3.20v? I am a beginner with a drone
@NickBurnsFPV 6 ай бұрын
@@BertoLaredo stop at about 7volts.
@RoslynStallenberg 4 ай бұрын
Where can I get it I live in South Africa
@NickBurnsFPV 3 ай бұрын
I don't know. I don't know any fpv shops in South Africa....something to google there.
@diggsit69 9 ай бұрын
Nick, tell Emax to put an XT 30 🔋 connector on the Tinyhawk Freestyle the 2 Battery Connector SUCKS. an I don’t know why they haven’t change it yet! And the 2 battery wires always break off when bending the wires back an forth to connect and I had to repair the 🔋 wires too!🙏
@NickBurnsFPV 9 ай бұрын
Essentially this video is me telling them that. :)
@leonardterlevic4765 9 ай бұрын
And they're still using 2 1s batteries??? I have bough the tinyhawk 2 freestyle years back and the first and most important mod are proper 2s batteries with an xt30
@NickBurnsFPV 9 ай бұрын
I would prefer xt30 as well.
@brundle_fly5123 9 ай бұрын
The radio and quad are forgettable for the most part, but those goggles have me intrigued. I'm not a fan of the WS VRX, especially the weight and wires hanging off my skyzones. Those Emax goggles standalone are not much more $ than the HDZero VRX (plus 4x antenna too) I'm am a pro-box goggle pilot, and the value of those goggles is hard to ignore!
@NickBurnsFPV 9 ай бұрын
Are you using box goggles now? If so which ones?
@brundle_fly5123 9 ай бұрын
I actually have skyzone 04Ls, but started with the old ev800D's. My astigmatism and the adjustable focus don't 'see eye-to-eye' super well, plus the extra weight out on the end of my nose from the VRX could be avoided @@NickBurnsFPV
@jondoe6618 9 ай бұрын
hey!, I kinda like that mini quad! Dont have one but it looks fun!
@brundle_fly5123 9 ай бұрын
TH freestyle was my 1st ever quad, so I totally understand. I didn't catch if the motors are still custom sized to the frame, and other emax nonsense like the old ones@@jondoe6618
@NickBurnsFPV 9 ай бұрын
@@brundle_fly5123 Sorry, I might be confusing myself. You don't like a vrx hanging off the front of box goggles or the skyzones'?
@BertoLaredo 6 ай бұрын
How to link the station to the drone. Pressing the two arrows in?
@NickBurnsFPV 6 ай бұрын
If you bought the kit it should be linked/bound out of the box. Did something change? From page 7 of the manual
@NickBurnsFPV 6 ай бұрын
1.3.1 Binding & Unbinding Entering Binding Mode for E8 Transmitter (ELRS-2.4G): Start by powering on the E8 Transmitter (ELRS-2.4G). Then, simultaneously press the "L4+" and "R3-" buttons and hold for 1 second. A sound prompt will be heard, and the central indicator light will alternate between green and red flashes, indicating that the transmitter has entered Binding Mode. Entering Unbinding Mode for E8 Transmitter (ELRS-2.4G): Begin by powering on the E8 Transmitter (ELRS-2.4G). If it's already successfully bound to the flight controller, then simultaneously press the "L4+" and "R3-" buttons and hold for 1 second. A sound prompt will be heard, and the central indicator light will alternate between green and red flashes, signifying that the transmitter has been unbound from the flight controller. 1.3.2 Button
@NickBurnsFPV 6 ай бұрын
Here is the manual drive.google.com/file/d/1bixrN4FvYzBd-U1fiyvaQXKeH1KUSyef/view
@BertoLaredo 6 ай бұрын
@@NickBurnsFPV Thanks, I'll try it tomorrow. Yes, I bought the kit but it didn't come paired because I turned it on and didn't assemble the engines.
@Mk1DzL 2 ай бұрын
I’m looking to upgrade my son, he’s ready for freestyle and always wanting to rip my babyhawk O3. If you’d like to sell this RTF kit, hmu!
@Mupshot 9 ай бұрын
Link takes you to the whoop version fyi
@NickBurnsFPV 9 ай бұрын
Sorry I will correct
@Sugalime3D_FPV 9 ай бұрын
it looks 4:3 to 16:9 strech to me. Isn't it ?
@NickBurnsFPV 9 ай бұрын
This is how it came setup.
@johnkurpiewski3996 9 ай бұрын
They added the caps on the plug but left the wires the same length form the previous version.. that stinks !!Does it have the same motors as the last version? Frame looks wider on the struts. What is the weight ? Kinda left out some of the specs … For those of us who care.
@modquad18 9 ай бұрын
I think these motors were 12025’s, vs 1103 on the FS2. Same 7k rpm.
@81quiroz 8 ай бұрын
Could this be flown inside
@NickBurnsFPV 8 ай бұрын
inside as in a home? I wouldn't advise. The props would damage walls and furniture. inside in a gym or warehouse is much more feasible.
@81quiroz 8 ай бұрын
@@NickBurnsFPV ok I was looking for a drone I can fly inside but still have room to grow until my fund start to grow .
@Catiadr 9 ай бұрын
I wish I had a computer that could actually run a SIM but I keep fixing quads.
@NickBurnsFPV 9 ай бұрын
have you tried fpv freerider? It might have the lowest specs needed.
@modquad18 9 ай бұрын
All of your links point to the Tinyhawk III whoop. This one you reviewed should be called Freestyle, shouldn’t it? The name Tinyhawk has, in the past, always referred to the propeller-guarded whoop. And past Freestyles resembled this one.
@modquad18 9 ай бұрын
Yeah, just looked at their web site. This review is the Tinyhawk III Freestyle. Might want to update your title and links.
@NickBurnsFPV 9 ай бұрын
Ah crud. I will need to correct that. Thanks for calling it out.
@modquad18 9 ай бұрын
Sorry 😣
@NickBurnsFPV 9 ай бұрын
@@modquad18 No worries, I appreciate you and others bringing it to my attention.
@pirateradioFPV 9 ай бұрын
New Emax quad? I bet there's a new Kabab video about it, seems to be the only company that brings him back from the hiatus 👀
@NickBurnsFPV 9 ай бұрын
Very well could be. Does he carry the quad or even emax components in his shop?
@pirateradioFPV 9 ай бұрын
@@NickBurnsFPV No idea what's the deal there, maybe just gratitude for them noticing him and giving him a nod at some point of his FPV life. I just find it amusing 😇
@NickBurnsFPV 9 ай бұрын
@@pirateradioFPV I thought at one point he might have been flying buddies with some of the emax pilots...not sure though
@guyrandom6151 8 ай бұрын
3 weeks later its sold out
@FlyingBuzzard 9 ай бұрын
Appears to have some break up not much different than analog , or is it just me who thinks that ?
@erv5890 9 ай бұрын
HDZERO breakup is worse than analog.
@FlyingBuzzard 9 ай бұрын
Thank You, It appeared that way to me to...LOL@@erv5890
@Ozkar2023 5 ай бұрын
Still don't understand why real size helicopters are so slow and dont have 4 propellers like a drone
@ravenovatechnologies6554 16 күн бұрын
Um full size helicopters are slow? 😅
@Nik_FPV621 9 ай бұрын
2.
@NickBurnsFPV 9 ай бұрын
so so close
@Nik_FPV621 9 ай бұрын
@@NickBurnsFPV 😂
@alexwolfe957 9 ай бұрын
1.
@NickBurnsFPV 9 ай бұрын
you are #1
@alexwolfe957 9 ай бұрын
@NickBurnsFPV What do you think about the Skyzone cobra S or X what's the difference and which one is the best deal
@NickBurnsFPV 9 ай бұрын
@@alexwolfe957The x are better image quality. I don't recall the differences other than the screens. Best deal depends how much one values a feature or specification vs the cost.
@mikelbcn91 9 ай бұрын
ATTENTION, I DO NOT recommend tinyhawks to anybody. Their AIO boards are overpriced and break a lot. Same with motors, non standard and emax motors are super expensive. I started with tinyhawk S, then tinyhawk 2, then tinyhawk freestyle. I ended up buying 8 AIOs over time, they're over 80 euros each, while other similar performing AIOs are 40-50 normally. Reviewers on KZfaq don't keep flying these RTF kits after the reviews and their durability is not questioned.
@NickBurnsFPV 9 ай бұрын
I would offer two potential tips for all micros with AIO. Disarm immediately on crash, and don't use turtle mode with obstructed props. I have often received frustrated comments on AIO. These tips I have received positive feedback from others.
@kavorka8855 2 ай бұрын
too expensive for a beginner
@sugmanutz327 7 ай бұрын
Can you use the controller on simulators?
@NickBurnsFPV 7 ай бұрын
yes if the computer supports blue tooth. I don't recall what has to be done with the radio to enter bluetooth mode, but its in the manual.
CAPTAIN DRONE
Рет қаралды 49 М.
Nick Burns
Рет қаралды 30 М.
ОВР Шоу
Рет қаралды 8 МЛН
Bacon Ninja FPV
Рет қаралды 37 М.
Matt Pochwat
Рет қаралды 579 М.
FISPECKT
Рет қаралды 208 М.
lev89k
Рет қаралды 2,3 МЛН