Tips and Tricks for making Turkey Diaphragm Mouth Calls

Рет қаралды 11,904

Күн бұрын

Here’s a few tricks I’ve learned throughout the years while making these calls. There’s many ways to do this but this is what works for me. I hope there is something you can use in this video if you make calls. If you just like watching some of the ways I do this then thanks for watching. Also if you want to order some calls feel free to reach out to me on Facebook just search Gobbler Sniper.

Пікірлер: 58

@rob701TurkeyGuy 6 ай бұрын

Glad to see something diaphragm call related on KZfaq. I want to learn to make my own versus buying them every year. My saliva I eat through calls and I always have one in my mouth. I have looked all over and found nothing on making calls

@joecoffman284 4 ай бұрын

I don't care what anybody says, I like how you explained it and how you done it so I'm going to do it just like you done it and that way everything orta be did right. Don't you think? I really enjoyed your video. Thanks man. Turkey season is right around the corner here in north Alabama. "Gobble Gobble ghee and a Gobble Gobble good. Safe and happy turkey huntin' to you."

@gobblersniper 3 ай бұрын

Thank you so much. If you need anything reach out to me

@geraldkoch394 3 жыл бұрын

Man that’s nice

@gobblersniper 3 жыл бұрын

Thanks

@danblatt3187 3 жыл бұрын

Good Video

@gobblersniper 2 жыл бұрын

Thank you

@joshsmallwood1 3 жыл бұрын

Great video! Just ordered a press and cutter. Where would you recommend learning how to cut the latex? I know a little about cuts and what each cuts are called, but I’m looking for where you may have learned tips on cutting it?

@gobblersniper 3 жыл бұрын

It’s honestly trial and error

@gobblersniper 3 жыл бұрын

Start with v cuts then go from there

@TRKYHTR1 Жыл бұрын

Not all mouth calls are made the same. Good job.

@gobblersniper Жыл бұрын

Thanks

@appalachianathlete491 3 жыл бұрын

Awesome video! I’m an ole boy from West Virginia looking to get into making calls for my family and I. I’ve looked on KZfaq and have read a few articles about how to get started in making some mouth calls, however I can’t find anything on where to buy the supplies needed (latex, tape, etc). Any chance you could point me in the right direction? I’d also like to find a press similar to yours so that I can make the most professional call I can.

@gobblersniper 3 жыл бұрын

Feather ridge has the press . Pioneer turkey call supplies for supplies

@mikealrichards508 3 жыл бұрын

My advice is to get the Feather Ridge Press from Thad Bright they are the gold standard. Pioneer game call supplies and Michell Johnston of Dead End Game Calls for latex, Tape & Proph.

@23KCOutdoors 2 жыл бұрын

How do you get the tape with your stamp on them

@gobblersniper 2 жыл бұрын

Stamp it with waterproof non toxic ink

@lukeg5184 Жыл бұрын

Where do you get the stamp to put a custom logo on the tape?

@gobblersniper Жыл бұрын

Someone local made it for me.

@lucasbarber4285 3 жыл бұрын

I’ve been making calls for a bit now but cannot find a cutter anywhere and really need that consistency before adding them to my small business, what brand cutter do you use and where could I find one?

@gobblersniper 3 жыл бұрын

Look up Thad Bright on Facebook feather ridge custom calls

@lucasbarber4285 3 жыл бұрын

@@gobblersniper thanks man!

@travisgodwin7775 3 жыл бұрын

What thicknesses of latex sheets do you use??

@gobblersniper 3 жыл бұрын

.004 and .003

@23KCOutdoors 2 жыл бұрын

What’s your tension for bat wings

@gobblersniper 2 жыл бұрын

I make several different ones

@jonpatterson5668 3 жыл бұрын

Hey man , I see you're in Kentucky, what part

@gobblersniper 3 жыл бұрын

lily ky

@476fireman 3 ай бұрын

Is there a way to make a mouth call without latex for someone who is allergic?

@gobblersniper 3 ай бұрын

Im not sure.

@huntinclass5042 2 жыл бұрын

Do you laser engrave your logo on your mouth calls?

@gobblersniper 2 жыл бұрын

No I use a stamp

@vickiemorriston4378 4 ай бұрын

Where do you get your stuff from

@gobblersniper 3 ай бұрын

Pioneer and dead end

@nickroy1785 3 жыл бұрын

Where did you get the presses from?

@gobblersniper 3 жыл бұрын

Feather ridge

@gobblersniper 3 жыл бұрын

Or Thad Bright

@nickroy1785 3 жыл бұрын

@@gobblersniper Thanks. Do I have to message him on Facebook because I am having some trouble finding it online?

@gobblersniper 3 жыл бұрын

Look for Thad Bright with Featherridge on Facebook

@nickroy1785 3 жыл бұрын

@@gobblersniper Ok thanks

@connorduncan5145 3 жыл бұрын

How do you get your logo on your tape?

@gobblersniper 3 жыл бұрын

I use a stamp and an ink pad I think the ink brand is archer or something I would have to check. I had someone that does laser engraving do the stamp for me. I also stamp the tape before I frame the calls. Stamping tape is first thing I do.

@mikealrichards508 3 жыл бұрын

Connor I build a jig and stamp set if you are interested I can send you some information on it. It centers the stamp to the tape and makes it consistent marking every time. Look me up on Facebook and send me a PM

@GarrettHarperofficial 3 жыл бұрын

Hey Mikeal could I get your Facebook please so I could pm on getting a custom stamp and stamp jig. If so that would be great

@mikealrichards508 3 жыл бұрын

@@GarrettHarperofficial Facebook is just under my name Mikeal Richards send me a message when you send the friends request. I dont accept requests without a message. Thanks,

@gobblersniper 3 жыл бұрын

Do you have a video uploaded of how the stamp works just wondering

@user-oy9lx5cv2k 2 ай бұрын

How much would it cost to start to make my own call

@gobblersniper 2 ай бұрын

It’s just according to what you want to put into it. There’s jigs and presses you just need to reach out to Thad Bright. Its more of a learning process than anything

@user-oy9lx5cv2k 2 ай бұрын

@@gobblersniper ok but where do I but my jig and press

@gobblersniper 2 ай бұрын

@@user-oy9lx5cv2k Thad Bright on Facebook

@user-oy9lx5cv2k 2 ай бұрын

@@gobblersniper thanks man