Thank you for explaining this. finally got car to work at full forward power with reverse after too many hours - simple direct explanation

Thank you, I thought I had a bad receiver on my dbxl-e right out of the box. Turns out the instructions were wrong in telling you how to do this and you were right, now I have full lock to lock steering and reverse. You saved me having to call horizon or spektrum.

Great video. Thank you for sharing.

This fixed the steering issue that I had.

Super helpful, was not getting fully throttle / power

Thank you very much mi amigo. Ur video was very helpful👏🏼👊🏼 from Denver Colorado

Thanks heaps!! really appreciate it, I had no reverse 👌🇦🇺

Saved us, thanks!!

Thanks for the video. Helped a lot..... Thanks again

This worked for me to calibrate that BS goolRC ESC. 🤘🤘🤘

Very good, thanks..

You saved my Kraton lol I had to turn right and full brake tho for it to enter the mode

Awesome thanks

Thank you so much! The instructions in the user manual were not correct as opposed to the instructions in your video. You saved me a support call and a lot of time. Finally full reverse throttle 😀

Thank you soo much🙏🏻🙏🏻🙏🏻

Thank you so much

Thanx so much brother

This is how to burn out your steering servo. You need to have your car up in the air and set the end points for your right and left not go full adjust. Glad I was able to figure it out from this video though.

Just subbed

Very helpful video I just burned me 2 servo one yesterday wich was a hitec and one today wich was a kopro po digital servo and a friend told me its becouse my end point was not set on my throttle also it was so strong that I noticed the motor move when I was hitting the throttle yup

man nice work. I am having trouble with the dx5c?? same problem

Thank you

Thanks for the video. You would think that the manual would be a little more clear, but its simply terrible at explaining how to re-calibrate end points.

Now while doing this is your receiver in the car turned on? Or is it OFF

Ok thanks

When I turn left it goes right and viceversa and I use the steering switch on top and it won't fix it any idea how to fix this ?

I try to bind mine and it binds then the servo turns all the way one direction and I have no control bof anything no gas or steering but if I hit the bind button the servo steer's the other direction wtf is happening

Thank

Sounds like how to enter in a cheat code

I bind my dx2e to a sr315 reciever, the throttle and reverse is fine but my steering is backwards, will this fix that issue or do you know how to fix it?

weird, my green light doesn't flash on my DX2E from an Arrma Infraction when I full brake an turn the controller on.

Mine will not even start blinking when i hold full break and power on .... my controller has always worked fine, but the reciever (srs6000) orange light dosnt come on with or without the bind plug.... and everytime i try to go back and do the bind and callibrate the esc (dynimite fuse) has a blinkgreen to red flash and 1 beep every 0.5 sec.... its all matching stock 1/10 rock rey and my son is really preassuring me to make it work HELP

This video is kinda misleading if you say there are several versions of the same remote. I just tried it and my light stayed a solid green. Never blinked. Im actually trying to figure out how to do an alignment. My truck is pulling to one side when going forward.

so for end point settings you just make sure not to rotate steering fully?

What about a dx3

I'm trying to hook this up to my losi micro 1/24 rally car! Do not know how

My car I trun it on and it gos to the right and stays there any idas how to fix it ???

I cant get my dx2e remote too my srs4220 avc reciver to my losi 5th scale monster truck xl why cant i get this too work

Odd how you show none these adjustments actually functioning ? I followed a similar instructional video for adjusting the servo endpoints and now my e system components no longer work. And now the local Hobby Store is saying the RX is broken. They did not fix the car to operate properly. And now I have a dead duck expensive paper weight. I have a new FS GT5 but it will likely kill that radio system too if trying to bind to that to my SCX6. Why have the manufacturers made it so difficult to use this SCX6 ? And where are the default settings for these programs ?

So my truck does not need to be powered on to do this just controller

Ok so I have ecx ruckus I purchased a goolrc 4300 Kv brushless motor and I can't get the car to move at all any suggestions.

how do I use the 2 speed on my traxxas emaxx with this controller?

I've got 5 DX2E remotes. 3 of them calibrate just fine. 2 of them don't get the flashing light to start calibration and neither turns the steering servo very far. Any ideas why? Are there different models of these things?

Hold full brake and hold steering full right then turn on

Hey there, mine doesn't blink when I go full break or when I turn right and break any ideas?

Mine don’t blink when I brake but when I stirring it blinkz

I need to see how to install Bluetooth on DX2E

What if it doesn’t blink when you full reverse and then power on?

My light wouldn't flash in the beginning

When I brake it accelerates and when I accelerate it brakes?

Doesn’t work step 1

mine wont start flsing one i do full throttle and turn it on please help

What if its not flashing the grren light

When I followed your illustration, the green light does not flash. It comes on with no flashing. What am I doing wrong?

When I press foward and turn it on nothing happens any idea what can it be

Didn't work. Green light won't flash. Any ideas?

WTF really dude

Thank you so much