Tips for Getting Better Stainless TIG Welds

Tips for Getting Better Stainless TIG Welds | Everlast Welders

Рет қаралды 79,046

Күн бұрын

TIG Welding Stainless Steel doesn't have to be difficult. If you can TIG weld carbon steel, you can probably TIG weld stainless steel with a few welding technique adjustments and some tweaks to your setup. In this episode we're going to show you 4 tips for getting better stainless tig welds without breaking the bank!
The Everlast welders KZfaq channel is the only channel in the industry that is run by the welding community, for the welding community. Every week we will release a new episode taught by the best welders in their respective fields.
Everlast welders manufactures premium welding machines with industry leading features. We were the first to release an ACDC MIG, TIG, Stick machine and we continue to be on the front line of welding technology innovation. For more information on our welding power sources or to find the right welding machine for your application, visit www.everlastwelders.com.
#everlastwelders #weldmeanweldgreen #learnwelding

Пікірлер: 38

@ol-man-duffyj688 2 ай бұрын

Thanks Chris you helped me way more than the bigger vids out there just saying to stop adding heat. Thanks for the arc length explanation and showing how to set up a gas lens attachment and #12 cup. Bug help.

@Welddotcom 4 жыл бұрын

Excellent demonstration as always guys.

@phatpizza610 4 жыл бұрын

Finally someone that shows me some things to check as to why I’m getting the grey, was confusing me as it was only happening when using filler wire, guess was prob a combination of a few things

@22strokes 4 жыл бұрын

Great! I learned something today thanks to you! I definitely need to keep my arc length shorter

@Mike_Laird 4 жыл бұрын

Chris is the MAN!!!!!!

@michaelcostello6991 3 жыл бұрын

Fabulous lecture. One of the best(probably the best) lectures on stainless steel welding for beginners/novices. Thank you

@GoalOrientedLifting 3 жыл бұрын

Thank you! This have been the most helpful video I've seen so far, in Tig welding.

@stevenmcc6052 3 жыл бұрын

Chris. Best stainless vid on the tube.

@burrowssj 3 жыл бұрын

Thanks for this video, wish I'd seen this sooner

@phernayes 3 жыл бұрын

Super clear! Thanks a lot!!!

@MrRippsalot 4 жыл бұрын

I always run a gas lens. And go higher amps than i need with foot pedal variance to control my heat.

@radishfever 4 жыл бұрын

Good explanation.

@robertferrara4529 4 жыл бұрын

thank you

@JulioArioRayon 2 жыл бұрын

Excelente

@milesmoore5422 3 жыл бұрын

What was your stick out length ? Can you show some gas lens profile shots of you running at .01 to .02 arch length ? What was your CFH ? Pre-flow ? Post-flow ? What is the best grind for this weld metal thickness ?

@mikemattera9513 4 жыл бұрын

I would have like to seen the back side of the last weld.

@ypaulbrown 2 жыл бұрын

ye yes yes...great stuff

@wild12valve 4 жыл бұрын

What about gas flow vs cup size, etc?

@eveliomiguel8052 3 жыл бұрын

Thanks for adding subs in Spanish

@CucoGT2s 4 жыл бұрын

Hi Chris is Cuco996 Congratulations now you’re sharing knowledge good to learn from a celebrity. Yesterday I bought my first Tig 😎😎😎

@danl.4743 4 жыл бұрын

What movies is he in?

@everlastgenerator 4 жыл бұрын

Congrats on your first TIG

@harleyjune1233 4 жыл бұрын

would tig Al benefit with gas as well?

@indraverboden6256 3 жыл бұрын

👍👍👍👍👍👍.mantap

@luisalbertobohorquez1900 4 жыл бұрын

Deben hacer la traducción en español , en la parte inferior.

@idriwzrd 4 жыл бұрын

So you use both insulators with a gas lens? Where'd you find this guy, Everlast?

@billsimpson2392 4 жыл бұрын

👍

@buyafaruk2435 3 жыл бұрын

Hope it is useful

@tigmigevgeniilysenko 4 жыл бұрын

These are the ones who come to me, bring in drops, and they can’t stably hold the additive in the weld pool.

@ng4410 3 жыл бұрын

hello am in Australia.. Have a job that has a lot of steel flooring around job site. Laydown of electode a pain. Using a modern small inverter stick welder. Q) anywhere in USA / your company sell a stick electrode holder with ON OFF switch. ? Have never seem one. Only one on www is one for 12 v vehicle welders it seems. Seems a no brainer to have the option? any info appreciated. Has to deal with wide range amps no doubt.

@TheMasterizzatore 2 жыл бұрын

Why would you Need a switch for Stick welding?